The effect of an embedded heat pipe in a cutting tool on temperature and wear

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD

Volumn 374, Issue 3, 2003, Pages 369-376

  Chiou, Richard Y ^a   Chen, Jim S J ^b   Lu, Lin ^b   North, Mark T ^c  

^a DREXEL UNIVERSITY   (United States)

^b Temple University   (United States)

^c Aavid Thermacore Europe Ltd   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; CONTAMINATION; CUTTING TOOLS; DATA ACQUISITION; FINITE ELEMENT METHOD; HEAT LOSSES; MACHINING; MATHEMATICAL MODELS; TEMPERATURE DISTRIBUTION; WEAR OF MATERIALS;

EMBEDDED HEAT PIPES; HEAT GENERATION;

HEAT PIPES;

EID: 1842533905     PISSN: 02725673     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2003-55464     Document Type: Conference Paper

References (39)

1. Ay, H., "Heat Transfer and Life of Metal Cutting Tools in Turning," Int. J. Heat Mass Transfer, Vol. 41, No. 3, pp. 613-623, 1998.
2. Balaji, A. K., Sreeram, G., Jawahir, I. S., and Lenz, E., 1999, "The Effect of Cutting Tool Thermal Conductivity on Tool-Chip, Contact Length and Cyclic Chip Formation in Machining with Grooved Tools," Annals of the CIRP, Vol. 48/1, pp. 33-38.
3. Beaubien, S. J., and Cattaneo, A.G., 1964, "A Study of the Role of Cutting Fluid in Machining Operations," Lub. Eng., 10 (April), pp. 74-79.
4. Bishop, K. E., Lype, E.F., and Raynor, S., 1950, "The Role of Cutting Fluid as a Lubricant," Lub. Eng., 6 (April), pp. 70-3.
5. Byrne, G., and Scholta, E., 1993, "Environmentally Clean Machining Processes - A Strategic Approach," Annals of CIRP, pp. 471-474.
6. Cao, Y. and Faghri, A., 1994, "Micro/Miniature Heat Pipes and Operating Limitations," J. Enhanced Heat Transfer, Vol. 1, No. 3, pp 265-274.
7. Chao, B. T., and Trigger, K.J., 1958, "Temperature Distribution at Tool-Chip and Tool-Work Interface in Metal Cutting," Trans. ASME, Feb., pp. 311-320.
8. Chandrasekaran, H. and Thuvander, A., 1998, "Modeling tool stresses and temperature evaluation in turning using finite element method," Machining science and technology, 2(2), pp. 355-367.
9. Chiou, R. Y., Chen, Jim S-J., Cooper, D., and Ciuciu, C., 2000, "Environmentally Conscious Investigation of Cutting Fluid Mist Behavior via Particle Image Velocimetry in Turning," ASME International Mechanical Engineering Conference and Exposition, Vol. 11, pp. 829-834.
10. Chiou, Y. S., Chung, E. S., and Liang, S. Y., "Analysis of Tool Wear Effect on Chatter Stability in Turning," Int. J. Mech. Sci. Vol. 37, No. 4, pp. 391-404, 1995.
11. Chen, Z., Wong, Kineah, L., Wei, S., David A., and Liang, S. Y., 1999, "Cutting Fluid Aerosol Generation Due To Spin-Off in Turning Operation: Analysis for Environmentally Conscious Machining," ASME International Mechanical Engineering Conference and Exposition, Manufacturing Science and Engineering (ASME), MED-Vol. 10, pp. 285-291.
12. Dan, L., and Mathew, J., "Tool Wear and Failure Monitoring Techniques for Turning - A review," Int. J. Mech. Sci. Vol. 30, No. 4, pp. 579-598, 1990.
13. De Chiffre, L., "Function of Cutting Fluids in Machining, 1988," Lubrication Engineering, June, Vol. 44, 6, pp. 514-518.
14. Ding, Y., and Hong, S. Y., "Improvement of Chip Breaking in Machining Low Carbon Steel by Cryogenically Precooling the Workpiece," Journal of Manufacturing Science and Engineering, Vol. 120, pp. 76-83, Feburary 1998.
15. Erdel, B. P., 1999, "Environmental Issues in Machining," SME Machining Technology, Vol. 10, No. 4, Fourth Quarter.
16. Faghri, A., 1995, Heat pipe science and technology, Taylor and Francis.
17. Graham, D., 2000, "Dry Machining," Manufacturing Engineering, January, Vol. 121, No. 1, pp. 72-78.
18. Jen, T. C. and Anagonye, A. U., 2001, "An Improved Transient Model of Tool Temperatures in Metal Cutting," Tansactions of ASME, Journal of Manufacturing Science and Engineering, Vol. 123, February.
