Lost mold-rapid infiltration forming of mesoscale ceramics: Part 2, geometry and strength improvements

Journal of the American Ceramic Society

Volumn 92, Issue SUPPL. 1, 2009, Pages

  Antolino, Nicholas E ^a   Hayes, Gregory ^a   Kirkpatrick, Rebecca ^a   Muhlstein, Christopher L ^a   Frecker, Mary I ^b   Mockensturm, Eric M ^b   Adair, James H ^a  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

^b The Pennsylvania State University

Author keywords

[No Author keywords available]

Indexed keywords

BEND STRENGTHS; CONFIDENCE INTERVALS; CROSS SECTIONS; FORMING PROCESSES; ITERATIVE PROCESSES; MESOSCALE; MOLD CAVITIES; MOLD WALLS; OPTICAL PROFILOMETRIES; PHOTOLITHOGRAPHIC PROCESSES; PROCESS IMPROVEMENTS; RAPID INFILTRATIONS; STRENGTH IMPROVEMENTS; TETRAGONAL ZIRCONIA POLYCRYSTALS; TIP RADIUSES; TRAPEZOIDAL CROSS SECTIONS; TRIANGULAR TESTS; ULTRA VIOLETS; UPPER SURFACES; WEIBULL MODULUS;

GRAIN GROWTH; HIGH ENERGY FORMING; INFILTRATION; MILITARY OPERATIONS; MOLDS; PHOTOLITHOGRAPHY; SEEPAGE; SINTERING; SOIL MECHANICS; WEAVING; WEIBULL DISTRIBUTION; ZIRCONIA;

YTTRIUM ALLOYS;

EID: 58149335318     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2008.02719.x     Document Type: Conference Paper

References (43)

