Self-healing: A new paradigm in materials design

Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering

Volumn 221, Issue 4, 2007, Pages 479-495

  Kessler, M R ^a  

^a Iowa State University of Science and Technology   (United States)

Author keywords

Autonomic; Polymer matrix composites; Repair; Self healing; Self repairing

Indexed keywords

FUNCTION EVALUATION; POLYMER MATRIX COMPOSITES; REPAIR; STRUCTURAL ANALYSIS;

SELF-HEALING; SELF-REPAIRING;

FAILURE ANALYSIS;

EID: 34848813849     PISSN: 09544100     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544100JAERO172     Document Type: Article

References (141)

1. Nairn, J. A. Matrix microcracking in composites. In Polymer matrix composites (Eds R. Talreja and J.-A. E. Månson), in Comprehensive composite materials, 2000, vol. 2, pp. 403-432 (Elsevier Science, Amsterdam).
2. Talreja, R. Damage development in composites: mechanisms and modelling. J. Strain Analysis, 1989, 24, 215-222.
3. Talreja, R. (Ed.) Damage mechanics of composite materials, 1994 (Elsevier Press, New York).
4. Gamstedt, E. K. and Talrega, R. Fatigue damage mechanisms in unidirectional carbon-fibre-reinforced plastics. J. Mater. Sci., 1999, 34, 2535-2546.
5. Hollaway, L. Polymer composites for civil and structural engineering, 1993 (Blackie Academic and Professional, an imprint of Chapman and Hall, London)
6. Lui, K., Ferguson, S., and Measure, R. M. Damage determining in composites with embedding fiber optic interferometric sensors. Proc. SPIE - Int. Soc. Opt. Eng., 1989, 1170, 205-210.
7. Fernando, G. F. Fibre optic sensor systems for monitoring composite structures. Reinf. Plast., 2005, 49(11), 41-49.
8. Poland, S. H., May, R. G., Murphy, K. A., Claus, R. O., Tran, T. A., and Miller, M. S. Methods for integrating optical fibers with advanced aerospace materials. Proc. SPIE - Int. Soc. Opt. Eng., 1993, 1918, 122-130.
9. Zhou, G. and Sim, L. M. Damage detection and assessment in fibre-reinforced composite structures with embedded fibre optic sensors-review. Smart Mater. Struct., 2002, 11(6), 925-939.
10. Okabe, Y., Tsuji, R., and Takeda, N. Application of chirped fiber Bragg grating sensors for identification of crack locations in composites. Compos. A, Appl. Sci. Manuf, 2004, 35(1), 59-65.
11. Liu, T., Veidt, M., and Kitipornchai, S. Modelling the input-output behaviour of piezoelectric structural health monitoring systems for composite plates. Smart Mater. Struct., 2003, 12(5), 836-844.
12. Giurgiutiu, V., Jichi, F., Berman, J. B., and Kamphaus, J. M. Theoretical and experimental investigation of magnetostrictive composite beams. Smart Mater. Struct., 2001, 10(5), 934-945.
13. Hollaway, L. Polymer composites for civil and structural engineering, 1993 (Blackie Academic and Professional, an imprint of Chapman and Hall, London).
14. Armstrong, K. B., Bevan, G. L., and Cole, W. F. Care and repair of advanced composites, 2005 (SAE International, Warrendale, PA).
15. Heslehurst, R. B. Challenges in the repair of composite structures - Part I. SAMPE J., 1997, 33(5), 11-16.
16. Heslehurst, R. B. Challenges in the repair of composite structures - Part II. SAMPE J., 1997, 33(6), 16-21.
17. Liu, D., Lee, C. Y., and Lu, X. Repairability of impact-induced damage in SMC composites. J. Compos. Mater., 1993, 27(13), 1257-1270.
18. Mahler, M. and Hahn, H. T. Repair methods for composite structures. Eighth Japan-U.S. Conference on Composite materials, Baltimore, MD, USA, 24-25 September 1998, pp. 53-62 (Technomic Publishing Co., Inc., Lancaster, PA).
19. Russell, A. J. and Bowers, C. P. Resin requirements for successful repair of delaminations. 36th International SAMPE Symposium, San Diego, CA, USA, 15-18 April 1991, pp. 2279-2291.
20. Dehm, S. and Wurzel, D. Fast in-situ repair of aircraft panel components. J. Aircr., 1989, 26(5), 476-481.
21. Heslehurst, R. B. Repair of delamination damage - a simplified approach. Int. SAMPE Symp. Exhib., 1996, 41(2), 915-924.
