Developments in modelling of metal cutting processes

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications

Volumn 221, Issue 4, 2007, Pages 197-211

  Soo, S L ^a   Aspinwall, D K ^a  

^a UNIVERSITY OF BIRMINGHAM   (United Kingdom)

Author keywords

Finite element modelling; Machining; Three dimensional

Indexed keywords

BOUNDARY CONDITIONS; DRILLING; FINITE ELEMENT METHOD; MILLING (MACHINING); STRAIN RATE; THREE DIMENSIONAL;

FINITE ELEMENT MODELLING; MICROSCALE CUTTING; NON-CONVENTIONAL PROCESSES;

METAL CUTTING;

EID: 36749033686     PISSN: 14644207     EISSN: None     Source Type: Journal    
DOI: 10.1243/14644207JMDA163     Document Type: Article

References (95)

1. Tay, A. O-, Stevenson, M. G., and de Vahl Davis, G. Using the finite element method to determine temperature distributions in orthogonal machining. Proc. Instn Mech. Engrs, 1974, 188(55), 627-638.
2. Piispanen,V. Theory of formation of metal chips. J. Appl. Phys., 1948, 19, 876-881.
3. Shaw, M. C. Metal cutting principles, 1984 (Oxford Science Publications, New York).
4. Kalpakjian, S. K. Manufacturing engineering and technology, 3rd edition, 1995 (Addison-Wesley Publishing, Reading, MA).
5. Merchant, M. E. Mechanics of the metal cutting process II: plasticity conditions in orthogonal cutting. J. Appl. Phys., 1945, 16, 318-324.
6. Merchant, M. E. Basic mechanics of the metal cutting process. J. Appl. Mech., 1944, 11, A168-A175.
7. Merchant, M. E. Mechanics of metal cutting process 1. Orthogonal cutting and type 2 chip. J. Appl. Phys., 1945, 16(5), 267-275.
8. Trent, E. M. and Wright, P. K. Metal cutting, 4th edition, 2000 (Butterworth Heinemann, Boston, MA).
9. Oxley, P. L. B. An analysis for orthogonal cutting with restricted tool-chip contact. Int. J. Mech. Sci., 1962, 4, 129-135.
10. Oxley, P. L. B. A strain-hardening solution for the 'shear angle' in orthogonal metal cutting. Int. J. Mech. Sci., 1961, 3, 68-79.
11. Oxley, P. L. B. and Welsh, M. J. M. Calculating the shear angle in orthogonal metal cutting from fundamental stress-strain-strain rate properties of the work material. In Proceedings of the 4th International Machine Tool Design and Research Conference, 1963, pp. 73-86.
12. Oxley, P. L. B. Mechanics of machining: an analytical approach to assessing machinability, 1989 (Ellis Horwood Ltd, Chichester, UK).
13. Trigger, K. J. and Chao, B. T. An analytical evaluation of metal-cutting temperatures. Trans. ASME, 1951, 73, 57-65.
14. Boothroyd, G. Temperatures in orthogonal metal cutting. Proc. Instn Mech. Engrs, 1963, 177(29), 789-802.
15. Hou, Z. B. and Komanduri, R. Modelling of thermomechanical shear instability in machining. Int. J. Mech. Sci., 1997, 39(11), 1273-1314.
16. Athavale, S. M. and Strenkowski, J. S. Finite element modeling of machining: from proof-of-concept to engineering applications. In Proceedings of the CIRP International Workshop on Modeling of Machining Operations, Atlanta, USA, May 1998, pp. 203-216.
17. Childs, T. H. C., Maekawa, K., Obikawa, T., and Yamane, Y. Metal machining, theory and applications, 2000 (Arnold Publishers, London, UK).
18. Movahhedy, M., Gadala, M. S., and Altintas, Y. Simulation of the orthogonal metal cutting process using an arbitrary Lagrangian-Eulerian finite-element method. J. Mater. Process. Technol., 2000, 103, 267-275.
