Electrohydrodynamic processing of micro- and nanometer biological materials

Biomaterials Fabrication and Processing Handbook

Volumn , Issue , 2008, Pages 275-334

  Wu, Yiquan ^a   Clark, Robert Lewis ^a  

^a Duke University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 58549107133     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (113)

1. Lefebvre, A., Atomization and Sprays, Taylor & Francis Inc., Hemisphere Publishing, New York, 1989.
2. Hartman, R.P.A. et al., Jet break-up in electrohydrodynamic atomization in the cone-jet mode, Journal of Aerosol Science, 31, 65, 2000.
3. Grace, J.M. and Marijnissen, J.C.M., A review of liquid atomization by electrical means, Journal of Aerosol Science, 25, 1005, 1994.
4. Borra, J.P. et al., A new production process of powders with defined properties by electrohydrodynamic atomization of liquids and post-production electrical mixing, Journal of Electrostatics, 633, 40, 1997.
5. Lee, J.G. et al., Electrohydrodynamic (EHD) dispensing of nanoliter DNA droplets for microarrays, Biosensors and Bioelectronics, 21, 2240, 2006.
6. Chen, D.R. and Pui, D.Y.H., Electrospraying of conducting liquids for monodisperse aerosol generation in the 4 nm to 1.8µm diameter range, Journal of Aerosol Science, 27, 646, 1996.
7. Ding, L., Lee, T., and Wang, C.H., Fabrication of monodispersed taxol-loaded particles using electrohydrodynamic atomization, Journal of Controlled Release, 102, 395, 2005.
8. Samarasinghe, S.R. et al., Printing gold nanoparticles with an electrohydrodynamic direct-write device, Gold Bulletin, 39, 48, 2006.
9. Leeuwenburgh, S. et al., Electrostatic spray deposition (ESD) of calcium phosphate coatings, Journal of Biomedical Materials Research A, 66A, 330, 2003.
10. Siebers, M.C. et al., Electrostatic spray deposition (ESD) of calcium phosphate coatings, an in vitro study with osteoblast-like cells, Biomaterials, 25, 2019, 2004.
11. Ku, B.K. and Kim, S.S., Electrohydrodynamic spraying characteristics of glycerol solutions in vacuum, Journal of Electrostatics, 57, 109, 2003.
12. Borra, J.P., Ehouarn, P., and Boulaud, D., Electrohydrodynamic atomisation of water stabilised by glow discharge-operating range and droplet properties, Journal of Aerosol Science, 35, 1313, 2004.
13. Cloupeau, M. and Prunetfoch, B., Electrostatic spraying of liquids-main functioning modes, Journal of Electrostatics, 25, 165, 1990.
14. Gañan-Calvo, A.M. and Barrero, A., A global model for the electrospraying of liquids in steady cone-jet mode, Journal of Aerosol Science, 27, S179, 1996.
15. Barrero, A. and Gañan-Calvo, A.M., Taylor cone electrohydrodynamics: the minimum and maximum flow rates in electrospraying, Journal of Aerosol Science, 30, 973, 1999.
16. Rayleigh, L., On the instability of jets, Proceedings of the London Mathematical Society, 11, 4, 1878.
17. Rayleigh, L., On the conditions of instability of electrified drops, Proceedings of the Royal Society, 29, 71, 1879.
18. Zeleny, J., Instability of electrified liquid surface, Physical Review, 10, 1, 1917.
19. Vonnegut, B. and Neubauer, R.L., Production of monodisperse liquid particles by electrical atomization, Journal of Colloid Science, 7, 616, 1952.
20. Taylor, G.I., Disintegration of water drops in an electric field, Proceedings of the Royal Society of London Series A Mathematical and Physical Sciences, 280, 383, 1964.
21. Joffer, G. et al., Deformation of liquid menisci under the action of an electric-field, Journal of electrostatics, 13, 151, 1982.
22. Noymer, P.D. and Garel, M., Stability and atomization characteristics of electrohydrodynamic jets in the cone-jet and multi-jet modes, Journal of Aerosol Science, 31, 1165, 2000.
