A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness - Part II: Nonlinear applications

International Journal for Numerical Methods in Engineering

Volumn 67, Issue 2, 2006, Pages 160-188

  Alves de Sousa, Ricardo J ^a   Cardoso, Rui P R ^a   Fontes Valente, Robertt A ^a   Yoon, Jeong Whan ^a,b   Grácio, José J ^a   Natal Jorge, Renato M ^c  

^a UNIVERSITY OF AVEIRO   (Portugal)

^b ALCOA TECHNICAL CENTER   (United States)

^c UNIVERSITY OF PORTO   (Portugal)

Author keywords

Enhanced assumed strain method; Physical stabilization; Reduced integration; Solid shell element; Thin shell structure

Indexed keywords

DEFORMATION; ELASTOPLASTICITY; FINITE ELEMENT METHOD; INTEGRATION; KINEMATICS; STRAIN; TENSORS;

ENHANCED ASSUMED STRAIN METHOD; NONLINEAR KINEMATICS; PHYSICAL STABILIZATION; REDUCED INTEGRATION; SOLID-SHELL ELEMENT; THIN-SHELL STRUCTURE;

SHELLS (STRUCTURES);

DEFORMATION; ELASTOPLASTICITY; FINITE ELEMENT METHOD; INTEGRATION; KINEMATICS; SHELLS (STRUCTURES); STRAIN; TENSORS;

EID: 33745881363     PISSN: 00295981     EISSN: 10970207     Source Type: Journal    
DOI: 10.1002/nme.1609     Document Type: Article

References (63)

