Recent advances in friction-stir welding - Process, weldment structure and properties

Progress in Materials Science

Volumn 53, Issue 6, 2008, Pages 980-1023

  Nandan, R ^a   DebRoy, T ^a   Bhadeshia, H K D H ^b  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

^b UNIVERSITY OF CAMBRIDGE   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOYS; ALUMINUM; ALUMINUM ALLOYS; ALUMINUM CLADDING; FRICTION; FRICTION WELDING; HEAT AFFECTED ZONE; LIGHT METALS; MATERIALS PROPERTIES; METALS; STRUCTURE (COMPOSITION); WELDING;

(E ,3E) PROCESS; DEFECT FORMATION; ELSEVIER (CO); FRICTION STIR WELDING; STRUCTURE AND PROPERTIES; TOOL DESIGNS; WELDED MATERIALS; WELDMENT;

STRUCTURAL PROPERTIES;

EID: 47949129444     PISSN: 00796425     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.pmatsci.2008.05.001     Document Type: Review

References (209)

1. Thomas WM, Nicholas ED, Needham JC, Murch MG, Temple-Smith P, Dawes CJ. Friction stir butt welding. International Patent Application No. PCT/GB92/02203; 1991.
2. Dawes C.J., and Thomas W.M. Friction stir process welds aluminum alloys. Welding J 75 3 (1996) 41-45
3. Thomas W.M., and Dolby R.E. Friction stir welding developments. In: David S.A., DebRoy T., Lippold J.C., Smartt H.B., and Vitek J.M. (Eds). Proceedings of the sixth international trends in welding research (2003), ASM International, Materials Park, OH, USA 203-211
4. Cho J.H., Boyce D.E., and Dawson P.R. Modeling strain hardening and texture evolution in friction stir welding of stainless steel. Mater Sci Eng A 398 (2005) 146-163
5. Liu H., Fulii H., Maeda M., and Nogi K. Tensile properties and fracture locations of friction-stir welded joints of 6061-T6 aluminium alloy. J Mater Sci Lett 22 (2003) 1061-1063
6. Lee W.B., Lee C.Y., Chang W.S., Yeon Y.M., and Jung S.B. Microstructural investigation of friction stir welded pure titanium. Mater Lett 59 (2005) 3315-3318
7. Thomas W.M., and Nicholas E.D. Friction stir welding for the transportation industries. Mater Des 18 (1997) 269-273
8. Su J.-Q., Nelson T.W., Mishra R., and Mahoney M. Microstructural investigation of friction stir welded 7050-T651 aluminium. Acta Mater 51 3 (2003) 713-729
9. Frigaard O., Grong Ø., and Midling O.T. A process model for friction stir welding of age hardening aluminium alloys. Metall Mater Trans A 32 (2001) 1189-1200
10. Mahoney M.W., Rhodes C.G., Flintoff J.G., Spurling R.A., and Bingel W.H. Properties of friction-stir-welded 7075 T651 aluminum. Metall Mater Trans A 29 7 (1998) 1955-1964
11. Rhodes C.G., Mahoney M.W., Bingel W.H., Spurling R.A., and Bampton C.C. Effect of friction stir welding on microstructure of 7075 aluminum. Scripta Mater 36 1 (1997) 69-75
12. Liu G., Murr L.E., Niou C.-S., McClure J.C., and Vega F.R. Microstructural aspects of the friction-stir welding of 6061-T6 aluminum. Scripta Mater 37 3 (1997) 355-361
13. Jata K.V., and Semiatin S.L. Continuous dynamic recrystallization during friction stir welding. Scripta Mater 43 (2000) 743-748
14. Masaki K., Sato Y.S., Maeda M., and Kokawa H. Experimental simulation of recrystallized microstructure in friction stir welded Al alloy using a plane-strain compression test. Scripta Mater 58 (2008) 355-360
15. McClure Ju.C., Tang W., Murr L.E., Guo X., Feng Z., and Gould J.E. A thermal model for friction stir welding. In: Vitek J.M., David S.A., Johnson J.A., Smartt H.B., and DebRoy T. (Eds). Trends in welding research (1998), ASM International, Ohio, USA 590-595
16. Mishra R.S., and Ma Z.Y. Friction stir welding and processing. Mater Sci Eng R: Rep 50 1-2 (2005) 1-78
17. Bever M.B., Holt D.L., and Titchener A.L. Stored energy of cold work. Prog Mater Sci 17 (1973) 5-192
18. Zhu Q., Sellars C.M., and Bhadeshia H.K.D.H. Quantitative metallography of deformed grains. Mater Sci Technol 23 7 (2007) 757-766
19. Belous M.V., and Cherepin V.T. Changes in the steel carbide phase under influence of cold plastic deformation. Fiz Met Metalloved 14 (1962) 48-54
20. Danoix F., Julien D., Sauvage X., and Copreaux J. Direct evidence of cementite dissolution in drawn pearlitic steels observed by tomographic atom probe. Mater Sci Eng A 250 (1998) 8-13
21. Umemoto M., Liu Z.G., Hao X.J., Masuyama K., and Tsuchiya K. Formation of nanocrystalline ferrite through rolling and ball milling. Mater Sci Forum 360 and 362 (2001) 167-174
22. Ivanisenko Y., MacLaren I., Valiev R.Z., and Fecht H.J. First observation of a shear-induced bcc to fcc transformation in nanocrystalline ferrite. Adv Eng Mater 7 (2005) 1011-1014
23. Lojkowski W., Ivanisenko Yu., and Fecht H.-J. Strain induced cementite dissolution in pearlitic steels as a classical example of mechanical alloying. Trans Indian Inst Met 58 (2005) 939-1227
24. Gorkunov E.S., Grachev S.V., Smirnov S.V., Somova V.M., Zadvorkin S.M., and Kar'kina L.E. Relation of physical-mechanical properties to the structural condition of severely deformed patented carbon steels at drawing. Russian J Nondestruct Test 41 (2005) 65-79
25. Russell MJ, Shercliff H. Analytical modelling of friction stir welding. In: Russell MJ, Shercliff R, editors. INALCO'98: seventh international conference on joints in aluminium. Cambridge, UK: TWI; 1999. p. 197-207.
