Comparison of non-linear finite element stress analysis with in vitro strain gauge measurements on a morse taper implant

International Journal of Oral and Maxillofacial Implants

Volumn 18, Issue 2, 2003, Pages 258-265

  Iplikçioǧlu, Haldun ^a   Akça, Kivanç ^a,b   Çehreli, Murat C ^a   Şahin, Saime ^a  

^a HACETTEPE UNIVERSITY   (Turkey)

^b NONE   (Turkey)

Author keywords

Biomechanics; Dental implants; Finite element analysis; Strain gauge analysis

Indexed keywords

ARTICLE; BIOCHEMISTRY; CONTROLLED STUDY; FINITE ELEMENT ANALYSIS; HUMAN; IN VITRO STUDY; MEDICAL RECORD; STRAIN GAUGE TRANSDUCER; STRESS; TOOTH IMPLANTATION; VALIDATION PROCESS; COMPARATIVE STUDY; COMPRESSIVE STRENGTH; COMPUTER SIMULATION; DENTAL CARE; DENTURE; MECHANICAL STRESS; METHODOLOGY; TENSILE STRENGTH; WEIGHT BEARING;

ACRYLIC ACID RESIN;

ACRYLIC RESINS; COMPRESSIVE STRENGTH; COMPUTER SIMULATION; DENTAL ABUTMENTS; DENTAL IMPLANTS; DENTAL STRESS ANALYSIS; FINITE ELEMENT ANALYSIS; HUMANS; STRESS, MECHANICAL; TENSILE STRENGTH; WEIGHT-BEARING;

EID: 0038411346     PISSN: 08822786     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (40)