19. Jen, T.C., Gutierrez, G., Eapen S., Barber, G., Zhao, H., Szuba, S., Manjunathaiah, J., and Labataille, J., 2002, "Investigation of Heat Pipes Cooling in Drilling Applications Part I: Preliminary Numerical Analysis and Verifications" International Journal of Machine Tool and Manufacture, Vol. 42, pp. 643-652.
20. Judd, R. L., Aftab, K., and Elbestawi, M.A., 1994, "An Investigation of the Use of Heat Pipes for Machine Tool Spindle Bearing Cooling," Int. J. of Mach. Tools and Manufact., Vol. 34, No. 7, pp. 1031-1043.
21. Jawahir, I. S., and Van Luttervelt, C. A., "Recent Developments in Chip Control Research and Applications," Annals of the CIRP, Vol. 42, No. 2, pp. 659-693, 1993.
22. th ed., Prentice-Hall.
23. th Proceedings of the North American Manufacturing Research Conference, pp. 463-468, 1987.
24. Liang, S. Y. and Dornfeld, D. A., "Tool Wear Detection Using Time Series Analysis of Acoustic Emission," ASME J. of Engineering for Industry, Vol. 111, pp 199-205, 1989.
25. Lu, Lin, "Investigation of Embedded Heat Pipe in Cutting Tools for Dry Machining," Master Thesis, Temple University, August, 2003.
26. Loewen, E.G. and Shaw, M.C., 1954, "On the Analysis of Cutting-Tool Temperatures," Transactions of ASME, Vol. 76, February, pp. 217-31.
27. Maekawa, K., Nakano, Y., and Kitagawa, T., 1996, "Finite element analysis of thermal behavior in metal machining," JSME International Journal, Series C, Vol. 39, No. 4, pp. 864-869.
28. Merchant, M. E., 1945, "Mechanics of the Metal Cutting Process, I-Orthogonal Cutting and a Type 2 Chip," Journal of Applied Physics, Vol. 16, No. 5 (May), pp. 267-275.
29. Olson, W. W. and Sutherland, J. W., 1994, "Environmentally Conscious Manufacturing," Proceedings of the Japan-USA Symposium on Flexible Automation.
30. Peterson, G. P., 1999, "Chapter 12 - Heat Pipes," McGraw-Hill Handbook of Heat Transfer 3rd edition, W. M. Rohnsenow, J. P. Hartnett and Y. I. Cho, (eds.), McGraw-Hill Publishing Co., Washington D.C.
31. Radulescu, R. and Kapoor, S.G., 1994, "An Analytical Model for Prediction of Tool Temperature Fields during Continuous and Interrupted Cutting," Transactions of the ASME, Journal of Engineering for Industry, Vol. 116, pp. 135-143.
32. Sreejith, P.S. and Ngoi, B. K. A., 2000, "Dry machining: machining of the future," Journal of Materials Processing Technology, Vol. 101, pp.287-291.
33. Sugishita, H., Nishiyama, H., Nagayasu, O., Sato, H. and O-Hori, M., 1988, "Development of concrete machining center and identification of the dynamic and the thermal structural behavior," Annals of the CIRP, Vol.37, pp. 377-380.
34. Stephenson, D. A., and Ali, A., 1992, "Tool Temperatures in Interrupted Metal Cutting," Journal of Engineering for Industry, Vol. 114, May, pp. 127-135.
35. Stephenson, D. A., Jen, T. C., and Lavine, A. S., 1997, "Cutting Tool Temperatures in Contour Turning: Transient analysis and Experimental Verification," ASME Transactions Journal of Manufacturing Science and Engineering, Vol. 119, pp. 494-501, November.
36. Chu, T. H., Wallbank, J., 1998, "Determination of the temperature of a machined surface," J. Manuf. Sci. Eng. Vol. 120, pp.259-263.
37. Tay, A.O., Stevenson, M.G., and Davis, G. de Vahl, 1974, "Using the Finite Element Method to Determine Temperature Distributions in Orthogonal Machining," Procedures of the Institution of Mechanical Engineers, Vol. 188, pp. 627-638.
38. Usui, E., Shirakashi, T. and Kitagawa, T., 1978, "Analytical Prediction of Three-Dimensional Cutting Process Part 3: Cutting Temperature and Crater Wear of Carbide Tool," ASME Journal of Engineering for Industry, Vol.100, pp.236-243.
39. Yen, Y. C., Sohner, W., Schmidt J., and Atlan, T., "Estimation of Tool Wear of Carbide Tool in Orthogonal Cutting Using FEM Simulation," Proc. CIRP International Workshop on Modeling of Machining Operations, West Lafayette, IN, USA, May, 20-21, 2002.