26. Feng Z., Gould J.E., and Lienert T.J. A heat flow model for friction stir welding of steel. In: Bieler T.R. (Ed). Hot deformation of aluminium alloys (1998), TMS-AIME, Warrendale, PA, USA 149-158
27. Song M., and Kovacevic R. Thermal modeling of friction stir welding in a moving coordinate system and its validation. Int J Mach Tools Manuf 43 (2003) 605-615
28. Song M., and Kovacevic R. Numerical and experimental study of the heat transfer process in friction stir welding. J Eng Manuf 217 (2003) 73-85
29. Song M., and Kovacevic R. Heat transfer modelling for both workpiece and tool in the friction stir welding process: a coupled model. J Eng Manuf 218 (2004) 17-33
30. Zhang H.W., Zhang Z., and Chen J.T. Effect of angular velocity of pin on material flow during friction stir welding. Acta Metall Sin 41 (2005) 853-859
31. Zhang H.W., Zhang Z., and Chen J.T. Finite element simulation of the friction stir welding process. Mater Sci Eng A 403 (2005) 340-348
32. Chen C.M., and Kovacevic R. Finite element modeling of friction stir welding - thermal and thermomechanical analysis. Int J Mach Tools Manuf 43 (2003) 1319-1326
33. Schmidt H., Hattel J., and Wert J. An analytical model for the heat generation in friction stir welding. Modell Simul Mater Sci Eng 12 (2004) 143-157
34. Schmidt H., and Hattel J. Heat source models in simulation of heat flow in friction stir welding. Int J Offshore Polar Eng 14 (2004) 296-304
35. Schmidt H., and Hattel J. Modelling heat flow around tool probe in friction stir welding. Sci Technol Weld Join 10 (2005) 176-186
36. Schmidt H., and Hattel J. A local model for the thermomechanical conditions in friction stir welding. Modell Simul Mater Sci Eng 13 (2005) 77-93
37. Khandkar M.Z.H., and Khan J.A. Thermal modeling of overlap friction stir welding for Al-alloys. J Mater Process Manuf Sci 10 (2001) 91-105
38. Khandkar M.Z.H., Khan J.A., and Reynolds A.P. Prediction of temperature distribution and thermal history during friction stir welding: input torque based model. Sci Technol Weld Join 8 (2003) 165-174
39. Nandan R., Roy G.G., and DebRoy T. Numerical simulation of three-dimensional heat transfer and plastic flow during friction stir welding. Metall Mater Trans A 37 (2006) 1247-1259
40. Nandan R., Roy G.G., Lienert T.J., and DebRoy T. Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel. Sci Technol Weld Join 11 (2006) 526-537
41. Nandan R., Roy G.G., Lienert T.J., and DebRoy T. Three-dimensional heat and material flow during friction stir welding of mild steel. Acta Mater 55 (2007) 883-895
42. Simar A., Lecomte-Beckers J., Pardoen T., and de Meester B. Effect of boundary conditions and heat source distribution on temperature distribution in friction stir welding. Sci Technol Weld Join 11 (2006) 170-177
43. Colegrove P.A., and Shercliff H.R. 3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile. J Mater Process Technol 169 (2005) 320-327
44. Colegrove P.A., and Shercliff H.R. Development of Trivex friction stir welding tool. Part 1 - Two-dimensional flow modelling and experimental validation. Sci Technol Weld Join 9 (2004) 345-351
45. Bastier A., Maitournam M.H., van Dang K., and Roger F. Steady state thermomechanical modelling of friction stir welding. Sci Technol Weld Join 11 (2006) 278-288
46. Su P., Gerlich A., North T.H., and Bendzsak G.J. Energy utilisation and generation during friction stir spot welding. Sci Technol Weld Join 11 2 (2006) 163-169
47. Colegrove P.A., and Shercliff H.R. Development of Trivex friction stir welding tool. Part 2 - Three-dimensional flow modelling. Sci Technol Weld 9 (2004) 352-361
