Comparison of the work-hardening of metallic sheets using tensile and shear strain paths

International Journal of Plasticity

Volumn 25, Issue 5, 2009, Pages 733-751

  Thuillier, S ^a   Manach, P Y ^a  

^a UNIVERSITÉ DE BRETAGNE SUD   (France)

Author keywords

B. Anisotropic material; B. Elasto viscoplastic material; B. Finite strain; B. Metallic materials; C. Mechanical testing

Indexed keywords

ANISOTROPY; CHARACTERIZATION; EIGENVALUES AND EIGENFUNCTIONS; GAGES; KINEMATICS; MATERIALS TESTING; STRAIN HARDENING; TENSILE TESTING; UNLOADING; VISCOPLASTICITY;

ANISOTROPIC MATERIAL; ELASTO-VISCOPLASTIC MODELS; ELASTOVISCOPLASTIC MATERIALS; EQUIVALENT PLASTIC STRAIN; FINITE STRAIN; KINEMATIC WORK-HARDENING; METALLIC MATERIAL; THEORETICAL KINEMATICS;

SHEAR STRAIN;

EID: 61849086736     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2008.07.002     Document Type: Article

References (62)

1. Armstrong, P.J., Frederick, C.O., 1966. A mathematical representation of the multiaxial Bauschinger effect. GEGB Report RD/B/N731.
2. Bouvier S., Haddadi H., Levée P., and Teodosiu C. Simple shear tests: experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains. Journal of Materials Processing Technology 172 (2006) 96-103
3. Bouvier S., Gardey B., Haddadi H., and Teodosiu C. Characterization of the strain-induced plastic anisotropy of rolled sheets by using sequences of simple shear and uniaxial tensile tests. Journal of Materials Processing Technology 174 (2006) 115-126
4. Brunet M., Morestin F., and Godereaux S. Non linear kinematic hardening identification for anisotropic sheet metals with bending-unbending tests. Journal of Engineering Materials and Technology 123 (2001) 378-383
5. Choi Y., Han C.S., Lee J.K., and Wagoner R.H. Modeling multi-axial deformation of planar anisotropic elasto-plastic materials, part I: theory. International Journal of Plasticity 22 (2006) 1745-1764
6. Choi Y., Han C.S., Lee J.K., and Wagoner R.H. Modeling multi-axial deformation of planar anisotropic elasto-plastic materials, part II: applications. International Journal of Plasticity 22 (2006) 1765-1783
7. Choteau M., Quaegebeur P., and Degallaix S. Modelling of Bauschinger effect by various constitutive relations derived from thermodynamical formulation. Mechanics of Materials 37 (2005) 1143-1152
8. Cleveland R.M., and Ghosh A.K. Inelastic effects on springback in metals. International Journal of Plasticity 18 (2002) 769-785
9. Dickson J.I., Boutin J., and Handfield L. A comparison of two simple methods for measuring cyclic internal and effective stress. Materials Science and Engineering A 64 (1984) L7-L11
10. Duchêne L., Lelotte T., Flores P., Bouvier S., and Habraken A.M. Rotation of axes for anisotropic metal in FEM simulations. International Journal of Plasticity 24 3 (2008) 397-427
11. Feaugas X. On the origin of the tensile flow stress in the stainless steel AISI 316L at 300 K: back stress and effective stress. Acta Materialia 47 (1999) 3617-3632
12. Feaugas X., and Gaudin C. Ratchetting process in the stainless steel AISI 316L at 300 K: an experimental investigation. International Journal of Plasticity 20 (2004) 643-662
13. Fjeldly A., Roven H.J., and Rauch E. Shear deformation properties of extruded AlZnMg alloys. Scripta Materialia 38 (1998) 709-714
14. Flores P., Rondia E., and Habraken A.M. Development of experimental equipment for the identification of constitutive laws. International Journal of Forming Processes 8 (2005) 117-137
15. Flores P., Duchêne L., Bouffioux C., Lelotte T., Henrard C., Pernin N., Van Bael A., He S., Duflou J., and Habraken A.M. Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming. International Journal of Plasticity 23 (2007) 420-449
16. Gallée S., Manach P.Y., and Thuillier S. Mechanical behavior of a metastable austenitic stainless steel under simple and complex loading paths. Materials Science and Engineering A 466 (2007) 47-55
