A review of cryogenic cooling in machining processes

International Journal of Machine Tools and Manufacture

Volumn 48, Issue 9, 2008, Pages 947-964

  Yildiz, Yakup ^a   Nalbant, Muammer ^a  

^a GAZI UNIVERSITY   (Turkey)

Author keywords

Cryogenic cooling; Liquid nitrogen; Machining processes; Surface roughness; Tool life

Indexed keywords

COOLING; LIQUID NITROGEN; MACHINING; WEAR OF MATERIALS;

CRYOGENIC COOLING; MACHINING PROCESSES;

CRYOGENICS;

EID: 43049099255     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2008.01.008     Document Type: Review

References (96)

1. Kitagawa T., and Maekawa K. Plasma hot machining for new engineering materials. Wear 139 (1990) 251-267
2. Ezugwu E.O., Machado A.R., Pashby I.R., and Wallbank J. The effect of high-pressure coolant supply when machining a heat-resistant nickel-based superalloy. Lubrication Engineering 47 9 (1991) 751-757
3. Rahman M., Kumar A.S., and Salam M.U. Evaluation of minimal quantities of lubricant in end milling. International Journal of Advanced Manufacturing Technology 18 (2001) 235-241
4. El Baradie M.A. Cutting fluids: Part I. Characterisation. Journal of Materials Processing Technology 56 1-4 (1996) 786-797
5. Shaw M.C. Metal Cutting Principles (1986), Oxford University Press, Oxford
6. Adler D.P., Hii W.S., Michalek D.J., and Sutherland J.W. Examining the role of cutting fluids in machining and efforts to address associated environmental/health concerns. Machining Science and Technology 10 (2006) 23-58
7. W.A. Carter, Metal Machining, Part VI, Cutting Fluids, Machinery Lloyd, Overseas Edition, 1956.
8. Seah K.H.W., Li X., and Lee K.S. The effect of applying coolant on tool wear in metal machining. Journal of Materials Processing Technology 48 1-4 (1995) 495-501
9. Diniz A.E., and Micaroni R. Cutting conditions for finish turning process aiming: the use of dry cutting. International Journal of Machine Tools and Manufacture 42 (2002) 899-904
10. El Baradie M.A. Cutting fluids: Part II. Recycling and clean machining. Journal of Materials Processing Technology 56 1-4 (1996) 798-806
11. Cutting Fluid Health Hazards, 〈http://www.mfg.mtu.edu/cyber-man/index.html〉, 2004.
12. 〈http://www.tuik.gov.tr〉, 2007.
13. Uehara K., and Kumagai S. Chip formation, surface roughness and cutting force in cryogenic machining. Annals of CIRP 17 1 (1969) 409-416
14. Uehara K., and Kumagai S. Characteristics of tool wear in cryogenic machining. Annals of CIRP 18 1 (1970) 273-277
15. Hong S.Y. Economical and ecological cryogenic machining. Journal of Manufacturing Science and Engineering 123 2 (2001) 331-338
16. Chattopadhyay A.B., Bose A., and Chattopdhyay A.K. Improvements in grinding steels by cryogenic cooling. Precision Engineering 7 2 (1985) 93-98
17. Paul S., and Chattopadhyay A.B. Effects of cryogenic cooling by liquid nitrogen jet on forces, temperature and surface residual stresses in grinding. Cryogenics 35 8 (1995) 515-523
18. Paul S., and Chattopadhyay A.B. The effect of cryogenic cooling on grinding forces. International Journal of Machine Tools and Manufacture 36 1 (1996) 63-72
19. Paul S., and Chattopadhyay A.B. Environmentally conscious machining and grinding with cryogenic with cryogenic cooling. Machining Science and Technology 10 (2006) 87-131
20. M. Ahmed, Cryogenic drilling of Kevlar composite laminated, Master of Science in Mechanical Engineering, King Fahd University of Petroleum and Minerals, 2004.
21. Gruman Aircraft Engineering, Cryogenic coolants speed titanium machining, Machinery, July (1965) 101-102.
22. Fillipi A.D., and Ippolite R. Facing milling at -180 °C. Annals of CIRP 19 1 (1971) 399-406
23. Yu S., Ning H., Liang L., Xinlong L., and Wei Z. Effects of cryogenic nitrogen gas jet on machinability of Ti-alloy in high speed milling. China Mechanical Engineering 17 11 (2006) 1183-1187
24. S.Y. Hong, X. Qu, A. Lee, Economical cryogenic milling for environmentally safe manufacturing, Technical Paper-Society of Manufacturing Engineers, in: Proceedings of the NAMRXXXVI Conference, May, Atlanta, USA, 1998.