48. Lienert Jr. T.J., Stellwag W.L., Grimmett B.B., and Warke R.W. Friction stir welding studies on mild steel. Weld J Res Suppl 82 (2003) 1s-9s
49. Xu S., Deng X., Reynolds A.P., and Seidel T.U. Finite element simulation of material flow in friction stir welding. Sci Technol Weld Join 6 (2001) 191-193
50. Deng Z., Lovell M.R., and Tagavi K.A. Influence of material properties and forming velocity on the interfacial slip characteristics of cross wedge rolling. Manuf Sci Eng 123 (2001) 647-653
51. Kong H.S., and Ashby M.F. Friction-heating maps and their applications. MRS Bull 16 (1991) 41-48
52. Khan J.A., Xu L., and Chao Y.J. Prediction of nugget development during resistance spot welding using coupled thermal-electrical-mechanical model. Sci Technol Weld Join 4 (1999) 201-207
53. Nandan R., Prabu B., De A., and DebRoy T. Improving reliability of heat transfer and materials flow calculations during friction stir welding of dissimilar aluminum alloys. Weld J 86 10 (2007) 313s-322s
54. De A., and DebRoy T. Reliable calculations of heat and fluid flow during conduction mode laser welding through optimization of uncertain parameters. Weld J 84 (2005) 101s-112s
55. De A., and DebRoy T. Probing unknown welding parameters from convective heat transfer calculation and multivariable optimization. J Phys D: Appl Phys 37 1 (2006) 140-150
56. Kumar A., Zhang W., and DebRoy T. Improving reliability of modelling heat and fluid flow in complex gas metal arc fillet welds. Part I: An engineering physics model. J Phys D: Appl Phys 38 (2005) 119-126
57. Kumar A., and DebRoy T. Guaranteed fillet weld geometry from heat transfer model and multivariable optimization. Int J Heat Mass Transfer 47 26 (2004) 5793-5806
58. Zienkiewicz O.C., and Cormeau I.C. Visco-plasticity solution by finite-element process. Arch Mech 24 (1972) 872-889
59. Sellars C.M., and McTegart W.J. On the mechanism of hot deformation. Acta Metall 14 (1966) 1136-1138
60. Sheppard T., and Wright D.S. Determination of flow-stress. 1: Constitutive equation for aluminum-alloys at elevated-temperatures. Met Technol 6 (1979) 215-223
61. Wright D.S., and Sheppard T. Determination of flow-stress. 2: Radial and axial temperature distribution during torsion testin. Met Technol 6 (1979) 224-229
62. Zener C., and Hollomon J.H. Effect of strain rate upon plastic flow of steel. J Appl Phys 15 (1944) 22-32
63. Sheppard T., and Jackson A. Constitutive equations for use in prediction of flow stress during extrusion of aluminium alloys. Mater Sci Technol 13 (1997) 203-209
64. Bruschi S., Poggio S., Quadrini F., and Tata M.E. Weldability of Ti-6Al-4V alloy at high temperatures and strain rates. Mater Lett 58 (2004) 3622-3629
65. Ulysse P. Three-dimensional modeling of the friction stir-welding process. J Mach Tools Manuf 42 (2002) 1549-1557
66. Dong P., Lu F., Hong J.K., and Cao Z. Coupled thermomechanical analysis of friction stir welding process using simplified models. Sci Technol Weld Join 6 (2001) 281-287
67. Heurtier P., Jones M.J., Desrayaud C., Driver J.H., Montheillet F., and Allehaux D. Mechanical and thermal modelling of friction stir welding. J Mater Process Technol 171 (2006) 348-357
68. Buffa G., Hua J., Shivpuri R., and Fratini L. Design of the friction stir welding tool using the continuum based FEM model. Mater Sci Eng A 419 (2006) 381-388
69. Askari A., Silling S., London B., and Mahoney M. Modelling, analysis and validation of friction stir welding and processing. J Met 56 (2004) 245-246
70. Bell RL. An isotropic material remap scheme for Eulerian codes. In: Second International Conference on Cybernetics and Information Technologies, Systems and Applications (CITSA), 2005.