23. Gañan-Calvo, A.M., Cone-jet analytical extension of Taylor’s electrostatic solution and the asymptotic universal scaling laws in electrospraying, Physical Review Letters, 79, 217, 1997.
24. Gañan-Calvo, A.M., The size and charge of droplets in the electrospraying of polar liquids in cone-jet mode and the minimum droplet size, Journal of Aerosol Science, 25, 309, 1994.
25. Mutoh, M., Kaied, A.S., and Kamimura, K., Convergence and disintegration of liquid jets induced by an electrostatic-field, Journal of Applied Physics, 50, 3174, 1979.
26. Smith, D.P.H., The electrohydrodynamic atomization of liquids, IEEE Transactions on industry applications, 22, 527, 1986.
27. Hartman, R.P.A. et al., Electrohydrodynamic atomization in the cone-jet mode physical modeling of the liquid cone and jet, Journal of Aerosol Science, 30, 823, 1999.
28. Tang, K. and Gomez, A., On the structure of an electrostatic spray of monodisperse droplets, Physics of Fluids, 6, 2317, 1994.
29. Delamora, J.F. and Loscertales, I.G., The current emitted by highly conducting Taylor cones, Journal of Fluid Mechanics, 260, 155, 1994.
30. Gañan-Calvo, A.M., Dávila, J., and Barrero, A., Current and droplet size in the electrospraying of liquids:scaling laws, Journal of Aerosol Science, 28, 249, 1997.
31. Shtern, V. and Barrero, A., Striking features of fluid-flows in Taylor cones related to electrospray, Journal of Aerosol Science, 25, 1049, 1994.
32. Jaworek, A. and Krupa, A., Forms of the multijet mode of electrohydrodynamic spraying, Journal of Aerosol Science, 27, 979, 1996.
33. Yoon, S.S. et al., Modeling multi-jet mode electrostatic atomization using boundary element methods, Journal of Electrostatics, 50, 91, 2001.
34. Duby, M.H. et al., Stabilization of monodisperse electrosprays in the multi-jet mode via electric field enhancement, Journal of Aerosol Science, 37, 306, 2006.
35. Wilhelm, O. and Madler, L., Cone-jet and multijet electrospray: transport and evaporation, Atomization and Sprays, 16, 83, 2006.
36. Cloupeau, M. and Prunetfoch, B., Electrohydrodynamic spraying functioning modes-A critical review, Journal of Aerosol Science, 25, 1021, 1994.
37. Duft, D. et al., Coulomb fission-Rayleigh jets from levitated microdroplets, Nature, 421, 128, 2003.
38. Bailey, A.G., Electrostatic Spraying of Liquid, John Wiley & Sons, New York, 1988.
39. Hayati, I., Bailey, A.I., and Tadros, T.F., Mechanism of stable jet formation in electrohydrodynamic atomization, Nature, 319, 41, 1986.
40. Hartman, R.P.A., The evolution of electrohydrodynamic sprays produced in the cone-jet mode, a physical model, Journal of Electrostatics, 47, 143, 1999.
41. Kelly, A.J., Charge injection electrostatic atomization modeling, Aerosol Science and Technology, 12, 526, 1990.
42. Xie, J.W. et al., Electrohydrodynamic atomization for biodegradable polymeric particle production, Journal of Colloid and Interface Science, 302, 103, 2006.
43. Hartman, R.P.A., Marijnissen, J.C.M., and Scarlett, B., Electrohydrodynamic atomization in the conejet mode: a physical model of the liquid cone and jet, Journal of Aerosol Science, 28, S527, 1997.
44. Melcher, J.R., Field-Coupled Surface Waves, MIT Press, Cambridge, MA. 1962.
45. Rosenbaum, S. and Clasen, R., Electrospraying of glasses-preparation of glass coatings on glass, Journal of Aerosol Science, 30, 975, 1999.
46. Chen, C.H. et al., Electrostatic sol-spray deposition of nanostructured ceramic thin films, Journal of Aerosol Science, 30, 959, 1999.