1. Simo JC, Rifai MS. A class of mixed assumed strain methods and the method of incompatible modes. International Journal for Numerical Methods in Engineering 1990; 29:1595-1638.
2. Fraeijs de Veubeke BM. Diffusion des inconnues hyperstatiques dans les voilures à longeron couples. Bull. Serv. Technique de L'Aéronautique No. 24. Imprimeríe Marcel Hayez: Bruxelles, 1951.
3. Alves de Sousa RJ, Cardoso RPR, Fontes Valente RA, Yoon JW, Grácio JJ, Natal Jorge RM. A new one-point quadrature enhanced assumed strain (EAS) solid-shell element with multiple integration points along thickness: Part I - geometrically linear applications. International Journal for Numerical Methods in Engineering 2004; 62:952-977.
4. Alves de Sousa RJ, Natal Jorge RM, Fontes Valente RA, César Sá JMA. Formulation of EAS solid elements for incompressibility and thin shell applications in non-linear range. Proceedings of COMPLAS VII - Seventh World Congress in Computational Plasticity 7-10 April 2003, Barcelona, Spain.
5. Alves de Sousa RJ, Natal Jorge RM, Fontes Valente RA, César Sá JMA. A new volumetric and shear locking-free EAS element. Engineering Computations 2003; 20:896-925.
6. Andelfinger U, Ramm E. EAS-Elements for 2D, 3D, plate and shell structures and their equivalence to HR-elements. International Journal for Numerical Methods in Engineering 1993; 36:1311-1337.
7. Betsch P, Stein E. Numerical implementation of multiplicative elasto-plasticity into assumed strain elements with application to shells at large strains. Computer Methods in Applied Mechanics and Engineering 1999; 179:215-245.
8. Bischoff M, Ramm E. Shear deformable shell elements for large strains and rotations. International Journal for Numerical Methods in Engineering 1997; 40:4427-4449.
9. Büchter N, Ramm E. Three-dimensional extension of a non-linear shell formulation based on the enhanced assumed strain concept. International Journal for Numerical Methods in Engineering 1994; 37:2551-2568.
10. César de Sá JMA, Natal Jorge RM. New enhanced strain elements for incompressible problems. International Journal for Numerical Methods in Engineering 1999; 44:229-248.
11. César de Sá JMA, Natal Jorge RM, Fontes Valente RA, Areias PMA. Development of shear locking-free shell elements using an enhanced assumed strain formulation. International Journal for Numerical Methods in Engineering 2002; 53:1721-1750.
12. de Borst R, Groen AE. Towards efficient and robust elements for 3D-soil plasticity. Computers and Structures 1999; 70:23-34.
13. Doll S, Schweizerhof K, Hauptmann R, Freischlager C. On volumetric locking of low-order solid and solid-shell elements for finite elastoviscoplastic deformations and selective reduced integration. Engineering Computations 2000; 17:874-902.
14. Eberlein R, Wriggers P. Finite element concepts for finite elastoplastic strains and isotropic stress response in shells: theoretical and computational analysis. Computer Methods in Applied Mechanics and Engineering 1999; 171:243-279.
15. Fontes Valente RA. Developments on shell and solid-shell finite elements technology in nonlinear continuum mechanics. Ph.D. Thesis, University of Porto, Portugal, 2004.
16. Fontes Valente RA, Alves de Sousa RJ, Natal Jorge RM. An enhanced strain 3D element for large deformation elastoplastic problems in thin-shell applications. Computational Mechanics 2004; 34:38-52.
17. Fontes Valente RA, Natal Jorge RM, Cardoso RPR, César de Sá JMA, Grácio JJA. On the use of an enhanced transverse shear strain shell element for problems involving large rotations. Computational Mechanics 2003; 30:286-296.
18. Fontes Valente RA, Natal Jorge RM, César Sá JMA, Gracio JJ. Enhanced transverse shear strain shell formulation applied to large elasto-plastic deformation problems. International Journal for Numerical Methods in Engineering 2005; 62:1360-1398.
19. Harnau M, Schweizerhof K. About linear and quadratic 'solid-shell' elements at large deformations. Computers and Structures 2002; 80:805-817.
20. Hauptmann R, Schweizerhof K. A systematic development of 'solid-shell' element formulations for linear and non-linear analyses employing only displacement degrees of freedom. International Journal for Numerical Methods in Engineering 1998; 42:49-69.
21. Hauptmann R, Schweizerhof K, Doll S. Extension of the 'solid-shell' concept for application to large elastic and large elastoplastic deformations. International Journal for Numerical Methods in Engineering 2000; 49:1121-1131.
22. Hauptmann R, Doll S, Harnau M, Schweizerhof K. Solid-shell elements with linear and quadratic shape functions at large deformations with nearly incompressible materials. Computers and Structures 2001; 79: 1671-1685.
23. Kasper EP, Taylor RL. A mixed-enhanced strain method: Part I - linear problems. Computers and Structures 2000; 75:237-250.
24. Klinkel S, Wagner W. A geometrical non-linear brick element based on the EAS method. International Journal for Numerical Methods in Engineering 1997; 40:4529-4545.
25. Klinkel S, Gruttman F, Wagner W. A continuum based 3D-shell element for laminated structures. Computers and Structures 1999; 71:43-62.
26. Korelc J. Symbolic approach in computational mechanics and its application to the enhanced strain method. Ph.D. Thesis, University of Darmstadt, Germany, 1996.
27. Puso MA. A highly efficient enhanced assumed strain physically stabilized hexahedral element. International Journal for Numerical Methods in Engineering 2000; 49:1029-1064.
28. Reese S. On a physically stabilized one point finite element formulation for three-dimensional finite elastoplasticity. Computer Methods in Applied Mechanics and Engineering 2005, in press.
29. Reese S. On the equivalence of mixed element formulations and the concept of reduced integration in large deformation problems. International Journal of Nonlinear Sciences and Numerical Simulation 2002; 3:1-33.
