Mapping residual and internal stress in materials by neutron diffraction

Comptes Rendus Physique

Volumn 8, Issue 7-8, 2007, Pages 806-820

  Withers, Philip J ^a  

^a UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

Composites; Neutron diffraction; Residual stress; Smart materials; Structural integrity; Welding

Indexed keywords

EID: 36849062082     PISSN: 16310705     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.crhy.2007.09.015     Document Type: Short Survey

References (88)

1. Bragg W.H. Proc. Roy. Soc. 89A (1913) 246-248 8-77
2. Lester H.H., and Aborn R.H. Army Ordnance 6 (1925) 120-127 200-207, 83-87, 364-369
3. van Arkel A.E. Physica B 5 (1925) 208-212
4. Joffe A.F., and Kirpitcheva M.V. Phil. Mag. 43 (1922) 204-206
5. Hauk V. Structural and Residual Stress Analysis by Non-Destructive Methods (1997), Elsevier Science B.V., Oxford
6. Allen A.J., Andreani C., Hutchings M.T., and Windsor C.G. NDT International 15 (1981) 249-254
7. L. Pintschovius, V. Jung, E. Macherauch, R. Schäfer, O. Vöhringer, In: E. Kula, V. Weiss (Eds.), Residual Stress and Stress Relaxation, Proceedings of the 28th Army Materials Research Conference, 1981 July, Lake Placid, Plenum, New York, pp. 467-482
8. A.D. Krawitz, J.E. Brune, M.J. Schmank, In: E. Kula, V. Weiss (Eds.), Residual Stress and Stress Relaxation, Proceedings of the 28th Army Materials Research Conference, 1981 July, Lake Placid, Plenum, New York, pp. 139-155
9. Hutchings M.T., Withers P.J., Holden T.M., and Lorentzen T. Introduction to the Characterisation of Residual Stresses by Neutron Diffraction (2005), CRC Press, Taylor & Francis, London
10. In: Hutchings M.T., and Krawitz A.D. (Eds). Measurement of Residual and Applied Stress Using Neutron Diffraction. NATO ASI Series E Applied Science vol. 216 (1992), Kluwer Academic Publishers, Dordrecht
11. Krawitz A.D., and Holden T.M. MRS Bull. XV (1990) 57-64
12. Lebrun J.L., Gergaud P., Ji V., and Belassel M. J. de Physique IV (1995) 265-268
13. Withers P.J., Preuss M., Webster P.J., Hughes D.J., and Korsunsky A.M. Materials Sci. Forum (ECRSV) 404-407 (2002) 1-10
14. Withers P.J. In: Buschow K.H.J., Cahn R.W., Flemings M.C., Ilschner B., Kramer E.J., and Mahajan S. (Eds). Encyclopedia of Materials: Science & Technology (2001), Elsevier, Oxford 8158-8170
15. Pirling T., Bruno G., and Withers P.J. Mat. Sci. Eng. 437A (2006) 139-144
16. R.P. Schneider, T. Poeste, H. Freydank, M. Hofmann, in: Measurement of Residual Stress in Materials Using Neutrons, 2005, Vienna, Int. Atomic Energy Agency; IAEA-TECDOC-1457, pp. 61-70
17. P. Mikula, M. Vrána, P. Lukáš, in: Measurement of Residual Stress in Materials Using Neutrons, 2005, Vienna, Int. Atomic Energy Agency; IAEA-TECDOC-1457, pp. 19-27
18. Holden T., Krawitz A.D., and Anderson I. Journal of Metals 58 (2006) 64-67
19. A.G. Youtsos, in: Measurement of Residual Stress in Materials Using Neutrons, 2005, Vienna, Int. Atomic Energy Agency; IAEA-TECDOC-1457, pp. 33-50
20. Ceretti M., Coppola R., Lodini A., Perrin M., and Rustichelli F. Physica B 213 (1995) 803-805
21. T. Gyula, in: Measurement of Residual Stress in Materials Using Neutrons, 2005, Vienna, Int. Atomic Energy Agency; IAEA-TECDOC-1457, pp. 71-79
22. T. Gnäupel-Herold, in: Measurement of Residual Stress in Materials Using Neutrons, 2005, Vienna, Int. Atomic Energy Agency; IAEA-TECDOC-1457, pp. 81-90