71. Boyce D.E., Dawson P.R., Sidle B., and Gnäupel-Herold T. A multiscale methodology for deformation modeling applied to friction stir welded steel. Comput Mater Sci 38 (2006) 158-175
72. Nandan R., Lienert T.J., and DebRoy T. Toward reliable calculations of heat and plastic flow during friction stir welding of Ti-6Al-4V alloy. Int J Mater Res 99 (2008) 434-444
73. Bhadeshia H.K.D.H. Mathematical models in materials science. Mater Sci Technol 24 (2008) 128-135
74. Seidel T.U., and Reynolds A.P. Two-dimensional friction stir welding process model based on fluid mechanics. Sci Technol Weld Join 8 (2003) 175-183
75. Schmidt H., Dickerson T.L., and Hattel J. Material flow in butt friction stir welds in AA2024-T3. Acta Mater 54 (2006) 1199-1209
76. Guerra M., Schmidt C., McClure J.C., Murr L.E., and Nunes A.C. Flow patterns during friction stir welding. Mater Charact 49 (2002) 95-101
77. Seidel T.U., and Reynolds A.P. Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique. Metall Mater Trans A 32 (2001) 2879-2884
78. Ayer R., Jin H.W., Mueller R.R., Ling S., and Ford S. Interface structure in a Fe-Ni friction stir welded joint. Scripta Mater 53 (2005) 1383-1387
79. Fratini L., Buffa G., Palmeri D., Hua J., and Shivpuri R. Material flow in FSW of AA7075-T6 butt joints: numerical simulations and experimental verifications. Sci Technol Weld Join 11 (2006) 412-421
80. Reynolds A.P. Visualisation of material flow in autogenous friction stir welds. Sci Technol Weld Join 5 2 (2000) 120-124
81. Schneider J.A., and Nunes A.C. Characterization of plastic flow and resulting microtextures in a friction stir weld. Metall Mater Trans B 35 (2004) 777-783
82. Colligan K. Material flow behavior during friction stir welding of aluminum. Weld J Res Suppl 78 (1999) 229s-237s
83. Sato Y.S., Kokawa H., Ikeda K., Enomoto M., Jogan S., and Hashimoto T. Microtexture in the friction-stir weld of an aluminum alloy. Metall Mater Trans A 32 (2001) 941-948
84. Fonda R.W., Knipling K.E., and Bingert J.F. Microstructural evolution ahead of the tool in aluminium friction stir welds. Scripta Mater 58 (2008) 343-348
85. Baillas G., and Donne C.D. Characterisazion of friction stir welded joints of the aluminium alloy AA 2024-T3 by laser extensometry. Materialprufung 42 (2000) 236-239
86. Krishnan K.N. On the formation of onion rings in friction stir welds. Mater Sci Eng A 327 (2002) 246-251
87. Norman AF, Brough T, Pragnell PB. High resolution EBSD analysis of the grain structure in an AA2024 friction stir weld. In: Aluminium alloys 2000: their physical and mechanical properties, parts 1-3, vols. 331-333; 2000.
88. Yang B.C., Yan J.H., Sutton M.A., and Reynolds A.P. Banded microstructure in AA2024-T351 and AA2524-T351 aluminum friction stir welds. Part I: Metallurgical studies. Mater Sci Eng A 364 1-2 (2004) 55-65
89. Booth D, Sinclair I. In: Aluminium alloys 2002: their physical and mechanical properties, parts 1-3, vols. 396-402; 2002. p. 1671-6.
90. Sutton M.A., Yang B., Reynolds A.P., and Taylor R. Microstructural studies of friction stir welds in 2024-T3 aluminum. Mater Sci Eng A 323 1-2 (2002) 160-166
91. lee W.B., Yeon Y.M., and Jung S.B. The joint properties of dissimilar formed Al alloys by friction stir welding according to the fixed location of materials. Scripta Mater 49 (2003) 423-428
92. Li Y., Murr L.E., and McClure J.C. Flow visualization and residual microstructures associated with the friction-stir welding of 2024 aluminum to 6061 aluminum. Mater Sci Eng A 271 1-2 (1999) 213-223
93. Li Y., Murr L.E., and McClure J.C. Flow visualization and residual microstructures associated with the friction-stir welding of 2024 aluminum to 6061 aluminum. Mater Sci Eng A 271 1-2 (1999) 213-223
94. Murr L.E., Li Y., Flores R.D., Trillo E.A., and McClure J.C. Intercalation vortices and related microstructural features in the friction-stir welding of dissimilar metals. Mater Res Innov 2 3 (1998) 150-163
95. Liu YL, Liu Y, Morris JG. Comparison of the evolution of microstructure and texture in DC cast and strip cast aluminum alloy AA5182 hot bands. In: Proceedings of the TMS fall meeting; 1998. p. 61-71.
96. Attallah M.M., Davis C.L., and Strangwood M. Influence of base metal microstructure on microstructural development in aluminium based alloy friction stir welds. Sci Technol Weld Join 12 (2007) 361-369
97. Hofmann D.C., and Vecchio K.S. Thermal history analysis of friction stir processed and submerged friction stir processed aluminum. Mater Sci Eng A 465 1-2 (2007) 165-175
98. Woo W., Feng Z., Wang X.-L., Brown D.W., Clausen B., An K., et al. In situ neutron diffraction measurements of temperature and stresses during friction stir welding of 6061-T6 aluminium alloy. Sci. Technol. Weld. Join 12 4 (2007) 298-303
99. Colegrove P.A., and Shercliff H.R. Two-dimensional CFD modelling of flow round profiled FSW tooling. Sci Technol Weld Join 9 (2004) 483-492
100. Sato Y.S., Kokawa H., Enomoto M., and Jogan S. Microstructural evolution of 6063 aluminum during friction-stir welding. Metall Mater Trans A 30 9 (1999) 2429-2437