17. Gau J.T., and Kinzel G.L. A new model for springback prediction in which the Bauschinger effect is considered. International Journal of Mechanical Sciences 43 (2001) 1813-1832
18. Geng L., and Wagoner R.H. Role of plastic anisotropy and its evolution on springback. International Journal of Mechanical Sciences 44 (2002) 123-148
19. Gilormini P. Sur les référentiels locaux objectifs en mécanique des milieux continus. Comptes Rendus de l'Académie des Sciences de Paris 318 (1994) 1153-1159
20. Green A.E., and Zerna W. Theoretical Elasticity. 2nd ed. (1968), Oxford University Press
21. G'Sell C., Boni S., and Shrivastava S. Application of the plane simple shear test for determination of the plastic behavior of solid polymers at large strains. Journal of Materials Science 18 (1983) 903-918
22. Haddadi H., Bouvier S., Banu M., Maier C., and Teodosiu C. Towards an accurate description of the anisotropic behavior of sheet metals under large plastic deformations: Modelling, numerical analysis and identification. International Journal of Plasticity 22 (2006) 2226-2271
23. Haddag B., Balan T., and Abed-Meraim F. Investigation of advanced strain-path dependent material models for sheet metal forming simulations. International Journal of Plasticity 23 (2007) 951-979
24. Hahm J.H., and Kim K.H. Anisotropic work hardening of steel sheets under plane stress. International Journal of Plasticity 24 (2008) 1097-1127
25. Han K., Van Tyne C.J., and Levy B.S. Effect of strain and strain rate on the Bauschinger effect response of three different steels. Metallurgical and Materials Transactions A 36 (2005) 2379-2384
26. Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society of London A 193 (1948) 281-297
27. Hu Z., Rauch E.F., and Teodosiu C. Work-hardening behavior of mild steel under stress reversal at large strains. International Journal of Plasticity 8 (1992) 839-856
28. Hu W. An orthotropic yield criterion in a 3D general stress state. International Journal of Plasticity 21 (2005) 1771-1796
29. Kuwabara T., Morita Y., Miyashita Y., and Takahashi S. Elastic-plastic behavior of sheet metal subjected to in-plane reverse loading. Proceedings of Plasticity95 Dynamic Plasticity and Structural Behaviors (1995), Gordon and Breach, London pp. 841-844
30. Lee M.G., Kim D., Kim C., Wenner M.L., Wagoner R.H., and Chung K. Springback evaluation of automotive sheets based on anisotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. Part II: characterization of material properties. International Journal of Plasticity 21 (2005) 883-914
31. Lee M.G., Kim S.J., Wagoner R.H., Chung K., and Kim H.Y. Constitutive modeling for anisotropic/asymmetric hardening behavior of magnesium alloy sheets. International Journal of Plasticity 24 (2008) 545-582
32. Lemaitre, J., Chaboche, J.L., 1996. Mécanique des matériaux solides. Editions Dunod, Paris France.
33. Li X., Yang Y., Wang Y., Bao J., and Li S. Effect of the material-hardening mode on springback simulation accuracy of V-free bending. Journal of Materials Processing and Technology 123 (2002) 209-211
34. Manach, P.Y., 1989. Analyse par simulations numériques des non-homogénéités au cours d'essais mécaniques. Master's Thesis, Grenoble France.
35. Manach P.Y., and Favier D. Shear and tensile thermomechanical behavior of near equiatomic NiTi alloy. Materials Science and Engineering A 222 (1997) 45-57
36. Manach P.Y., and Couty N. Elastoviscohysteresis constitutive law in convected coordinate frames: application to finite deformation shear tests. Computational Mechanics 28 (2002) 17-25
37. Miyauchi K. A proposal of a planar simple shear. Journal of Materials Science 18 (1977) 903-918
38. Miyauchi K. Deformation path effect on stress-strain relation in sheet metals. Journal of Materials Processing Technology 34 (1992) 195-200
39. Mohanraj J., Barton D.C., Ward I.M., Dahoun A., Hiver J.M., and G'Sell C. Plastic deformation and damage of polyoxymethylene in the large strain range at elevated temperatures. Polymer 47 (2006) 5852-5861