23. Withers P.J., Johnson M.W., and Wright J.S. Physica B 292 (2000) 273-285
24. Daymond M.R., Bourke M.A.M., Von Dreele R.B., Clausen B., and Lorentzen T. J. Appl. Phys. 82 4 (1997) 1554-1556
25. Edwards L.E., Withers P.J., and Daymond M.R. In: Webster G.A. (Ed). 6th International Conference on Residual Stress (2000), Institute of Materials, Oxford. 1-86125-123-8 1116-1123
26. Stuhr U., Spitzer H., Egger J., Hofer A., Rasmussen P., Graf D., Bollhalder A., Schild M., Bauer G., and Wagner W. Nuclear Instrum. Methods Phys. Res. A 545 (2005) 330-338
27. Bourke M.A.M., Dunand D.C., and Ustundag E. Appl. Phys. A-Mater. Sci. Process. 74 (2002) S1707-S1709
28. Wang X.L. Journal of Metals 58 (2006) 52-57
29. Nye J.F. Physical Properties of Crystals-Their Representation by Tensors and Matrices (1985), Clarendon, Oxford
30. Baczmanski A., Wierzbanowski K., Tarasiuk J., Ceretti M., and Lodini A. Revue de Metallurgie-Cahiers d'informations techniques 94 (1997) 1467-1474
31. G.A. Webster (Ed.), ISO/TTA3 Technology Trends Assessment, Geneva 20, Switzerland, 2001
32. Withers P.J. J. Appl. Cryst. 37 (2004) 596-606
33. Reimers W., Broda M., Brusch B., Dantz D., Liss K.-D., Pyzalla A., Schmackers T., and Tschentscher T. J. Nondest. Eval. 17 (1998) 129-140
34. Withers P.J. In: Fitzpatrick M.E., and Lodini A. (Eds). Analysis of Residual Stress by Diffraction using Neutron and Synchrotron Radiation (2003), Taylor & Francis, London 170-189
35. H.J. Stone, H.K.D.H. Bhadeshia, P.J. Withers, Mat. Sci. Forum (2008), in press. Paper was presented at 4th Meca SENS in Vienna
36. Steuwer A., Santisteban J.R., Turski M., Withers P.J., and Buslaps T. J. Appl. Cryst. 37 (2005) 883-889
37. A. Steuwer, M. Rahman, M.E. Fitzpatrick, L. Edwards, P.J. Withers, The evolution of residual and crack-tip stresses during a fatigue overload, Acta. Mater. (2007), in preparation
38. Ganguly S., Fitzpatrick M.E., and Edwards L. Met. Mat. Trans. A 37 (2006) 411-420
39. Daymond M.R., Johnson M.W., and Sivia D.S. J. Strain Anal. Engrg. Design 37 (2002) 73-85
40. Sarma G.B., and Dawson P.R. Internat. J. Plasticity 12 (1996) 1023-1054
41. Van Houtte P., Kanjarla A.K., Van Bael A., Seefeldt M., and Delannay L. Europ. J. Mech. A-Solids 25 (2006) 634-648
42. Bate P. Phil. Trans. Royal Soc. London Ser. A-Math. Phys. Engrg. Sci. 357 (1999) 1589-1601
43. Taylor G.I. J. Inst. Met. 62 (1938) 307-324
44. Sachs G. Z. VDI 72 (1928) 734-736
45. Lebensohn R.A., and Tomé C.N. Acta Metall. Mater. 41 (1993) 2611-2624
46. Beaudoin A.J., Mathur K.K., Dawson P.R., and Johnson G.C. Int. J. Plasticity 9 (1993) 833
47. Becker R. Acta Metall. Mater. 39 (1991) 1211-1230
48. Barton N., Dawson P., and Miller M. J. Eng. Mat. Tech.-Trans. ASME 121 (1999) 230-239
49. Dawson P., Boyce D., MacEwen S., and Rogge R. Mat. Sci. Eng. A 313 (2001) 123-144
50. Delannay L., Loge R.E., Chastel Y., and Houte P.V. Acta Mater. 50 (2002) 5127-5138
51. Clausen B., Lorentzen T., and Leffers T. Acta Mater. 46 (1998) 3087-3098
52. Turner P.A., and Tome C.N. Acta Metall. 42 (1994) 4143-4153
53. Dawson P., Boyce D., MacEwen S., and Rogge R. Met. Mat. Trans. A 31 (2000) 1543-1555
54. B. Clausen, in: Risø National Laboratory, Risø-R-985(EN), Roskilde, Denmark, 1997
55. Clausen B., Lorentzen T., Bourke M.A.M., and Daymond M.R. Mat. Sci. & Eng. A 259 (1999) 17-24
56. Kaschner G.C., Tome C.N., Beyerlein I.J., Vogel S.C., Brown D.W., and McCabe R.J. Acta Mater. 54 (2006) 2887-2896
