Study on the influence of work-hardening modeling in springback prediction

International Journal of Plasticity

Volumn 23, Issue 3, 2007, Pages 516-543

  Oliveira, M C ^a   Alves, J L ^b   Chaparro, B M ^c   Menezes, L F ^a  

^a UNIVERSITY OF COIMBRA   (Portugal)

^b UNIVERSITY OF MINHO   (Portugal)

^c INSTITUTO POLITÉCNICO DE TOMAR   (Portugal)

Author keywords

B. Constitutive behavior; B. Elastoplastic material; B. Residual stress; C. Finite elements

Indexed keywords

CONSTITUTIVE BEHAVIOR; ELASTOPLASTIC MATERIALS; SPRINGBACK PREDICTION; STRESS GRADIENTS;

ANISOTROPY; COMPUTER SIMULATION; ELASTOPLASTICITY; FINITE ELEMENT METHOD; MICROSTRUCTURE; RESIDUAL STRESSES; STRAIN; STRESS ANALYSIS;

STRAIN HARDENING;

EID: 33845328772     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2006.07.003     Document Type: Article

References (72)

1. Alves, J.L., Menezes, L.F., 2001. Application of tri-linear and tri-quadratic 3-D solid finite elements in sheet metal forming simulations. In: Mori, K.-I. (Ed.), Proceedings of the Numiform'01 on Simulation of materials processing: Theory, Methods and Applications. Balkema, Rotterdam, pp. 639-644.
2. Alves, J.L., Oliveira, M.C., Menezes, L.F., 2004a. An advanced constitutive model in sheet metal forming simulation: the Teodosiu microstructural model and the Cazacu Barlat yield criterion. In: Glosh, S., Castro, J.C., Lee, J.K. (Eds.), Proceedings of the Numiform'04 on Materials Processing and Design: Modelling, Simulation and Applications, Amer Inst Physics, Melville, p. 1645.
3. Alves, J.L., Oliveira, M.C., Menezes, L.F., 2004b. Springback evaluation with several phenomenological yield criteria. Mater. Sci. Forum 455-456, 732-736.
4. Alves, J.L., Oliveira, M.C., Menezes, L.F., 2005. Drawbeads: to be or not to be. In: Cao, J., Shi, M.F., Stoughton, T.B., Wang, C.T., Zhang, L. (Eds.), Proceedings of Numisheet'05 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes: On the Cutting Edge of Technology, Part A, Amer Inst Physics 778, Melville, pp. 655-660.
5. Alves, J.L., Oliveira, M.C., Menezes, L.F., 2006. Numerical evaluation of the influence of the elastic properties evolution in springback prediction. In: Santos, A.D., Barata da Rocha, A., (Eds.), Proceedings of IDDRG'06 Conference of the International Deep Drawing Research Group: Drawing the Things to Come, Trends and Advances in Sheet Metal Forming, INEGI, Porto, pp. 161-168.
6. Areias, P.M.A., César de Sá, J.M.A., Conceição António, C.A., Fernandes, A.A., 2003. Analysis of 3D problems using a new enhanced strain hexahedral element. Int. J. Numer. Meth. Eng. 58 (11), 1382-1637.
7. Barlat, F., Lege, D.J., Brem, J.C., 1991. A six-component yield function for anisotropic materials. Int. J. Plasticity 7 (7), 693-712.
8. Bouvier, S, Teodosiu, C., Maier, C., Banu, M., Tabacaru, V., 2001. Selection and identification of elastoplastic models for the materials used in the benchmarks, WP3, Task 1, 18-Months Progress Report of the Digital Die Design Systems (3DS), IMS 1999 000051.
9. Bouvier, S., Alves, J.L., Oliveira, M.C., Menezes, L.F., 2005. Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain path changes. Comput. Mater. Sci. 32 (3-4), 301-315.
10. Buranathiti, T., Cao, J., 2005. Benchmark Simulation Results: Channel Draw/Cylindrical Cup 2-Stage Test (Benchmark 3). In: Proceedings of Numisheet'05 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes: On the Cutting Edge of Technology, Part B, Amer Inst Physics 778, Melville, pp. 1121-1133.
11. Carden, W.D., Geng, L.M., Matlock, D.K., Wagoner, R.H., 2002. Measurement of springback. Int. J. Mech. Sci. 44 (1), 79-101.
12. Cazacu, O., Barlat, F., 2001. Generalization of Drucker's yield criterion to orthotropic. Math. Mech. Solids 6 (6), 613-630.
13. Chaparro, B.M., Oliveira, M.C., Alves, J.L., Menezes, L.F., 2004. Work hardening models and the numerical simulation of the deep drawing process. Mater. Sci. Forum 455-456, 717-722.
14. Choi, Y., Han, C.-S., Lee, J.K., Wagoner, R.H., 2006a. Modeling multi-axial deformation of planar anisotropic elasto-plastic materials, part I: Theory. Int. J. Plasticity 22 (9), 1745-1764.
