Stresses and strains in colloidal films during lateral drying

Journal of the European Ceramic Society

Volumn 28, Issue 7, 2008, Pages 1381-1387

  Holmes, D M ^a   Tegeler, F ^a   Clegg, W J ^a  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

Author keywords

Cracking; Drying; Suspensions; Tape casting

Indexed keywords

CRACK INITIATION; DRYING; FILMS; STRAIN; STRENGTH OF MATERIALS; STRESSES; TENSILE TESTING;

RESIDUAL STRENGTH; WARPING; WATER-FILLED NETWORK;

CERAMIC MATERIALS;

CERAMIC MATERIALS; CRACK INITIATION; DRYING; FILMS; STRAIN; STRENGTH OF MATERIALS; STRESSES; TENSILE TESTING;

EID: 40649117152     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2007.12.017     Document Type: Article

References (75)

1. Kristoffersson A., and Carlström E. Tape casting of alumina in water with an acrylic latex binder. J. Eur. Ceram. Soc. 17 (1997) 289-297
2. In: Majumdar A.S. (Ed). Advances in Drying vol. 2 (1983), Hemisphere Publishing Corporation, New York
3. In: Majumdar A.S. (Ed). Advances in Drying vol. 1 (1980), Hemisphere Publishing Corporation, New York
4. Scherer G.W. Theory of drying. J. Am. Ceram. Soc. 73 (1990) 3-14
5. Simpkins P.G., Johnson Jr. D.W., and Fleming D.A. Drying behaviour of colloidal silica gels. J. Am. Ceram. Soc. 72 (1989) 1816-1821
6. Scherer G.W. Drying gels. III. Warping plate. J. Non-Cryst. Solids 91 (1987) 163-172
7. Mindess S., and Young J.F. Concrete (1981), Prentice-Hall, London
8. Johnson K.L., Kendall K., and Roberts A.D. Surface energy and the contact of elastic solids. Proc. R. Soc. Lond. A 324 (1971) 301-313
9. Kendall K., Alford N.M., and Birchall J.D. Elasticity of particle assemblies as a measure of the surface energy of solids. Proc. R. Soc. Lond. A 412 (1987) 269-283
10. Routh A.F., and Russel W.B. Horizontal drying fronts during solvent evaporation from latex films. AIChE J. 44 (1998) 2088-2098
11. Tirumkudulu M.S., and Russel W.B. Role of capillary stresses in film formation. Langmuir 20 (2004) 2947-2961
12. Tirumkudulu M.S., and Russel W.B. Cracking in drying latex films. Langmuir 21 (2005) 4938-4948
13. Holl Y., Keddie J.L., Mcdonald P.J., and Winnik W.A. In: Provder T., and Urban M.W. (Eds). Film Formation and Coatings: Mechanisms, Properties and Morphology (2001), American Chemical Society, Washington, DC
14. Chiu R.C., and Cima M.J. Drying of granular ceramic films. II. Drying stress and saturation uniformity. J. Am. Ceram. Soc. 76 (1993) 2769-2777
15. Chiu R.C., Garino T., and Cima M.J. Drying of granular ceramic films. I. Effect of processing variables on cracking behaviour. J. Am. Ceram. Soc. 76 (1993) 2257-2264
16. Guo J.J., and Lewis J.A. Aggregation effects on the compressive flow properties and drying behavior of colloidal silica suspensions. J. Am. Ceram. Soc. 82 (1999) 2345-2358
17. Winnik W.A., and Feng J. Latex blends: an approach to zero VOC coatings. J. Coat. Technol. 68 (1996) 39-50
18. Hwa J.C.H. Mechanism of film formation from lattices. Phenomenon of flocculation. J. Polym. Sci., Part A 2 (1964) 785
19. Deegan R.D., Bakajin O., Dupont T.F., Huber G., Nagel S.R., and Witten T.A. Contact line deposits in an evaporating drop. Phys. Rev. E 62 (2000) 756-765
20. Salamanca J.M., Ciampi E., Faux D.A., Glover P.M., Mcdonald P.J., Routh A.F., et al. Lateral drying in thick films of waterborne colloidal particles. Langmuir 17 (2001) 3202-3207
21. Holmes D.M., Kumar R.V., and Clegg W.J. Cracking during lateral drying of alumina suspensions. J. Am. Ceram. Soc. 89 (2006) 1908-1913
22. Deegan R.D., Bakajin O., Dupont T.F., Huber G., Nagel S.R., and Witten T.A. Capillary flow as the cause of ring stains from dried liquid drops. Nature 389 (1997) 827-829
23. Payne J.A. Stress Evolution in Solidifying Coatings, in Department of Chemical Engineering and Materials Science (1998), University of Minnesota, Minnesota pp. 134
