메뉴 건너뛰기




Volumn 20, Issue 3, 2008, Pages 185-191

Three-dimensional biomimetic microchannel network by laser direct writing

Author keywords

Assist gas; Chemical etching; Laser direct writing; Nanosecond pulsed laser; PDMS replica

Indexed keywords

ABLATION; ACIDS; BIOMIMETICS; DEBRIS; ETCHING; FLOW VISUALIZATION; FLUID DYNAMICS; HYDROFLUORIC ACID; LASER ABLATION; LASERS; METAL MELTING; MICROCHANNELS; MOLTEN MATERIALS; NEODYMIUM LASERS; NITRIC ACID; OPTICAL WAVEGUIDES; RATE CONSTANTS; SILICON; SILICONES; THREE DIMENSIONAL; TISSUE ENGINEERING; WET ETCHING;

EID: 57049106292     PISSN: 1042346X     EISSN: None     Source Type: Journal    
DOI: 10.2351/1.2955485     Document Type: Article
Times cited : (28)

References (15)
  • 1
    • 1842866910 scopus 로고    scopus 로고
    • "Fabrication of microfluidic mixer and artificial vasculatures using a high-brightness diode-pumped Nd:YAG laser direct write method"
    • LCAHAM1473-0197
    • D. Lim, Y. Kamotani, B. Cho, J. Mazumder, and S. Takayama, "Fabrication of microfluidic mixer and artificial vasculatures using a high-brightness diode-pumped Nd:YAG laser direct write method," Lab Chip LCAHAM1473-0197 3, 318-323 (2003).
    • (2003) Lab Chip , vol.3 , pp. 318-323
    • Lim, D.1    Kamotani, Y.2    Cho, B.3    Mazumder, J.4    Takayama, S.5
  • 2
    • 0343932625 scopus 로고    scopus 로고
    • "Rapid prototyping of micromechanical devices using a Q-switched Nd:YAG laser with optional frequency doubling"
    • SEACDX0250-6874
    • S. Dauer, A. Ehlert, and S. Büttgenbach, "Rapid prototyping of micromechanical devices using a Q-switched Nd:YAG laser with optional frequency doubling," Sens. Actuators SEACDX0250-6874 76, 381-385 (1999).
    • (1999) Sens. Actuators , vol.76 , pp. 381-385
    • Dauer, S.1    Ehlert, A.2    Büttgenbach, S.3
  • 3
    • 2342501392 scopus 로고    scopus 로고
    • "Femtosecond laser micromachining: Current status and applications"
    • RIREE60919-3405
    • N. H. Rizvi, "Femtosecond laser micromachining: Current status and applications," RIKEN Rev.RIREE60919-3405 50, 107-112 (2003).
    • (2003) RIKEN Rev. , vol.50 , pp. 107-112
    • Rizvi, N.H.1
  • 4
    • 3042600829 scopus 로고    scopus 로고
    • "Liquid-assisted femtosecond laser drilling of straight and three-dimentional microchannels in glass"
    • APAMFC0947-839610.1007/s00339-004-2547-8
    • D. J. Hwang, T. Y. Choi, and C. P. Grigoropoulos, "Liquid-assisted femtosecond laser drilling of straight and three-dimentional microchannels in glass," Appl. Phys. A: Mater. Sci. Process. APAMFC0947-839610.1007/s00339-004-2547-8 79, 605-612 (2004).
    • (2004) Appl. Phys. A: Mater. Sci. Process. , vol.79 , pp. 605-612
    • Hwang, D.J.1    Choi, T.Y.2    Grigoropoulos, C.P.3
  • 5
    • 4344560198 scopus 로고    scopus 로고
    • "Three-dimensional microfluidic structure embedded in photostructurable glass by femtosecond laser for lab-on-chip applications"
    • APAMFC0947-8396
    • K. Sugioka, M. Masuda, T. Hongo, Y. Cheng, K. Shihoyama, and K. Midorikawa, "Three-dimensional microfluidic structure embedded in photostructurable glass by femtosecond laser for lab-on-chip applications," Appl. Phys. A: Mater. Sci. Process. APAMFC0947-8396 79, 815-817 (2004).
    • (2004) Appl. Phys. A: Mater. Sci. Process. , vol.79 , pp. 815-817
    • Sugioka, K.1    Masuda, M.2    Hongo, T.3    Cheng, Y.4    Shihoyama, K.5    Midorikawa, K.6
  • 6
    • 4344593980 scopus 로고    scopus 로고
    • "Femtosecond pulsed laser micromachining of glass substrates with application to microfluidic devices"
    • APOPAI0003-693510.1364/AO.43.004584
    • M. S. Giridhar, K. Seong, A. Schülzgen, P. Khulbe, N. Peyghambarian, and M. Mansuripur, "Femtosecond pulsed laser micromachining of glass substrates with application to microfluidic devices," Appl. Opt. APOPAI0003-693510.1364/AO.43.004584 43, 4584-4589 (2004).
    • (2004) Appl. Opt. , vol.43 , pp. 4584-4589
    • Giridhar, M.S.1    Seong, K.2    Schülzgen, A.3    Khulbe, P.4    Peyghambarian, N.5    Mansuripur, M.6
  • 7
    • 16644394389 scopus 로고    scopus 로고
    • "F2-laser microfabrication for integration optical circuits with microfluidic biochips"
    • PIEPSISDG0277-786X
    • H. Ho, J. S. Aitchison, S. Eaton, P. R. Herman, and J. Li, "F2-laser microfabrication for integration optical circuits with microfluidic biochips," Proc. S PIEPSISDG0277-786X 5591, 96-103 (2004).
    • (2004) Proc. S , vol.5591 , pp. 96-103
