Mechanical tensioning of high-strength aluminum alloy friction stir welds

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 39, Issue 13, 2008, Pages 3246-3259

  Altenkirch, J ^a   Steuwer, A ^b,c   Peel, M J ^d   Withers, Philip J ^a,c   Williams, S W ^e   Poad, M ^f  

^a UNIVERSITY OF MANCHESTER   (United Kingdom)

^b EUROPEAN SPALLATION SOURCE ERIC   (Sweden)

^c INSTITUT LAUE LANGEVIN   (France)

^d EUROPEAN SYNCHROTRON RADIATION FACILITY   (France)

^e CRANFIELD UNIVERSITY   (United Kingdom)

^f AIRBUS OPERATIONS LTD   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOYS; ALUMINA; ALUMINUM ALLOYS; ALUMINUM METALLURGY; ALUMINUM SHEET; FRICTION; LIGHT METALS; LITHIUM; METALLIC COMPOUNDS; RESIDUAL STRESSES; STRENGTH OF MATERIALS; STRESS CONCENTRATION; WELDING; WELDS; YIELD STRESS;

AEROSPACE ALUMINUM ALLOYS; ANGULAR DISTORTIONS; BENDING DISTORTIONS; FRICTION STIR WELDS; FRICTION STIRS; IN-SITU; MECHANICAL TENSIONING; RESIDUAL STRESS DISTRIBUTIONS; RESIDUAL STRESS STATES; STRESS REDUCTIONS; THICK PLATES; THIN PLATES; WELD MICROSTRUCTURES; WELD STRESSES;

STRESSES;

EID: 56349130153     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-008-9668-1     Document Type: Conference Paper

References (40)

