-
1
-
-
38349017605
-
-
ABAQUS, Hibbitt, Karlson & Sorensen Inc
-
ABAQUS, 2003. User's manual for version 6.4, Hibbitt, Karlson & Sorensen Inc.
-
(2003)
User's Manual for Version 6.4
-
-
-
2
-
-
0033903117
-
Kinematic hardening model suitable for ratcheting with steady-state
-
Abdel-Karim, M., Ohno, N., 2000. Kinematic hardening model suitable for ratcheting with steady-state. Int. J. Plasticity 16, 225-240.
-
(2000)
Int. J. Plasticity
, vol.16
, pp. 225-240
-
-
Abdel-Karim, M.1
Ohno, N.2
-
3
-
-
13844266998
-
Numerical integration method for kinematic hardening rules with partial activation of dynamic recovery term
-
Abdel-Karim, M., 2005. Numerical integration method for kinematic hardening rules with partial activation of dynamic recovery term. Int. J. Plasticity 21, 1303-1321.
-
(2005)
Int. J. Plasticity
, vol.21
, pp. 1303-1321
-
-
Abdel-Karim, M.1
-
5
-
-
0037137820
-
On the formulation of closest-point projection algorithms in elastoplasticity -part I: The variational structure
-
Armero, F., Pérez-Foguet, A., 2002. On the formulation of closest-point projection algorithms in elastoplasticity -part I: The variational structure. Int. J. Numer. Methods Engng. 53, 297-329.
-
(2002)
Int. J. Numer. Methods Engng.
, vol.53
, pp. 297-329
-
-
Armero, F.1
Pérez-Foguet, A.2
-
7
-
-
84879602233
-
Constitutive algorithm for plasticity model of texture, strain-path induced anisotropy and rate-sensitivity: Interface between constitutive algorithm and FE code (Abaqus/ Standard)
-
Balan, T., Teodosiu, C., 1999. Constitutive algorithm for plasticity model of texture, strain-path induced anisotropy and rate-sensitivity: interface between constitutive algorithm and FE code (Abaqus/ Standard). Internal Report, Paris 13 University.
-
(1999)
Internal Report, Paris 13 University
-
-
Balan, T.1
Teodosiu, C.2
-
8
-
-
0037411928
-
Plastic flow for nonmonotonic loading conditions of an aluminum alloy sheet sample
-
Barlat, F., Ferreira Duarte, J.M., Gracio, J.J., Lopes, A.B., Rauch, E.F., 2003. Plastic flow for nonmonotonic loading conditions of an aluminum alloy sheet sample. Int. J. Plasticity 19, 1215.
-
(2003)
Int. J. Plasticity
, vol.19
, pp. 1215
-
-
Barlat, F.1
Ferreira Duarte, J.M.2
Gracio, J.J.3
Lopes, A.B.4
Rauch, E.F.5
-
9
-
-
23144465958
-
Continuous, large strain, tension/compression testing of sheet material
-
Boger, R.K., Wagoner, R.H., Barlat, F., Lee, M.G., Chung, K., 2005. Continuous, large strain, tension/compression testing of sheet material. Int. J. Plasticity 21, 2319-2343.
-
(2005)
Int. J. Plasticity
, vol.21
, pp. 2319-2343
-
-
Boger, R.K.1
Wagoner, R.H.2
Barlat, F.3
Lee, M.G.4
Chung, K.5
-
10
-
-
31344444000
-
Simple shear tests: Experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains
-
Bouvier, S., Haddadi, H., Levée, P., Teodosiu, C., 2006. Simple shear tests: experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains. J. Mater. Proc. Technol. 172, 96-103.
-
(2006)
J. Mater. Proc. Technol.
, vol.172
, pp. 96-103
-
-
Bouvier, S.1
Haddadi, H.2
Levée, P.3
Teodosiu, C.4
-
11
-
-
0038701950
-
Anisotropic work-hardening behavior of structural steels and aluminum alloys at large strains
-
Bouvier, S., Teodosiu, C., Haddadi, H., Tabacaru, V., 2003. Anisotropic work-hardening behavior of structural steels and aluminum alloys at large strains. J. Phys. IV 105, 215-222.