    • Ho, H.1    Aitchison, J.S.2    Eaton, S.3    Herman, P.R.4    Li, J.5
  • 8
    • 0042040751 scopus 로고    scopus 로고
    • 2-lasermicromachining and back-end processing for rapid production of PMMA-based microfluidic systems"
    • LCAHAM1473-019710.1039/b206409j
    • 2-laser micromachining and back-end processing for rapid production of PMMA-based microfluidic systems," Lab Chip LCAHAM1473-019710.1039/ b206409j 2, 242-246 (2002).
    • (2002) Lab Chip , vol.2 , pp. 242-246
    • Klank, H.1    Kutter, J.P.2    Geschke, O.3
  • 9
    • 12144279213 scopus 로고    scopus 로고
    • "Femtosecond versus nanosecond laser machining: Comparison of induced stresses and structural changes in silicon wafers"
    • ASUSEE0169-433210.1016/j.apsusc.2004.08.029
    • M. S. Amer, M. A. El-Sshry, L. R. Dosser, K. E. Hix, J. F. Maguire, and B. Irwin, "Femtosecond versus nanosecond laser machining: comparison of induced stresses and structural changes in silicon wafers," Appl. Surf. Sci. ASUSEE0169-433210.1016/ j.apsusc.2004.08.029 242, 162-167 (2005).
    • (2005) Appl. Surf. Sci. , vol.242 , pp. 162-167
    • Amer, M.S.1    El-Sshry, M.A.2    Dosser, L.R.3    Hix, K.E.4    Maguire, J.F.5    Irwin, B.6
  • 10
    • 33645138619 scopus 로고    scopus 로고
    • "High power DPSS laser micromachining of silicon and stainless steel"
    • Miami, FL (unpublished)
    • D. M. Karnakis, G. Rutterford, and M. R. H. Knowles, "High power DPSS laser micromachining of silicon and stainless steel," Proceedings of ICALEO, Miami, FL, 2005 (unpublished).
    • (2005) Proceedings of ICALEO
    • Karnakis, D.M.1    Rutterford, G.2    Knowles, M.R.H.3
  • 11
    • 10844278394 scopus 로고    scopus 로고
    • "Experimental investigation of ablation efficiency and plasma expansion during femtosecond and nanosecond laser ablation of silicon"
    • APAMFC0947-839610.1007/s00339-004-2963-9
    • X. Zeng, X. Mao, R. Greif, and R. E. Russo, "Experimental investigation of ablation efficiency and plasma expansion during femtosecond and nanosecond laser ablation of silicon," Appl. Phys. A: Mater. Sci. Process. APAMFC0947-839610.1007/s00339-004-2963-9 80, 237-241 (2005).
    • (2005) Appl. Phys. A: Mater. Sci. Process. , vol.80 , pp. 237-241
    • Zeng, X.1    Mao, X.2    Greif, R.3    Russo, R.E.4
  • 12
    • 0029541068 scopus 로고
    • "Fast 3D laser micromachining of silicon for micromechanical and microfluidic applications"
    • Stockholm, Sweden (unpublished)
    • M. Müllenborn, H. Dirac, J. W. Retersen, and S. Bouwstra, "Fast 3D laser micromachining of silicon for micromechanical and microfluidic applications," Proceedings of Transducers'95 Eurosensors IX, Stockholm, Sweden, 1995, pp. 166-169 (unpublished).
    • (1995) Proceedings of Transducers'95 Eurosensors IX , pp. 166-169
    • Müllenborn, M.1    Dirac, H.2    Retersen, J.W.3    Bouwstra, S.4
  • 13
    • 30344464715 scopus 로고    scopus 로고
    • "Bio-MEMS fabricated artificial capillaries for tissue engineering"
    • SJADAY1536-0040
    • G. J. Wang, C. L. Chen, S. H. Hsu, and Y. L. Chiang, "Bio-MEMS fabricated artificial capillaries for tissue engineering," SIAM J. Appl. Dyn. Syst. SJADAY1536-0040 12, 120-127 (2005).
    • (2005) SIAM J. Appl. Dyn. Syst. , vol.12 , pp. 120-127
    • Wang, G.J.1    Chen, C.L.2    Hsu, S.H.3    Chiang, Y.L.4
  • 14
    • 17144431774 scopus 로고    scopus 로고
    • "Endothelialized microvasculature based on a biodegradable elastomer"
    • TIENFP1076-327910.1089/ten.2005.11.302
    • C. Fidkowski, M. R. Kaazempur-Mofrad, J. Borenstein, J. P. Vacanti, R. Langer, and Y. Wang, "Endothelialized microvasculature based on a biodegradable elastomer," Tissue Eng. TIENFP1076-327910.1089/ ten.2005.11.302 11, No. 1/2, 302-309 (2005).
    • (2005) Tissue Eng. , vol.11 , Issue.1-2 , pp. 302-309
    • Fidkowski, C.1    Kaazempur-Mofrad, M.R.2    Borenstein, J.3    Vacanti, J.P.4    Langer, R.5    Wang, Y.6
  • 15
    • 0035984039 scopus 로고    scopus 로고
    • "Poly(dimethylsiloxane) as a material for fabricating microfluidic devices"
    • ACHRE40001-484210.1021/ar010110q
    • J. C. McDonald and G. M. Whitesides, "Poly(dimethylsiloxane) as a material for fabricating microfluidic devices," Acc. Chem. Res. ACHRE40001-484210.1021/ar010110q 35, 491-499 (2002).
    • (2002) Acc. Chem. Res. , vol.35 , pp. 491-499
    • McDonald, J.C.1    Whitesides, G.M.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.