Using Mg and Mg-nanoAl2O3 concentric alternating macro-ring material design to enhance the properties of magnesium

Composites Science and Technology

Volumn 69, Issue 3-4, 2009, Pages 438-444

  Wong, J C ^a   Paramsothy, M ^a   Gupta, M ^a  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

A. Hybrid nano composite; A. Macro ring structured; B. Stressed interface; Magnesium

Indexed keywords

DESIGN; EXTRUSION; LIGHT METALS; MAGNESIUM; MAGNESIUM PRINTING PLATES; MECHANICAL PROPERTIES; NANOCOMPOSITES; SUPERCONDUCTING CABLES; TENSILE STRENGTH;

A. HYBRID NANO-COMPOSITE; A. MACRO-RING STRUCTURED; B. STRESSED INTERFACE; COST-OF-MANUFACTURING; ENGINEERING DESIGNS; EXTRUSION LAYERS; HYBRID COMPOSITES; MACRO STRUCTURES; MATERIAL DESIGNS; MECHANICAL PROPERTY IMPROVEMENTS; RING STRUCTURES; SIMULTANEOUS DESIGNS;

CARBON FIBER REINFORCED PLASTICS;

CHEMICAL COMPOSITION; MECHANICAL PROPERTY; NANOCOMPOSITE; RING; STRESS; TENSILE PROPERTY;

EID: 59149083802     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2008.11.009     Document Type: Article

References (54)