1. M. J. Madou, Fundamentals of Microfabrication: The Science of Miniaturization, 2nd Edition, CRC Press, Boca Raton, FL, 2002.
2. A. C. R. Grayson, R. S. Shawgo, A. M. Johnson, N. T. Flynn, Y. W. Li, M. J. Cima R. Langer A BioMEMS Review: MEMS Technology for Physiologically Integrated Devices Proc. IEEE, 92 [1] 6 21 (2004).
3. D. B. Weibel, W. R. DiLuzio G. M. Whitesides Microfabrication Meets Microbiology Nat. Rev. Microbiol., 5 [3] 209 18 (2007).
4. M. Heule, S. Vuillemin L. J. Gauckler Powder-Based Ceramic Meso- and Microscale Fabrication Processes Adv. Mater., 15 [15] 1237 45 (2003).
5. M. E. Aguirre, G. Hayes, M. Frecker, J. Adair N. Antolino Fabrication and Design of a Nanoparticulate Enabled Micro Forceps in Proceedings of the IDETC/CIE, New York, NY. 2008.
6. M. I. Frecker, R. P. Dziedzic R. S. Haluck Design of Multifunctional Compliant Mechanisms for Minimally Invasive Surgery Minim. Invasive Ther. Allied Technol., 11 [5-6] 311 9 (2002).
7. N. E. Antolino, G. Hayes, R. Kirkpatrick, C. L. Muhlstein, M. I. Frecker, E. Mockensturm J. H. Adair Lost Mold Rapid Infiltration Forming of Mesoscale Ceramics: Part 1, Fabrication J. Am. Ceram. Soc. 2008 accepted in this issue.
8. 2 Composites J. Am. Ceram. Soc., 66 [6] 396 8 (1983).
9. F. F. Lange, B. I. Davis E. Wright Processing-Related Fracture Origins: 4, Elimination of Voids Produced by Organic Inclusions J. Am. Ceram. Soc., 69 [1] 66 9 (1986).
10. U. P. Schonholzer, F. Filser, P. Kocher L. J. Gauckler Fabrication of a Surface Pattern in Zirconia Am. Ceram. Soc. Bull., 79 [12] 45 7 (2000).
11. U. P. Schonholzer, R. Hummel L. J. Gauckler Microfabrication of Ceramics by Filling of Photoresist Molds Adv. Mater., 12 [17] 1261 3 (2000).
12. M. Heule L. J. Gauckler Microfabrication of Ceramics Based on Colloidal Suspensions and Photoresist Masks J. Photopolym. Sci. Technol., 14 [3] 449 52 (2001).
13. U. P. Schonholzer, N. Stutzmann, T. A. Tervoort, P. Smith L. J. Gauckler Micropatterned Ceramics by Casting into Polymer Molds J. Am. Ceram. Soc., 85 [7] 1885 7 (2002).
14. A.del Campo C. Greiner SU-8: A Photoresist for High-Aspect-Ratio and 3D Submicron Lithography J. Micromech. Microeng., 17 [6] R81 95 (2007).
15. E. F. Reznikova, J. Mohr H. Hein Deep Photo-Lithography Characterization of SU-8 Resist Layers Microsyst. Technol., 11 [4-5] 282 91 (2005).
16. S. J. Lee Top-Edge Profile Control for SU-8 Structural Photoresist pp. 389 90 in Proceedings of the 15th Biennial University/Government/Industry Microelectronics Symposium, Edited by W. Shi, IEEE: Piscataway, NJ, 2003.
17. Z. G. Ling, K. Lian L. K. Jian Improved Patterning Quality of SU-8 Microstructures by Optimizing the Exposure Parameters Proc. SPIE - Int. Soc. Opt. Eng., 3999, 1019 27 (2000).
18. S. H. Mannan, N. N. Ekere, I. Ismail E. K. Lo Squeegee Deformation Study in the Stencil Printing of Solder Pastes IEEE Trans. Compon. Packag. Manuf. Technol. Part A, 17 [3] 470 6 (1994).
19. J. S. Reed, Introduction to the Principles of Ceramic Processing, 2nd Edition, pp. 551 4. John Wiley and Sons Inc., New York, 1988.
20. G. W. Scherer Drying Gels III. Warping Plate J. Non-Cryst. Solids, 91 [1] 83 100 (1987).
21. J. H. Adair, T. R. Shrout, G. L. Messing, M. M. Mandanas T. M. Pecora Dynamic Control and Enhanced Chemical Milling of Ceramics to Submicron Particle Sizes U.S. Patent no 6,415,996, 2002.
22. J. H. Adair, R. Kumar, N. Antolino, C. J. Szepesi, R. K. Kimel S. M. Rouse Colloidal Lessons Learned for Dispersion of Nanosize Particulate Suspensions pp. 93 145 in Lessons in Nanotechnology from Traditional and Advanced Ceramics, Proceedings of the World Academy of Ceramics. Edited by J. F. Baumard. Faenza, Italy, 2005.
23. M. A. Janney, O. O. Omatete, C. A. Walls, S. D. Nunn, R. J. Ogle G. Westmoreland Development of Low-Toxicity Gelcasting Systems J. Am. Ceram. Soc., 81 [3] 581 91 (1998).
24. G. Hong, A. S. Holmes M. E. Heaton SU8 Resist Plasma Etching and Its Optimisation Microsyst. Technol., 10 [5] 357 9 (2004).
25. B. K. Kim, J. W. Hahn K. R. Han Quantitative Phase Analysis in Tetragonal-rich Tetragonal/Monoclinic Two Phase Zirconia by Raman Spectroscopy J. Mater. Sci. Lett., 16 [8] 669 71 (1997).
26. 2 J. Am. Ceram. Soc., 57 [1] 22 4 (1974).
27. 2 Nanograins with Annealing Temperature Phys. Rev. B, 59 [4] 3173 9 (1999).
28. 2 Phys. Rev. B, 55 [14] 8847 51 (1997).
29. 3 System J. Mater. Sci., 17 [1] 240 6 (1982).
30. F. F. Lange Transformation Toughening 1: Size Effects Associated with the Thermodynamics of Constrained Transformations J. Mater. Sci., 17 [1] 225 34 (1982).
31. 2 Polycrystals (Y-TZP) pp. 352 70 in Science and Technology of Zirconia II, Vol. 12, Edited by M. Rühle, N. Claussen A. H. Heuer. American Ceramic Society, Columbus, OH, 1985.
32. R. Apetz M. P. B. van Bruggen Transparent Alumina: A Light-Scattering Model J. Am. Ceram. Soc., 86 [3] 480 6 (2003).
33. 4 J. Eur. Ceram. Soc., 23 [6] 951 9 (2003).
34. R. C. Chiu, T. J. Garino M. J. Cima Drying of Granular Ceramic Films.1. Effect of Processing Variables on Cracking Behavior J. Am. Ceram. Soc., 76 [9] 2257 64 (1993).
35. R. C. Chiu M. J. Cima Drying of Granular Ceramic Films.2. Drying Stress and Saturation Uniformity J. Am. Ceram. Soc., 76 [11] 2769 77 (1993).
36. W. Lan P. Xiao Constrained Drying of an Aqueous Yttria-Stabilized Zirconia Slurry on a Substrate II: Binary Particle Slurry J. Am. Ceram. Soc., 90 [9] 2771 8 (2007).
37. D. M. Holmes, F. Tegeler W. J. Clegg Stresses and Strains in Colloidal Films during Lateral Drying J. Eur. Ceram. Soc., 28 [7] 1381 7 (2008).
38. G. W. Scherer Theory of Drying J. Am. Ceram. Soc., 73 [1] 3 14 (1990).
39. R. A. Lawes Manufacturing Tolerances for UV LIGA Using SU-8 Resist J. Micromech. Microeng., 15 [11] 2198 203 (2005).
40. A. Mirwais, O. J. Martin, L. W. Kenneth, J. B. Michael R. F. Mark High-Resolution Pattern Generation using the Epoxy Novolak SU-8 2000 Resist by Electron Beam Lithography J. Vac. Sci. Technol. B: Microelectron. Nanometer Struct., 21 [4] L5 7 (2003).
41. D. Davies The Statistical Approach to Engineering Design in Ceramics pp. 429 52 in Proceedings of the British Ceramic Society, Edited by D. Godfrey. British Ceramic Society, Cambridge, UK, 1972.
42. J. Wang, M. Rainforth R. Stevens The Grain Size Dependence of the Mechanical-Properties in TZP Ceramics Br. Ceram. Trans. J., 88 [1] 1 6 (1989).
43. B. Basu Toughening of Yttria-Stabilised Tetragonal Zirconia Ceramics Int. Mater. Rev., 50 [4] 239 56 (2005).