-
(2003)
J. Phys. IV
, vol.105
, pp. 215-222
-
-
Bouvier, S.1
Teodosiu, C.2
Haddadi, H.3
Tabacaru, V.4
-
12
-
-
12444252153
-
Modeling of anisotropic work-hardening behavior of metallic materials subjected to strain-path changes
-
Bouvier, S., Alves, J.L., Oliveira, M.C., Menezes, L.F., 2005. Modeling of anisotropic work-hardening behavior of metallic materials subjected to strain-path changes. Comput. Mater. Sci. 32 (3-4), 301-315.
-
(2005)
Comput. Mater. Sci.
, vol.32
, Issue.3-4
, pp. 301-315
-
-
Bouvier, S.1
Alves, J.L.2
Oliveira, M.C.3
Menezes, L.F.4
-
13
-
-
0036144021
-
Measurement of springback
-
Carden, W.D., Geng, L.M., Matlock, D.K., Wagoner, R.H., 2002. Measurement of springback. Int. J. Mech. Sci. 44, 79-101.
-
(2002)
Int. J. Mech. Sci.
, vol.44
, pp. 79-101
-
-
Carden, W.D.1
Geng, L.M.2
Matlock, D.K.3
Wagoner, R.H.4
-
14
-
-
0022604479
-
Time independent constitutive theories for cyclic plasticity
-
Chaboche, J.L., 1986. Time independent constitutive theories for cyclic plasticity. Int. J. Plasticity 2 (2), 149.
-
(1986)
Int. J. Plasticity
, vol.2
, Issue.2
, pp. 149
-
-
Chaboche, J.L.1
-
15
-
-
0024863669
-
Constitutive equations for cyclic plasticity and cyclic viscoplasticity
-
Chaboche, J.L., 1989. Constitutive equations for cyclic plasticity and cyclic viscoplasticity. Int. J. Plasticity 5, 247-302.
-
(1989)
Int. J. Plasticity
, vol.5
, pp. 247-302
-
-
Chaboche, J.L.1
-
16
-
-
0026366839
-
On some modifications of kinematic hardening to improve the description of ratcheting effects
-
Chaboche, J.L., 1991. On some modifications of kinematic hardening to improve the description of ratcheting effects. Int. J. Plasticity 7, 661-678.
-
(1991)
Int. J. Plasticity
, vol.7
, pp. 661-678
-
-
Chaboche, J.L.1
-
17
-
-
0030168432
-
Integration methods for complex plastic constitutive equations
-
Chaboche, J.L., Cailletaud, G., 1996. Integration methods for complex plastic constitutive equations. Comput. Methods Appl. Mech. Engng. 133 (1-2), 125-155.
-
(1996)
Comput. Methods Appl. Mech. Engng.
, vol.133
, Issue.1-2
, pp. 125-155
-
-
Chaboche, J.L.1
Cailletaud, G.2
-
18
-
-
33646189597
-
Modeling multi-axial deformation of planar anisotropic elasto-plastic materials, part I: Theory
-
Choi, Y., Han, C.-S., Lee, J.K., Wagoner, R.H., 2006a. Modeling multi-axial deformation of planar anisotropic elasto-plastic materials, part I: theory. Int. J. Plasticity 22, 1745-1764.
-
(2006)
Int. J. Plasticity
, vol.22
, pp. 1745-1764
-
-
Choi, Y.1
Han, C.-S.2
Lee, J.K.3
Wagoner, R.H.4
-
19
-
-
33646189597
-
Modeling multi-axial deformation of planar anisotropic elasto-plastic materials, part I: Theory
-
Choi, Y., Han, C.-S., Lee, J.K., Wagoner, R.H., 2006b. Modeling multi-axial deformation of planar anisotropic elasto-plastic materials, part I: theory. Int. J. Plasticity 22, 1765-1783.
