An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4V

Wear

Volumn 261, Issue 7-8, 2006, Pages 760-766

  Su, Y ^a   He, N ^a   Li, L ^a   Li, X L ^a  

^a NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS   (China)

Author keywords

High speed end milling; Ti 6Al 4V; Tool wear

Indexed keywords

ALUMINUM; COOLING; FATIGUE OF MATERIALS; METAL CUTTING; MILLING (MACHINING); SCANNING ELECTRON MICROSCOPY; WEAR OF MATERIALS;

HIGH SPEED END MILLING; THERMAL FATIGUE; TI-6AL-4V; TOOL WEAR;

TITANIUM ALLOYS;

ALUMINUM; COOLING; FATIGUE OF MATERIALS; METAL CUTTING; MILLING (MACHINING); SCANNING ELECTRON MICROSCOPY; TITANIUM ALLOYS; WEAR OF MATERIALS;

EID: 33748745206     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2006.01.013     Document Type: Article

References (39)

1. Hong H., Riga A.T., Cahoon J.M., and Scott C.G. Machinability of steels and titanium alloys under lubrication. Wear 162 (1993) 34-39
2. Kitagawa T., Kubo A., and Maekawa K. Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti-6Al-6V-2Sn. Wear 202 2 (1997) 142-148
3. www.coromant.sandvik.com
4. Schulz H., and Moriwaki T. High-speed machining. Ann. CIRP 41 2 (1992) 637-645
5. Ashley S. High-speed machining goes mainstream. Mech. Eng. 117 5 (1995) 56-61
6. Tlusty J. Manufacturing Processes and Equipment (1999), Prentice Hall
7. Ezugwu E.O., and Wang Z.M. Titanium alloys and their machininability-a review. J. Mater. Process. Technol. 68 3 (1997) 262-274
8. Sreejith P.S., and Ngoi B.K.A. Dry machining: machining the future. J. Mater. Process. Technol. 101 1 (2000) 287-291
9. Byrne G., and Scholta E. Environmentally clean machining processes-a strategic approach. Ann. CIRP 42 1 (1993) 471-474
10. Sokovic M., and Mijanovic K. Ecological aspects of the cutting fluids and its influence on quantifiable parameters of the cutting processes. J. Mater. Process. Technol. 109 1-2 (2001) 181-189
11. Klocke F. Dry cutting. Ann. CIRP 46 2 (1997) 519-526
12. Hong S.Y., Markus I., and Jeong W.-C. New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V. Int. J. Machine Tools Manufacture 41 15 (2001) 2245-2260
13. Wang Z.Y., Rajurkar K.P., and Fan J. Turning Ti-6Al-4V with cryogenic cooling. Trans. NAMRI SME 24 (1996) 3-8
14. Kovacevic R., Cherukuthota C., and Mazurkiewiez M. High pressure waterjet cooling/lubrication to improve machining efficiency in milling. Int. J. Machine Tools Manufacture 35 10 (1995) 1459-1473
15. Z.L. Man, Study on the high speed milling of Ti-alloy based on the green manufacturing, Ph.D. thesis, Nanjing University of Aeronautics and Astronautics, China, 2003 (in Chinese).
16. Yamazaki T., Miki K., and Sato U. Cooling air cutting of Ti-6Al-4V alloy. J. Jpn. Inst. Light Metals 53 10 (2003) 416-420 (in Japanese)
17. Yokogawa K., Yokogawa M., and Okumura S. Cooling air grinding and cutting technology. Tool Eng. 42 7 (1998) 57-62 (in Japanese)
18. Hartung P.D., and Kramer B.M. Tool wear in titanium machining. Ann. CIRP 31 1 (1982) 75-80
19. Dearnley P.A., and Grearson A.N. Evaluation of principal wear mechanisms of cemented carbides and ceramics used for machining titanium alloy, IMI 318. Mater. Sci. Technol. 2 (1986) 47-58
20. Wang M., and Zhang Y.Z. Diffusion wear in milling titanium alloys. Mater. Sci. Technol. 4 (1988) 548-553
21. Jawaid A., Che-haron C.H., and Abdullah A. Tool wear characteristics in turing of titanium alloy Ti-6246. J. Mater. Process. Technol. 92-93 (1999) 329-334
22. Jawaid A., Sharif S., and Koksal S. Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy. J. Mater. Process. Technol. 99 (2000) 266-274
23. Narutaki N., Murakoshi A., and Motonishi S. Study on machining of titanium alloys. Ann. CIRP 32 1 (1983) 65-69
24. Bhaumik S.K., Divakar C., and Singh A.K. Machining Ti-6Al-4V alloy with a wBN-cBN composite tool. Mater. Des. 16 4 (1995) 221-226
25. Zoya Z.A., and Krishnamurthy R. The performance of CBN tools in the machining of titanium alloys. J. Mater. Process. Technol. 100 (2000) 80-86
26. Brookes C.A., James R.D., and Nabhani F. Turning aerospace titanium alloys. IDR 36 (1991) 89-893
27. Corduan N., Himbert T., Poulachon G., Dessoly M., Lambertin M., Vigneau J., and Payoux B. Wear mechanisms of new tool materials for Ti-6Al-4V high performance machining. Ann. CIRP 52 1 (2003) 73-76
28. Wang Z.G., Rahman M., and Wong Y.S. Tool wear characteristics of binderless CBN tools used in high-speed milling of titanium alloys. Wear 258 (2005) 752-758
29. He N., Li L., and Li X.L. A new cooling nitrogen gas generator and experiments of high speed milling of Ti alloy. Mater. Sci. Forum 471-472 (2004) 140-143
30. Stanford M., and Lister P.M. Investigation into the relationship between tool-wear and cutting environments when turning EN32 steel. Ind. Lubr. Tribol. 56 2 (2004) 114-121
31. Hong S.Y., and Ding Y. Cooling approaches and cutting temperatures in cryogenic machining of Ti-6Al-4V. Int. J. Machine Tools Manufacture 41 10 (2001) 1417-1437
32. X.Q. Zhang, K. Yamazaki, Y. Yamaguchi, A study on a novel tool temperature measurement method in high-speed machining of titanium, Proceedings of the 17th Annual Meeting of the American Society for Precision Engineering, St. Louis, MO, 2002, pp. 425-428.
33. Che-haron C.H. Tool life and surface integrity in turning titanium alloy. J. Mater. Process. Technol. 118 (2001) 231-237
34. Ezugwu E.O., Wang Z.M., and Machado A.R. Wear of coated carbide tools when machining nickel (Inconel 718) and titanium base (Ti-6Al-4V) alloys. Tribol. Trans. 43 2 (2000) 263-268
35. Vieira J.M., Machado A.R., and Ezugwu E.O. Performance of cutting fluids during face milling of steels. J. Mater. Process. Technol. 116 2-3 (2001) 244-251
36. Liu N., Xu G.Y., and Xu Y.D. Thermal shock fatigue behaviors of cemented carbide YG20. Trans. Nonferrous Metals Soc. China 7 2 (1997) 149-154 (English edition)
37. M. Wang, Studies on tool wear in milling of titanium alloys, Ph.D. thesis, Nanjing University of Aeronautics and Astronautics, China, 1985 (in Chinese).
38. Numora T., Moriguchi H., Tsuda K., et al. Material design method for the functionality graded cemented carbide tool. Int. J. Refractory Metals Hard Mater. 17 6 (1999) 397-404
39. Uehara K. Fundamental approach to the thermal crack of cermet cutting tools. Ann. CIRP 30 1 (1981) 47-51