101. Sato Y., Park S.H.C., and Kokawa H. Microstructural factors governing hardness in friction-stir welds of solid-solution-hardened Al alloys. Metall Mater Trans A 32 12 (2001) 3033-3042
102. Roy G.G., Nandan R., and DebRoy T. Dimensionless correlation to estimate peak temperature during friction stir welding. Sci Technol Weld Join 11 (2006) 606-608
103. Sunden B. Viscous heating in forced convective heat-transfer across a circular cylinder at low Reynolds number. Int J Numer Method Eng 35 4 (1992) 729-736
104. Schmidt H.B., and Hattel J.H. Thermal modelling of friction stir welding. Scripta Mater 58 (2008) 332-337
105. Hassan K.A.A., Pragnell P.B., Norman A.F., Price D.A., and Williams S.W. Effect of welding parameters on nugget zone microstructure and properties in high-strength aluminium alloy friction stir welds. Sci Technol Weld Join 8 (2003) 257-268
106. Su P., Gerlich A., Yamamoto M., and North T.H. Formation and retention of local melting films in AZ91 friction stir spot welds. J Mater Sci 42 (2007) 9954-9965
107. Su J.-Q., Nelson T.W., and Sterling C.J. A new route to bulk nanocrystalline materials. J Mater Res 18 8 (2003) 1757-1760
108. Fujii H., Cui L., Tsuji N., Nataka K., Nogi K., Ikeda R., et al. Transformation in stir zone of friction stir welded carbon steels with different carbon contents. ISIJ Int 47 (2007) 299-306
109. Cui L., Fujii H., Tsuji N., and Nogi K. Friction stir welding of a high carbon steel. Scripta Mater 56 7 (2007) 637-640
110. Sato Y., Urata M., and Kokawa H. Parameters controlling microstructure and hardness during friction-stir welding of precipitation-hardenable aluminum alloy 6063. Metall Mater Trans A 33 3 (2002) 625-635
111. Peel M.J., Steuwer A., Withers P.J., Dickerson T., Shi Q., and Shercliff H. Dissimilar friction stir welds in AA5083-AA6082. Part I: Process parameter effects on thermal history and weld properties. Metall Mater Trans A 37 7 (2006) 2183-2193
112. Thomas W.M., Johnson K.I., and Wiesner C.S. Friction stir welding-recent developments in tool and process technologies. Adv Eng Mater 5 (2003) 485-490
113. Thomas W.M. Friction stir welding - recent developments. Mater Sci Forum 426-432 (2003) 229-236
114. Thomas W.M., Staines D.G., Johnsonand K.I., and Evans P. Com-stir - compound motion for friction stir welding and machining. Adv Eng Mater 5 (2003) 273-274
115. Zhao Y.H., Lin S.B., Qu F., and Wu L. Influence of pin geometry on material flow in friction stir welding process. Mater Sci Technol 22 (2006) 45-50
116. Mandal A., and Roy P. Modeling the compressive strength of molasses-cement sand system using design of experiments and back propagation neural networks. J Mater Process Technol 180 (2006) 167-173
117. Crawford R., Cook G.E., Strauss A.M., Hartman D.A., and Stremler M.A. Experimental defect analysis and force prediction simulation of high weld pitch friction stir welding. Sci Technol Weld Join 11 (2006) 657-665
118. Liu H.J., Fujii H., Maeda M., and Nogi K. Tensile fracture location characterisation of friction stir welded joints of differen aluminium alloys. J Mater Sci Technol 20 (2004) 103-105
119. Long X., and Khanna S.K. Modelling of electrically enhanced friction stir welding process using finite element method. Sci Technol Weld Join 10 (2005) 482-487
120. Kimand Y.G., Fujii H., Tsumura T., Komazaki T., and Nakata K. Three defect types in friction stir welding of aluminium die casting alloys. Mater Sci Eng A 415 (2006) 250-254
121. Leal R., and Loureiro A. Defect formation in friction stir welding of aluminium alloys. Adv Mater Forum II 455-456 (2004) 299-302
122. Fujii H., Ueji R., Takada Y., Kitahara H., Tsuji N., Nakata K., et al. Friction stir welding of ultrafine grained interstitial free steels. Mater Trans JIM 47 (2006) 239-242
123. Reynolds A.P., Tang W., Posada M., and Deloach J. Friction stir welding of DH36 steel. Sci Technol Weld Join 8 (2003) 455-460
124. Colegrove P.A., and Shercliff H.R. CFD modelling of friction stir welding of thick plate 7449 aluminium alloy. Sci Technol Weld Join 11 (2006) 429-441
125. Elangovan K., and Balasubramanian V. Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminium alloy. Mater Sci Eng A 459 (2007) 7-18
126. Kimapong K., and Watanabe T. Effect of welding process parameters on mechanicl properties of FSW lap joint between aluminium alloy and steel. Mater Trans 46 (2005) 2211-2217
127. Withers P.J., and Bhadeshia H.K.D.H. Residual stress. Part 1: Measurement techniques. Mater Sci Technol 17 (2001) 355-365
128. Withers P.J., and Bhadeshia H.K.D.H. Residual stress. Part 2: Nature and origins. Mater Sci Technol 17 (2001) 366-375
129. Francis JA, Stone HJ, Kundu S, Rogge RB, Bhadeshia HKDH, Withers PJ, et al. Transformation temperatures and welding residual stresses in ferritic steels. In: Proceedings of PVP2007, ASME pressure vessels and piping division conference. San Antonio, Texas: American Society of Mechanical Engineers (ASME); 2007. p. 1-8.
