State-of-the-art of simulation of sheet metal forming

Journal of Materials Processing Technology

Volumn 103, Issue 1, 2000, Pages 14-22

  Tekkaya, A Erman ^a  

^a MIDDLE EAST TECHNICAL UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER AIDED DESIGN; COMPUTER SIMULATION; FINITE ELEMENT METHOD; FRACTURE; INDUSTRIAL APPLICATIONS; METAL FORMING; VIRTUAL REALITY;

SHEET METAL FORMING; VIRTUAL PRODUCTION;

SHEET METAL;

EID: 0033731437     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0924-0136(00)00413-1     Document Type: Article

References (32)

1. Barlat F., Lege D.J., Brenz J.C. A 6-component yield function for anisotropic materials. Int. J. Plast. 7:1991;693-712.
2. J.L. Batoz, Y.Q. Guo, F. Mercier, The inverse approach including bending effects for the analysis and design of sheet metal forming parts, in: NUMIFORM'95, Balkema, Rotterdam, 1995, pp. 661-667.
3. T. Belytschko, R. Mullen, Explicit integration of structural problems, in: P. Bergan, et al. (Eds.), Finite Elements in Nonlinear Mechanics, 1977, Tapir, Trondheim, Norway, pp. 672-720.
4. Benson D.J., Hallquist J.O. A simple rigid body algorithm for structural dynamics programs. Int. J. Num. Meth. Eng. 22:1986;723-749.
5. B.D. Carleer, M.F.M. Louwes, J. Huetink, P.T. Vreede, Modelling drawbeads in 3D finite element simulations of the deep drawing process, in: NUMIFORM'95, Balkema, Rotterdam, 1995, pp. 681-685.
6. P.R. Dawson, A.J. Beaudoin, Simulating deformation-induced texture in metal forming, in: NUMIFORM'92, Balkema, Rotterdam, 1992, pp. 25-33.
7. Fourment L., Balan T., Chenot L. Optimal design for non-steady-state metal forming processes-II. Application of shape optimization in forging. Int. J. Num. Meth. Engg. 39:1996;51-65.
8. Gotoh M., Ishise F. A finite element analysis of rigid-plastic deformation of the flange in a deep-drawing process based on a fourth-degree yield function. Int. J. Mech. Sci. 20:1978;423-435.
9. M. Herrmann, Beitrag zur Berechnung von Vorgängen der Blechumformung mit der Methode der finiten Elemente, Dr.-Ing. Dissertation, Universität Stuttgart, 1990.
10. M. Herrmann, Was erwarten Kunden von einem Dienstleister im Bereich der Umformsimulation. In: Workshop Umformsimulation, Haus Lämmerbuckel, Wiesensteig, Germany, 28-29 April, 1997.
11. R. Hill, The Mathematical Theory of Plasticity, Clarendon Press, Oxford, 1950.
12. Hill R. A user-friendly theory of orthotropic plasticity in sheet metals. Int. J. Mech. Sci. 35:1993;19-25.
13. J. Huetink, A.H. Streppel, P.T. Vreede, Development and experimental verification of constitutive equations for anisotropic sheet metal, in: COMPLAS'95, Pineridge Press, Swansea, 1995, pp. 2271-2282.
14. K. Lange (Ed.), Lehrbuch der Umformtechnik. Band 3: Blechumformung, Springer, Berlin, 1975.
15. E. Massoni, et al., A finite element modelling for deep drawing of thin sheet in automotive industry, in: K. Lange (Ed.), Advanced Technology of Plasticity 1987, Vol. II, Berlin, 1987, pp. 719-725, ISBN 3-540-17915-1.
16. Müller W., Pöhlandt K. New experiments for determining yield loci of sheet metal. J. Mater. Process Technol. 60:1996;643-648.
17. E. Nakamachi, Elastic/Crystalline viscoplastic finite element analysis and optimum fabrication design of sheet metal, in: COMPLAS'97, Pineridge Press, Swansea, 1997, pp. 101-118.
18. N. Rebelo, J.C. Nagtegaal, L.M. Taylor, Comparison of implicit and explicit finite element methods in the simulation of forming processes, in: NUMIFORM'92, Balkema, Rotterdam, 1992, pp. 99-108.
19. K. Roll, Private Communication, Stuttgart, 1990.
20. K. Roll, A.E. Tekkaya, Numerische Verfahren der Prozeßsimulation in der Umformtechnik, in: K. Lange (Ed.), Umformtechnik, Handbuch für Industrie und Wissenschaft, Band 4, Springer, Berlin, 1993, pp. 330-435.
21. K. Roll, Simulationssysteme im Vergleich-Handlungsschwerpunkte für die Zukunft, in: 4. Sächsiche Fachtagung Umformtechnik, November 5-6, 1997, Chemnitz, pp. 315-334.
22. H.-D. Schacher, Entwicklungstendenzen in der Massivumformung für die Automobilindustrie, in: Seminarband Neuere Entwicklungen in der Massivumformung, Stuttgart, Germany, June 3-4, 1997.
23. K. Schweizerhof, J.O. Hallquist, Explicit integration schemes and contact formulations for thin sheet metal forming, in: FE-Simulation of 3D Sheet Metal Forming Processes in Automotive Industry, Vol. 894, VDI-Berichte, 1991, pp. 405-439.
24. S.C. Tang, E. Chu, S.K. Samanta, Finite element prediction of the deformed shape of an automotive body panel during preformed stage, in: NUMIFORM'82, Pineridge Press, Swansea, 1982, pp. 629-640.
25. A.E. Tekkaya, Complete numerical solution of the axisymmetrical deep-drawing problem, M.S. Thesis, Middle East Technical University, Ankara, 1980.
26. C.H. Toh, S. Kobayashi, Finite element process modelling of sheet metal forming of general shapes, In: Grundlagen der Umformtechnik I, Berlin, 1983, pp. 39-56, ISBN 3-540-13039-X.
27. Wang N.-M., Budiansky B. Analysis of sheet metal stamping by a finite-element method. Trans. ASME. J. Appl. Mech. 45:1978;73-82.
28. N.-M. Wang, M.L. Wenner, Elastic-viscoplastic analysis of simple stretch forming problems, in: D.P. Koistinen, N.-M. Wang (Eds.), Mechanics of Sheet Metal Forming, 1978, pp. 367-402.
29. M.L. Wenner, State-of-the-art of mathematical modelling of sheet metal forming of automotive body panels, in: Sheet Metal Stamping: Development Applications, SP-1221, Society of Automotive Engineering (SAE), 1997, pp. 1-6.
30. Wifi A.S. An incremental complete solution of the stretch-forming and deep-drawing of a circular blank using a hemispherical punch. Int. J. Mech. Sci. 18:1976;23-31.
31. Woo D.M. On the complete solution of the deep-drawing problem. Int. J. Mech. Sci. 10:1968;83-94.
32. H.-L. Xing, A. Makinouchi, 3D thermal-elastic-plastic FEM in finite deformation and its application to non-isothermal sheet forming, in: D.J. Owen, et al. (Eds.), Computational Plasticity, 1997, Pineridge Press, Swansea, UK, pp. 1445-1452.