-
(2006)
Int. J. Plasticity
, vol.22
, pp. 1765-1783
-
-
Choi, Y.1
Han, C.-S.2
Lee, J.K.3
Wagoner, R.H.4
-
20
-
-
0025898240
-
The effect of restraining force on springback
-
Chu, C.-C., 1991. The effect of restraining force on springback. Int. J. Solids Struct. 27, 1035-1046.
-
(1991)
Int. J. Solids Struct.
, vol.27
, pp. 1035-1046
-
-
Chu, C.-C.1
-
21
-
-
0036778893
-
Modeling the Bauschinger effect for sheet metals, part I: Theory
-
Chun, B.K., Jinn, J.T., Lee, J.K., 2002a. Modeling the Bauschinger effect for sheet metals, part I: theory. Int. J. Plasticity 18, 571-595.
-
(2002)
Int. J. Plasticity
, vol.18
, pp. 571-595
-
-
Chun, B.K.1
Jinn, J.T.2
Lee, J.K.3
-
22
-
-
0036778892
-
Modeling the Bauschinger effect for sheet metals, part II: Applications
-
Chun, B.K., Jinn, J.T., Lee, J.K., 2002b. Modeling the Bauschinger effect for sheet metals, part II: applications. Int. J. Plasticity 18, 597-616.
-
(2002)
Int. J. Plasticity
, vol.18
, pp. 597-616
-
-
Chun, B.K.1
Jinn, J.T.2
Lee, J.K.3
-
23
-
-
11144297716
-
Springback evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. Part I: Theory and formulation
-
Chung, K., Lee, M.-G., Kim, D., Kim, C., Wenner, M.L., Barlat, F., 2005. Springback evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. Part I: Theory and formulation. Int. J. Plasticity 21, 861-882.
-
(2005)
Int. J. Plasticity
, vol.21
, pp. 861-882
-
-
Chung, K.1
Lee, M.-G.2
Kim, D.3
Kim, C.4
Wenner, M.L.5
Barlat, F.6
-
24
-
-
84879604566
-
Deep drawing process with different elastoplastic laws
-
Trondheim
-
De Montleau, P., Duchêne, L., Bouvier, S., Flores, P., Habraken, A.M., 2004. Deep drawing process with different elastoplastic laws. In: Esaform Conference Proceedings, Trondheim, pp. 163-166.
-
(2004)
Esaform Conference Proceedings
, pp. 163-166
-
-
De Montleau, P.1
Duchêne, L.2
Bouvier, S.3
Flores, P.4
Habraken, A.M.5
-
25
-
-
33750477025
-
Sheet springback prediction based on non-linear combined hardening rule and Barlat89's yielding function
-
Dongjuan, Z., Zhenshan, C., Xueyu, R., Yuqiang, L., 2006. Sheet springback prediction based on non-linear combined hardening rule and Barlat89's yielding function. Comp. Mater. Sci. 38, 256-262.
-
(2006)
Comp. Mater. Sci.
, vol.38
, pp. 256-262
-
-
Dongjuan, Z.1
Zhenshan, C.2
Xueyu, R.3
Yuqiang, L.4
-
26
-
-
0347795000
-
Material hardening model sensitivity in spring-back predictions
-
Duffett, G., Weyler, R., Cruz, C., 2002. Material hardening model sensitivity in spring-back predictions. In: Conference Proceedings of Numisheet2002, pp. 85-90.
-
(2002)
Conference Proceedings of Numisheet2002
, pp. 85-90
-
-
Duffett, G.1
Weyler, R.2
Cruz, C.3
-
27
-
-
33750341906
-
U-channel forming analysis with an emphasis on springback deformation
-
Firat, M., 2007. U-channel forming analysis with an emphasis on springback deformation. Mater. Des. 28, 147-154.