19. Carroll, J. T. III and Strenkowski, J. S. Finite element models of orthogonal cutting with application to single point diamond turning. J. Mech. Sci., 1988, 30(12), 899-920.
20. Strenkowski, J. S. and Moon, K. J. Finite element prediction of chip geometry and tool-workpiece temperature distribution in orthogonal metal cutting. Trans. ASME, J. Eng. Ind., 1990, 112, 313-318.
21. Strenkowski, J. S. and Athavale, S. M. A partially constrained Eulerian orthogonal cutting model for chip control tools. Trans. ASME, J. Manuf. Sci. Eng., 1997, 119, 681-688.
22. Kim, K. W. and Sin, H.-C. Development of a thermo-viscoplastic cutting model using finite element method. Int. J. Mach. Tools Manuf, 1996, 36(3), 379-397.
23. Leopold, J. FEM modeling and simulation of 3-D chip formation. In Proceedings of the CIRP International Workshop on Modeling of Machining Operations, Atlanta, USA, 1998, pp. 235-245.
24. Shet, C. and Deng, X. Finite element analysis of the orthogonal metal cutting process. J. Mater. Process. Technol., 2000, 105, 95-109.
25. Shih, A. J. Finite element analysis of the rake angle effects in orthogonal metal cutting. Int. J. Mach. Tools Manuf, 1996, 38(1), 1-17.
26. Komvopoulos, K. and Erpenbeck, S. A. Finite element modeling of orthogonal metal cutting. Trans. ASME, J. Eng. Ind., 1991, 113, 253-267.
27. Strenkowski, J. S. and Carroll, J. T. III A finite element model of orthogonal metal cutting. Trans. ASME, J. Eng. Ind., 1985, 107, 349-354.
28. Ceretti, E. FEM Simulations of segmented chip formation in orthogonal cutting: further improvements. Proceedings of the CIRP International Workshop on Modeling of Machining Operations, Atlanta, USA, 1998, pp. 257-263.
29. Ng, E.-G. and Aspinwall, D. K. Modelling of hard part machining. J. Mater. Process. Technol., 2002, 127, 222-229.
30. Marusich, T. D. and Ortiz, M. Modeling and simulation of high speed machining. Int. J. Numer. Methods Eng., 1995, 38, 3675-3694.
31. Wang, J. and Ga dala, M. S. Formulation and survey of ALE method in nonlinear solid mechanics. Finite Elem. Anal. Des., 1997, 24, 253-269.
32. Gadala, M. S., Movahhedy, M. R., and Wang, J. On the mesh motion for ALE modeling of metal forming processes. Finite Elem. Anal. Des., 2002, 38, 435-459.
33. Movahhedy, M. R., Altintas, Y., and Gadala, M. S. Numerical analysis of metal cutting with chamfered and blunt tools. Trans. ASME, J. Manuf. Sci. Eng., 2002, 124, 178-188.
34. Joyot, P., Rakotomalala, R., Pantale, O., Touratier, M., and Hakem, N. A numerical simulation of steady state metal cutting. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 1998, 122, 331-341.
35. Olovsson, L., Nilsson, L., and Simonsson, K. An ALE formulation for the solution of two-dimensional metal cutting problems. Comput. Struct., 1999, 72, 497-507.
36. Liang, R. and Khan, A. S. A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures. Int. J. Plast., 1999, 15, 963-980.
37. Lei, S., Shin, Y. C., and Incropera, F. P. Material constitutive modeling under high strain rates and temperatures through orthogonal machining tests. Trans. ASME, J. Manuf. Sci. Eng., 1999, 121, 577-585.
38. Hibbitt, Karlsson & Sorenson, Inc. ABAQUS theory manual, version 5.8, 1998, USA.
39. Johnson, G. R. and Cook, W. H. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In Proceedings of the 7th International Symposium on Ballistics, The Hague, Netherlands, 1983, pp. 541-547.
