Investigation of dry machining with embedded heat pipe cooling by finite element analysis and experiments

International Journal of Advanced Manufacturing Technology

Volumn 31, Issue 9-10, 2007, Pages 905-914

  Chiou, Richard Y ^a   Lu, Lin ^a   Chen, Jim S J ^b   North, Mark T ^c  

^a DREXEL UNIVERSITY   (United States)

^b Temple University   (United States)

^c Aavid Thermacore Europe Ltd   (United States)

Author keywords

Dry machining; Heat pipe; Heat transfer; Temperature; Tool design; Wear

Indexed keywords

COOLING; CUTTING FLUIDS; FINITE ELEMENT METHOD; HEAT PIPES; HEAT TRANSFER; MACHINE DESIGN; MACHINING;

CUTTING TEMPERATURE; DRY MACHINING; HEAT PIPE TECHNOLOGY; TOOL DESIGN;

CUTTING TOOLS;

EID: 33846230132     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-005-0266-8     Document Type: Article

References (37)

1. Ay H, Yang W-J (1998) Heat transfer and life of metal cutting tools in turning. Int J Heat Mass Trans 41(3):613-623
2. Balaji AK, Sreeram G, Jawahir IS, Lenz E (1999) The effect of cutting tool thermal conductivity on tool-chip contact length and cyclic chip formation in machining with grooved tools. Annals CIRP 48(1):33-38
3. Beaubien SJ, Cattaneo AG (1964) A study of the role of cutting fluid in machining operations. Lubr Eng 10:74-79
4. Bishop KE, Lype EF, Raynor S (1950) The role of cutting fluid as a lubricant. Lubr Eng 6:70-73
5. Byrne G, Scholta E (1993) Environmentally clean machining processes - a strategic approach. Annals CIRP 42(1):471-474
6. Cao Y, Faghri A (1994) Micro/miniature heat pipes and operating limitations. J Enhanced Heat Trans 1(3):265-274
7. Chao BT, Trigger KJ (1958) Temperature distribution at tool-chip and tool-work interface in metal cutting. Trans ASME 80:311-320
8. Chandrasekaran H, Thuvander A (1998) Modeling tool stresses and temperature evaluation in turning using finite element method. Mach Sci Technol 2(2):355-367
9. Chiou RY, Chen JSJ, Cooper D, Ciuciu C (2000) Environmentally conscious investigation of cutting fluid mist behavior via particle image velocimetry in turning. In: Proceedings of the 2000 ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, November 2000, vol 11, pp 829-834
10. Chiou RY, Chen JSJ, Lu L, Cole I (2002) Prediction of heat transfer behavior of carbide inserts with embedded heat pipes for dry machining. In: Proceedings of the 2002 ASME International Mechanical Engineering Congress & Exposition, New Orleans, Louisiana, November 2002, pp 17-22
11. Chen Z, Wong K, Li Wei, Stephenson DA, Liang SY (1999) Cutting fluid aerosol generation due to spin-off in turning operation: analysis for environmentally conscious machining. In: Proceedings of the ASME International Mechanical Engineering Conference and Exposition, Manufacturing Science and Engineering, Nashville, Tennessee, November 1999, MED-vol 10, pp 285-291
12. Chu TH, Wallbank J (1998) Determination of the temperature of a machined surface. J Manuf Sci Eng 120:259-263
13. De Chiffre L (1988) Function of cutting fluids in machining. Lubr Eng 44(6):514-518
14. Ding Y, Hong SY (1998) Improvement of chip breaking in machining low carbon steel by cryogenically precooling the workpiece. J Manuf Sci Eng - Trans ASME 120:76-83
15. Erdel BP (1999) Environmental issues in machining. SME Machining Technology, vol 10, no 4, 4th quarter
16. Faghri A (1995) Heat pipe science and technology. Taylor and Francis, Washington, DC
17. Graham D (2000) Dry machining. Manuf Eng 121(1):72-78
18. Jen TC, Anagonye AU (2001) An improved transient model of tool temperatures in metal cutting. J Manuf Sci Eng - Trans ASME 123(1):30-37
19. Jen TC, Gutierrez G, Eapen S, Barber G, Zhao H, Szuba S, Manjunathaiah J, Labataille J (2002) Investigation of heat pipes cooling in drilling applications. Part I: preliminary numerical analysis and verifications. Int J Mach Tools Manuf 42:643-652
20. Judd RL, Aftab K, Elbestawi MA (1994) An investigation of the use of heat pipes for machine tool spindle bearing cooling. Int J Mach Tools Manuf 34(7):1031-1043
21. Judd RL, MacKenize HS, Elbestawi MA (1995) An investigation of a heat pipe cooling system for use in turning on a lathe. Int J Mach Tools Manuf 10(6):357-366
22. Jawahir IS, van Luttervelt CA (1993) Recent developments in chip control research and applications. Annals CIRP 42 (2):659-693
23. Kalpakjian S, Schmid SR (2001) Manufacturing engineering and technology, 4th edn. Prentice-Hall, Upper Saddle River, New Jersey
24. Lu L (2003) Investigation of embedded heat pipe in cutting tools for dry machining. Masters thesis, Temple University, Philadelphia, Pennsylvania
25. Loewen EG, Shaw MC (1954) On the analysis of cutting-tool temperatures. Trans ASME 76:217-231
26. Maekawa K, Nakano Y, Kitagawa T (1996) Finite element analysis of thermal behavior in metal machining. JSME Int J C 39(4):864-869
27. Merchant ME (1945) Mechanics of the metal cutting process. I. Orthogonal cutting and a type 2 chip. J Appl Physi 16(5):267-275
28. Olson WW, Sutherland JW (1994) Environmentally conscious manufacturing. In: Proceedings of the Japan-USA Symposium on Flexible Automation, Kobe, Japan, July 1994
29. Peterson GP (1999) Chapter 12 - heat pipes. In: Rohnsenow WM, Hartnett JP, Cho YI (eds) McGraw-Hill handbook of heat transfer, 3rd edn. McGraw-Hill, New York
30. Radulescu R, Kapoor SG (1994) An analytical model for prediction of tool temperature fields during continuous and interrupted cutting. J Ind Eng - Trans ASME 116:135-143
31. Sata T, Takeuchi Y (1981) Improvement of working accuracy of NC lathe by compensation for the thermal expansion of the tool. Annals CIRP 30(1):445-449
32. Sreejith PS, Ngoi BKA (2000) Dry machining: machining of the future. J Mater Process Technol 101:287-291
33. Sugishita H, Nishiyama H, Nagayasu O, Sato H, O-Hori M (1988) Development of concrete machining center and identification of the dynamic and the thermal structural behavior. Annals CIRP 37:377-380
34. Stephenson DA, Ali A (1992) Tool temperatures in interrupted metal cutting. J Eng Ind 114:127-135
35. Stephenson DA, Jen TC, Lavine AS (1997) Cutting tool temperatures in contour turning: transient analysis and experimental verification. J Manuf Sci Eng - Trans ASME 119 (4):494-501
36. Tay AO, Stevenson MG, de Vahl Davis G (1974) Using the finite element method to determine temperature distributions in orthogonal machining. Proc Inst Mech Eng 188:627-638
37. Usui E, Shirakashi T, Kitagawa T (1978) Analytical prediction of three-dimensional cutting process. Part 3: cutting temperature and crater wear of carbide tool. J Eng Ind - Trans ASME 100:236-243