15. Choi, Y., Han, C.-S., Lee, J.K., Wagoner, R.H., 2006b. Modeling multi-axial deformation of planar anisotropic elasto-plastic materials, part II: Applications. Int. J. Plasticity 22 (9), 1765-1783.
16. Clausen, A.H., Hopperstad, O.S., Langseth, M., 2001. Sensitivity of model parameters in stretch bending of aluminium extrusions. Int. J. Mech. Sci. 43 (2), 427-453.
17. Cleveland, R.M., Ghosh, A.K., 2002. Inelastic effects on springback in metals. Int. J. Plasticity 18 (5-6), 769-785.
18. Courvoisier, L., Martiny, M., Ferron, G., 2003. Analytical modelling of drawbeads in sheet metal forming. J. Mater. Process Technol. 133 (3), 359-370.
19. Gau, J.-T., Kinzel, G.L., 2001. A new model for springback prediction in which the Bauschinger effect is considered. Int. J. Mech. Sci. 43 (8), 1813-1832.
20. Geng, L., Wagoner, R.H., 2002. Role of plastic anisotropy and its evolution on springback. Int. J. Mech. Sci. 44 (1), 123-148.
21. Geng, L., Shen, Y., Wagoner, R.H., 2002. Anisotropic hardening equations derived from reverse-bend testing. Int. J. Plasticity 18 (5-6), 743-767.
22. Haddadi, H., Bouvier, S., Banu, M., Maier, C., Teodosiu, C., 2006. Towards an accurate description of the anisotropic behaviour of sheet metals under large plastic deformations: modelling, numerical analysis and identification. Int. J. Plasticity 22 (12), 2226-2271.
23. Haddag, B., Balan, T., Abed-Meraim, F., 2005. Springback simulation: impact of some advanced constitutive models and numerical parameters. In: Cao, J., Shi, M.F., Stoughton, T.B., Wang, C.T., Zhang, L. (Eds.). Proceedings of Numisheet'05 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes: On the Cutting Edge of Technology, Part B, Amer Inst Physics 778, Melville, pp. 289-291.
24. Hill, R., 1948. A theory of the yielding and plastic flow of anisotropic materials. Proceedings of the Royal Society of London Series A-Mathematical, Physical and Engineering Science 193 (1033), 281-297.
25. Hiwatashi, S., Van Bael, A., Van Houtte, P., Teodosiu, C., 1997. Modelling of plastic anisotropy based on texture and dislocation structure. Comput. Mater. Sci. 9 (1-2), 274-284.
26. Hiwatashi, S., Van Bael, A., Van Houtte, P., Teodosiu, C., 1998. Prediction of forming limit strains under strainpath changes: application of an anisotropic model based on texture and dislocation structure. Int. J. Plasticity 17 (7), 647-669.
27. Hughes, T.J.R., 1980. Generalization of selective integration procedures to anisotropic and nonlinear. Int. J. Numer. Meth. Eng. 15, 1413-1418.
28. Jiao, Z.-P., Li, C., 2000. A new formulation of eight-node hexagonal solid element. Comput. Meth. Appl. Mech. Eng. 187 (1-2), 213-217.
29. Karafillis, A.P., Boyce, M.C., 1993. A general anisotropic yield criterion using bounds and a transformation weighting tensor. J. Mech. Phys. Solids 41 (12), 1859-1886.
30. Kase, K., Makinouchi, A., Nakagawa, T., Suzuki, H., Kimura, F., 1999. Shape error evaluation method of freeform surfaces. Comput. Aided Des. 31 (8), 495-505.
31. Kawka, M., Kakita, T., Makinouchi, A., 1998. Simulation of multi-step sheet metal forming processes by a static explicit FEM code. J. Mater. Process Technol. 80-81, 54-59.
32. Kyriakides, S., Corona, E., Miller, J.E., 2004. Effect of yield surface evolution on bending induced cross sectional deformation of thin-walled sections. Int. J. Plasticity 20 (4-5), 607-618.
33. Lee, S.W., Yang, D.Y., 1998. An assessment of numerical parameters influencing springback in explicit finite elements analysis of sheet metal forming process. J. Mater. Process. Technol. 80-81, 60-67.
34. Lee, S.W., Yoon, J.W., Yang, D.Y., 1999. Comparative investigation into the dynamic explicit and the static implicit method for springback of sheet metal stamping. Eng Computation 16 (2-3), 347-373.
35. Lee, M.-G., Kim, D., Kim, C., Wenner, M.L., Chung, K., 2005. Spring-back evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions, part III: applications. Int. J. Plasticity 21 (5), 915-953.