40. Childs, T. H. C. Material property needs in modelling metal machining. Mach. Sci. Technol., 1998, 2(2), 303-316.
41. Soo, S. L., Aspinwall, D. K., and Dewes, R. C. 3D FE modelling of the cutting of Inconel 718. J. Mater. Process. Technol., 2004, 150, 116-123.
42. Gray, G. T. III Classic split-Hopkinson pressure bar testing. In ASM International metals handbook, mechanical testing and evaluation, 10th edition, vol. 8, 2000 (ASM International, Metals Park, OH).
43. Shi, J. and Liu, C. R. The influence of material models on finite element simulation of machining. Trans. ASME, J. Manuf. Sci. Eng., 2004, 126, 849-857.
44. Umbrello, D., M'Saoubi, R., and Outeiro, J. C. The influence of Johnson-Cook material constants on finite element simulation of machining of AISI 316L steel. Int. J. Mach. Tools Manuf., 2007, 47, 462-470.
45. Xie, J. Q., Bayoumi, A. E., and Zbib, H. M. FEA modeling and simulation of shear localized chip formation in metal cutting. Int. J. Mach. Tools Manuf, 1998, 38, 1067-1087.
46. Liu, C. R. and Guo, Y. B. Finite element analysis of the effect of sequential cuts and tool-chip friction on residual stresses in a machined layer. Int. J. Mech. Sci., 2000, 42, 1069-1086.
47. Sasahara, H., Obikawa, T., and Shirakashi, T. FEM analysis of cutting sequence effect on mechanical characteristics in machined layer. J. Mater. Process. Technol., 1996, 62, 448-453.
48. Zhang, L. On the separation criteria in the simulation of orthogonal metal cutting using the finite element method. J. Mater. Process. Technol., 1999, 89-90, 273-278.
49. Ceretti, E., Fallbohmer, P., Wu, W. T., and Altan, T. Application of 2D FEM to chip formation in orthogonal cutting. J. Mater. Process. Technol., 1996, 59, 169-180.
50. Ng, E. G. Modelling of the cutting process when machining hardened steel with polycrystalline cubic boron nitride (PCBN) tooling. PhD Thesis, School of Manufacturing and Mechanical Engineering, University of Birmingham, 2001.
51. Marusich, T. D. and Ortiz, M. Simulation of chip formation in high-speed machining. In Proceedings of the 1995 Joint ASME Applied Mechanics and Materials Conference, Machining of Advanced Materials, AMD, 1995, vol. 208, pp. 127-139.
52. Obikawa, T., Sasahara, H., Shirakashi, T., and Usui, E. Application of computational machining method to discontinuous chip formation. Trans. ASME, J. Manuf. Sci. Eng., 1997, 119, 667-674.
53. Ceretti, E., Lucchi, M., and Altan, T. FEM simulation of orthogonal cutting: serrated chip formation. J. Mater. Process. Technol., 1999, 95, 17-26.
54. Hua, J. and Shivpuri, R. Influence of crack mechanics on the chip segmentation in the machining of Ti-6Al-4V. In Proceedings of the 9th ISPE International Conference on Concurrent Engineering, Cranfield, UK, 2002, pp. 357-365.
55. Usui, E. and Takeyama, H. A photoelastic analysis of machining stresses. Trans. ASME, J. Eng. Ind., 1960, 82, 303-308.
56. Ozel, T. The influence of friction models on finite element simulations of machining. Int. J. Mach. Tools Manuf., 2006, 46, 518-530.
57. Mamalis, A. G., Horvath, M., Branis, A. S., and Manolakos, D. E. Finite element simulation of chip formation in orthogonal metal cutting. J. Mater. Process. Technol., 2001, 110, 19-27.