25. S.Y. Hong, Milling tool with rotary cryogenic coolant coupling, Patent Cooperation Treaty (PCT), WO 99/60079 (1999).
26. 〈http://en.wikipedia.org/wiki/Cryogenic〉, 2007.
27. 〈http://encarta.msn.com/encyclopedia_761563758/Cryogenics.html〉, 2007.
28. Hong S.Y., and Zhao Z. Thermal aspects, material considerations and cooling strategies in cryogenic machining. Clean Products and Processes 1 (1999) 107-116
29. Silva M.B., and Wallbank J. Cutting temperature: prediction and measurement methods-a review. Journal of Materials Processing Technology 88 (1999) 195-202
30. O'Sullivan D., and Cotterell M. Temperature measurement in single point turning. Journal of Materials Processing Technology 118 (2001) 301-308
31. Abukhshim N.A., Mativenga P.T., and Sheikh M.A. Heat generation and temperature prediction in metal cutting: a review and implications for high speed machining. International Journal of Machine Tools and Manufacture 46 (2006) 782-800
32. Majumdar P., Jayaramachandran R., and Ganesan S. Finite element analysis of temperature rise in metal cutting processes. Applied Thermal Engineering 25 (2005) 2152-2168
33. Ng E.G., Aspinwall D.K., Brazil D., and Monaghan J. Modelling of temperature and forces when orthogonally machining hardened steel. International Journal of Machine Tools and Manufacture 39 (1999) 885-903
34. Groover M.P., and Kane G.E. A continuing study in the determination of temperatures in metals cutting using remote thermocouples. Transactions of the ASME, Journal of Engineering Industry (1971) 603-608
35. Komanduri R., and Hou Z.B. Thermal modelling of the metal cutting process-Part III: Temperature rise distribution due to the combined effects of shear plane heat source and the tool-chip interface frictional heat source. International Journal of Mechanical Sciences 43 (2001) 89-107
36. Ay H., and Yang W.J. Heat transfer and life of metal cutting tools in turning. International Journal of Heat Mass Transfer 41 3 (1998) 613-623
37. Chou Y.K., and Evans C.J. Tool wear mechanism in continuous cutting of hardened tool steels. Wear 212 (1997) 59-65
38. Gu J., Barber G., Tung S., and Gu R.J. Tool life and wear mechanism of uncoated and coated milling inserts. Wear 225-229 (1999) 273-284
39. Groover M.P. Fundementals of Modern Manufacturing, Materials, Processes, and Systems (1996), Prentice-Hall Inc., Upper Saddle River, NJ p. 569
40. Liu Z.Q., Ai X., Zhang H., Wang Z.T., and Wan Y. Wear patterns and mechanisms of cutting tools in high-speed face milling. Journal of Materials Processing Technology 129 (2002) 222-226
41. Casto S.L., Valvo E.L., Lucchini E., Maschio S., and Russi V.F. Wear rates and wear mechanisms of alumina-based tools cutting steel at a low cutting speed. Wear 208 (1997) 67-72
42. Wang Z.Y., and Petrescu G. Stress analyses of CBN insert in hybrid machining of RBSN ceramic. Machining Science and Technology 8 1 (2004) 1-19
43. Li J., Yuan Z., and Zhou M. Cryogenic ultra-precision machining of ferrous metals with natural diamond tools. Chinese Journal of Mechanical Engineering 25 1 (1989) 69-72
44. Evans C. Cryogenic diamond turning of stainless steel. CIRP Annals 40 1 (1991) 571-575
45. R. Ghosh, Z. Zurecki, J.H. Frey, Cryogenic machining with brittle tools and effects on tool life, in: ASME, International Mechanical Engineering Congress, Washington, November 2003, pp. 201-209.
46. Hong S.Y., and Ding Y. Micro-temperature manipulation in cryogenic machining of low carbon steel. Journal of Materials Processing Technology 116 (2001) 22-30
47. Jawahir I.S. The chip control factor in machinability assessments: recent trends. Journal of Mechanical Working Technology 17 (1988) 213-224
48. Bhattacharyya D., Allen M.N., and Mander S.J. Cryogenic machining of Kevlar composites. Materials and Manufacturing Processes 8 6 (1993) 631-651
49. S.Y. Hong, Y. Ding, Manipulating machining temperature for chip breaking improvement, in: ASME, International Symposium on Information Storage and Processing Systems, Atlanta, 1996, pp. 395-402.