24. Payne J.A., Mccormick A.V., and Francis L.F. In situ stress measurement apparatus for liquid applied coatings. Rev. Sci. Instrum. 68 (1997) 4564-4568
25. Stoney G.G. The tension of metallic films deposited by electrolysis. Proc. R. Soc. Lond. A 82 (1909) 172-175
26. 3:latex tape-cast layers. J. Am. Ceram. Soc. 85 (2002) 2409-2416
27. Martinez C.J., and Lewis J.A. Shape evolution and stress development during latex-silica film formation. Langmuir 18 (2002) 4689-4698
28. Huha M.A., and Lewis J.A. Polymer effects on chemorheological and drying behaviour of alumina-poly(vinyl alcohol) gelcasting suspensions. J. Am. Ceram. Soc. 83 (2000) 1957-1963
29. Wedin P., Lewis J.A., and Bergström L. Soluble organic additive effects on stress development during drying of calcium carbonate suspensions. J. Colloid Interf. Sci. 290 (2005) 134-144
30. Smay J.E., and Lewis J.A. Structure and property evolution of aqueous-based lead zirconate titanate tape-cast layers. J. Am. Ceram. Soc. 84 (2001) 2495-2500
31. Wedin P., Martinez C.J., Lewis J.A., Daicic J., and Berström L. Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles. J. Colloid Interf. Sci. 272 (2004) 1-9
32. Kiennemann J., Chartier T., Pagnoux C., Baumard J.F., Huger M., and Lamerant J.M. Drying mechanisms and stress development in aqueous alumina tape-casting. J. Eur. Ceram. Soc. 25 (2005) 1551-1564
33. Lewis J.A., Blackman K.A., and Ogden A.L. Rheological property and stress development during drying of tape-cast ceramic layers. J. Am. Ceram. Soc. 79 (1996) 3225-3234
34. Lampenscherf S., Pompe W., and Wilkinson D.S. Stress development due to capillary condensation in powder compacts: a two-dimensional model study. J. Am. Ceram. Soc. 83 (2000) 1333-1340
35. Lee W.P., and Routh A.F. Why do drying films crack?. Langmuir 20 (2004) 9885-9888
36. Lee W.P., and Routh A.F. Temperature dependence of crack spacing in drying latex films. Ind. Eng. Chem. Res. 45 (2006) 6996-7001
37. Rao M.P., Sanchez-Herencia A.J., Beltz G.E., Mcmeeking R.M., and Lange F.F. Laminar ceramics that exhibit a threshold strength. Science 286 (1999) 102-105
38. Bordia R.K., and Raj R. Sintering behaviour of ceramic films constrained by a rigid substrate. J. Am. Ceram. Soc. 68 (1985) 287-292
39. Bordia R.K., and Jagota A. Crack growth and damage in constrained sintering films. J. Am. Ceram. Soc. 76 (1993) 2475-2485
40. Bordia R.K., and Raj R. Analysis of sintering of a composite with a glass or ceramic matrix. J. Am. Ceram. Soc. 69 (1986) C55-C57
41. Bordia R.K., and Scherer G.W. On constrained sintering. II. Comparison of constitutive models. Acta Metall. 36 (1988) 2399-2409
42. Bordia R.K., and Scherer G.W. On constrained sintering. I. Constitutive model for a sintering body. Acta Metall. 36 (1988) 2393-2397
43. Raj R. Separation of cavitation-strain and creep-strain during deformation. J. Am. Ceram. Soc. 65 (1982) C46
44. Raj R., and Bordia R.K. Sintering behaviour of bi-modal powder compacts. Acta Metall. 32 (1984) 1003-1019
45. Shaw T.M. Drying as an immiscible displacement process with fluid counterflow. Phys. Rev. Lett. 59 (1987) 1671-1674
46. Zarzycki J., Prassas M., and Phalippou J. Synthesis of glasses from gels: the problem of monolithic gels. J. Mater. Sci. 17 (1982) 3371-3379
47. Pekurovsky L.A., and Scriven L.E. In: Provder T., and Urban M.W. (Eds). Film Formation in Coatings: Mechanisms, properties and Morphology (2001), American Chemical Society, Washington, DC
48. Routh A.F., and Russel W.B. A process model for latex film formation: limiting regimes for individual driving forces. Langmuir 15 (1999) 7762-7773
49. Routh A.F., and Russel W.B. Deformation mechanisms during latex film formation: experimental evidence. Ind. Eng. Chem. Res. 40 (2001) 4302-4308