57. Yablinsky C.A., Cerreta E.K., Gray G.T., Brown D.W., and Vogel S.C. Met. Mat. Trans. A 37 (2006) 1907-1915
58. Oliver E.C., Daymond M.R., Quinta da Fonseca J., and Withers P.J. J. Neutron Res. 12 (2004) 33-37
59. Agnew S.R., Tome C.N., Brown D.W., Holden T.M., and Vogel S.C. Scripta Mater. 48 (2003) 1003-1008
60. E.C. Oliver, M.R. Daymond, P.J. Withers, in: Materials Science Forum (ICOTOM 14), vol. 490-491, 2005, pp. 257-262
61. D.W. Brown, S.R. Agnew, S.P. Abeln, W.R. Blumenthal, M.A.M. Bourke, M.C. Mataya, C.N. Tome, S.C. Vogel, in: ICOTOM 14: Textures of Materials, Pts 1 and 2, 2005, pp. 1037-1042
62. Newnham R.E. Acta Crystallogr. Sect. A 54 (1998) 729-737
63. Mori T., and Withers P.J. In: Buschow K.H.J., Cahn R.W., Flemings M.C., Ilschner B., Kramer E.J., and Mahajan S. (Eds). Encyclopedia of Materials: Science & Technology (2001), Elsevier, Oxford 8113-8121
64. Steigenberger U., Eckold G., and Hagen M. Physica B-Condens. Matter 213 (1995) 1012-1016
65. N. Glavatska, G. Mogylnyy, S. Danilkin, D. Hohlwein, in: European Powder Diffraction EPDiC 8, 2004, pp. 397-400
66. Sittner P., Lukas P., Neov D., Daymond M.R., Novak V., and Swallowe G.M. Mater. Sci. Eng. A 324 (2002) 225-234
67. Kisi E.H., Kennedy S.J., and Howard C.J. J. Amer. Ceram. Soc. 80 (1997) 621-628
68. Kisi E.H. J. Amer. Ceram. Soc. 81 (1998) 741-745
69. Smith H.G., Berliner R., Jorgensen J.D., and Trivisonno J. Phys. Rev. B 43 (1991) 4524-4526
70. Oliver E.C., Mori T., Daymond M.R., and Withers P.J. Acta Mater. 51 (2003) 6453-6464
71. Withers P.J., Stobbs W.M., and Pedersen O.B. Acta Metall. 37 (1989) 3061-3084
72. Allen A.J., Bourke M., Dawes S., Hutchings M.T., and Withers P.J. Acta Metall. 40 (1992) 2361-2373
73. Withers P.J., Jensen D.J., Lilholt H., and Stobbs W.M. In: Matthews F.L., Buskell N.C.R., Hodgkinson J.M., and Morton J. (Eds). Proc. ICCM VI/ECCM2 (1987), Elsevier, London 255-264
74. Ceretti M., Braham C., Lebrun J.L., Bonnafe J.P., Perrin M., and Lodini A. Experimental Techniques 20 (1996) 14-18
75. Levy-Tubiana R., Baczmanski A., and Lodini A. Mater. Sci. Eng. A 341 (2003) 74-86
76. Majumdar S., Kupperman D.S., and Singh J.P. J. Am. Cer. Soc. 71 (1988) 858-863
77. Weisbrook C.M., and Krawitz A.D. Mat. Sci. Eng. A 209 (1996) 318-328
78. Klassen R.J., Conlon K.T., and Wood J.T. Scripta Mater. 48 (2003) 385-389
79. Shi N., Arsenault R.J., Krawitz A.D., and Smith L.F. Met. Trans. Ser. A 24 (1993) 187-196
80. Lee K.L., Whitehouse A.F., Withers P.J., and Daymond M.R. Mat. Sci. Eng. A 348 (2003) 208-216
81. Sinclair C.W., Saada G., and Embury J.D. Philos. Magazine 86 (2006) 4081-4098
82. Lewis C.A., and Withers P.J. Acta Metall. Mater. 43 (1995) 3685-3699
83. Armstrong W.D., Lorentzen T., Brøndsted P., and Larsen P.H. Acta. Mater. 46 (1998) 3455-3466
84. Dunand D.C., Mari D., Bourke M.A.M., and Roberts J.A. Met. & Mat. Trans. A 27 (1996) 2820-2836
85. Daymond M.R., and Withers P.J. Scripta Metall. Mater. 35 (1996) 717-720
86. M. Karadge, G.M. Regino, B. Grant, A. Hoerling, P.J. Withers, M. Preuss, A.M. Korsunsky, G. Baxter, Mater. Metal. Trans. (2007), submitted for publication
87. Johnson M.W., Edwards L., and Withers P.J. Physica B 234 (1997) 1141-1143
88. Woo W., Feng Z., Wang X.-L., An K., Bailey W.B., David S.A., Hubbard C.R., and Choo H. Mat. Sci. Forum 524-525 (2006) 387-392