47. Jaworek, A. et al., Spectroscopic studies of electric discharges in electrospraying, Journal of Electrostatics, 63, 635, 2005.
48. Moinard-Checot, D. et al., Nanoparticles for drug delivery: review of the formulation and process difficulties illustrated by the emulsion-diffusion process, Journal of Nanoscience and Nanotechnology, 6, 2664, 2006.
49. Sinha, R. et al., Nanotechnology in cancer therapeutics: bioconjugated nanoparticles for drug delivery, Molecular cancer Therapeutics, 5, 1909, 2006.
50. De Gaetano, F. et al., Sol-gel processing of drug delivery materials and release kinetics, Journal of Materials Science-Materials in Medicine, 16, 261, 2005.
51. Langer, R., Drug delivery and targeting, Nature, 392, 5, 1998.
52. Soppimath, K.S. et al., Biodegradable polymeric nanoparticles as drug delivery devices, Journal of Controlled Release, 70, 1, 2001.
53. Re, M.I., Formulating drug delivery systems by spray drying, Drying Technology, 24, 433, 2006.
54. Xu, Y.X. and Hanna, M.A., Electrospray encapsulation of water-soluble protein with polylactide-Effects of formulations on morphology, encapsulation efficiency and release profile of particles, International Journal of Pharmaceutics, 320, 30, 2006.
55. Ijsebaert, J.C. et al., Electrohydrodynamic atomization of drug solutions for inhalation purposes, Journal of Applied Physiology, 91, 2735, 2001.
56. Reyderman, L. and Stavchansky, S., Electrostatic spraying and its use in drug delivery-cholesterol microspheres, International Journal of Pharmaceutics, 124, 75, 1995.
57. Poste, G. and Kirsh, R., Site-specific targeted drug delivery in cancer-therapy, Biotechnology, 1, 869, 1983.
58. Lu, Z.R. et al., Design of novel bioconjugates for targeted drug delivery, Journal of Controlled Release, 78, 165, 2002.
59. Barbe, C. et al., Silica particles: a novel drug-delivery system, Advanced Materials, 16, 1959, 2004.
60. Roh, K.H., Martin, D.C., and Lahann, J., Biphasic Janus particles with nanoscale anisotropy, Nature Materials, 4, 759, 2005.
61. Xie, J.W., Marijnissen, J.C.M., and Wang, C.H., Microparticles developed by electrohydrodynamic atomization for the local delivery of anticancer drug to treat C6 glioma in vitro, Biomaterials, 27, 3321, 2006.
62. Leeuwenburgh, S.C.G. et al., Influence of deposition parameters on morphological properties of biomedical calcium phosphate coatings prepared using electrostatic spray deposition, Thin Solid Films, 472, 105, 2005.
63. Leeuwenburgh, S.C.G. et al., Morphology of calcium phosphate coatings for biomedical applications deposited using electrostatic spray deposition (ESD), Thin Film Solid, 503, 69, 2006.
64. Yu, Y. et al., Highly porous spongelike ceramic films with bimodal pore structure prepared by electrostatic spray deposition technique, Aerosol Science and Technology, 39, 276, 2005.
65. 2 films fabricated using the electrostatic spray deposition (ESD) technique, Journal of Materials Chemistry, 6, 765, 1996.
66. Rammelt, S. et al., Coating of titanium implants with collagen, RGD peptide and chondroitin sulfate, Biomaterials, 27, 5561, 2006.
67. Brodie, J.C. et al., Osteoblast interactions with calcium phosphate ceramics modified by coating with type I collagen, Journal of Biomedical Materials Research A, 73A, 409, 2005.
68. Leeuwenburgh, S.C.G. et al., Influence of precursor solution parameters on chemical properties of calcium phosphate coatings prepared using electrostatic spray deposition (ESD), Biomaterials, 25, 641, 2004.