1. M.N. James, D.J. Hughes, Z. Chen, H. Lombard, D.G. Hattingh, D. Asquith, J.R. Yates, P.J. Webster: Eng. Fail. Anal., 2007, vol. 14, pp. 384-95
2. P.J. Withers: Rep. Prog. Phys., 2007, vol. 70, pp. 2211-64
3. M.J. Peel, A. Steuwer, M. Preuss, P. Withers: Acta Mater., 2003, vol. 51, pp. 4791-4801
4. C.D. Donne, E. Lima, J. Wegener, A. Pyzalla, and T. Buslaps: 3rd Int. Symp. FSW, TWI, Kobe, Japan, 2001
5. L.D. Oosterkamp, P.J. Webster, P.A. Browne, G.B.M. Vaughan, P.J. Withers: Mater. Sci. Forum, 2000, vols. 347-349, pp. 677-83
6. P.J. Webster, L.D. Oosterkamp, P.A. Browne, D.J. Hughes, W.P. Kang, P.J. Withers, G.B.M. Vaughan: J. Strain Anal. Eng. Des., 2001, vol. 36, pp. 61-70
7. M.A. Sutton, A.P. Reynolds, D.Q. Wang, C.R. Hubbard: J. Eng. Mater. Technol., 2002, vol. 124, pp. 215-21
8. A. Steuwer, M.J. Peel, P.J. Withers: Mater. Sci. Eng., A, 2006, vol. 441, pp. 187-96
9. K. Masubuchi: Welds, Encyclopedia of Materials: Science and Technology, Elsevier Science Ltd., Oxford, United Kingdom, 2003, pp. 8121-26
10. K. Masubuchi: Analysis of Welded Structures, Pergamon Press, Oxford, United Kingdom, 1980
11. P.L. Threadgill, A.J. Leonard, H.R. Shercliff, and P.J. Withers: International Materials Reviews, 2008, in press
12. X.L. Wang, Z. Feng, S.A. David, S. Spooner, and C.R. Hubbard: 6th Int. Conf. Residual Stress, IOM Communications, Oxford, United Kingdom, 2000, vol. 2, pp. 1408-14
13. S.R. Bhide, P. Michaleris, M. Posada, J. DeLoach: Weld. J., 2006, vol. 85, pp. 189-95
14. P. Staron, M. Kocak, S.W. Williams, A. Wescott: Physica B, 2004, vol. 350, pp. E491-E493
15. D.A. Price, C.J. Harrison, S.W. Williams, A. Wescott, A. Johnson, J. Gabzdyl, M. Smith, and M. Rahim: BAe Systems Report No. JS 15232, BAE Systems, London, UK, 2004
16. D.A. Price, S.W. Williams, A. Wescott, C.J.C. Harrison, A. Rezai, A. Steuwer, M. Peel, P. Staron, M. Kocak: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 620-33
17. J. Altenkirch, A. Steuwer, M. Peel, D.G. Richards, P.J. Withers: Mater. Sci. Eng., A, 2008, vol. 488, pp. 16-24
18. D.G. Richards, P.B. Prangnell, S.W. Williams, P.J. Withers: Mater. Sci. Eng., A, 2008, vol. 489, pp. 351-62
19. S.W. Wen, S.W. Williams, S.A. Morgan, A. Wescott, and M. Poad: Sci. Technol. Weld. Joint., 2008, in press
20. J. Altenkirch, A. Steuwer, P.J. Withers, S.W. Williams, M. Poad, and S.W. Wen: Sci. Technol. Weld. Joint., 2008, unpublished research
21. P. Michaleris, J. Dantzig, D. Tortorelli: Weld. Res. Suppl., 1999, vol. 11, pp. 361-66
22. E.M. van der Aa, M.J.M. Hermans, I.M. Richardson, N.M. van der Pers, R. Delhez: Residual Stresses VII, 2006, vols. 524-525, pp. 479-84
23. V. Hauk: Structural and Residual Stress Analysis by Nondestructive Methods, Elsevier, Amsterdam, 1997
24. A.C. Larson and R.B. Von Dreele: General Structure Analysis System (GSAS), Los Alamos National Laboratory Report LAUR 86-748, Los Alamos National Laboratory, Los Alamos, NM, 2000, http://www.ccp14.ac.uk/ccp/ ccp14/ftp-mirror/gsas/public/gsas/manual/GSASManual.pdf.
25. T. Pirling, G. Bruno, P.J. Withers: Mater. Sci. Eng., A, 2006, vol. 437A, pp. 139-44
26. Large Array Manipulation Program, http://www.ill.fr/data_treat/lamp/ lamp.html
27. A. Steuwer, M. Dumont, M. Peel, M. Preuss, P.J. Withers: Acta Mater., 2007, vol. 55, pp. 4111-20
28. P.J. Withers, M. Preuss, A. Steuwer, J.W.L. Pang: J. Appl. Crystallogr., 2007, vol. 40, pp. 891-904
29. I.C. Noyan and J.B. Cohen: Residual Stress: Measurement by Diffraction and Interpretation, Springer-Verlag, New York, NY, 1987
30. G.A. Webster, ed., "ISO/TTA3, Polycrystalline Materials - Determination of Residual Stress by Neutron Diffraction," Technol. Trends Assess., 2001, vol. 3
31. M.R. Daymond, M.A.M. Bourke, R.B.V. Dreele, B. Clausen, T. Lorentzen: J. Appl. Phys., 1997, vol. 82, pp. 1554-62
32. J.W.L. Pang, T.M. Holden, T.E. Mason: Acta Mater., 1998, vol. 46, p. 1503
33. ASM Handbook, vol. 9, Metallography and Microstructures, ASM INTERNATIONAL, Materials Park, OH, 2001
34. M.M. Attallah, C.L. Davis, M. Strangwood: Sci. Technol. Weld. Joining, 2007, vol. 12, pp. 361-69
35. M. James, M.W. Mahoney, and D. Waldron: 1st Int. Symp. FSW, TWI, Thousand Oaks, CA, 1999
36. L.E. Murr, Y. Li, E.A. Trillo, R.D. Flores, J.C. McClure: J. Mater. Process. Manuf. Sci., 1998, vol. 7, pp. 145-61
37. M.W. Mahoney, C.G. Rhodes, J.G. Flintoff, R.A. Spurling, W.H. Bingel: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1955-64
38. K.A.A. Hassan, A.F. Norman, D.A. Price, P.B. Prangnell: Acta Mater., 2003, vol. 51, pp. 1923-36
39. M. Dumont, A. Steuwer, A. Deschamps, M. Peel, P.J. Withers: Acta Mater., 2006, vol. 54, pp. 4793-4801
40. P. Gomiero, F. Livet, Y. Brechet, F. Louchet: Acta Metall., 1992, vol. 40, pp. 847-55