-
(2007)
Mater. Des.
, vol.28
, pp. 147-154
-
-
Firat, M.1
-
28
-
-
0026479669
-
Exponential integration algorithms for first-order ODES with application to viscoplasticity
-
Recent Advances on Damage Mechanics and Plasticity, Tempe
-
Freed, A.D., Walker, K.P., 1992. Exponential integration algorithms for first-order ODES with application to viscoplasticity, NASA TM 105.587, ASME Summer Conference on Mechanics and Materials. Recent Advances on Damage Mechanics and Plasticity, Tempe.
-
(1992)
NASA TM 105587, ASME Summer Conference on Mechanics and Materials
-
-
Freed, A.D.1
Walker, K.P.2
-
29
-
-
0035427237
-
A new model for springback prediction in which the Bauschinger effect is considered
-
Gau, J.T., Kinzel, G.L., 2001. A new model for springback prediction in which the Bauschinger effect is considered. Int. J. Mech. Sci. 43, 1813-1832.
-
(2001)
Int. J. Mech. Sci.
, vol.43
, pp. 1813-1832
-
-
Gau, J.T.1
Kinzel, G.L.2
-
32
-
-
0036142457
-
Role of plastic anisotropy and its evolution on springback
-
Geng, L., Wagoner, R.H., 2002. Role of plastic anisotropy and its evolution on springback. Int. J. Mech. Sci. 44, 123-148.
-
(2002)
Int. J. Mech. Sci.
, vol.44
, pp. 123-148
-
-
Geng, L.1
Wagoner, R.H.2
-
33
-
-
0036778888
-
Anisotropic hardening equations derived from reverse-bend testing
-
Geng, L., Shen, Y., Wagoner, R.H., 2002. Anisotropic hardening equations derived from reverse-bend testing. Int. J. Plasticity 18 (5-6), 743-767.
-
(2002)
Int. J. Plasticity
, vol.18
, Issue.5-6
, pp. 743-767
-
-
Geng, L.1
Shen, Y.2
Wagoner, R.H.3
-
34
-
-
0035465964
-
Identification of a microstructural model for steels subjected to large tensile and/or simple shear deformations
-
Haddadi, H., Bouvier, S., Levée, P., 2001. Identification of a microstructural model for steels subjected to large tensile and/or simple shear deformations. J. Phys. IV 11, 329-337.
-
(2001)
J. Phys. IV
, vol.11
, pp. 329-337
-
-
Haddadi, H.1
Bouvier, S.2
Levée, P.3
-
35
-
-
84879601157
-
-
Final report, LPMTM, University Paris 13
-
Haddadi, H., Tabacaru, V., Teodosiu, C., Maier, C., Bouvier, S., 2003. Tensile/Shear Tests and Identification of Elastoplastic Models for DP600, DP500 and DC06 Steels, Final report, LPMTM, University Paris 13, 54 p.
-
(2003)
Tensile/Shear Tests and Identification of Elastoplastic Models for DP600, DP500 and DC06 Steels
, pp. 54
-
-
Haddadi, H.1
Tabacaru, V.2
Teodosiu, C.3
Maier, C.4
Bouvier, S.5
-
36
-
-
33748790680
-
Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: Modelling, numerical analysis and identification
-
Haddadi, H., Bouvier, S., Banu, M., Maier, C., Teodosiu, C., 2006. Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification. Int. J. Plasticity 22, 2226-2271.
-
(2006)
Int. J. Plasticity
, vol.22
, pp. 2226-2271
-
-
Haddadi, H.1
Bouvier, S.2
Banu, M.3
Maier, C.4
Teodosiu, C.5
-
37
-
-
33749557814
-
Finite element prediction of strain-path induced anisotropy in deep drawing
-
Trondheim
-
Haddag, B., Balan, T., Abed-Meraim, F., 2004. Finite element prediction of strain-path induced anisotropy in deep drawing. In: Esaform Conference Proceedings, Trondheim, pp. 491-494.