50. Routh A.F., and Russel W.B. Errata: horizontal drying fronts during solvent evaporation from latex films. AIChE J. 48 (2002) 917-918
51. Dufresne E.R., Corwin E.I., Greenblatt N.A., Ashmore J., Wang D.Y., Dinsmore A.D., et al. Flow and fracture in drying nanoparticle suspensions. Phys. Rev. Lett. (2003) 91
52. Dufresne E.R., Stark D.J., Greenblatt N.A., Cheng J.X., Hutchinson J.W., Mahadevan L., et al. Dynamics of fracture in drying suspensions. Langmuir 22 (2006) 7144-7147
53. Juillerat F., Bowen P., and Hofmann H. Formation and drying of colloidal crystals using nanosized silica particles. Langmuir 22 (2006) 2249-2257
54. Lange F.F. Shape forming of ceramic powders by manipulating the interparticle pair potential. Chem. Eng. Sci. 56 (2001) 3011-3020
55. Ninham B.W. On progress in forces since the DLVO theory. Adv. Colloid Interf. Sci. 83 (1999) 1-17
56. Lewis A.A. Effective potentials for polymers and colloids: beyond the van der Waals picture of fluids?. Phil. Trans. R. Soc. Lond. A 359 (2001) 939-960
57. Kendall K. Molecular Adhesion and its Applications (2001), Kluwer Academic, New York
58. Israelachvili J.N. Direct measurements of forces between surfaces in liquids at the molecular level. PNAS 84 (1987) 4722-4724
59. Israelachvili J.N. Intermolecular and Surface Forces (1992), Academic Press, London
60. 3 slurries vs interparticle potential. J. Am. Ceram. Soc. 77 (1994) 1357-1360
61. Chang J.C., Lange F.F., and Pearson D.S. Viscosity and yield stress of alumina slurries containing large concentrations of electrolyte. J. Am. Ceram. Soc. 77 (1994) 19-26
62. Fair G.E., and Lange F.F. Effect of interparticle potential on forming solid, spherical agglomerates during drying. J. Am. Ceram. Soc. 87 (2004) 4-9
63. Fisher M.L., and Lange L.F. Rheological behaviour of slurries and consolidated bodies containing mixed silicon nitride networks. J. Am. Ceram. Soc. 83 (2000) 1861-1867
64. Franks G.V., and Lange F.F. Plastic-to-brittle transition of saturated, alumina powder compacts. J. Am. Ceram. Soc. 79 (1996) 3161-3168
65. Franks G.V., and Lange F.F. Plastic flow of saturated, consolidated alumina powder compacts: particle size and binary mixtures. J. Am. Ceram. Soc. 82 (1999) 1595-1597
66. Franks G.V., and Lange F.F. Mechanical behavior of saturated, consolidated, alumina powder compacts: effect of particle size and morphology on the plastic-to-brittle transition. Colloid Surf. A: Physicochem. Eng. Aspects 146 (1999) 5-17
67. Franks G.V., and Lange F.F. Plastic clay-like flow stress of saturated advanced ceramic powder compacts. J. Eur. Ceram. Soc. 21 (2001) 893-899
68. Yu B.C., and Lange F.F. Colloidal isopressing: a new shape-forming method. Adv. Mater. 13 (2001) 276-280
69. Yu B.C., Biesheuvel P.M., and Lange F.F. Compact formation during colloidal isopressing. J. Am. Ceram. Soc. 85 (2002) 1456-1460
70. Velamakanni B.V., and Lange F.F. Effect of interparticle potentials and sedimentation of particle packing density of bimodal particle distributions durin pressure filtration. J. Am. Ceram. Soc. 74 (1991) 166-172
71. Velamakanni B.V., Lange F.F., Zok F.W., and Pearson D.S. Influence of interparticle forces on the rheological behavior of pressure-consolidated alumina particle slurries. J. Am. Ceram. Soc. 77 (1994) 216-220
72. Franks G.V., Colic M., Fisher M.L., and Lange F.F. Plastic-to-brittle transition of consolidated bodies: effect of counterion size. J. Colloid Interf. Sci. 193 (1997) 96-103
73. Hunter R.J. Foundations of Colloid Science (1987), Clarendon Press, Oxford
74. Lange F.F. Colloidal processing of powder for reliable ceramics. Curr. Opin. Solid State Mater. Sci. 3 (1998) 496-500
75. Lawn B. Fracture of Brittle Solids. 2nd ed. (1993), Cambridge University Press, Cambridge