69. LeGeros, R.Z., Biodegradation and bioresorption of calcium phosphate ceramics, Clinic Materials, 14, 65, 1993.
70. Layrolle, P., De Groot, K., and Van Blitterswijk, C.A., Biomimetic hydroxyapatite coating on Ti6Al4V induced by pre-calcification, Bioceramics, 11, 465, 1998.
71. Leeuwenburgh, S.C.G. et al., Deposition of calcium phosphate coatings with defined chemical properties using the electrostatic spray deposition technique, Journal of the European Ceramic Society, 26, 487, 2006.
72. Leeuwenburgh, S.C.G. et al., In vitro and in vivo reactivity of porous, electrosprayed calcium phosphate coatings, Biomaterials, 27, 3368, 2006.
73. Kim, B.H., Hydroxyapatite layers prepared by sol-gel assisted electrostatic spray deposition, Ceramics International, 33, 119, 2007.
74. Hoyer, B. et al., Electrostatic spraying: a novel technique for preparation of polymer coatings on electrodes, Analytical Chemistry, 68, 3840, 1996.
75. Morota, K. et al., Poly(ethylene oxide) thin films produced by electrospray deposition: morphology control and additive effects of alcohols on nanostructure, Journal of Colloid and Interface Science, 279, 484, 2004.
76. Berkland, C., Pack, D.W., and Kim, K., Controlling surface nano-structure using flow-limited fieldinjection electrostatic spraying (FFESS) of poly(d, l-lactide-co-glycolide), Biomaterials, 25, 5649, 2004.
77. Morozov, V.N. and Morozova, T.Y., Electrospray deposition as a method to fabricate functionally active protein films, Analytical Chemistry, 71, 1415, 1999.
78. Uematsu, I. et al., Surface morphology and biological activity of protein thin films produced by electrospray deposition, Journal of Colloid and Interface Science, 269, 336, 2004.
79. Lee, B. et al., Fabrication of a protein film by electrospray deposition method and investigation of photochemical properties by persistent spectral hole burning, Biomaterials, 24, 2045, 2003.
80. Buchko, C.J., Kozloff, K.M., and Martin, D.C., Surface characterization of porous, biocompatible protein polymer thin films, Biomaterials, 22, 1289, 2001.
81. Matsuzawa, M., Krauthamer, V., and Potember, R.S., Directional guidance of neurite outgrowth using substrates patterned with biomaterials, Biosystems, 35, 199, 1995.
82. Biebricher, A. et al., Controlled three-dimensional immobilization of biomolecules on chemically patterned surfaces, Journal of Biotechnology, 112, 97, 2004.
83. Gates, B.D. et al., New approaches to nanofabrication: molding, printing, and other techniques, Chemical Reviews, 105, 1171, 2005.
84. Blake, T.A. et al., Preparative linear ion trap mass spectrometer for separation and collection of purified proteins and peptides in arrays using ion soft landing, Analytical Chemistry, 76, 6293, 2004.
85. Ouyang, Z. et al., Preparing protein microarrays by soft-landing of mass-selected ions, Science, 301, 1351, 2003.
86. Welle, A.M. and Jacobs, H.O., Printing of organic and inorganic nanomaterials using electrospray ionization and Coulomb-force-directed assembly, Applied Physics Letters, 87, 263119, 2005.
87. Petrik, J., Diagnostic applications of microarrays, Transfusion Medicine, 16, 233, 2006.
88. Templin, M.F. et al., Protein microarrays: promising tools for proteomic research, Proteomics, 3, 2155, 2003.
89. Kallioniemi, O.P., Biochip technologies in cancer research, Annals of Medicine, 33, 142, 2001.
90. Jain, K.K., Applications of biochips: from diagnostics to personalized medicine, Current Opinion in Drug Discovery and Development, 7, 285, 2004.
91. Morozov, V.N. and Morozova, T.Y., Electrospray deposition as a method for mass fabrication of monoand multicomponent microarrays of biological and biologically active substances, Analytical Chemistry, 71, 3110, 1999.
