Residual stress engineering in friction stir welds by roller tensioning

Science and Technology of Welding and Joining

Volumn 14, Issue 2, 2009, Pages 185-192

  Altenkirch, J ^a,b   Steuwer, A ^c,d   Withers, P J ^a   Williams, S W ^e   Poad, M ^f   Wen, S W ^g  

^a UNIVERSITY OF MANCHESTER   (United Kingdom)

^b INSTITUT LAUE LANGEVIN   (France)

^c EUROPEAN SPALLATION SOURCE ERIC   (Sweden)

^d NELSON MANDELA METROPOLITAN UNIVERSITY   (South Africa)

^e CRANFIELD UNIVERSITY   (United Kingdom)

^f AIRBUS OPERATIONS LTD   (United Kingdom)

^g SWINDEN TECHNOLOGY CENTRE   (Netherlands)

Author keywords

Neutron diffraction; Residual stress; Roller tensioning; Stress engineering; Synchrotron X ray diffraction

Indexed keywords

ALUMINUM; ALUMINUM ALLOYS; FRICTION; GAS WELDING; NEUTRON DIFFRACTION; RESIDUAL STRESSES; ROLLERS (MACHINE COMPONENTS); ROLLING; STRENGTH OF MATERIALS; SYNCHROTRON RADIATION; SYNCHROTRONS; VICKERS HARDNESS; WELDS; X RAY DIFFRACTION;

AA 2024; ALUMINIUM ALLOYS; APPLIED LOADS; BUTT WELDS; DOWN FORCES; FRICTION STIR WELDS; LONGITUDINAL TENSILE; ROLLER TENSIONING; ROLLING PRESSURES; STRESS ENGINEERING; SYNCHROTRON X-RAY DIFFRACTION; WELD LINES; WELDING RESIDUAL STRESS;

FRICTION STIR WELDING;

EID: 60749117206     PISSN: 13621718     EISSN: 13621718     Source Type: Journal    
DOI: 10.1179/136217108X388624     Document Type: Article

References (37)