36. Lemaître, J., Chaboche, J.-L., 1985. Mechanics of Solid Materials. Cambridge University Press, Cambridge.
37. Leu, D.-K., 1997. A simplified approach for evaluating bendability and springback in plastic bending of anisotropic sheet materials. J. Mater. Process. Technol. 66 (1-3), 9-17.
38. Li, K.P., Carden, W.P., Wagoner, R.H., 2002a. Simulation of springback. Int. J. Mech. Sci. 44 (1), 103-122.
39. Li, X., Yang, Y., Wang, Y., Bao, J., Li, S., 2002b. Effect of the material-hardening mode on the springback simulation accuracy of V-free bending. J. Mater. Process. Technol. 123 (2), 209-211.
40. Li, S., Hoferlin, E., Van Bael, A., Van Houtte, P., Teodosiu, C., 2003. Finite element modelling of plastic anisotropy induced by texture and strain-path change. Int. J. Plasticity 19 (5), 647-674.
41. McMeeking, R.M., Rice, J.R., 1975. Finite element formulation for problems of large elastoplastic deformation. Int. J. Solids Struct. 11, 601-615.
42. Meinders, T., Carleer, B.D., Geijselaers, H.J.M., Huétink, J., 1998. The implementation of an equivalent drawbead model in a finite element code for sheet metal forming. J. Mater. Process. Technol. 83 (1-3), 234-244.
43. Menezes, L.F., Teodosiu, C., 2000. Three-dimensional numerical simulation of the deep-drawing process using solid finite element. J. Mater. Process. Technol. 97 (1-3), 100-106.
44. Menezes, L.F., Teodosiu, C., Makinouchi, A., 1991. 3-D solid elasto-plastic elements for simulating sheet metal forming processes by the finite element method. In: VDI Berichte (Eds.), Proceedings FE-simulation of 3-D Sheet Metal Forming Processes in Automotive Industry, vol. 864, pp. 381-403.
45. Menezes, L.F., Thuillier, S., Manach, P.Y., Bouvier, S., 2002. Influence or work hardening models on the numerical simulation of a reverse deep drawing process. In: Khan, A.S., Lopez Pamies, O.L. (Eds.), Proceedings of Plasticity'02 Plasticity, Damage and Fracture at Macro, Micro and Nanoscales. Neat Press Fulton, Maryland, pp. 331-333.
46. Morestin, F., Boivin, B., 1996. On the necessity of taking into account the variation in the Young modulus with plastic strain in elastic-plastic software. Nucl. Eng. Des. 162 (1), 107-116.
47. Narasimhan, N., Lovell, M., 1999. Predicting springback in sheet metal forming: an implicit to implicit sequential solution procedure. Finite Elem. Anal. Des. 33 (1), 29-42.
48. Nine, H.D., 1978. Drawbead Forces in Sheet Metal FormingMechanics of Sheet Metal Forming. Plenum Press, New York, pp. 179-211.
49. Oliveira, M.C., Alves, J.L., Menezes, L.F., 2002. Springback Evaluation using 3-D Finite Elements. In: Yang, D.Y., Oh, S.I., Huh, H., Kim, Y.H. (Eds.), Proceedings of Numisheet'02 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes: Verification of Simulation with Experiment, vol. 1, pp. 189-194.
50. Oliveira, M.C., Alves, J.L., Menezes, L.F., 2003a. Improvement of a frictional contact algorithm for strongly curved contact problems. Int. J. Numer. Meth. Eng. 58 (14), 2083-2101.
51. Oliveira, M.C., Alves, J.L., Menezes, L.F., 2003b. One step springback strategies in sheet metal forming. In: Owen, D.R.J., Oñate, E., Suárez, B. (Eds.), Proceedings of Complas'02 VII International Conference on Computational Plasticity -Fundamentals and Applications. International Center for Numerical Methods in Engineering, Barcelona, p. 87.
52. Oliveira, M.C., Baptista, A.J., Alves, J.L., Menezes, L.F., Green, D.E., Gnaeupel-Herold, T., Iadicola, M.A., Foecke, T., Stoughton, T.B., 2006. Two stage forming: experimental and FE analysis. In: Santos, A.D., Barata da Rocha, A. (Eds.), Proceedings of IDDRG'06 Conference of the International Deep Drawing Research Group: Drawing the things to come, Trends and Advances in Sheet Metal Forming, INEGI, Porto, pp. 279-286.
53. Papeleux, L., Ponthot, J.-P., 2002. Finite element simulation of springback in sheet metal forming. J. Mater. Process. Technol. 125-126, 785-791.
54. Peeters, B., Hoferlin, E., Van Houtte, P., Aernoudt, E., 2001a. Assessment of crystal plasticity based calculation of the lattice spin of polycrystalline metals for FE implementation. Int. J. Plasticity 17 (6), 819-883.