92. Lee, B. et al., Fabrication of protein microarrays for immunoassay using the electrostatic spray deposition (ESD) method, Journal of Chemical Engineering of Japan, 36, 1370, 2003.
93. Moerman, R. et al., Miniaturized electrospraying as a technique for the production of microarrays of reproducible micrometer-sized protein spots, Analytical Chemistry, 73, 2183, 2001.
94. Khani, Z. et al., Alginate/carbon composite beads for laccase and glucose oxidase encapsulation: application in biofuel cell technology, Biotechnology Letters, 28, 1779, 2006.
95. Desai, T.A., Microfabrication technology for pancreatic cell encapsulation, Expert Opinion on Biological Therapy, 2, 633, 2002.
96. Visted, T., Bjerkvig, R., and Enger, P.O., Cell encapsulation technology as a therapeutic strategy for CNS malignancies, Neuro-Oncology, 3, 201, 2001.
97. Uludag, H., De Vos, P., and Tresco, P.A., Technology of mammalian cell encapsulation, Advanced Drug Delivery Reviews, 42, 29, 2000.
98. Colton, C.K., Engineering challenges in cell-encapsulation technology, Trends in Biotechnology, 14, 158, 1996.
99. Amsden, B.G. and Goosen, M.F.A., An examination of factors affecting the size, distribution and release characteristics of polymer microbeads made using electrostatics, Journal of Controlled Release, 43, 183, 1997.
100. Watanabe, H., Matsuyama, T., and Yamamoto, H., Preparation of immobilized enzyme gel particles using an electrostatic atomization technique, Biochemical Engineering Journal, 8, 171, 2001.
101. Xu, Y.X., Skotak, M., and Hanna, M., Electrospray encapsulation of water-soluble protein with polylactide. I. Effects of formulations and process on morphology and particle size, Journal of Microencapsulation, 23, 69, 2006.
102. Zhou, Y. et al., Scalable encapsulation of hepatocytes by electrostatic spraying, Journal of Biotechnology, 117, 99, 2005.
103. Al-Hajry, H.A. et al., Electrostatic encapsulation and growth of plant cell cultures in alginate, Biotechnology Progress, 15, 768, 1999.
104. Orive, G. et al., Microencapsulation of an anti-VE-cadherin antibody secreting 1B5 hybridoma cells, Biotechnology and Bioengineering, 76, 285, 2001.
105. Terzano, C. and Allegra, L., Importance of drug delivery system in steroid aerosol therapy via nebulizer, Pulmonary Pharmacology and Therapeutics, 15, 449, 2002.
106. Sweeney, L.G. et al., Spray-freeze-dried liposomal ciprofloxacin powder for inhaled aerosol drug delivery, International Journal of Pharmaceutics, 305, 180, 2005.
107. Corcoran, T.E. and Gamard, S., Development of aerosol drug delivery with helium oxygen gas mixtures, Journal of Aerosol Medicine-Deposition Clearance and Effects in the Lung, 17, 299, 2004.
108. Pareta, R. et al., Electrohydrodynamic atomization of protein (bovine serum albumin), Journal of Materials Science-Materials in Medicine, 16, 919, 2005.
109. Davies, L.A. et al., Electrohydrodynamic comminution: a novel technique for the aerosolisation of plasmid DNA, Pharmaceutical Research, 22, 1294, 2005.
110. Gomez, A. et al., Production of protein nanoparticles by electrospray drying, Journal of Aerosol Science, 29, 561, 1998.
111. Jayasinghe, S.N., Qureshi, A.N., and Eagles, P.A.M., Electrohydrodynamic jet processing: an advanced electric-field-driven jetting phenomenon for processing living cells, Small, 2, 216, 2006.
112. Li, S.W., Jayasinghe, S.N., and Edirisinghe, M.J., Aspirin particle formation by electric-field-assisted release of droplets, Chemical Engineering Science, 61, 3091, 2006.
113. Eagles, P.A.M., Qureshi, A.N., and Jayasinghe, S.N., Electrohydrodynamic jetting of mouse neuronal cells, Biochemical Journal, 394, 375, 2006.