Gas-phase synthesis of nanostructured particulate films

KONA Powder and Particle Journal

Volumn 24, Issue March, 2006, Pages 54-69

  Wegner, Karsten ^a   Barborini, Emanuele ^b   Piseri, Paolo ^c   Milani, Paolo ^c  

^a ETH ZURICH   (Switzerland)

^b Via Franco Russoli 3   (Switzerland)

^c UNIVERSITY OF MILAN   (Italy)

Author keywords

Aerosol synthesis; Cluster beam deposition; Nanoparticles; Nanostructured coatings; Thin tilms

Indexed keywords

BIOCOMPATIBILITY; DEPOSITION; FUEL CELLS; GASES; ION BEAMS; NANOPARTICLES; NANOSTRUCTURED MATERIALS; NANOWIRES; PARTICLE SIZE; SYNTHESIS (CHEMICAL);

AEROSOL SYNTHESIS; CATALYTIC MICROREACTORS; CLUSTER BEAM DEPOSITION; NANO-PARTICLE PRODUCTION; NANOSTRUCTURED COATINGS; NANOSTRUCTURED PARTICULATE; PHYSICAL AND CHEMICAL PROPERTIES; THIN TILMS;

NANOSTRUCTURES;

EID: 63749085430     PISSN: 02884534     EISSN: 21875537     Source Type: Journal    
DOI: 10.14356/kona.2006009     Document Type: Article

References (62)

