Nucleate boiling of FC-72 and HFE-7100 on porous graphite at different orientations and liquid subcooling

Energy Conversion and Management

Volumn 49, Issue 4, 2008, Pages 733-750

  El Genk, Mohamed S ^a   Parker, Jack L ^a  

^a University of New Mexico   (United States)

Author keywords

Critical heat flux; Dielectric liquids; Immersion cooling of electronics; Nucleate boiling; Nucleate boiling heat transfer coefficient; Porous graphite; Surface orientation

Indexed keywords

GRAPHITE; HEAT FLUX; HEAT TRANSFER; NUCLEATE BOILING;

POROUS GRAPHITE; SURFACE ORIENTATION;

DIELECTRIC LIQUIDS;

EID: 43049096451     PISSN: 01968904     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.enconman.2007.07.028     Document Type: Article

References (44)

1. Technical data sheets and data tables for saturated fluids. 3M Corporation; 2004.
2. Baumbach V. ZARM-University of Bremen, Am Fallturm, 28359 Bremen, Germany; 2006, personal communication, E-mail: baumbach@zarm.uni-bremen.de.
3. O'Connor JP. Enhancement of pool boiling heat transfer in highly-wetting dielectric liquids. PhD Dissertation. Arlington (TX): University of Texas at Arlington; 1994.
4. Chang J.Y., and You S.M. Heater orientation effects on pool boiling on micro-porous-enhanced surfaces in saturated FC-72. J Heat Transfer 118 (1996) 937-943
5. Chang J.Y., and You S.M. Boiling heat transfer phenomena from micro-porous and porous surfaces in saturated FC-72. Int J Heat Mass Transfer 40 (1997) 4437-4447
6. Chang J.Y., and You S.M. Enhanced boiling heat transfer from micro-porous surfaces: effects of a coating composition and method. Int J Heat Mass Transfer 40 (1997) 4449-4460
7. Rainey K.N., and You S.M. Pool boiling heat transfer from plan and microporous, square pin-finned surfaces in saturated FC-72. J Heat Transfer 122 (2000) 509-516
8. Rainey KN. Pool and flow boiling heat transfer from microporous flat and finned surfaces in FC-72. PhD Dissertation. Arlington (TX): University of Texas at Arlington; 2001.
9. Arik M., and Bar-Cohen A. Ebullient cooling of integrated circuits by Novec fluids. Proc IPACK 2001 (2001) 625-637
10. El-Genk M.S., and Bostanci H. Saturation boiling of HFE-7100 from a copper surface, simulating a microelectronic chip. Int J Heat Mass Transfer 46 (2003) 1841-1854
11. El-Genk M.S., and Bostanci H. Combined effects of subcooling and surface orientation on pool boiling of HFE-7100 from a simulated electronic chip. J Exp Heat Transfer 16 (2003) 281-301
12. Wei J.J., and Honda H. Effects of fin geometry on boiling heat transfer from silicon chips with micro-pin-fins immersed in FC-72. Int J Heat Mass Transfer 46 (2003) 4059-4070
13. Ghiu C.-D., and Joshi Y.K. Boiling performance of single-layered enhanced structures. J Heat Transfer 127 (2005) 675-683
14. Murthy S., Joshi Y., Gurrum S., and Nakayama W. Enhanced boiling heat transfer simulation from structured surfaces: semi-analytical model. Int J Heat Mass Transfer 49 (2006) 1885-1895
15. El-Genk M.S., and Parker J.L. Pool boiling in saturated and subcooled HFE-7100 dielectric fluid from a porous graphite surface. Proceedings of intersociety conference on thermal phenomena vol. 1 (2004) 655-662
16. El-Genk M.S., and Parker J.L. Pool boiling in saturated and subcooled FC-72 dielectric fluid from a porous graphite surface. Proceedings of the ASME Heat Transfer Division - 2004 375 (2004) 203-210
17. El-Genk M.S., and Parker J.L. Enhanced boiling of HFE-7100 dielectric liquid on porous graphite. J Energy Convers Manage 46 (2005) 2455-2481
18. Parker JL, El-Genk MS. Effect of inclination on pool boiling of FC-72 dielectric liquid on porous graphite. In: Proceedings of HT 2005: 2005 summer heat transfer conference, July 17-22, 2005, San Francisco (CA), HT2005-72289.
19. Parker J.L., and El-Genk M.S. Enhanced saturation and subcooled boiling of FC-72 dielectric liquid. Int J Heat Mass Transfer 48 (2005) 3736-3752
20. Parker J.L., and El-Genk M.S. Effect of surface orientation on nucleate boiling of FC-72 on porous graphite. J Heat Transfer 128 (2006) 1159-1175