40. Morestin F., and Boivin M. On the necessity of taking into account the variation in the Young modulus with plastic strain in elastic-plastic software. Nuclear Engineering and Design 162 (1996) 107-116
41. Narasimhan N., and Lovell M. Predicting springback in sheet metal forming: an explicit to implicit sequential solution procedure. Finite Elements in Analysis and Design 33 (1999) 29-42
42. Numisheet, 1996. In: Lee, J.K., Kinzel, G.L., Wagoner, R.H. (Eds.), Proceedings of the 3rd International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes. Dearborn, Michigan, USA.
43. Numisheet, 1999. In: Gelin, J.C., Picart, P. (Eds.), Proceedings of the 4th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes. Besançon, France.
44. Numisheet, 2002. In: Yang, D.Y., Oh, S.I., Huh, H., Kim, Y.H. (Eds.), Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes. Jeju Island, Korea.
45. Numisheet, 2005. In: Smith, L.M., Pourboghrat, F., Yoon, J.W. (Eds.), Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes. Detroit, Michigan, USA.
46. Oliveira M.C., Alves J.L., Chaparro B.M., and Menezes L.F. Study on the influence of work-hardening modeling in springback prediction. International Journal of Plasticity 23 (2007) 516-543
47. Pilvin P. Identification des paramètres de modèles de comportement. International Seminar on the inelastic behavior of solids Mécamat, Besançon, France (1988) 155-161
48. Rauch E.F., and G'Sell C. Flow localization induced by a change in strain path in mild steel. Materials Science and Engineering A 111 (1989) 71-80
49. Rauch E.F. Plastic anisotropy of sheet metals determined by simple shear tests. Materials Science and Engineering A 241 (1998) 179-183
50. Sidoroff F., and Dogui A. Some issues about anisotropic elastic-plastic models at finite strain. International Journal of Solids and Structures 38 (2001) 9569-9578
51. Suprun A.N. A constitutive model with three plastic constants: the description of anisotropic work hardening. International Journal of Plasticity 22 (2006) 1217-1233
52. Tang S. An anisotropic hardening rule for the analysis of sheet metal forming operations. Advanced Technology of Plasticity 3 (1990) 1149-1154
53. Teodosiu, C., Hu, H.C., 1998. Microstructure in the continuum modelling of plastic anisotropy. In: 19th Riso International Symposium on Materials Science, pp. 445-455.
54. Thuillier S., Le Maoût N., Manach P.Y., and Debois D. Numerical simulation of the roll hemming process. Journal of Materials Processing Technology 198 (2008) 226-233
55. Tong W. A plane stress anisotropic plastic flow theory for orthotropic sheet metals. International Journal of Plasticity 22 (2006) 497-535
56. Wack B., and Tourabi A. Cyclic simple shear of metallic sheets: application to aluminum-lithium alloy. Journal of Materials Science 28 (1993) 4735-4743
57. Yang M., Akiyama Y., and Sasaki T. Evaluation of change in material properties due to plastic deformation. Journal of Materials Processing Technology 151 (2004) 232-236
58. Yeganeh M. Incorporation of yield surface distortion in finite deformation constitutive modeling of rigid-plastic hardening materials based on the Hencky logarithmic strain. International Journal of Plasticity 23 (2007) 2029-2057
59. Yoon J.W., Barlat F., Gracio J.J., and Rauch E. Anisotropic strain hardening behavior in simple shear for cube textured aluminum alloy sheets. International Journal of Plasticity 21 (2005) 2426-2447
60. Yoshida F., Urabe M., and Toropov V.V. Identification of material parameters in constitutive model for sheet metals from cyclic bending tests. International Journal of Mechanical Science 2-3 (1998) 237-249
61. Yoshida F., Uemori T., and Fujiwara K. Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain. International Journal of Plasticity 18 (2002) 633-659
62. Zhao K.M., and Lee J.K. Finite element analysis of the three-point bending of sheet metals. Journal of Materials Processing Technology 122 (2002) 6-11