1. Kodas, T.T. and Hampden-Smith, M.: Aerosol Processing of Materials, Wiley-VCH, New York, 1999.
2. 2 aerosols in optical fiber manufacturing torches, J. Aerosol Sci., 22, 1991, 667-675.
3. MacChesney, J.B. and O'Connor, P.B. and Presby, H.M.: A new technique for the preparation of low-loss and graded index optical fibers, Proc. IEEE, 62, 1974, 1280-1281.
4. Kasik, I. and Matejec, V.: New ways for influencing thermophoretic efficiency in the MCVD process, J. Aerosol Sci., 26, 1995, 399-406.
5. Kodas, T.T., Engler, E.M. and Lee, V.Y.: Generation of thick Ba2YCu3O7 films by aerosol deposition, Appl. Phys. Lett., 54, 1989, 1923-1925.
6. Ostraat, M.L., De Blauwe, J.W., Green, M.L., Bell, L.D., Atwater, H.A. and Flagan, R.C.: Ultraclean twostage aerosol reactor for production of oxide-passivated silicon nanoparticles for novel memory devices, J. Electrochem. Soc., 148, 2001, G265-G270.
7. Skandan, G., Glumac, N., Chen, Y.-J., Cosandey, F., Heims, E. and Kear, B.H.: Low-pressure flame deposition of nanostructured oxide films, J. Am. Ceramic Soc., 81, 1998, 2753-2756.
8. Thybo, S., Jensen, S., Johansen, J., Johannessen, T., Hansen, O. and Quaade, U.J.: Flame spray deposition of porous catalysts on surfaces and in microsystems, J. Catal., 223, 2004, 271-277.
9. 2 nanoparticles, Sensors Actuators B, 114, 2006, 283-295.
10. Kashu, S., Fuchita, E., Manabe, T. and Hayashi, C.: Deposition of ultra fine particles using a gas jet, Jap. J. Appl. Phys., 23, 1984, L910-L912.
11. Adachi, M., Okuyama, K., Kousaka, Y. and Tanaka, H.: Preparation of gas sensitive film by deposition of ultrafine tin oxide particles, J. Aerosol Sci., 19, 1988, 253-263.
12. Adachi, M., Okuyama, K., Moon, S., Tohge, N. and Kousaka, Y.: Preparation of ultrafine zirconium dioxide particles by thermal decomposition of zirconium alkoxide vapor, J. Mater. Sci., 24, 1989, 2275-2280.
13. Hwang, J. and Daily, J.W.: Electric field enhanced deposition in flame synthesized materials manufacturing, J. Aerosol Sci., 26, 1995, 5-18.
14. Wiedensohler, A., Maximov, I., Samuelson, L. and Hansson, H.-C.: Formation of nanometer-sized columns in InP using ultrafine aerosol and dry-etching techniques, J. Aerosol Sci., 24, 1993, 555-558.
15. Kruis, F.E., Nielsch, K., Fissan, H., Rellinghaus, B. and Wassermann, E.F.: Preparation of size-classified PbS nanoparticles in the gas phase, Appl. Phys. Lett., 73, 1998, 547-549.
16. Kennedy, M.K., Kruis, F.E., Fissan, H., Mehta, B.R., Stappert, S. and Dumpich, G.: Tailored nanoparticle films from monosized tin oxide nanocrystals: Particle synthesis, film formation, and size-dependent gassensing properties, J. Appl. Phys., 93, 2003, 551-560.
17. Kennedy, M.K., Kruis, F.E., Fissan, H., Nienhaus, H., Lorke, A. and Metzger, T.H.: Effect of in-flight annealing and deposition method on gas-sensitive SnOx films made from size-selected nanoparticles, Sensors Actuators B, 108, 2005, 62-69.
18. Krinke, T.J., Fissan, H. and Deppert, K., Magnusson, M.H., Samuelson, L.: Positioning of nanometer-sized particles on flat surfaces by direct deposition from the gas phase, Appl. Phys. Lett., 78, 2001, 3708-3710.
19. Krinke, T.J., Deppert, K., Magnusson, M.H. and Fissan, H.: Nanostructured deposition of nanoparticles from the gas phase, Part. Part. Syst. Char., 19, 2002, 321-326.
20. Milani, P. and Iannotta, S.: Cluster Beam Synthesis of Nanostructured Materials, Springer, Berlin, 1999.
21. Bansmann, J., Baker, S.H., Binns, C., Blackman, J.A., Bucher, J.-P., Dorantes-Davila, J., Dupuis, V., Favre, L., Kechrakos, D., Kleibert, A., Meiwes-Broer, K.-H., Pastor, G.M., Perez, A., Toulemonde, O., Trohidou, K.N., Tuaillon, J. and Xie, Y.: Magnetic and structural properties of isolated and assembled clusters, Surf. Sci. Rep., 56, 2005, 189-275.