21. Parker JL, El-Genk MS. Subcooled boiling of dielectric liquids on porous graphite at different orientations. In: Proceedings international heat transfer conference, August 13-18, 2006, Sydney, Australia, Paper no. BOI-36.
22. Huang G.-S., and Kaviany M. Critical heat flux in thin, uniform particle coatings. Int J Heat Mass Transfer 49 (2006) 844-849
23. Howard AH. Effects of orientation and downward facing convex curvature on pool boiling critical heat flux. PhD Dissertation. West Lafayette (IN): Purdue University; 1999.
24. Howard A.H., and Mudawar I. Orientation effects on pool boiling critical heat flux (CHF) and modeling of CHF for near-vertical surfaces. Int J Heat Mass Transfer 42 (1998) 1665-1688
25. Mudawar I., Howard A.H., and Gersey C.O. An analytical model for near-saturated pool boiling critical heat flux on vertical surfaces. Int J Heat Mass Transfer 40 (1997) 2327-2339
26. Jung J.-Y., and Kwak Ho.-Y. Effect of surface condition on boiling heat transfer from silicon chip with submicron roughness. Int J Heat Mass Transfer 49 (2006) 4543-4551
27. Nimkar N.D., Bhavnani S.H., and Jaeger R.C. Effect of nucleation site spacing on the pool boiling characteristics of a structured surface. Int J Heat Mass Transfer 49 (2006) 2829-2839
28. Yu C.K., Lu D.C., and Cheng T.C. Pool boiling heat transfer on artificial micro-cavity surfaces in dielectric fluid FC-72. J Micromech Microeng 16 (2006) 2092-2099
29. Rini D.P., Chen R.-H., and Chaw L.C. Bubble behavior and heat transfer mechanisms in FC-72 pool boiling. J Exp Heat Transfer 14 (2001) 27-44
30. Medavaram G.L., Bhavnani S.H., and Jaeger R.C. Ebullition characteristics of an isolated surface microstructure for immersion cooled heat sinks. IEEE Trans Compon Packag Technol 28 (2005) 263-271
31. Priarone A. Effect of surface orientation on nucleate boiling and critical heat flux of dielectric fluids. Int J Thermal Sci 44 (2005) 822-831
32. Rainey K.N., and You S.M. Effects of heater size and orientation on pool boiling heat transfer from microporous coated surfaces. Int J Heat Mass Transfer 44 (2001) 2589-2599
33. Nishikawa K., Fujita Y., Uchida S., and Haruhiko O. Effect of surface configuration on nucleate boiling heat transfer. Int J Heat Mass Transfer 27 (1984) 1559-1571
34. El-Genk M.S., and Guo S. Transient boiling from inclined and downward-facing surfaces in a saturated pool. Int J Refrig 16 (1993) 414-422
35. El-Genk M.S., Saber H.H., and Parker J.L. Efficient spreaders for cooling high performance computer chips. J Appl Thermal Eng 27 (2007) 1072-1088
36. Reed S.J., and Mudawar I. Enhancement of boiling heat transfer using highly wetting liquids with pressed-on fins at low contact forces. Int J Heat Mass Transfer 40 (1997) 2379-2392
37. Kutateladze S.S. Boiling heat transfer. Int J Heat Mass Transfer 4 (1961) 31-45
38. Honda H., Takamatsu H., and Wei J.J. Enhanced boiling of FC-72 on silicon chips with micro-pin-fins and submicron-scale roughness. J Heat Transfer 124 (2002) 383-390
39. McNiel A. Pool boiling critical heat flux in a highly wetting liquid. Masters Thesis. Minneapolis (MN): University of Minnesota; 1992.
40. Rainey K.N., You S.M., and Lee S. Effect of pressure, subcooling, and dissolved gas on pool boiling heat transfer from microporous surfaces in FC-72. J Heat Transfer 125 (2003) 75
41. Liu Z.W., Lin W.W., Lee D.J., and Peng X.F. Pool boiling of FC-72 and HFE-7100. J Heat Transfer 123 (2001) 399-400
42. Liu J.W., Lee D.J., and Su A. Boiling of methanol and HFE-7100 on heated surface covered with a layer of mesh. Int J Heat Mass Transfer 44 (2001) 241-246
43. Ivey HJ, Morris DJ. Critical heat flux of saturation and subcooled pool boiling in water at atmospheric pressure. In: Proceedings of the third international heat transfer conference, Chicago (IL), vol. 3. 1966. p. 129-42.
44. Watwe A.A., Bar-Cohen A., and McNeil A. Combined pressure and subcooling effects on pool boiling from a PPGA chip package. J Electron Packag 119 (1997) 95-105