55. Peeters, B., Seefeldt, M., Teodosiu, C., Kalidindi, S.R., Van Houtte, P., Aernoudt, E., 2001b. Work-hardening/ softening behaviour of B.C.C. polycrystals during changing strain paths: I. An Integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an IF steel during twostage strain paths. Acta Mater. 49 (9), 1607-1619.
56. Peeters, B., Seefeldt, M., Teodosiu, C., Kalidindi, S.R., Van Houtte, P., Aernoudt, E., 2001c. Work-hardening/ softening behaviour of B.C.C. polycrystals during changing strain paths: II. TEM Observations of dislocation sheets in an IF steel during two-stage strain paths and their representation in terms of dislocation densities. Acta Mater. 49 (9), 1621-1632.
57. Peeters, B., Kalidindi, S.R., Teodosiu, C., Van Houtte, P., Aernoudt, E., 2002. A theoretical investigation of the influence of dislocation sheets on evolution of yield surfaces in single-phase B.C.C. polycrystals. J. Mech. Phys. Solids 50 (4), 783-807.
58. Reese, S., 2005. On a physically stabilized one point finite element formulation for three-dimensional finite elastoplasticity. Comput. Meth. Appl. Mech. Eng. 194 (45-47), 4685-4715.
59. Samuel, M., 2002. Influence of drawbead geometry on sheet metal forming. J. Mater. Process. Technol. 122, 94-103.
60. Shi, M.F., Huang, M., 2005. Specification for benchmark materials. In: Cao, J., Shi, M.F., Stoughton, T.B., Wang, C.T., Zhang, L. (Eds.). Proceedings of Numisheet'05 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes: On the Cutting Edge of Technology, Part B, Amer Inst Physics 778, Melville, pp. 1173-1178.
61. Stoughton, T.B., Yoon, J.W., 2006. Review of Drucker's postulate and the issue of plastic stability in metal forming. Int. J. Plasticity 22 (3), 391-433.
62. Stoughton, T., Green, D., Iadicola, M., 2005. Specification for BM3: two-stage channel/cup draw. In: Cao, J., Shi, M.F., Stoughton, T.B., Wang, C.T., Zhang, L. (Eds.), Proceedings of Numisheet'05 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes: On the Cutting Edge of Technology, Part B, Amer Inst Physics 778, Melville, pp. 1157-1172.
63. Teodosiu, C., 1989. The plastic spin: microstructural origin and computational significance. In: Owen, D.R.J., Hinton, E., Oñate, E. (Eds.), Proceedings of 2nd International Conference on Computational Plasticity, p. 163.
64. Teodosiu, C., Hu, Z., 1995. Evolution of the intragranular microstructure at moderate and large strains: modelling and computational significance. In: Shen, S., Dawson, P.R. (Eds.), Proceedings of the Numiform'95 on Simulation of Materials Processing: Theory, Methods and Applications. Balkema, Rotterdam, pp. 173-182.
65. Teodosiu, C., Hu, Z., 1998. Microstructure in the continuum modelling of plastic anisotropy. In: Riso National Laboratory (Eds.), Proceedings of the 19th Riso International Symposium on Materials Science: Modelling of Structure and Mechanics of Materials from Microscale to Products, pp. 149-168.
66. Uenishi, A., Teodosiu, C., 2004. Constitutive modelling of the high strain rate behaviour of interstitial-free steel. Int. J. Plasticity 20 (4-5), 915-936.
67. Wang, J., Wagoner, R.H., 2005. A practical large-strain solid finite element for sheet forming. Int. J. Numer. Meth. Eng. 63 (4), 473-501.
68. Wang, C., Kinzel, G., Altan, T., 1993. Mathematical modeling of plane-strain bending of sheet and plate. J. Mater. Process. Technol. 39 (3-4), 279-304.
69. Yamada, Y., Yoshimur, N., Sakurai, T., 1968. Plastic stress-strain matrix and its application for the solution of elastic-plastic problems by the finite element method. Int. J. Mech. Sci. 10 (5), 348-354.
70. Yang, M., Akiyama, Y., Sasaki, T., 2004. Evaluation of change in material properties due to plastic deformation. J. Mater. Process. Technol. 151 (1-3), 232-236.
71. Yoshida, F., Uemori, T., 2003. A model of large-strain cyclic plasticity and its application to springback simulation. Int. J. Mech. Sci. 45 (10), 1687-1702.
72. Zhao, K.M., Lee, J.K., 2002. Finite element analysis of the three-point bending of sheet metals. J. Mater. Process. Technol. 122 (1), 6-11.