-
(2004)
Esaform Conference Proceedings
, pp. 491-494
-
-
Haddag, B.1
Balan, T.2
Abed-Meraim, F.3
-
38
-
-
33749581050
-
Springback simulation: Impact of some advanced constitutive models and numerical parameters
-
Detroit
-
Haddag, B., Balan, T., Abed-Meraim, F., 2005. Springback simulation: impact of some advanced constitutive models and numerical parameters. In: Numisheet'05 Conference, Detroit, pp. 286-291.
-
(2005)
Numisheet'05 Conference
, pp. 286-291
-
-
Haddag, B.1
Balan, T.2
Abed-Meraim, F.3
-
39
-
-
0027701131
-
Stress computation and consistent tangent operator using non-linear kinematic hardening models
-
Hartmann, S., Haupt, P., 1993. Stress computation and consistent tangent operator using non-linear kinematic hardening models. Int. J. Numer. Methods Engng. 36, 3801-3814.
-
(1993)
Int. J. Numer. Methods Engng.
, vol.36
, pp. 3801-3814
-
-
Hartmann, S.1
Haupt, P.2
-
42
-
-
0002662566
-
Texture-and microstructure-induced anisotropy: Micromacro modeling, implementation
-
Mori, K. (Ed). Swets & Zeiltinger, Lisse
-
Hoferlin, E., Li, S., Van Bael, A., Van Houtte, P., 2001. Texture-and microstructure-induced anisotropy: micromacro modeling, implementation. In: Mori, K. (Ed.), Simulation of Materials Processing: Theory, Methods and Applications, Proceedings of the International Conference on Numiform 2001. Swets & Zeiltinger, Lisse, pp. 209-214.
-
(2001)
Simulation of Materials Processing: Theory, Methods and Applications, Proceedings of the International Conference on Numiform 2001
, pp. 209-214
-
-
Hoferlin, E.1
Li, S.2
Van Bael, A.3
Van Houtte, P.4
-
43
-
-
0001770579
-
Numerical implementation of constitutive models: Rate-independent deviatoric plasticity
-
Martinus Nij Publishers, Netherlands
-
Hughes, T.J.R., 1984. Numerical implementation of constitutive models: rate-independent deviatoric plasticity. In: Theoretical Foundation for Large-scale Computations for Nonlinear Material Behavior. Martinus Nij Publishers, Netherlands, pp. 29-57.
-
(1984)
Theoretical Foundation for Large-scale Computations for Nonlinear Material Behavior
, pp. 29-57
-
-
Hughes, T.J.R.1
-
44
-
-
0037186323
-
A canonical form return mapping algorithm for rate independent plasticity
-
Keavey, M.A., 2001. A canonical form return mapping algorithm for rate independent plasticity. Int. J. Numer. Methods Engng. 53, 1491-1510.
-
(2001)
Int. J. Numer. Methods Engng.
, vol.53
, pp. 1491-1510
-
-
Keavey, M.A.1
-
46
-
-
18444386844
-
On the implementation of a multi-surface kinematic hardening plasticity and its applications
-
Khoei, A.R., Jamali, N., 2005. On the implementation of a multi-surface kinematic hardening plasticity and its applications. Int. J. Plasticity 21, 1741-1770.
-
(2005)
Int. J. Plasticity
, vol.21
, pp. 1741-1770
-
-
Khoei, A.R.1
Jamali, N.2
-
47
-
-
0001777427
-
Elastic-plastic behavior of sheet metal subjected to in-plane reverse loading
-
Gordon and Breach
-
Kuwabara, T., Morita, Y., Miyashita, Y., Takahashi, S., 1995. Elastic-plastic behavior of sheet metal subjected to in-plane reverse loading. In: Proceedings of Plasticity'95, Dynamic Plasticity and Structural Behavior. Gordon and Breach.