22. Mazza, T., Barborini, E., Kholmanov, I.N., Piseri, P., Bongiorno, G., Vinati, S., Milani, P., Ducati, C., Cattaneo, D., Li Bassi, A., Bottani, C.E., Taurino, A.M. and Siciliano, P.: Libraries of cluster-assembled titania films for chemical sensing, Appl. Phys. Lett., 87, 2005, 103108.
23. Barborini, E., Piseri, P. and Milani, P.: A pulsed microplasma source of high intensity supersonic carbon cluster beams, J. Phys. D: Appl Phys., 32, 1999, L105-L109.
24. Vahedi Tafreshi, H., Piseri, P. and Benedek, G. and Milani, P.: The role of gas dynamics in operation conditions of a pulsed microplasma cluster source for nanostructured thin films deposition, J. Nanosci. Nanotechnol., 6, 2006, 1140-1149.
25. Piseri, P., Podesta, A., Barborini, E. and Milani, P.: Production and characterization of highly intense and collimated cluster beams by inertial focusing in supersonic expansions, Rev. Sci. Instrum, 72, 2001, 2261-2267.
26. Bruzzi, M., Miglio, S., Scaringella, M., Bongiorno, G., Piseri, P., Podesta, A. and Milani, P.: First study of humidity sensors based on nanostructured carbon films produced by supersonic cluster beam deposition, Sensors Actuators B, 100, 2004, 173-176.
27. Diederich, L., Barborini, E., Piseri, P., Podesta, A., Milani, P., Schneuwly, A. and Gallay, R.: Supercapacitors based on nanostructured carbon electrodes grown by cluster-beam deposition, Appl. Phys. Lett., 75, 1999, 2662-2664.
28. 2 with primary and cancer cells, Biomaterials, 27, 2006, 3221-3229.
29. Piseri, P., Vahedi Tafreshi, H. and Milani, P.: Manipulation of nanoparticles in supersonic beams for the production of nanostructured materials, Curr. Opinion Solid State Mater. Sci., 8, 2004, 195-202.
30. Pui, D.Y.H. and Liu, B.Y.H.: Advances in instrumentation for atmospheric aerosol measurement, Pysica Scripta, 37, 1988, 252-269.
31. Flagan, R.C.: History of electrical aerosol measurements, Aerosol Sci. Technol., 28, 1998, 301-380.
32. Chen, D.-R., Pui, D.Y.H., Hummes, D., Fissan, H., Quant, F.R. and Sem, G.J.: Design and evaluation of a nanometer aerosol differential mobility analyser (Nano-DMA), J. Aerosol Sci., 29, 1998, 497-509.
33. Hinds, W.C.: Aerosol Technology, J. Wiley, New York, 1999.
34. Friedlander, S.K.: Smoke, Dust, and Haze, Oxford University Press, New York, 2000.
35. Liu, P., Ziemann, P.J., Kittelson, D.B. and McMurry, P.H.: Generating particle beam of controlled dimensions and divergence: I. Theory of particle motion in aerodynamic lenses and nozzle expansion, Aerosol Sci. Technol., 22, 1995, 293-313.
36. Liu, P., Ziemann, P.J., Kittelson, D.B. and McMurry, P.H.: Generating particle beam of controlled dimensions and divergence: II. Experimental evaluation of particle motion in aerodynamic lenses and nozzle expansions, Aerosol Sci. Technol., 22, 1995, 314-324.
37. Fernandez de la Mora, J. and Riesco-Chueca, P.: Aerodynamic focusing of particles in a carrier gas, J. Fluid Mech., 195, 1988, 1-21.
38. Fernandez de la Mora, J. and Rosell-Llompart, J.: Aerodynamic focusing of heavy molecules in seeded supersonic jets, J. Chem. Phys., 91, 1989, 2603-2615.
39. Liu, D.C. and Lee, C.P.: Novel fabrication technique towards quantum dots, Appl. Phys. Lett., 63, 1993, 3503-3505.
40. Rossnagel, S.M., Mikalsen, D., Kinoshita, H. and Cuomo, J.J.: Collimated magnetron sputter deposition, J. Vac. Sci. Technol. A, 9, 1991, 261-265.
41. Xia, Y. and Whitesides, G.M.: Soft lithography, Angew. Chem. Int. Ed., 37, 1998, 550-575.
42. Di Fonzo, F., Gidwani, A., Fan, M.H., Neumann, D., Iordanoglou, D.I., Heberlein, J.V.R., Tymiak, N., Gerberich, W.W. and Rao, N.P.: Focused nanoparticle beam deposition of patterned microstructures, Appl. Phys. Lett., 77, 2000, 910-912.
43. Barborini, E., Piseri, P., Podesta, A. and Milani, P.: Cluster beam microfabrication of patterns of threedimensional nanostructured objects, Appl. Phys. Lett., 77, 2000, 1059-1061.
