CFD modelling of the shear layer around the tool probe in Friction Stir Welding

Friction Stir Welding and Processing III - Proceedings of a Symposium sponsored by the Shaping and Forming Committee of (MPMD) of the Minerals, Metals and Materials Society, TMS

Volumn , Issue , 2005, Pages 225-232

  Schmidt, Henrik ^a   Hattel, Jesper ^a  

^a TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

Author keywords

CFD; Friction stir welding; Material law; Shear layer

Indexed keywords

ALUMINUM ALLOYS; BOUNDARY CONDITIONS; COMPUTATIONAL FLUID DYNAMICS; COMPUTER SIMULATION; SHEAR STRESS;

FRICTION STIR WELDING; MATERIAL LAW; SHEAR LAYER;

WELDING;

EID: 31044438571     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (21)

1. Schmidt H and Hattel J 2004 "Heat Source Models in Simulation of Heat Flow in FViction Stir Welding" Proc. of 14th International Offshore and Polar Engineering Conference, Toulon, Prance
2. Schmidt H, Hattel J and Wert J 2004 "An Analytical Model for the Heat Generation in Friction Stir Welding" Modelling Simul. Mater. Sci. Eng. 12 143-57
3. Schmidt H, Hattel J and Wert J 2004 "Modelling of the Contact Condition at the Tool/Matrix interface in Friction Stir Welding" Mathematical Modelling of Welding Phenomena 7 in press.
4. Schmidt H and Hattel J 2004 "Modelling the heat flow around the tool probe in Friction Stir Welding" Sci. Technol. Weld. Joining accepted for publication
5. Khandkar M Z H and Khan J A 2001 "Thermal Model of Overlap Friction Stir Welding for Al-Alloys" J. Mater. Process. Manuf. Sci. 10 91-105
6. Comsol AB 2003/2004 "FEMAB User's Guide" FEMLAB 2.3 and 3.0
7. Aukrust T and LaZghab 2000 "Thin shear boundary layers in flow of hot aluminium" Int. J. Plasticity 16 59-71
8. Lesuer D R 2000 "Experimental Investigations of Materal Models for Ti-6Al-4V Titanium and 2024-T3 Aluminum" Technical report, FAA and DOB, USA.
9. Wert J A 2003 "Processing of Superplastic Aluminium Alloy" Center for Fundamental Research: Metals in Four Dimentions
10. Bendzsak G J, North T H and Smith C B 2000 "An Experimentally Validated 3D Model for Friction Stir Welding" 2nd Int. Symp. on Friction Stir Welding (Gothenburg, Sweden)
11. Reynolds A P, Deng X, Seidel T and Xu S 2000 "Finite element simulation of flow in friction stir welding" Proc. from Joining of Advanced and Specialty Materials (St. Louis, MO, ASM International) 172-7
12. Xu S, Deng X and Reynolds A P 2001 "Recent Advances in FSW Process Physics" Sci. Technol. Weld. Joining 6 191-3
13. Xu S and Deng X 2003 "Two and Three-Dimensional Finite Element Models for the Friction-Stir Welding Process" 4th Int. Symp. on Friction Stir Welding, Park City, UT, USA
14. Shercliff H R and Colgrove P A 2002 "Modelling of Friction Stir Welding" Math. Modelling Weld. Phenom. 6 927-74
15. Colegrove P and Shercliff H R 2003 "2-dimensional CFD modeling of flow round profiled FSW tooling" Proc. of Symposium on Friction Stir Welding and Processing II (Warrendale, PA, USA, TMS)
16. Colegrove P, Shercliff H R and Threadgill P L 2003 "Modelling and Development of the Trivex™ Friction Stir Welding Tool" 4th Int. Symp. on Friction Stir Welding, Park City, UT, USA
17. Askari A, Silling S, London B and Mahoney M 2001 "Modeling and Analysis of Friction Stir Welding Processes" Proc. of Symposium on Friction Stir Welding and Processing (Indianapolis, Indiana, USA, TMS)
18. Schmidt H and Hattel J 2004 "A local model for the thermomechanical conditions in Friction Stir Welding" Modelling Simul. Mater. Sci. Eng. accepted for publication.
19. Schmidt H and Hattel J 2004 "Modelling the thermomechanical conditions at the tool/matrix interface in Friction Stir Welding" 5th Int. Friction Stir Welding Symposium, Metz, Prance
20. Guerra M, Schmidt C, McClure J C, Murr L E and Nunes A C 2003 "Flow patterns during friction stir welding" Material Characterization 49 95-101
21. Schmidt H and Hattel J 2004 "An analytical model for prescribing the flow around the tool probe in Friction Stir Welding" FRICTION STIR WELDING AND PROCESSING III, TMS, USA submitted.