50. Hong S.Y., Ding Y., and Ekkens R.G. Improving low carbon steel chip breakability by cryogenic chip cooling. International Journal of Machine Tools and Manufacture 39 (1999) 1065-1085
51. Ahmed M.I., Ismail A.F., Abakr Y.A., and Amin A.K.M.N. Effectiveness of cryogenic machining with modified tool holder. Journal of Materials Processing Technology 185 (2007) 91-96
52. Hong S.Y., Markus I., and Jeong W. New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V. International Journal of Machine Tools and Manufacture 41 (2001) 2245-2260
53. Hong S.Y., and Ding Y. Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V. International Journal of Machine Tools and Manufacture 41 (2001) 1417-1437
54. 4). Wear 195 1-2 (1996) 1-6
55. Wang Z.Y., and Rajurkar K.P. Wear of CBN tool in turning of silicon nitride with cryogenic cooling. International Journal of Machine Tools and Manufacture 37 3 (1997) 319-326
56. Wang Z.Y., and Rajurkar K.P. Cryogenic machining of hard-to-cut materials. Wear 239 (2000) 168-175
57. Z. Zurecki, R. Ghosh, J.H. Frey, Finish-turning of hardened powder-metallurgy steel using cryogenic cooling, in: Proceedings of the International Conference on Powder Metallurgy and Particulate Materials, Las Vegas, June 2003.
58. K.V.B.S.K. Kumar, S.K. Choudhury, Investigation of tool wear and cutting force in cryogenic machining using design of experiments, Journal of Materials Processing Technology, in press, doi:10.1016/j.jmatprotec.2007.10.036.
59. S.Y. Hong, Cryogenic Machining US Patent No. 5901623 (1999).
60. Hong S.Y., and Broomer M. Economical and ecological cryogenic machining of AISI 304 austenitic stainless steel. Clean Products and Processes 2 (2000) 157-166
61. Dhar N.R., Paul S., and Chattopadhyay A.B. Role of cryogenic cooling on cutting temperature in turning steel. Transactions of the ASME 124 (2002) 146-154
62. Dhar N.R., Paul S., and Chattopadhyay A.B. The influence of cryogenic cooling on tool wear, dimensional accuracy and surface finish in turning AISI 1040 and E4340C steels. Wear 249 (2002) 932-942
63. Dhar N.R., and Kamruzzaman M. Cutting temperature, tool wear, surface roughness and dimensional deviation in turning AISI-4037 steel under cryogenic condition. International Journal of Machine Tools and Manufacture 47 (2007) 754-759
64. Venugopal K.A., Paul S., and Chattopadhyay A.B. Tool wear in cryogenic turning of Ti-6Al-4V alloy. Cryogenics 47 (2007) 12-18
65. Hong S.Y., Ding Y., and Jeong W.-C. Friction and cutting forces in cryogenic machining. International Journal of Machine Tools and Manufacture 41 (2001) 2271-2285
66. S. Hong, Advancement of economical cryogenic machining technology, in: Proceedings of Third International Conference on Manufacturing Technology, Hong Kong, 1995, pp. 168-173.
67. Barron R.F. Cryogenic treatment of metals to improve wear resistance. Cryogenics 22 8 (1982) 409-413
68. Lal D.M., Renganarayanan S., and Kalanidhi A. Cryogenic treatment to augment wear resistance of tool and die steels. Cryogenics 41 (2001) 149-155
69. Yong A.Y.L., Seah K.H.W., and Rahman M. Performance evaluation of cryogenically treated tungsten carbide tools in turning. International Journal of Machine Tools and Manufacture 46 (2006) 2051-2056
70. Silva F.J., Franco S.D., Machado A.R., Ezugwu E.O., and Souza A.M. Performance of cryogenically treated HSS tools. Wear 261 (2006) 674-685
71. Dreger D.R. Promise of cryogenic processing. Machine Design 53 2 (1981) 73-78
72. Zhao Z., and Hong S.Y. Cryogenic properties of some cutting tool materials. Journal of Materials Engineering and Performance 1 5 (1992) 705-714
73. Molinari A., Pellizzari M., Gialanella S., Straffelini G., and Stiasny K.H. Effect of deep cryogenic treatment on the mechanical properties of tool steels. Journal of Materials Processing Technology 118 (2001) 350-355
74. Zhao Z., and Hong S.Y. Cooling strategies for cryogenic machining from a materials viewpoint. Journal of Materials Engineering and Performance 1 5 (1992) 669-678
