Mechanical interactions of cuspal-coverage designs and cement thickness in a cusp-replacing ceramic premolar restoration: A finite element study

Medical and Biological Engineering and Computing

Volumn 47, Issue 4, 2009, Pages 367-374

  Chang, Yen Hsiang ^a   Lin, Wen Hsueng ^b   Kuo, Wen Chieh ^a   Chang, Chia Yu ^a   Lin, Chun Li ^c  

^a CHANG GUNG MEMORIAL HOSPITAL   (Taiwan)

^b LUNGHWA UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Taiwan)

^c NATIONAL YANG MING UNIVERSITY   (Taiwan)

Author keywords

Biomechanics; Cement thickness; Ceramic; Cuspal coverage; Finite element analysis

Indexed keywords

3D FINITE ELEMENT MODELS; CAVITY PREPARATIONS; CEMENT STRESS; CEMENT THICKNESS; CERAMIC; CUSPAL COVERAGES; CUSPAL-COVERAGE; FAILURE SHAPES; FINITE ELEMENT ANALYSIS; FINITE-ELEMENT STUDIES; MECHANICAL INTERACTIONS; PREPARATION DESIGNS;

BIOMECHANICS; CEMENTS; CERAMIC MATERIALS; DESIGN; ENAMELS; RESTORATION; THERMOELECTRICITY; THREE DIMENSIONAL;

FINITE ELEMENT METHOD;

BICUSPID; CERAMICS; DENTAL CEMENTS; DENTAL PROSTHESIS DESIGN; DENTAL RESTORATION, PERMANENT; DENTAL STRESS ANALYSIS; FINITE ELEMENT ANALYSIS; HUMANS; MODELS, BIOLOGICAL; TOOTH CROWN;

EID: 62649115513     PISSN: 01400118     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11517-008-0379-y     Document Type: Article

References (44)