1. Brånemark P-I, Hansson BO, Adell R, et al. Osseointegrated implants in the treatment of the edentulous jaw: Experience from a ten-year period. Scand J Plastic Reconstr Surg 1977;11(suppl):1-132.
2. Adell R, Erikkson B, Lekholm U, Brånemark P-I, Jemt T. A long-term follow-up study of osseointegrated implants in the treatment of totally edentulous jaws. Int J Oral Maxillofac Implants 1990;5:347-359.
3. Jemt T, Lekholm U. Oral implant treatment in posterior partially edentulous jaws: A 5-year follow-up report. Int J Oral Maxillofac Implants 1993;8:635-640.
4. Buser D, Mericske-Stern R, Bernard J, et al. Long-term evaluation of non-submerged ITI implants. Part 1: 8-year life table analysis of a prospective multicenter study with 2,359 implants. Clin Oral Implants Res 1997;8:161-172.
5. Lekholm U, van Steenberghe D, Hermann I, et al. Osseointegrated implants in the treatment of partially edentulous jaws: A prospective 5-year multicenter study. Int J Oral Maxillofac Implants 1994;9:627-635.
6. Levine RA, Clem DS, Wilson TG, Higginbottom F, Solnit G. Multicenter retrospective analysis of the ITI implant system used for single-tooth replacements: Results of loading for 2 or more years. Int J Oral Maxillofac Implants 1999;14:516-520.
7. Esposito M, Hirsch J-M, Lekholm U, Thomsen P. Biological factors contributing to failures of osseointegrated oral implants (II) Etiopathogenesis. Eur J Oral Sci 1998;106:721-764.
8. Taylor TD, Agar JR, Vogiatzi T. Implant prosthodontics: Current perspective and future directions. Int J Oral Maxillofac Implants 2000;15:66-75.
9. Rangert B, Jemt T, Jörneus L. Forces and moments on Brånemark implants. Int J Oral Maxillofac Implants 1989;4:241-247.
10. Holmes DC, Loftus JT. Influence of bone quality on stress distribution for endosseous implants. J Oral Implantol 1997;23:104-111.
11. Hobkirk JA, Havthoulas TK. The influence of mandibular deformation, implant numbers, and loading position on detected forces in abutments supporting implant superstructures. J Prosthet Dent 1998;80:169-174.
12. Holmgren EP, Seckinger RJ, Kilgren LM, Mante F. Evaluating parameters of osseointegrated dental implants using finite element analysis - A two dimensional comparative study examining the effects of implant diameter, implant shape, and load direction. J Oral Implantol 1998;24:80-88.
13. Stegaroiu R, Sato T, Kusakari H, Miyakawa O. Influence of restoration type on stress distribution in bone around implants: A three-dimensional finite element stress analysis. Int J Oral Maxillofac Implants 1998;13:82-90.
14. Brånemark P-I, Svensson B, van Steenberghe D. Ten-year survival rates of fixed prostheses on four or six implants ad modum Brånemark in full edentulism. Clin Oral Implants Res 1995;6:227-231.
15. Duyck J, Van Oosterwyck H, Vander Sloten J, De Cooman M, Puers R, Naert I. Magnitude and distribution of occlusal forces on oral implants supporting fixed prostheses: An in vivo study. Clin Oral Implants Res 2000;11:465-475.
16. Lindström H. In Vivo Strain Gauge Measurement of Load on the Abutment of a Brånemark Dental Implant [thesis]. Göteborg: Chalmers University of Technology, 1998:1-14.
17. Krekmanov L, Kahn M, Rangert B, Lindström H. Tilting of posterior mandibular or maxillary implants for improved prosthesis support. Int J Oral Maxillofac Implants 2000;15:405-414.
18. Glantz P-O, Rangert B, Svensson A, et al. On clinical loading of osseointegrated implants. A methodological and clinical study. Clin Oral Implants Res 1993;4:99-105.
19. Glantz P-O, Nilner K. Biomechanical aspects of overdenture treatment. J Dent 1997;25:21-24.
20. Duyck J. Biomechanical Characterization of In Vivo Load on Oral Implants [thesis]. Leuven: Katholieke Universiteit Leuven, 2000:8-49.
21. Tan KBC. The clinical significance of distortion in implant prosthodontics: Is there such a thing as passive fit? Ann Acad Med Singapore 1995;24:138-157.
22. Sahin S, Cehreli MC. The significance of passive framework fit in implant prosthodontics: Current status. Implant Dent 2001;10:85-91.
23. Brosh T, Pilo R, Sudai D. The influence of abutment angulation on strains and stresses along the implant/bone interface: Comparison between two experimental techniques. J Prosthet Dent 1998;79:328-334.
24. Clelland NL, Gilat A, McGlumphy EA, Brantley WA. A photoelastic and strain gauge analysis of angled abutments for an implant system. Int J Oral Maxillofac Implants 1993;8:541-548.
25. Clelland NL, Lee JK, Bimbenet OC, Brantley WA. A three-dimensional finite element stress analysis of angled abutments for an implant placed in the anterior maxilla. J Prosthodont 1995;4:95-100.
26. White SN, Caputo AA, Anderkvist T. Effect of cantilever length on stress transfer by implant-supported prostheses. J Prosthet Dent 1994;71:493-499.
27. Smedberg JI, Nilner K, Rangert B, Svensson SA, Glantz P-O. On the influence of superstructure connection on implant preload: A methodological and clinical study. Clin Oral Implants Res 1996;7:55-63.
28. Baiamonte T, Abbate MF, Pizzarello F, Lozada J, James R. The experimental verification of the efficacy of finite element modelling to dental implant systems. J Oral Implantol 1996;22:104-110.
29. Keyak JH, Fourkas MG, Meagher JM, Skinner HB. Validation of an automated method of three-dimensional finite element modelling of bone. J Biomed Eng 1993;15:505-509.
30. Merz BR, Hunenbart S, Belser UC. Mechanics of the implant-abutment connection: An 8-degree taper compared to a butt joint connection. Int J Oral Maxillofac Implants 2000;15:519-526.
31. Clelland NL, Carr AB, Gilat A. Comparison of strains transferred to a bone simulant between as-cast and post-soldered implant frameworks for a five-implant-supported fixed prosthesis. J Prosthodont 1996;5:193-200.
32. Abkowitz S, Burke JJ, Hiltz RH. Titanium in Industry. New York: Van Nostrand, 1995.
33. Akça K, Iplikçioglu H. Finite element stress analysis of the influence of staggered versus straight placement of dental implants. Int J Oral Maxillofac Implants 2001;16:722-730.
34. Akca K, Cehreli MC, Iplikçioglu H. Comparison of three-dimensional finite element stress analysis with in-vitro strain gauge measurements on dental implants. Int J Prosthodont 2002;15:115-121.
35. Goodacre CJ, Kan JYK, Rungcharassaeng K. Clinical complications of osseointegrated implants. J Prosthet Dent 1999;81:537-552.
36. Schwarz MS. Mechanical complications of dental implants. Clin Oral Implants Res 2000;1:156-158.
37. Buser D, Mericske-Stern R, Dula K, Lang N. Clinical experience with one-stage, non-submerged dental implants. Adv Dent Res 1999;13:153-161.
38. Moberg LE, Kondell PA, Kullman L, Heimdahl A, Gynther G. Evaluation of single-tooth restorations on ITI dental implants. A prospective study of 29 patients. Clin Oral Implants Res 1999;10:45-53.
39. Mericske-Stern R, Grutter L, Rosch R, Mericske E. Clinical evaluation and prosthetic complications of single tooth replacements by non-submerged implants. Clin Oral Implants Res 2001;12:309-318.
40. Stanford CM, Brand RA. Toward an understanding of implant occlusion and strain adaptive bone modelling and remodelling. J Prosthet Dent 1998;81:553-561.