44. Milani, P., Piseri, P., Barborini, E., Lenardi, C., Castelnovo, C. and Podesta, A.: Cluster assembling of nanostructured carbon, in: Nanostructured carbon for advanced applications, Benedek, G., Milani, P., Ralchenko, V.G. (eds), NATO-ASI Series II, Mathematics, Physics and Chemistry, Kluwer, Dordrecht, 2001.
45. 2 in a continuous flow hot-wall aerosol reactor, J. Mater. Res., 12, 1997, 552-559.
46. Powell, Q.H., Fotou, G.P., Kodas, T.T. and Anderson, B.M.: Synthesis of alumina- and alumina/silica-coated titania particles in an aerosol flow reactor, Chem. Mater., 9, 1997, 685-693.
47. 2 in a gas-phase process, Aerosol Sci. Technol., 33, 2000, 557-571.
48. Madler, L.: Liquid-fed aerosol reactors for one-step synthesis of nano-structured particles, KONA, 22, 2004, 107-120.
49. Magnusson, M.H., Deppert, K., Malm, J.-O., Bovin, J.-O. and Samuelson, L.: Gold nanoparticles: Production, reshaping, and thermal charging, J. Nanopart. Res., 1, 1999, 243-251.
50. Nakaso, K., Shimada, M., Okuyama, K. and Deppert, K.: Evaluation of the change in the morphology of gold nanoparticles during sintering, J. Aerosol Sci., 33, 2002, 1061-1074.
51. Nanda, K.K., Kruis, F.E., Fissan, H. and Acet, H.: Band-gap tuning of PbS nanoparticles by in-flight sintering of size classified aerosols, J. Appl. Phys., 91, 2002, 2315-2321.
52. Karlsson, M.N.A., Deppert, K., Magnusson, M.H., Karlsson, L.S. and Malm, J.-O.: Size- and compositioncontrolled Au-Ga aerosol nanoparticles, Aerosol Sci. Technol., 38, 2004, 948-954.
53. Kruis, F.E., Fissan, H. and Peled, A.: Synthesis of nanoparticles in the gas phase for electronic, optical and magnetic applications - a review, J. Aerosol Sci., 29, 1998, 511-535.
54. Binns, C., Trohidou, K.N., Bansmann, J., Baker, S.H., Blackman, J.A., Bucher, J.-P., Kechrakos, D., Kleibert, A., Louch, S., Meiwes-Broer, K.-H., Pastor, G.M., Perez, A. and Xie, Y.: The behaviour of nanostructured magnetic materials produced by depositing gasphase nanoparticles, J. Phys. D: Appl. Phys., 38, 2005, R357-R379.
55. Ogawa, H., Nishikawa, M. and Abe, A.: Hall measurement studies and an electrical conduction model of tin oxide ultrafine particle films, J. Appl. Phys., 53, 1982, 4448-4455.
56. Takeuchi, M., Dohshi, S., Eura, T. and Anpo, M.: Preparation of titanium-silicon binary oxide thin film photocatalysts by an ionized cluster beam deposition method. Their photocatalytic activity and photoinduced super-hydrophilicity, J.Phys. Chem. B, 107, 2003, 14278-14282.
57. 2 thin film photocatalysts prepared on quartz substrate by ionized cluster beam (ICB) deposition method, Catal. Lett., 106, 2006, 67-70.
58. Cadete Santos Aires, F.J., Sautet, P., Rousset, J.-L., Fuchs, G. and Melion, P.: Scanning tunneling microscopy study of model catalysts obtained by cluster beam deposition of palladium onto highly oriented pyrolytic graphite, J. Vacuum Sci. Technol. B, 12, 1994, 1776-1779.
59. Rousset, J.L., Cadete Santos Aires, F.J., Bornette, F., Cattenot, M., Pellarin, M., Stievano, L. and Renouprez, A.J.: Characterization and reactivity of Pd-Pt bimetallic supported catalysts obtained by laser vaporization of bulk alloy, Appl. Surface Sci., 164, 2000, 163-168.
60. Abbet, S., Judai, K., Klinger, L. and Heiz, U.: Synthesis of monodispersed model catalysts using softlanding cluster deposition, Pure Appl. Chem., 74, 2002, 1527-1535.
61. Barborini, E., Piseri, P., Li Bassi, A., Ferrari, A., Bottani, C.E. and Milani, P.: Synthesis of carbon films with controlled nanostructure by separation of neutral clusters in supersonic beams, Chem. Phys. Lett. 300, 1999, 633-638.
62. Gidwani, A.: Ph.D. Thesis, Department of Mechanical Engineering, University of Minnesota, Minneapolis, 55455, 2003.