1. Reeves GW, Lentz DL, O'Hava JW, McDaniel MD, Tobert WE (1992) Comparison of marginal adaptation between direct and indirect composites. Oper Dent 17:210-214
2. Ausiello P, Rengo S, Davidson CL, Watts DC (2004) Stress distributions in adhesively cemented ceramic and resin-composite Class II inlay restorations: A 3D-FEA study. Dent Mater 20:862-872. doi: 10.1016/ j.dental.2004.05.001
3. Al-Hiyasat AS, Saunders WP, Sharkey SW, Smith GM, Gilmour WH (1998) Investigation of human enamel wear against four dental ceramics and gold. J Dent 26:487-495. doi: 10.1016/S0300-5712(97)00041-9
4. Chen HY, Hickel R, Setcos JC, Kunzelmann KH (1999) Effects of surface finish and fatigue testing on the fracture strength of CAD-CAM and pressed-ceramic crowns. J Prosthet Dent 82:468-475. doi: 10.1016/ S0022-3913(99)70036-3
5. Martin N, Jedynakiewicz NM (1999) Clinical performance of CEREC ceramic inlays: A systematic review. Dent Mater 15:54-61. doi: 10.1016/ S0109-5641(99)00014-7
6. Denissen H, Dozic A, van der Zel J, van Waas M (2000) Marginal fit and short-term clinical performance of porcelain-veneered CICERO, CEREC, and Procera onlays. J Prosthet Dent 84:506-513. doi: 10.1067/mpr.2000.110258
7. Martin N, Jedynakiewicz NM (2000) Interface dimensions of CEREC-2 MOD inlays. Dent Mater 6:68-74. doi: 10.1016/S0109-5641(99)00089-5
8. Modelli J, Steagall L, Ishikiriama A, de Lima Navarro MF, Soares FB (1980) Fracture strength of human teeth with cavity preparations. J Prosthet Dent 43:419-422. doi: 10.1016/0022-3913(80)90213-9
9. Blaser PK, Lund MR, Cochran MA, Potter RH (1983) Effect of designs of class 2 preparations on resistance of teeth to fracture. Oper Dent 8:6-10
10. Khera SC, Goel VK, Chen RC, Gurusami SA (1991) Parameters of MOD cavity preparations: A 3-D FEM study, part II. Oper Dent 16:42-54
11. Toparli M, Gokay N, Aksoy T (1999) Analysis of a restored maxillary second premolar tooth by using three-dimensional finite element method. J Oral Rehabil 26:157-164. doi: 10.1046/j.1365-2842.1999.00342.x
12. Lin CL, Chang CH, Ko CC (2001) Multifactorial analysis of an MOD-restored human premolar using auto-mesh finite element approach. J Oral Rehabil 28:576-585. doi: 10.1046/j.1365-2842.2001.00721.x
13. Fennis WMM, Kuijs RH, Barink M, Kreulen CM, Verdonschot N, Creugers NHJ (2005) Can internal stresses explain the fracture resistance of cusp-replacing composite restorations? Eur J Oral Sci 113:443-448. doi: 10.1111/j.1600-0722.2005.00233.x
14. Fennis WMM, Kuijs RH, Kreulen CM, Verdonschot N, Creugers NHJ (2004) Fatigue resistance of teeth restored with cuspal-coverage composite restorations. Int J Prosthodont 17:313-317
15. Kuijs RH, Fennis WMM, Kreulen CM, Roeters FJM, Burgersdijk RCW (2003) Fracture strength of cusp replacing resin composite restorations. Am J Dent 16:13-16
16. Lin CL, Chang YH, Chang WJ, Cheng MH (2006) Evaluation of a reinforced slot design for CEREC system to restore extensively compromised premolars. J Dent 34:221-229. doi: 10.1016/j.jdent.2005.05.009
17. Romão W Jr, Miranda WG Jr, Cesar PF, Braga RR (2004) Correlation between microleakage and cement thickness in three Class II inlay ceramic systems. Oper Dent 29-2:212-218
18. Lim C, Ironside JG (1997) Grit blasting and the marginal accuracy of two ceramic venner systems-a pilot study. J Prosthet Dent 77:359-364. doi: 10.1016/S0022-3913(97)70159-8
19. Audenino G, Bresciano ME, Bassi F, Carossa S (1999) In vitro evaluation of fit of adhesively luted ceramic inlays. Int J Prosthodont 12:342-347
20. Mou SH, Chai T, Wang JS, Shiau YY (2002) Influence of different convergence angles and tooth preparation heights on the internal adaptation of Cerec crowns. J Prosthet Dent 87:248-255. doi: 10.1067/ mpr.2002.122011
21. Leinfelder KF, Isenberg BP, Essig ME (1989) A new method for generating ceramic restorations: A CAD-CAM system. J Am Dent Assoc 118:703-707
22. Sjogren G (1995) Marginal and internal fit of four different types of ceramic inlays after luting. An in vitro study. Acta Odontol Scand 53:24-28. doi: 10.3109/00016359509005940
23. Feilzer AJ, De Gee AJ, Davidson CL (1989) Increased wall-to-wall curing contraction in thin bonded resin layers. J Dent Res 68:48-50