75. Ding Y., and Hong S.Y. Improvement in chip breaking in machining a low carbon steel by cryogenically precooling the workpiece. Transactions of the ASME, Journal of Manufacturing Science and Engineering 120 1 (1997) 76-83
76. Dhar N.R., Paul S., and Chattopadhyay A.B. Machining of AISI 4140 steel under cryogenic cooling-tool wear, surface roughness and dimensional deviation. Journal of Materials Processing Technology 123 (2002) 483-489
77. Ding Y., and Hong S.Y. A study of the cutting temperatures in machining processes cooled by liquid nitrogen. Technical Papers of NAMRI (1995) 114-119
78. Zhao H., Barber G.C., and Zou Q. A study of flank wear in orthogonal cutting with internal cooling. Wear 253 (2002) 957-962
79. Khan A.A., and Ahmed M.I. Improving tool life using cryogenic cooling. Journal of Materials Processing Technology 196 1-3 (2008) 149-154
80. Ghosh R. Interrupted hard turning with cryogenically cooled ceramic tools. Transactions of the North American Manufacturing Research Institute of SME 33 (2005) 161-169
81. Wang Z.Y., Rajurkar K.P., Fan J., Lei S., Shin Y.C., and Petrescu G. Hybrid machining of Inconel 718. International Journal of Machine Tools and Manufacture 43 (2003) 1391-1396
82. Zurecki Z., Harriott G., and Zhang X. Dry machining of metals with liquid nitrogen. 3rd International Machining and Grinding SME (1999) 1-12
83. Paul S., Dhar N.R., and Chattopadhyay A.B. Beneficial effects of cryogenic cooling over dry and wet machining on tool wear and surface finish in turning AISI 1060 steel. Journal of Materials Processing Technology 116 (2001) 44-48
84. Dhar N.R., Islam S., Kamruzzaman Md., and Paul S. Wear behavior of uncoated carbide inserts under dry, wet and cryogenic cooling conditions in turning C-60 steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering 28 2 (2006) 146-152
85. 2-coated carbides under cryogenic cooling. Journal of Engineering Manufacture 217 12 (2003) 1697-1707
86. Yong A.Y.L., Seah K.H.W., and Rahman M. Performance of cryogenically treated tungsten carbide tools in milling operations. International Journal of Advanced Manufacturing Technology 32 (2007) 638-643
87. Chatterjee S. Performance characteristics of cryogenically treated high speed steel drills. International Journal of Production Research 30 4 (1992) 773-786
88. Kim D., and Ramulu M. Cryogenically treated carbide tool performance in drilling thermoplastic composites. Transactions of the North American Manufacturing Research Institute of SME 32 (2004) 79-85
89. Stewart H.A. Cryogenic treatment of tungsten carbide reduces tool wear when machining medium density fibreboard. Forest Products Journal 54 2 (2004) 53-56
90. Stephenson D.A., and Agapiou J.S. Metal Cutting Theory and Practice. second ed. (2006), Taylor & Francis, CRC Press, Boca Raton pp. 551-559
91. Risbood K.A., Dixit U.S., and Sahasrabudhe A.D. Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process. Journal of Materials Processing Technology 132 (2003) 203-214
92. Azouzi R., and Guillot M. On-line prediction of surface finish and dimensional deviation in turning using neural network based sensor fusion. International Journal of Machine Tools and Manufacture 37 9 (1997) 1201-1217
93. N.R. Dhar, S. Paul, A.B. Chattopadhyay, On effect of cryogenic cooling on tool wear and job dimension and finish in turning Ni-Cr steel, in: ICM 2000, Dhaka, Bangladesh, 24-26 February 2000, pp. 301-310.
94. Hong S.Y. Lubrication mechanisms of LN2 in ecological cryogenic machining. Machining Science and Technology 10 (2006) 133-155
95. Hong S.Y., Ding Y., and Jeong J. Experimental evaluation of friction coefficient and liquid nitrogen lubrication effect in cryogenic machining. Machining Science and Technology 6 2 (2002) 235-250
96. Dhar N.R., Nanda K.S.V., Paul S., and Chattopadhyay A.B. The effects of cryogenic cooling on chips and cutting forces in turning AISI 1040 and AISI 4320 steels. Journal of Engineering Manufacture 216 5 (2002) 713-724