-
(1995)
Proceedings of Plasticity'95, Dynamic Plasticity and Structural Behavior
-
-
Kuwabara, T.1
Morita, Y.2
Miyashita, Y.3
Takahashi, S.4
-
48
-
-
0007747093
-
Springback analysis of sheet metal subjected to bending-unbending under tension Part II (experimental verification). Advanced Technology of Plasticity
-
Altan T. (Ed), Columbus, Ohio
-
Kuwabara, T., Takahashi, S., Ito, K., 1996. Springback analysis of sheet metal subjected to bending-unbending under tension Part II (experimental verification). Advanced Technology of Plasticity. In: Altan T. (Ed.), Proceedings of the 5th ICTP, vol. II, Columbus, Ohio, pp. 747-50.
-
(1996)
Proceedings of the 5th ICTP
, vol.2
, pp. 747-750
-
-
Kuwabara, T.1
Takahashi, S.2
Ito, K.3
-
49
-
-
11144346167
-
Springback evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions Part II: Characterization of material properties
-
Lee, M.-G., Kim, D., Kim, C., Wenner, M.L., Wagoner, R.H., Chung, K., 2005a. Springback evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. Part II: Characterization of material properties. Int. J. Plasticity 21, 883-914.
-
(2005)
Int. J. Plasticity
, vol.21
, pp. 883-914
-
-
Lee, M.-G.1
Kim, D.2
Kim, C.3
Wenner, M.L.4
Wagoner, R.H.5
Chung, K.6
-
50
-
-
11144344968
-
Springback evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. Part III: Applications
-
Lee, M.-G., Kim, D., Kim, C., Wenner, M.L., Chung, K., 2005b. Springback evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions. Part III: Applications. Int. J. Plasticity 21, 915-953.
-
(2005)
Int. J. Plasticity
, vol.21
, pp. 915-953
-
-
Lee, M.-G.1
Kim, D.2
Kim, C.3
Wenner, M.L.4
Chung, K.5
-
52
-
-
0036142510
-
Simulation of springback
-
Li, K.P., Carden, W.P., Wagoner, R.H., 2002. Simulation of springback. Int. J. Mech. Sci. 44, 103-122.
-
(2002)
Int. J. Mech. Sci.
, vol.44
, pp. 103-122
-
-
Li, K.P.1
Carden, W.P.2
Wagoner, R.H.3
-
53
-
-
0001337384
-
Spring-back in sheet metal forming
-
Mattiasson, K., Strange, A., Thilderkvist, P., Samuelsson, A., 1995. Spring-back in sheet metal forming. In: Conference Proceedings of Numiform'95, pp. 115-124.
-
(1995)
Conference Proceedings of Numiform'95
, pp. 115-124
-
-
Mattiasson, K.1
Strange, A.2
Thilderkvist, P.3
Samuelsson, A.4
-
55
-
-
0000018410
-
Bauschinger effect in planar shear deformation of sheet metals
-
Miyauchi, K., 1984b. Bauschinger effect in planar shear deformation of sheet metals. Adv. Technol. Plasticity 1, 523.
-
(1984)
Adv. Technol. Plasticity
, vol.1
, pp. 523
-
-
Miyauchi, K.1
-
56
-
-
84879604906
-
-
3DS Benchmarks
-
3DS Benchmarks, 2002. Results of the experimental benchmark tests, "Growth Programme, Research Project 3DS, Digital Die Design System, Contract G1RDCT-2000-00104, IMS199900005".
-
(2002)
Results of the Experimental Benchmark Tests, "growth Programme, Research Project 3DS, Digital Die Design System, Contract G1RDCT-2000-00104, IMS199900005"
-
-
-
57
-
-
0041528225
-
NUMISHEET'93 benchmark problem
-
NUMISHEET'93 Benchmark Problem, 1993. In: Makinouchi, A., Nakamachi, E., Onate, E., Wagoner, R.H. (Eds.), Proceedings of the 2nd International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes -Verification.