24. Rees JS, Jacobsen PH (1992) Stresses generated by luting resins during cementation of composite and ceramic inlays. J Oral Rehabil 19:115-122. doi: 10.1111/j.1365-2842.1992.tb01088.x
25. Hahn P, Attin T, Grofke M, Hellwig E (2001) Influence of resin cement viscosity on microleakage of ceramic inlays. Dent Mater 17:191-196. doi: 10.1016/S0109-5641(00)00067-1
26. Ausiello P, Rengo S, Davidson CL, Watts DC (2004) Stress distributions in adhesively cemented ceramic and resin-composite Class II inlay restorations: A 3D-FEA study. Dent Mater 20:862-872. doi: 10.1016/ j.dental.2004.05.001
27. Lin CL, Wang JC, Kuo YC (2006) Numerical simulation on the biomechanical interactions of tooth/implant-supported system under various occlusal forces with rigid/non-rigid connections. J Biomech 39:453-463. doi: 10.1016/j.jbiomech.2004.11.009
28. Boccaccio A, Prendergast PJ, Pappalettere C, Kelly DJ (2008) Tissue differentiation and bone regeneration in an osteotomized mandible: A computational analysis of the latency period. Med Biol Eng Comput 46(3):283-298. doi: 10.1007/s11517-007-0247-1
29. Akca K, Cehreli MC (2006) Biomechanical consequences of progressive marginal bone loss around oral implants: A finite element stress analysis. Med Biol Eng Comput 44(7):527-535. doi: 10.1007/ s11517-006-0072-y
30. Maruyama T, Nakamura Y, Hayashi T, Kato K (2006) Computer-aided determination of occlusal contact points for dental 3-D CAD. Med Biol Eng Comput 44(5):445-450. doi: 10.1007/s11517-006-0046-0
31. Lin CL, Chang CH, Cheng CS, Lee HE (1999) Three dimensional finite element meshing generation for maxillary second premolar. Comput Methods Programs Biomed 59:187-195. doi: 10.1016/S0169-2607(99)00004-8
32. Lin CL, Lee HE, Wang CH, Chang KH (2003) Interfacial stress analysis between posterior resin-bonded bridge and abutments by finite element approach. Comput Methods Programs Biomed 72:55-64. doi: 10.1016/ S0169-2607(02)00116-5
33. Wheeler R (1974) Dental anatomy, physiology and occlusion. WB Saunders Co, Philadelphia
34. Goel VK, Khera SC, Gurusami S, Chen RC (1992) Effect of cavity depth on stresses in a restored tooth. J Prosthet Dent 67:174-183. doi: 10.1016/ 0022-3913(92)90449-K
35. Farah JW, Craig RG, Meroueh KA (1989) Finite element analysis of three- and four- unit bridges. J Oral Rehabil 16:603-611. doi: 10.1111/ j.1365-2842.1989.tb01384.x
36. Benzing UR, Gall H, Weber H (1995) Biomechanical aspects of two different implant-prosthetic concepts for edentulous maxillae. Int J Oral Maxillofac Implants 10:188-198
37. Fischer H, Dautzenberg G, Marx R (2001) Nondestructive estimation of the strength of dental ceramic materials. Dent Mater 17:289-295. doi: 10.1016/S0109-5641(00)00086-5
38. Kelly JR, Tesk JA, Sorensen JA (1995) Failure of all-ceramic fixed partial dentures in vitro and in vivo: Analysis and modeling. J Dent Res 74:1253-1258
39. Hannig C, Westphal C, Becker K, Attin T (2005) Fracture resistance of endodontically treated maxillary premolars restored with CAD/CAM ceramic inlays. J Prosthet Dent 94:342-349. doi: 10.1016/j.prosdent.2005.08.004
40. Van Meerbeek B, Inokoshi S, Willems G, Noack MJ, Braem M, Lambrechts P et al (1992) Marginal adaptation of four tooth-coloured inlay systems in vivo. J Dent 20:18-26. doi: 10.1016/0300-5712(92)90004-V
41. Schmalz G, Federlin M, Reich E (1995) Effect of dimension of luting space and luting composite on marginal adaptation of a class II ceramic inlay. J Prosthet Dent 73:392-399. doi: 10.1016/S0022-3913(05)80337-3
42. Provatidis CG (2000) A comparative FEM-study of tooth mobility using isotropic and anisotropic models of the periodontal ligament. Finite element method. Med Eng Phys 22:359-370. doi: 10.1016/ S1350-4533(00)00055-2
43. Toms SR, Dakin GJ, Lemons JE, Eberhardt AW (2002) Quasi-linear viscoelastic behavior of the human periodontal ligament. J Biomech 35:1411-1415. doi: 10.1016/S0021-9290(02)00166-5
44. Yoshida N, Koga Y, Peng CL, Tanaka E, Kobayashi K (2001) In vivo measurement of the elastic modulus of the human periodontal ligament. Med Eng Phys 23:567-572. doi: 10.1016/S1350-4533(01)00073-X