130. Ohta A., Suzuki N., Maeda Y., Hiraoka K., and Nakamura T. Superior fatigue crack growth properties in newly developed weld metal. Int J Fatigue 21 (1999) S113-S118
131. Stefanescu D., Truman C.E., Smith D.J., and Whitehead P.S. Improvements in residual stress measurement by the incremental centre hole drilling technique. Exp Mech 46 (2006) 417-427
132. Ya M., Dai F.L., and Lu J. Study of nonuniform in-plane and in-depth residual stress of friction stir welding. J Press Vess Technol: Trans ASME 125 (2003) 201-208
133. James M.N., Hattingh D.G., Huges D.J., Wei L.W., Patterson E.A., and Da Fonseca J.Q. Synchrotron diffraction investigation of the distribution and influence of residual stresses in fatigue. Fatigue Fract Eng Mater Struct 27 (2004) 609-622
134. Peel M., Steuwer A., Preuss M., and Withers P.J. Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds. Acta Mater 51 16 (2003) 4791-4801
135. Chen C.M., and Kovacevic R. Parametric finite element analysis of stress evolution during friction stir welding. J Eng Manuf 220 (2006) 1359-1371
136. Khandkar M.Z.H., Khan J.A., Reynolds A.P., and Sutton M.A. Predicting residual thermal stresses in friction stir welded metals. J Mater Process Technol 174 (2006) 195-203
137. Soundararajan V., Zekovic S., and Kovacevic R. Thermo-mechanical model with adaptive boundary conditions for friction stir welding of Al 6061. Int J Mach Tools Manuf 45 (2005) 1577-1587
138. Reynolds A.P., Tang W., Gnaupel-Herold T., and Prask H. Structure, properties, and residual stress of 304L stainless steel friction stir welds. Scripta Mater 48 9 (2003) 1289-1294
139. Staron P., Kocak M., and Williams S. Residual stresses in friction stir welded al sheets. Appl Phys A: Mater Sci Process 74 (2002) S1161-S1162
140. Richards D.G., Pragnell P.B., Withers P.J., Williams S.W., Wescott A., and Oliver E.C. Geometry effects when controlling residual stresses in friction stir welds by mechanical tensioning. Resid Stress VII 524-525 (2006) 71-76
141. Sutton M.A. Limited weld residual stress measurements in fatigue crack propagation. Part II: FEM-based fatigue crack propagation with complete residual stress fields. Fatigue Fract Eng Mater Struct 29 (2006) 537-545
142. John R., Jata K.V., and Sadananda K. Residual stress effects on near-threshold fatigue crack growth in friction stir welds in aerospace alloys. Int J Fatigue 25 (2003) 939-948
143. Jata K.V., Sankaran K.K., and Ruschau J.J. Friction-stir welding effects on microstructure and fatigue of aluminum alloy 7050-T7451. Metall Mater Trans A 31 9 (2000) 2181-2192
144. Bussu G., and Irving P.E. The role of residual stress and heat affected zone properties on fatigue crack propagation in friction stir welded 2024-T351 aluminium joints. Int J Fatigue 25 1 (2003) 77-88
145. Pao P.S., Gill S.J., Feng C.R., and Sankaran K.K. Corrosion-fatigue crack growth in friction stir welded Al 7050. Scripta Mater 45 5 (2001) 605-612
146. Grong Ø. Metallurgical modelling of welding. 2nd ed. (1997), Maney, London
147. Svensson L.E., Karlsson L., Larsson H., Karlsson B., Fazzini M., and Karlsson J. Microstructure and mechanical properties of friction stir welded aluminium alloys with special reference to AA 5083 and AA 6082. Sci Technol Weld Join 5 5 (2000) 285-296
148. Nair S.B., Pahanikumar G., Rao P., and Sinah P.P. Improvement of mechanical properties of gas tungsten arc and electron beam welded AA2219 alloy. Sci Technol Weld Join 12 (2007) 579-585
149. Gupta R.K., Biju S., Ghosh B.R., and Sinha P.P. Microstructural evolution and properties of friction stir welded aluminium alloy AA2219. Aust Weld J 52 (2007) 35-39
150. Paglia C.S., and Buchheit R.G. Microstructure, microchemistry and environmental cracking susceptibility of friction stir welded AA2219-T87. Mater Sci Eng A 429 (2006) 107-114
151. Starink M.J., Seschamps A., and Wang S.C. The strength of friction stir welded and friction stir processed aluminium alloys. Scripta Mater 58 (2008) 377-382
152. Okuyucu H., Kurt A., and Arcaklloglu E. Artificial neural network application to the friction stir welding of aluminum plates. Mater Des 28 (2007) 78-84
153. Kamp N., Sullivan A., Thomasl R., and Robson J.D. Modelling of heterogeneous precipitate distribution evolution during friction stir welding process. Acta Mater 54 (2006) 2003-2014
154. Zhao Y.H., Lin S.B., He Z.Q., and Wu L. Microhardness prediction in frictrion stir weling of 2014 aluminium alloy. Sci Technol Weld Join 11 (2006) 178-182
155. Chang C.I., Lee C.J., and Huang J.C. Relationship between grain size and Zener-Holloman parameter during friction stir processing in AZ31 Mg alloys. Scripta Mater 51 (2004) 509-514
156. Liu H.J., Fujii H., and Nogi K. Microstructure and mechanical properties of friction stir welded joints of AC4A cast aluminium alloy. Mater Sci Technol 20 (2004) 399-402
