Shear and tensile thermomechanical behavior of near equiatomic NiTi alloy

Materials Science and Engineering: A

Volumn 222, Issue 1, 1997, Pages 45-57

  Manach, Pierre Yves ^a   Favier, Denis ^b  

^a UNIVERSITÉ DE BRETAGNE SUD   (France)

^b LABORATOIRE SOLS SOLIDES STRUCTURES   (France)

Author keywords

Equiatomic nickel titanide; Shape memory alloys; Thermomechanical behavior

Indexed keywords

COMPUTER AIDED DESIGN; COMPUTER SOFTWARE; FINITE ELEMENT METHOD; MECHANICAL TESTING; NUMERICAL METHODS; SHAPE MEMORY EFFECT; SHEAR STRENGTH; TENSILE PROPERTIES; THERMOMECHANICAL TREATMENT;

EQUIATOMIC NICKEL TITANIDE; SHEAR TEST; TENSORIAL CONSTITUTIVE EQUATIONS; THERMOMECHANICAL PROPERTIES; VON MISES ASSUMPTIONS;

NICKEL ALLOYS;

EID: 0009448563     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0921-5093(96)10510-4     Document Type: Article

References (39)

1. T. Saburi, TiNi shape memory alloys and martensitic transformations, Proc. Int. Conf. Martensitic Transformations, Monterey, USA, 1993, p. 857.
2. L.C. Brinson and R. Lammering, Finite element analysis of the behavior of shape memory alloys and their applications, Int. J. Solids Struct., 30 (1993) 3261.
3. G. Rio, P.Y. Manach and D. Favier, Finite element simulation of 3D mechanical behavior of NiTi shape memory alloys, Arch. Mech., 47 (1995) 537.
4. I. Müller and K. Wilmanski, A model for phase transition in pseudoelastic bodies, Il Nuevo Cimento, 57B (1980) 283.
5. F. Falk, Model free energy, mechanics and thermodynamics of shape memory alloys, Acta Metall., 28 (1980) 1773.
6. L. Lü, E. Aernoudt, P. Wollants, J. Van Humbeeck and L. Delaey, Simulation of transformation hysteresis, Z. Metallk., 81 (1990) 613.
7. J. Ortin, Partial hysteresis cycles in shape memory alloys: experiments and modelling, J. Phys., C4 (1991) 13.
8. K. Tanaka, S. Kobayashi and Y. Sato, Thermomechanics of transformation pseudoelasticity and shape memory effect in alloys, Int. J. Plast., 2 (1986) 59.
9. D. Favier, Contribution à l'étude théorique de l'élastohystérésis à température variable: application aux propriétés de mémoire de forme, Thèse d'Etat, Institut National Polytechnique de Grenoble, Grenoble, France, 1988.
10. B. Raniecki, C. Lexcellent and K. Tanaka, Thermodynamic models of pseudoelastic behavior of shape memory alloys, Arch. Mech., 44 (1992) 261.
11. E. Patoor, A. Eberhardt and M. Berveiller, Potentiel pseudoélastique et plasticité de transformation martensitique dans les mono et polycristaux métalliques, Acta Metallurgica, 35 (1987) 2779.
12. P.G. McCormick, S. Miyazaki and Y. Liu, Intrinsic transformation influenced mechanical behavior in a NiTi alloy, Proc. Int. Conf. Martensitic Transformations, Monterey, USA, 1993, p. 999.
13. E.F. Rauch and C. G'Sell, Flow localization induced by a change in strain path in mild steel, Mater. Sci. Eng., A111 (1989) 71.
14. B. Wack and A. Tourabi, Cyclic simple shear of metallic sheets: application to aluminium-lithium alloy, J. Mater. Sci., 28 (1993) 4735.
15. P.Y. Manach and D. Favier, Origin of the two way memory effect in NiTi shape memory alloy, Scr. Metall Mater., 28 (1993) 1417.
16. S. Miyazaki, K. Otsuka and Y. Suzuki, Transformation pseudoelasticity and deformation behavior in a Ti-50.6at.%Ni alloy, Scr. Metall., 15 (1981) 287.
17. W. Tang, J. Cederström and R. Sandström, Property database for the development of shape memory alloy applications, J. Phys., C4 (1991) 129.
18. T. Saburi, M. Yoshida and S. Nenno, Deformation behavior of shape memory TiNi alloy crystals, Scr. Metall, 18 (1984) 363.