58. Dirikolu, M. H., Childs, T. H. C., and Maekawa, K. Finite element simulation of chip flow in metal machining. Int. J. Mech. Sci., 2001, 43, 2699-2713.
59. Li, K., Gao, X.-L., and Sutherland, J. W. Finite element simulation of the orthogonal metal cutting process for qualitative understanding of the effects of crater wear on the chip formation process. J. Mater. Process. Technol., 2002, 127, 309-324.
60. Ko, D. C., Ko, S. L., and Kim, B. M. Rigidthermoviscoplastic finite element simulation of non-steady-state orthogonal cutting. J. Mater. Process. Technol., 2002, 130-131, 345-350.
61. Shi, G., Deng, X., and Shet, C. A finite element study of the effect of friction in orthogonal metal cutting. Finite Elem. Anal. Des., 2002, 38, 863-883.
62. Lei, S., Shin, Y. C., and Incropera, F. P. Thermomechanical modeling of orthogonal machining process by finite element analysis. Int. J. Mach. Tools Manuf., 1999, 39, 731-750.
63. Ng, E. G., Aspinwall, D. K., Brazil, D., and Monaghan, J. Modelling of temperature and forces when orthogonally machining hardened steel. Int. J. Mach. Tools Manuf., 1999, 39, 885-903.
64. Chandrasekaran, H. and Thuvander, A. Modeling tool stresses and temperature evaluation in turning using finite element method. Mach. Sci. Technol., 1998, 2(2), 355-367.
65. Monaghan, J. and MacGinley, T. Modelling the orthogonal machining process using coated carbide cutting tools. Comput. Mater. Sci., 1999, 16, 275-284.
66. MacGinley, T. and Monaghan, J. Modelling the orthogonal machining process using coated cemented carbide cutting tools. J. Mater. Process. Technol., 2001, 118, 293-300.
67. Guo, Y. B. and Yen, D. W. A FEM study on mechanisms of discontinuous chip formation in hard machining. J. Mater. Process. Technol., 2004, 155-156, 1350-1356.
68. Owen, D. R. J. and Vaz, M. Jr Computational techniques applied to high-speed machining under adiabatic strain localization conditions. Comput. Methods Appl. Mech. Eng., 1999, 171, 445-461.
69. Baker, M., Rosler, J., and Siemers, C. Finite element simulation of segmented chip formation of Ti6Al4V. Trans. ASME, J. Manuf. Sci. Eng., 2002, 124, 485-488.
70. Bäker, M., Rosler, J., and Siemers, C. The influence of thermal conductivity on segmented chip formation. Comput. Mater. Sci., 2003, 26, 175-182.
71. Maekawa, K., Ohhata, H., Kitagawa, T., and Childs, T. H. C. Simulation analysis of machinability of leaded CrMo and Mn-B structural steels. J. Mater. Process. Technol., 1996, 62, 363-369.
72. Li, R. and Shih, A. J. Finite element modelling of 3D turning of titanium. Int. J. Adv. Manuf. Technol., 2006, 29, 253-261.
73. Guo, Y. B. and Dornfeld, D. A. Finite element modeling of burr formation process in drilling 304 stainless steel. Trans. ASME, J. Manuf Sci. Eng., 2000, 122, 612-619.
74. Bacaria, J.-L., Dalverny, O., and Caperaa, S. A three-dimensional transient numerical model of milling. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 2001, 215(B8), 1147-1150.
75. Soo, S. L. 3D modelling when high speed end milling Inconel 718 superalloy. PhD Thesis, University of Birmingham, 2003.
76. Miller, S. F. and Shih, A. J. Thermo-mechanical finite element modeling of the friction drilling process. Trans. ASME, J. Manuf Sci. Eng., 2007, 129, 531-538.