1. M. N. James, D. J. Hughes, Z. Chen, H. Lombard, D. G. Hattingh, D. Asquith, J. R. Yates and P. J. Webster: Eng. Fail. Anal., 2007, 14, 384-395.
2. P. J. Withers: Rep. Prog. Phys., 2007, 70, 2211-264.
3. R. S. Mishra and Z. Y. Ma: Mater. Sci. Eng.: R, Rep, 2005, 50R, 1-78.
4. P. L. Threadgill, A. J. Leonard, H. R. Shercliff and P. J. Withers: Int. Mater. Rev., 2008, to be published.
5. C. D. Donne, E. Lima, J. Wegener, A. Pyzalla and T. Buslaps: Proc. 3rd Int. Symp. on FSW, Kobe, Japan, September 2001, TWI. Published on CD-ROM.
6. L. D. Oosterkamp, P. J. Webster, P. A. Browne, G. B. M. Vaughan and P. J. Withers: Mater. Sci. Forum, 2000, 347-349, 677-683.
7. M. J. Peel, A. Steuwer, M. Preuss and P. J. Withers: Acta Mater., 2003, 51, 4791-4801.
8. A. Steuwer, M. J. Peel and P. J. Withers: Mater. Sci. Eng. A, 2006, A441, 187-196.
9. M. A. Sutton, A. P. Reynolds, D. Q. Wang and C. R. Hubbard: J. Eng. Mater. Technol., 2002, 124, 215-221.
10. P. J. Webster, L. D. Oosterkamp, P. A. Browne, D. J. Hughes, W. P. Kang, P. J. Withers and G. B. M. Vaughan: J. Strain Anal. Eng. Des., 2001, 36, 61-70.
11. D. G. Richards, P. B. Prangnell, S. W. Williams and P. J. Withers: Mater. Sci. Eng. A, 2008, A4S9, 351-362.
12. K. Masubuchi: in 'Encyclopedia of materials: science and technology', 8121-8126; 2003, Oxford, Elsevier Science Ltd.
13. K. Masubuchi: 'Analysis of welded structures', 600; 1980, Oxford, Pergamon Press.
14. X. L. Wang, Z. Feng, S. A. David, S. Spooner and C. R. Hubbard: Proc. 6th Int. Conf. on 'Residual stress', Oxford, UK, July 2000, Institute of Materials, 1408-1414.
15. J. Altenkirch, A. Steuwer and P. J. Withers: 2008, to be published.
16. ASM: 'ASM handbook' Vol. 6, 'Welding, brazing and soldering', 1094-1103; 2001, Materials Park, OH, ASM.
17. D. G. Richards, P. B. Prangnell, P. J. Withers, S. W. Williams, T. Nagy and S. A. Morgan: Proc. 7th Int. Symp. on FSW, Awaji Island, Japan, 2008, TWI. Published on CD-ROM.
18. E. M. van der Aa, M. J. M. Hermans, I. M. Richardson, N. M. van der Pers and R. Delhez: in 'Residual stresses VII, 479-484; 2006, Uetikon-Zuerich: Trans Tech Publications.
19. J. Altenkirch, A. Steuwer, M. Peel, D. G. Richards and P. J. Withers: Mater. Sci. Eng. A, 2008, A488, 16-24.
20. J. Altenkirch, A. Steuwer, M. J. Peel, P. J. Withers, S. W. Williams and M. Poad: Metall. Trans. A, 2008, 39(13), 3246-3259.
21. D. A. Price, S. W. Williams, A. Wescott, C. J. C. Harrison, A. Rezai, A. Steuwer, M. Peel, P. Staron and M. Kocak: Sci. Technol. Weld. Join. 2007, 12, 620-633.
22. P. Staron, M. Kocak, S. W. Williams and A. Wescott: Physìca B, 2004, 350B, 491-493.
23. W. Liu, X. Tian and X. Zhang: Weld. Res. Suppl, 1996, 75, 297-304.
24. Y. P. Yang, P. Dong, X. Tian and Z. Zhang: Proc. 5th Int. Conf. on 'Trends in welding research', Pine Mountain, GA, USA, ASM, June 1998, 700-705.
25. S. W. Wen, S. W. Williams, S. A. Morgan, A. Wescott and M. Poad: submitted to Sci. Technol. Weld. Join.
26. ASM: 'ASM handbook'. Vol. 2, "Properties and selection: nonferrous alloys and special-purpose materials'; 2001, Materials Park, OH, ASM.
27. G. Khelifati, V. Guillaumin, L. Naze and N. Laurrain: Proc. Conf. Aluminium 2006, Essen, Germany, September 2006, Essen Exhibition Centre, 4.
28. A. C. Larson and R. B. von Dreele: 'General structure analysis system (GSAS)', LAUR 86-748, Los Alamos National Laboratory, Los Alamos, NM, USA, 1994.
29. A. Steuwer, M. Dumont, M. Peel, M. Preuss and P. J. Withers: Acta Mater., 2007, 55, 4111-4120.
30. ILL: 'LAMP, large array manipulation program', available at: http://www.ill.fr/data--treat/lamp/lamp.htm1, Grenoble.
31. V. Hauk: 'Structural and residual stress analysis by nondestructive methods', 640; 1997, Amsterdam, Elsevier.
32. ISO/TTA3: 'Polycristaline materials - determination of residual stress by neutron diffraction'. Technology Trends Assessment; 2001, Geneva, ISO.
33. M. R. Daymond, M. A. M. Bourke, R. B. V. Dreele, B. Clausen and T. Lorentzen: J. Appl. Phys., 1997, 82, 1554-1562.
34. O. Frigaard, O. Grong and O. T. Midling: Proc. Conf. INALCO '98, 208-218; 1998, Cambridge, TWI.
35. M. J. Peel, A. Steuwer, P. J. Withers, T. Dickerson, Q. Shi and H. R. Shercliff: Metall. Mater. Trans. A, 2006, 37A, 2183-2193.
36. A. Steuwer, M. Dumont, J. Altenkirch, A. Deschamps and P. J. Withers: 2008, to be published.
37. M. Hutchings, P. J. Withers, T. M. Holden and T. Lorentzen: 'Introduction to the characterisation of residual stress by neutron diffraction', 424; 2005, London, CRC Press/Taylor & Francis.