-
(1993)
Proceedings of the 2nd International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes -Verification
-
-
Makinouchi, A.1
Nakamachi, E.2
Onate, E.3
Wagoner, R.H.4
-
58
-
-
0022736021
-
A constitutive model of cyclic plasticity for nonlinear hardening materials
-
Ohno, N., Kachi, Y., 1986. A constitutive model of cyclic plasticity for nonlinear hardening materials. ASME, J. Appl. Mech. 53, 395-404.
-
(1986)
ASME, J. Appl. Mech.
, vol.53
, pp. 395-404
-
-
Ohno, N.1
Kachi, Y.2
-
59
-
-
0027271731
-
Kinematic hardening rules with critical state of dynamic recovery: Part i -formulation and basic features for ratcheting behavior
-
Ohno, N., Wang, J.D., 1993a. Kinematic hardening rules with critical state of dynamic recovery: part I -formulation and basic features for ratcheting behavior. Int. J. Plasticity 9, 373-390.
-
(1993)
Int. J. Plasticity
, vol.9
, pp. 373-390
-
-
Ohno, N.1
Wang, J.D.2
-
60
-
-
0027188005
-
Kinematic hardening rules with critical state of dynamic recovery: Part II -application to experimental of ratcheting behavior
-
Ohno, N., Wang, J.D., 1993b. Kinematic hardening rules with critical state of dynamic recovery: part II -application to experimental of ratcheting behavior. Int. J. Plasticity 9, 391-403.
-
(1993)
Int. J. Plasticity
, vol.9
, pp. 391-403
-
-
Ohno, N.1
Wang, J.D.2
-
61
-
-
0022131597
-
Accuracy and stability of integration algorithms for elastoplastic constitutive relations
-
Ortiz, M., Popov, E.P., 1985. Accuracy and stability of integration algorithms for elastoplastic constitutive relations. Int. J. Numer. Methods Engng. 21, 1561-1576.
-
(1985)
Int. J. Numer. Methods Engng.
, vol.21
, pp. 1561-1576
-
-
Ortiz, M.1
Popov, E.P.2
-
62
-
-
0037137829
-
On the formulation of closest-point projection algorithms in elastoplasticity -part II: Globally convergent schemes
-
Pérez-Foguet, A., Armero, F., 2002. On the formulation of closest-point projection algorithms in elastoplasticity -part II: Globally convergent schemes. Int. J. Numer. Methods Engng. 53, 331-374.
-
(2002)
Int. J. Numer. Methods Engng.
, vol.53
, pp. 331-374
-
-
Pérez-Foguet, A.1
Armero, F.2
-
63
-
-
0002986456
-
Springback in plane strain stretch/draw sheet forming
-
Pourboghrat, F., Chu, E., 1995. Springback in plane strain stretch/draw sheet forming. Int. J. Mech. Sci. 36 (3), 327-341.
-
(1995)
Int. J. Mech. Sci.
, vol.36
, Issue.3
, pp. 327-341
-
-
Pourboghrat, F.1
Chu, E.2
-
64
-
-
85143741003
-
A new method of analyzing stresses and strains in work-hardening plastic solids
-
Prager, W., 1956. A new method of analyzing stresses and strains in work-hardening plastic solids. ASME J. App. Mech. Trans. 78, 493.
-
(1956)
ASME J. App. Mech. Trans.
, vol.78
, pp. 493
-
-
Prager, W.1
-
65
-
-
0031710347
-
Plastic anisotropy of sheet metals determined by simple shear tests
-
Rauch, E.F., 1998. Plastic anisotropy of sheet metals determined by simple shear tests. Mater. Sci. Engng. A241, 179-183.
-
(1998)
Mater. Sci. Engng.
, vol.A241
, pp. 179-183
-
-
Rauch, E.F.1
-
66
-
-
0346534626
-
Effect of non-linear kinematic hardening on spring-back analysis
-
Sabourin, F., Morestin, F., Brunet, M., 2002. Effect of non-linear kinematic hardening on spring-back analysis. In: Conference Proceedings of Numisheet2002, pp. 79-89.