1. Autumn K., and Peattie A.M. Mechanisms of adhesion in geckos. Integr Comp Biol 42 (2002) 1081-1090
2. Jeong H.E., Lee S.H., Kim P., and Suh K.Y. High aspect-ratio polymer nanostructures by tailored capillarity and adhesive force. Colloids Surf A 313-314 (2008) 359-364
3. Yao H., and Gao H. Multi-scale cohesive laws in hierarchical materials. Int J Solids Struct 44 (2007) 8177-8193
4. Ahmad Z., and Mark J.E. Biomimetic materials: recent developments in organic-inorganic hybrids. Mater Sci Eng C 6 (1998) 183-196
5. Mayer G. New classes of tough composite materials - lessons from natural rigid biological systems. Mater Sci Eng C 26 (2006) 1261-1268
6. Barthelat F., Tang H., Zavattieri P.D., Li C.-M., and Espinosa H.D. On the mechanics of mother-of-pearl: a key feature in the material hierarchical structure. J Mech Phys Solids 55 2 (2007) 306-337
7. Wisniewski N., and Reichert M. Methods for reducing biosensor membrane biofouling. Colloids Surf B 18 (2000) 197-219
8. Abraham S., Brahim S., Ishihara K., and Guiseppi-Elie A. Molecularly engineered p(HEMA)-based hydrogels for implant biochip biocompatibility. Biomaterials 26 (2005) 4767-4778
9. Lewis A.L. Phosphorylcholine-based polymers and their use in the prevention of biofouling. Colloids Surf B 18 (2000) 261-275
10. Repperger D.W., Phillips C.A., Neidhard-Doll A., Reynolds D.B., and Berlin J. Actuator design using biomimicry methods and a pneumatic muscle system. Control Eng Prac 14 (2006) 999-1009
11. Repperger D.W., Phillips C.A., Neidhard-Doll A., Reynolds D.B., and Berlin J. Power/energy metrics for controller evaluation of actuators similar to biological systems. Mechatronics 15 4 (2005) 459-469
12. Ismail Y.A., Shin S.R., Shin K.M., Yoon S.G., Shon K., Kim S.I., et al. Electrochemical actuation in chitosan/polyaniline microfibers for artificial muscles fabricated using an in situ polymerization. Sensor Actuat B 129 (2008) 834-840
13. He J.-H., Liu Y., Xu L., Yu J.-Y., and Sun G. Biomimic fabrication of electrospun nanofibers with high-throughput. Chaos Solitons Fract 37 3 (2008) 643-651
14. Trancik J.E., Czernuszka J.T., Bell F.I., and Viney C. Nanostructural features of a spider dragline silk as revealed by electron and X-ray diffraction studies. Polymer 47 15 (2006) 5633-5642
15. Li S.H., Zeng Q.Y., Xiao Y.L., Fu S.Y., and Zhou B.L. Biomimicry of bamboo bast fiber with engineering composite materials. Mater Sci Eng C 3 (1995) 125-130
16. Garcia-Serna J., Perez-Barrigon L., and Cocero M.J. New trends for design towards sustainability in chemical engineering: green engineering. Chem Eng J 133 (2007) 7-30
17. Yamanaka K., Nakagawa T., Kobayashi F., Kanada S., Tanahashi M., Muramatsu T., et al. Criteria for acceptable levels of the Shinkansen Super Express train noise and vibration in residential areas. J Sound Vib 84 4 (1982) 573-591
18. Howe M.S., Winslow A., Iida M., and Fukuda T. Rapid calculation of the compression wave generated by a train entering a tunnel with a vented hood: short hoods. J Sound Vib 311 1-2 (2008) 254-268
19. Nagakura K. Localization of aerodynamic noise sources of Shinkansen trains. J Sound Vib 293 3-5 (2006) 547-556
20. Lloyd D.J. Particle reinforced aluminium and magnesium matrix composites. Int Mater Rev 39 1 (1994) 1-23
21. Veedu V.P., Cao A., Li X., Ma K., Soldano C., Kar S., et al. Multifunctional composites using reinforced laminae with carbon-nanotube forests. Nat Mater 5 (2006) 457-462
22. Lavernia E.J., Han B.Q., and Schoenung J.M. Cryomilled nanostructured materials: processing and properties. Mater Sci Eng A (2008) 10.1016/j.msea.2007.06.09
23. 3 as reinforcement. Mater Sci Eng A 392 (2005) 163-168
24. Ferkel H., and Mordike B.L. Magnesium strengthened by SiC nanoparticles. Mater Sci Eng A 298 (2001) 193-199
25. Huard G., Angers R., Krishnadev M.R., Tremblay R., and Dube D. SiCp/Mg composites made by low-energy mechanical processing. Can Metall Quart 38 (1999) 193-200
26. 3 reinforcement on microstructure and mechanical behavior of solidification processed elemental Mg. J Alloys Compd 419 (2006) 84-90
27. Hassan S.F., and Gupta M. Effect of different types of nano-size oxide particulates on microstructural and mechanical properties of elemental Mg. J Mater Sci 41 (2006) 2229-2236
28. 3 particulates as reinforcement. Met Mater Trans A 36 8 (2005) 2253-2258
29. 3 composites with improved properties using microwave assisted sintering methods. J Mater Sci 40 (2005) 3395-3402
30. 3 in submicron length scale using microwave assisted rapid sintering. Mater Sci Technol 21 9 (2005) 1063-1070
31. Ibrahim I.A., Mohamed F.A., and Lavernia E.J. Particulates reinforced metal matrix composites - a review. J Mater Sci 26 (1991) 1137-1156
32. Upadhaya G.S. Particulate metal matrix composites through powder metallurgy - some specific systems. Key Eng Mater 104-107 (1995) 141-154
33. 2 + TiC) ceramic particulates. Mater Lett 59 17 (2005) 2105-2109
34. Gupta M., and Wong W.L.E. Enhancing overall mechanical performance of metallic materials using two-directional microwave assisted rapid sintering. Scripta Mater 52 (2005) 479-483
35. Gupta M., Sikand R., and Gupta A.K. Effect of extrusion on the redistribution of secondary phases in a Cu-Zn based metal matrix composite processed using ingot metallurgy route. Scripta Metall Mater 30 10 (1994) 1343-1348
36. Tsoumis G. Science and technology of wood. Structure, properties, utilization (1991), Van Nostrand Reinhold, New York (USA)
37. Esawi A.M.K., and Borady M.A.E. Carbon nanotube-reinforced aluminium strips. Comp Sci Technol 68 2 (2008) 486-492
38. Tan M.J., and Zhang X. Powder metal matrix composites: selection and processing. Mater Sci Eng A 244 (1998) 80-85
39. 3 particulate-reinforced aluminum matrix composites. Mater Chem Phys 85 (2004) 438-443
40. Lan J., Yang Y., and Li X. Microstructure and microhardness of SiC nanoparticles reinforced magnesium composites fabricated by ultrasonic method. Mater Sci Eng A 386 (2004) 284-290
41. Paramsothy M., Srikanth N., and Gupta M. Processing, microstructure and properties of a Mg/Al bimetal macrocomposite. J Compos Mater 42 24 (2008) 2567-2584
42. Paramsothy M., Srikanth N., and Gupta M. Solidification processed Mg/Al bimetal macrocomposite: microstructure and mechanical properties. J Alloys Compd 461 (2008) 200-208
43. Paramsothy M., Hassan S.F., Srikanth N., and Gupta M. Toughening mechanisms in Mg/Al macrocomposites: texture and interfacial mechanical interlocking. J Phys D 41 (2008) 175402-175410
44. Krishna B.V., Venugopal P., and Rao K.P. Solid state joining of dissimilar sintered P/M preform tubes by simultaneous cold extrusion. Mater Sci Eng A 386 (2004) 301-317
45. In: Needleman A. (Ed). Proceedings of the conference on the 70th birthday of Dr. Owen Richmond (Seven Springs, PA). The integration of material, process and product design-plain strain localization in metals (1999), AA Balkema Publishers, Vermont (Canada) 59-70
46. Dunand D., and Mortensen A. Thermal mismatch dislocations produced by large particles in a strain-hardening matrix. Mater Sci Eng A 135 (1991) 179-184
47. Srikanth N., Ganesh V.V., and Gupta M. Damping characterisation of aluminium containing interconnected wire reinforcement using a novel frequency domain based method. Mater Sci Technol 19 (2003) 48-54
48. Nairn J.A. Residual stress effects in fracture of composites and adhesives. J Appl Mech 64 (1997) 804-810
49. Wagner H.D., and Nairn J.A. Residual thermal stresses in three concentric transversely isotropic cylinders: application to thermoplastic-matrix composites containing a transcrystalline interphase. Comp Sci Technol 57 9-10 (1997) 1289-1302
50. Bastier A., Maitournam M.H., Roger F., and Van K.D. Modelling of the residual state of friction stir welded plates. J Mater Proc Technol 200 (2008) 25-37
51. Hu J., Chou Y.K., and Thompson R.G. Nanocrystalline diamond coating tools for machining high-strength Al alloys. Int J Refract Metals Hard Mater 26 (2008) 135-144
52. 3SN multifilamentary superconducting wires. Fusion Eng Des 82 (2007) 1447-1453
53. 3Al conductor for coils with react-and-wind method. Fusion Eng Des 82 (2007) 1493-1499
54. 2 superconducting wires. Physica C 468 (2008) 223-228