77. Salio, M., Berruti, T., and De Poli, G. Prediction of residual stress distribution after turning in turbine disks. Int. J. Mech. Sci., 2006, 48, 976-984.
78. Hua, J., Shivpuri, R., Cheng, X., Bedekar,V., Matsumoto, Y., Hashimoto, F., and Watkins, T. R. Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer+ hone cutting edge geometry. Mater. Sci. Eng., 2005, A394, 238-248.
79. Nasr, M. N. A., Ng, E.-G., and Elbestawi, M. A. Modelling the effects of tool-edge radius on residual stresses when orthogonal cutting AISI 316L. Int. J. Mach. Tools Manuf., 2007, 47, 401-411.
80. Ee, K. C., Dillon, O. W. Jr, and Jawahir, I. S. Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius. Int. J. Mech. Sci., 2005, 47, 1611-1628.
81. Zong, W. J., Sun, T., Li, D., Cheng, K., and Liang, Y. C. FEM optimization of tool geometry based on the machined near surface's residual stresses generated in diamond turning. J. Mater. Process. Technol., 2006, 180, 271-278.
82. Chuzhoy, L., Devor, R. E., Kapoor, S. G., and Bammann, D. J. Microstructure-level modelling of ductile iron machining. Trans. ASME, J. Manuf. Sci. Eng., 2002, 124(2), 162-169.
83. Simoneau, A., Ng, E., and Elbestawi, M. A. Modeling the effects of microstructure in metal cutting. Int. J. Mach. Tools Manuf, 2007, 47, 368-375.
84. Pramanik, A., Zhang, L. C., and Arsecularatne, J. A. An FEM investigation into the behaviour of metal matrix composites: tool-particle interaction during orthogonal cutting. Int. J. Mach. Tools Manuf., 2007, 47, 1497-1506.
85. Arola, D. and Ramulu, M. Orthogonal cutting of fiber-reinforced composites: a finite element analysis. Int. J. Mech. Sci., 1997, 39, 597-613.
86. Mahdi, M. and Zhang, L. A finite element model for the orthogonal cutting of fiber-reinforced composite materials. J. Mater. Process. Technol., 2001, 113, 373-377.
87. Arola, D., Sultan, M. B., and Ramulu, M. Finite element modeling of edge trimming fiber reinforced plastics. Trans. ASME, J. Manuf. Sci. Eng., 2002, 124, 32-41.
88. Venu Gopala Rao, G., Mahajan, P., and Bhatnagar, N. Micro-mechanical modeling of machining of FRP composites - cutting force analysis. Compos. Sci. Technol., 2007, 67, 579-593.
89. Tian, Y. and Shin, Y. C. Multiscale finite element modeling of silicon nitride ceramics undergoing laser-assisted machining. Trans. ASME, J. Manuf. Sci. Eng., 2007, 129, 287-295.
90. Chae, J., Park, S. S., and Freiheit, T. Investigation of micro-cutting operations. Int. J. Mach. Tools Manuf., 2006, 46, 313-332.
91. Simoneau, A., Ng, E., and Elbestawi, M. A. Chip formation during microscale cutting of a medium carbon steel. Int. J. Mach. Tools Manuf, 2006, 46, 467-481.
92. Liu, X., Devor, R. E., Kapoor, S. G., and Ehmann, K. F. The mechanics of machining at the microscale: assessment of the current state of the science. Trans. ASME, J. Manuf. Sci. Eng., 2004, 126(4), 666-676.
93. Marafona, J. and Chousal, J. A. G. A finite element model of EDM based on the Joule effect. Int. J. Mach. Tools Manuf., 2006, 46, 595-602.
94. Bhondwe, K. L., Yadava, V., and Kathiresan, G. Finite element prediction of material removal rate due to electro-chemical spark machining. Int. J. Mach. Tools Manuf, 2006, 46, 1699-1706.
95. BiI, H., Kilic, S. E., and Tekkaya, A. E. A comparison of orthogonal cutting data from experiments with three different finite element models. Int. J. Mach. Tools Manuf., 2004, 44, 933-944.