30. Reese S, Wriggers, P. A stabilization technique to avoid hourglassing in finite elasticity. International Journal for Numerical Methods in Engineering 2000; 48:79-109.
31. Reese S, Wriggers P, Reddy BD. A new locking-free brick element technique for large deformation problems in finite elasticity. Computers and Structures 2000; 75:291-304.
32. Reese S, Kussner M, Reddy BD. A new stabilization technique for finite elements in non-linear elasticity. International Journal for Numerical Methods in Engineering 1998; 44:1617-1652.
33. Rohel D, Ramm E. Large elasto-plastic finite element analysis of solids and shells with the enhanced assumed strain concept. International Journal of Solids and Structures 1996; 33:3215-3237.
34. Simo JC, Hughes TJR. Computational Inelasticity, Interdisciplinary Applied Mathematics. Springer: New York, 1998.
35. Simo JC, Armero F. Geometrically non-linear enhanced strain mixed methods and the method of incompatible modes. International Journal for Numerical Methods in Engineering 1992; 33:1413-1449.
36. Simo JC, Armero F, Taylor RL. Improved versions of assumed enhanced strain tri-linear elements for 3D finite deformation problems. Computer Methods in Applied Mechanics and Engineering 1993; 110: 359-386.
37. Vu-Quoc L, Tan XG. Optimal solid-shells for nonlinear analysis of multilayer composites. Part I: Statics. Computer Methods in Applied Mechanics and Engineering 2003; 192:975-1016.
38. Wriggers P, Eberlein R, Reese S. A comparison of three-dimensional continuum and shell elements for finite plasticity. International Journal of Solids and Structures 1996; 33:3309-3326.
39. Hughes TJR. Generalization of selective integration procedures to anisotropic and nonlinear media. International Journal for Numerical Methods in Engineering 1980; 15:1413-1418.
40. Hughes TJR, Cohen M, Haroun M. Reduced and selective integration techniques in finite element analysis of plates. Nuclear Engineering Design 1978; 46:203-222.
41. Zienkiewicz OC, Taylor RL, Too JM. Reduced integration technique in general analysis of plates and shells. International Journal for Numerical Methods in Engineering 1971; 3:275-290.
42. Belytschko T, Liu WK, Moran B. Nonlinear Finite Elements for Continua and Structure. Wiley: West Sussex, England, 2000.
43. Liu WK, Guo Y, Tang S, Belytschko T. A multiple-quadrature eight-node hexahedral finite element for large deformation elastoplastic analysis. Computer Methods in Applied Mechanics and Engineering 1998; 154:69-132.
44. Masud A, Tham CL, Liu WK. A stabilized 3D co-rotational formulation for geometrically nonlinear analysis of multi-layered composite shells. Computational Mechanics 2001; 26:1-12.
45. Legay A, Combescure A. Elastoplastic stability analysis of shells using the physically stabilized finite element SHB8PS. International Journal for Numerical Methods in Engineering 2003; 57:1299-1322.
46. Miehe C, Apel N. Anisotropic elastic-plastic analysis of shells at large strains. A comparison of multiplicative and additive approaches to enhanced finite element design and constitutive modeling. International Journal for Numerical Methods in Engineering 2004; 61:1977-2181.
47. Cardoso RPR. Development of one point quadrature shell elements with anisotropic material models for sheet metal forming analysis. Ph.D. Thesis, University of Aveiro, Portugal.
48. Cardoso RPR, Yoon JW. One point quadrature shell elements for sheet metal forming analysis. Archives of Computational Methods in Engineering 2005; 12:3-66.
49. Cardoso RPR. Yoon JW. One point quadrature shell element with through-thickness stretch. Computer Methods in Applied Mechanics and Engineering 2005; 194:1161-1199.
50. Cardoso RPR, Yoon JW, Grácio JJ, Barlat F, César Sá JMA. Development of a one point quadrature shell element for nonlinear application with contact and anisotropy. Computer Methods in Applied Mechanics and Engineering 2002; 191:5177-5206.
51. Miehe C. A theoretical and computational model for isotropic elastoplastic stress analysis in shells at large strains. Computer Methods in Applied Mechanics and Engineering 1998; 155:193-233.
52. Bathe KJ. Finite Element Procedures. Prentice-Hall: Englewood Cliffs, NJ, 1996.
53. Vu-Quoc L, Tan XG. Optimal solid shells for nonlinear analyses of multilayer composites. Part II: Dynamics. Computer Methods in Applied Mechanics and Engineering 2003; 192:1017-1059.
54. Tan XG, Vu-Quoc L. Efficient and accurate multilayer solid-shell element: nonlinear materials at finite strain. International Journal for Numerical Methods in Engineering 2005; 63-2124-2170.
55. Hughes TJR. The Finite Element Method: Linear Static and Dynamic Finite Element Analysis (2nd edn). Dover Editions: New Jersey, 2000.
56. Yoon JW, Yang DY, Chung K. Elasto-plastic finite element method based on incremental deformation theory and continuum based shell elements for planar anisotropic sheet materials. Computer Methods in Applied Mechanics and Engineering 1999; 174:23-175.
57. Cardoso RPR. CEREBRO - Finite Element Analysis Software. License ASSOFT no. 1169/d/04.
58. Brank B, Peric D, Damjanic FB. On implementation of a nonlinear four node shell finite element for thin multilayered elastic shells. Computational Mechanics 1995; 16:341-359.
59. Horrigmoe G, Bergan PG. Nonlinear analysis of freeform shells by flat finite elements. Computer Methods in Applied Mechanics and Engineering 1978; 16:11-35.
60. Simo, JC, Fox DD, Rifai MS. On a stress resultant geometrically exact shell model. Computer Methods in Applied Mechanics and Engineering 1989; 73:53-92.
61. NUMISHEET'02 organizing committee. Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, Jeju Island, Korea, 2002.
62. El-Abbasi N, Meguid SA. A new shell element accounting for through-thickness deformation. Computer Methods in Applied Mechanics and Engineering 2000; 189:841-862.
63. Li KP, Cescotto S. An 8-node brick element with mixed formulation for large deformation analyses. Computer Methods in Applied Mechanics and Engineering 1997; 141:157-204.