157. Ma Z.Y., Pilchak A.L., Juhas M.C., and Williams J.C. Microstructural refinement and property enhancement of cast light alloys via friction stir processing. Scripta Mater 58 (2008) 361-366
158. Warrington H.G. Developments in magnesium alloys. Prog Met Phys 2 (1958) 121-148
159. Froes F.H. Advanced metals for aerospace and automotive use. Mater Sci Eng A 184 (1994) 119-133
160. Forrest M., and Burstow C. Magnesium - is the die cast?. Mater World (2004) 10-11
161. King J.F. Magnesium: commodity or exotic?. Mater Sci Technol 23 (2007) 1-14
162. Herold H. Recent advances in arc welding of magnesium alloys. Aust Weld J 48 (2003) 18-21
163. Park S.H.C., Sato Y.S., and Kokawa H. Effect of micro-texture on fracture location in friction stir weld of Mg alloy AZ61 during tensile test. Scripta Mater 49 2 (2003) 161-166
164. Esparza J.A., Davis W.C., Trillo E.A., and Murr L.E. Firction-stir welding of magnesium alloy AZ31B. J Mater Sci Lett 21 (2002) 917-920
165. Fairman M., Afrin N., Chen D.L., Cao X., and Jahazi M. Microstructural evaluation of friction stir processed AZ31B-H24 magnesium alloy. Can Metall Quart 46 (2007) 425-432
166. Lee W.B., Kim J.W., Yeon Y.M., and Jung S.B. The joint characteristics of friction stir welded AZ91D magnesium alloy. Mater Trans 44 5 (2003) 917-923
167. Afrin N., Chen D.L., and Jahazi M. Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy. Mater Sci Eng A 472 (2008) 179-186
168. Mironov S., Motohashi Y., Ito T., Goloborodko A., Funami K., and Kaibyshev R. Feasibility of friction stir welding for joining and microstructure refinement in a ZK60 magnesium alloy. Mater Trans JIM 48 (2007) 3140-3148
169. Xie G.M., Ma Z.Y., Geng L., and Chen R.S. Microstructural evolution and mechanical properties of friction stir welded Mg-Zn-Y-Zr alloy. Mater Sci Eng A 471 (2007) 63-68
170. Cederqvist L. A weld that lasts for 100,000 years: friction stir welding of copper canisters. In: Materials Research Society Symposium Proceedings, vol. 807. Scientific Basis for Nuclear Waste Management XXVII; 2004. p. 477-82.
171. Lee W.B., and Jung S.B. The joint properties of copper by friction stir welding. Mater Lett 58 (2004) 1041-1046
172. Sakthivel T., and Mukhopadhyay J. Microstructure and mechanical properties of friction stir welded copper. J Mater Sci 42 (2007) 8126-8129
173. Flores O.V., Kennedy C., Murr L.E., Brown D., Pappu S., Nowak B.M., et al. Microstructural issues in a friction-stir-welded aluminum alloy. Scripta Mater 38 5 (1998) 703-708
174. Ramirez A.J., and Juhas M.C. Microstructural evolution in Ti-6Al-4V friction stir welds. Mater Sci Forum 426-432 (2003) 2999-3004
175. Reynolds A.P., Hood E., and Tang W. Texture in friction stir welds of timetal 21s. Scripta Mater 52 (2005) 491-494
176. Thomas W.M., Threadgill P.L., and Nicholas E.D. Feasibility of friction stir welding steel. Sci Technol Weld Join 4 (1999) 365-372
177. Threadgill PL, Johnson R. Progress in friction stir welding of steels. Technical report 815/2004. Great Abington, Cambridge, UK: TWI (The Welding Institute); 2004.
178. Sanders DG, Ramulu M, Klock-McCook EJ, Edwards PD, Reynolds AP, Trapp T. Characterization of superplastically formed friction stir weld in titanium 6Al-4V: preliminary results. J Mater Eng Perform 17:187-92.
179. Maynier Ph., Jungmann B., and Dollet J. Creusot-Loire system for the prediction of the mechanical properties of low alloy steel products. In: Doane D.V., and Kirkaldy J.S. (Eds). Hardenability concepts with applications to steels (1978), TMS-AIME, Materials Park, OH, USA 518-545
180. Fujii H., Cui L., Tsuji N., Maeda M., Nakata K., and Nogi K. Friction stir welding of carbon steels. Mater Sci Eng A 429 (2006) 50-57
181. Konkol P.J., Mathers J.A., Johnson R., and Pickens J.R. Friction stir welding of HSLA-65 steel for shipbuilding. J Ship Prod 19 (2003) 159-164
182. Ueji R., Fujii H., Cui L., Nishioka A., Kunishige K., and Nogi K. Friction stir welding of ultrafine grained plain low-carbon steel formed by the martensite process. Mater Sci Eng A 423 (2006) 324-330
183. Ozekcin A., Jin H.W., Koo J.Y., Bangaru N.V., Ayer R., Vaughn G., et al. A microstructural study of friction stir welded joints of carbon steels. Int J Offshore Polar Eng 14 (2004) 284-288
184. Speich G.R., Cuddy L.J., Gordon C.R., and DeArdo A.J. Formation of ferrite from control-rolled austenite. In: Marder A.R., and Goldstein J.I. (Eds). Phase transformations in ferrous alloys (1984), TMS-AIME, Warrendale, PA, USA 341-389
185. Underwood E.E. Quantitative stereology (1970), Addison-Wesley Publication Company
186. Czinege I, Reti T. Determination of local deformation in cold formed products by a measurement of the geometric characteristics of the crystallites. In: Proceedings of the 18th international machine tool design and research conference, forming, vol. 1; 1977. p. 159-63.