-
(2002)
Conference Proceedings of Numisheet2002
, pp. 79-89
-
-
Sabourin, F.1
Morestin, F.2
Brunet, M.3
-
67
-
-
0026867998
-
Geometrically nonlinear enhanced strain mixed methods and the method of incompatible modes
-
Simo, J.C., Armero, F., 1992. Geometrically nonlinear enhanced strain mixed methods and the method of incompatible modes. Int. J. Numer. Methods Engng. 33, 1413-1449.
-
(1992)
Int. J. Numer. Methods Engng.
, vol.33
, pp. 1413-1449
-
-
Simo, J.C.1
Armero, F.2
-
68
-
-
0022010372
-
Consistent tangent operators for rate-independent elasto-plasticity
-
Simo, J., Taylor, R., 1985. Consistent tangent operators for rate-independent elasto-plasticity. Comput. Methods Appl. Mech. Engng. 48, 101-118.
-
(1985)
Comput. Methods Appl. Mech. Engng.
, vol.48
, pp. 101-118
-
-
Simo, J.1
Taylor, R.2
-
70
-
-
84879600553
-
On the implementation of the dislocation-based microstructural model
-
Teodosiu, C., 2003. On the implementation of the dislocation-based microstructural model. Private Communication.
-
(2003)
Private Communication
-
-
Teodosiu, C.1
-
71
-
-
0002837145
-
Evolution of the intragranular microstructure at moderate and large strains: Modeling and computational significance
-
Teodosiu, C., Hu, Z., 1995. Evolution of the intragranular microstructure at moderate and large strains: Modeling and computational significance. In: Simulation of Materials Processing: Theory, Methods. Numiform'95 Proceedings, pp. 173-182.
-
(1995)
Simulation of Materials Processing: Theory, Methods. Numiform'95 Proceedings
, pp. 173-182
-
-
Teodosiu, C.1
Hu, Z.2
-
73
-
-
84879603704
-
Modeling effects in springback simulation
-
Besançon
-
Till, E., Raab, A.E., 2005. Modeling effects in springback simulation. In: 24th IDDRG Conference. Besançon.
-
(2005)
24th IDDRG Conference
-
-
Till, E.1
Raab, A.E.2
-
74
-
-
0032673203
-
Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials
-
Yoon, J.W., Yang, D.Y., Chung, K., 1999. Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials. Comput. Methods Appl. Mech. Engng. 174, 23-56.
-
(1999)
Comput. Methods Appl. Mech. Engng.
, vol.174
, pp. 23-56
-
-
Yoon, J.W.1
Yang, D.Y.2
Chung, K.3
-
75
-
-
0036206997
-
A model of large-strain cyclic plasticity describing the Bauschinger effect and work hardening stagnation
-
Yoshida, F., Uemori, T., 2002. A model of large-strain cyclic plasticity describing the Bauschinger effect and work hardening stagnation. Int. J. Plasticity 18, 661-686.
-
(2002)
Int. J. Plasticity
, vol.18
, pp. 661-686
-
-
Yoshida, F.1
Uemori, T.2
-
76
-
-
0036778914
-
Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain
-
Yoshida, F., Uemori, T., Fujiwara, K., 2002. Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain. Int. J. Plasticity 18, 633-659.
-
(2002)
Int. J. Plasticity
, vol.18
, pp. 633-659
-
-
Yoshida, F.1
Uemori, T.2
Fujiwara, K.3
-
77
-
-
0002890147
-
A modification of Prager's hardening rule
-
Ziegler, H., 1959. A modification of Prager's hardening rule. Quart. Appl. Math. 17, 55-65.
-
(1959)
Quart. Appl. Math.
, vol.17
, pp. 55-65
-
-
Ziegler, H.1
|