19. Y. Liu, Shape memory behavior in NiTi, Ph.D. Thesis, University of Western Australia, Perth Australia, 1990.
20. Y. Liu and P.G. McCormick, Influence of heat treatment on the mechanical behavior of a NiTi alloy, ISIJ Int., 9 (1989) 417.
21. S. Miyazaki, Y. Igo and K. Otsuka, Effect of thermal cycling on the transformation temperatures of TiNi alloys, Acta Metall., 34 (1986) 2045.
22. G.B. Stachowiak and P.G. McCormick, Shape memory behavior associated with the R and martensitic transformations in a NiTi alloy, Acta Metall., 36 (1988) 291.
23. S. Miyazaki, T. Imai, Y. Igo and K. Otsuka, Effect of cyclic deformation on the pseudoelasticity characteristics of TiNi alloys, Metall. Trans., 17A (1986) 115.
24. S. Eucken and T.W. Duerig, The effects of pseudoelastic pre-straining on the tensile behavior and two way shape memory effect in aged NiTi, Acta Metall., 37 (1989) 2245.
25. P.Y. Manach and D. Favier, Comparison between isothermal tensile and shear tests on a NiTi shape memory alloy, Proc. Int. Conf. Martensitic Transformation, Monterey, USA, 1993, p. 941.
26. K. Otsuka, C.M. Wayman, K. Nakai, H. Sakamoto and K. Shimizu, Superelasticity effects and stress-induced martensitic transformation in CuAlNi alloys, Acta Metall., 24 (1976) 207.
27. D. Favier, P. Guélin and P. Pégon, Thermomechanics of hysteresis effects in shape memory alloys, Proc. Int. Conf. Martensitic Transformation, Sydney, Australia, 1989, p. 559.
28. P.Y. Manach, Etude du comportement thermomécanique d'alliages à mémoire de forme NiTi, Thèse de Doctorat, Institut National Polytechnique de Grenoble, Grenoble, France, 1993.
29. D. Favier, P. Guélin and R. Cammarano, Application of a phenomenological elastohysteresis theory to the modelling of magnetisation, Proc. Int. Symp. Magnetic Anisotropy and Coercitivity in Rare-Earth Transition Metal Alloys, Camberra, Australia, 1992, p. 137.
30. S. Miyazaki, Y. Ohmi, K. Otsuka and Y. Suzuki, Characteristics of deformation and transformation pseudoelasticity in TiNi alloys, J. Phys., 43 (1982) 255.
31. S. Miura, T. Mori, N. Nakanishi, Y. Murakami and S. Kachi, Study of superelasticity associated with the thermoelastic martensitic transformation in AuCd alloys, Philos. Mag., 34 (1976) 377.
32. P. Wollants, J.R. Roos and L. Delaey, Thermally and stress induced thermoelastic martensitic transformations in the reference frame of equilibrium thermodynamics, Prog. Mater. Sci., 37 (1993) 227.
33. E. Patoor, A. Eberhardt and M. Berveiller, Thermomechanical behavior by martensitic transformation in single and polycrystals, Proc. 8th Risø Int. Symp. Metallurgy and Materials Science, Roskilde, Denmark, 1987, p. 465.
34. L. Orgeas and D. Favier, Non-symmetric tension-compression behaviour of NiTi alloy, J. Phys., C8 (1995) 605.
35. P. Vacher, Etude du comportement pseudoélastique d'alliages à mémoire de forme CuZnAl polycristallins, Thèse de Doctorat, Université de Franche Comté, Besançon, France, 1991.
36. D.C. Drucker and W. Prager, Soil mechanics and plasticity analysis of limit design, Q. Appl. Math., 10 (1952) 157.
37. A. Caneiro and M. Chandrasekaran, Thermoelastic martensitic transformation in β CuZnAl studied by density changes, Scr. Metall. Mater., 22 (1988) 1797.
38. P.V. Lade, Elasto-plastic stress-strain theory for cohesionless soil with curved yield surfaces, Int. J. Solids Struct., 13 (1977) 1019.
39. S. Krenk, Family of invariant stress surfaces, J. Eng. Mech., 122 (1996) 201.