187. van Leeuwen Y., Vooijs S., Sietsma J., and Van der Zwaag S. Effect of geometrical assumptions in modelling solid state kinetics. Metall Mater Trans A 29 (1998) 2925-2931
188. Singh S.B., and Bhadeshia H.K.D.H. Topology of grain deformation. Mater Sci Technol 15 (1998) 832-834
189. Matsuura K., and Itoh Y. Estimation of three-dimensional grain size distribution in polycrystalline material. Mater Trans JIM 32 (1991) 1042-1047
190. Takayama Y., Furushiro N., Tozawa T., Kato H., and Hori S. A significant method for estimation of the grain size of polycrystalline materials. Mater Trans JIM 32 (1991) 214-221
191. Bate P., and Hutchinson W.B. Grain boundary area and deformation. Scripta Mater 52 (2005) 199-203
192. Yang J.R., and Chang L.C. Effect of stress on the Widmanstätten ferrite transformation. Mater Sci Eng A 223 (1997) 158-167
193. Babu S.S., and Bhadeshia H.K.D.H. Stress and the acicular ferrite transformations. Mater Sci Eng A 156 (1992) 1-9
194. Shipway P.H., and Bhadeshia H.K.D.H. Mechanical stabilisation of bainite. Mater Sci Eng A 11 (1995) 1116-1128
195. s temperature in Fe-Ni-Cr-C alloys. Metall Trans A 8 (1977) 1471-1484
196. Chatterjee S., Wang H.S., Yang J.R., and Bhadeshia H.K.D.H. Mechanical stabilisation of austenite. Mater Sci Technol 22 (2006) 641-644
197. Kurishita H., Kayano H., Narui M., Yamazaki M., Kano Y., and Shibahara I. Effects of V-notch dimensions on charpy impact test-results for differently sized miniature specimens of ferritic steel. Mater Trans JIM 34 (1993) 1042-1052
198. Bhadeshia H.K.D.H., Strang A., and Gooch D.J. Ferritic power plant steels: remanent life assessment and the approach to equilibrium. Int Mater Rev 43 (1998) 45-69
199. Shekhter A., Pereloma E.V., and Ringer S.P. Effect of temper embrittlement and specimen size on Charpy impact testing of a Cr-Mo-V rotor steel. Mater Sci Technol 17 (2001) 141-147
200. Konkol P.J., and Murczek M.F. Comparison of friction stir weldments and submerged arc weldments in HSLA-65 steel. Weld J Res Suppl 86 (2007) 187s-195s
201. Posada M, DeLoach JJ, Reynolds AP, Fonda RW, Halpin JP. Evaluation of friction stir welded HSLA-65. In: Proceedings of the fourth international friction stir welding symposium. Abington, UK: TWI; 2003 [compact disc].
202. Paglia C.S., and Buchhelt R.G. A look in the corrosion of aluminium alloy friction stir welds. Scripta Mater 58 (2008) 383-387
203. Pao P.S., Gill S.J., and Feng C.R. On fatigue crack initiation from corrosion pits in 7075-T7351 aluminum alloy. Scripta Mater 43 5 (2000) 391-396
204. Konkol PJ. Characterisation of friction stir weldments in 500 brinell hardness quenched and tempered steel. In: Proceedings of the fourth international friction stir welding symposium. Abington, UK: TWI; 2003 [compact disc].
205. Sterling C.J., Nelson T.W., Sorensen C.D., Steel R.J., and Packer S.M. Friction stir welding of quenched and tempered C-Mn steel. In: Jata K.V., Mahoney M.W., Mishra R.S., Semiatin S.L., and Lienert T. (Eds). Friction stir welding and processing II (2003), TMS-AIME, Materials Park, OH, USA 165-171
206. Fujii H., Takada Y., Tsuji N., and Nogi K. Friction stir welding of ultrafine grained materials. Proceedings of the fifth international symposium on friction stir welding (2004), TWI, Cambridge, UK 1-7
207. Fujii H., Cui L., Tsuji N., Ueji R., Nakata K., and Nogi K. Mechanical properties of friction stir welds of ultrafine grained steel and other materials. International offshore and polar engineering conference (2005), International Society of Offshore and Polar Engineers, Seoul 22-26
208. Mishra S., and DebRoy T. A heat transfer and fluid flow based model to obtain a specific weld geometry using various combinations of welding variables. J Appl Phys 98 4 (2005) [article number 044902]
209. Rai R., and DebRoy T. Tailoring weld geometry during keyhole mode laser welding using a genetic algorithm and a heat transfer model. J Phys D: Appl Phys 39 (2006) 1257-1266