22. Suchar-Buell, K. J. Structural repair of composites. Polym. Polym. Compos., 1993, 1(4), 297-308.
23. Zhou, B. L. Some progress in the biomimetic study of composite materials. Mater. Chem. Phys., 1996, 45(2), 114-119.
24. Weiner, S. and Wagner, H. D. The material bone: structure-mechanical function relations. Annu. Rev. Mater. Sci., 1998, 28, 271-298.
25. Brown, E. N., Sottos, N. R., and White, S. R. Fracture testing of a self-healing polymer composite. Expl Mech., 2002, 42(4), 372-377.
26. Maes, C., Coenegrachts, L., Stockmans, I., Daci, E., Luttun, A., Petryk, A., Gopalakrishnan, R., Moermans, K., Smets, N., Verfaillie, C. M., Carmeliet, P., Bouillon, R., and Carmeliet, G. Placental growth factor mediates mesenchymal cell development, cartilage turnover, and bone remodeling during fracture repair. J. Clin. Invest., 2006, 116(5), 1230-1242.
27. Dry, C. Procedures developed for self-repair of polymer matrix composite materials. Compos. Struct., 1996, 35, 263-269.
28. Dry, C. M. and Sottos, N. R. Passive smart self-repair in polymer matrix composite materials. In Smart structures and materials 1995: smart materials, 3rd edition, (Ed. K. Varadian), Proc. SPIE, 1993, 1916, 438-444.
29. Thies, C. Microencapsulation. In Encyclopedia of polymer science and engineering, 1987, vol. 9, pp. 724-745 (John Wiley and Sons, Inc. New York).
30. Jung, D., Hegeman, A., Sottos, N. R., Geubelle, P. H., and White, S. R. Self-healing composites using embedded microspheres. Am. Soc. Mech. Eng. Mater. Div. (Publication), 1997, 80, 265-275.
31. White, S. R., Sottos, N. R., Geubelle, P. H., Moore, J. S., Kessler, M. R., Sriram, S. R., Brown, E. N., and Viswanathan, S. Autonomic healing of polymer composites. Nature, 2001, 409, 794-797.
32. Schwab, P., France, M. B., Ziller, J. W., and Grubbs, R. H. A series of well-defined metathesis catalysts - Synthesis of RuCl2 (=CHR') (PR3)2 and its reactions. Angew. Chem. Int. Ed. Engl. 34, 1995, 2039-2041.
33. Grubbs, R. H. and Chang, S. Recent advances in olefin metathesis and its application in organic synthesis. Tetrahedron, 1998, 54, 4413-4450.
34. Schwab, P., Grubbs, R. H., and Ziller, J. W. Synthesis and applications of RuCl2(=CHR') (PR3)2: the influence of the alkylidene moiety on metathesis activity. J. Am. Chem. Soc., 1996, 118, 100-110.
35. Sanford, M. S., Henling, L. M., and Grubbs, R. H. Synthesis and reactivity of neutral and cationic ruthenium(II) tri(pyrazolyl)borate alkylidenes. Organometallics, 1998, 17, 5384-5389.
36. Stevens, M. P. Polymer chemistry - an introduction, 3rd edition, 1999, pp. 253-255 (Oxford University Press, Oxford).
37. Brown, E. N., Sottos, N. R., and White, S. R. Fracture testing of a self-healing polymer composite. Expl Mech., 2002, 42(4), 372-379.
38. Mostovoy, S., Crosley, P. B., and Ripling, E. J. Use of crack-line-loaded specimens for measuring plane-strain fracture toughness. J. Mater., 1967, 2(3), 661-681.
39. Beres, W., Koul, A. K., and Thamburaj, R. A tapered double-cantilever-beam specimen designed for constant-K testing at elevated temperatures. J. Test. Eval., 1997, 25(6), 536-542.
40. Kessler, M. R. and White, S. R. Cure kinetics of the ring-opening metathesis polymerization of dicyclopentadiene. J. Polym. Sci., Part A, Polym. Chem., 2002, 40, 2373-2383.
41. Kessler, M. R., Larin, G. E., and Bernklau, N. Cure characterization and viscosity development of ring-opening metathesis polymerized resins. J. Therm. Anal. Calorim., 2006, 85(1), 7-12.
42. Rule, J. D. and Moore, J. S. ROMP reactivity of endo-and exo-dicyclopentadiene. Macromolecules, 2002, 35, 7878-7882.
43. Larin, G. E., Kessler, M. R., Bernklau, N., and DiCesare, J. C. Rheokinetics of ring-opening metathesis polymerization of norbornene based monomers intended for self-healing applications. Polym. Eng. Sci., 2006, 46(12), 1804-1811.
44. Nelson, G. L. and Kuo, C.-L. An improved procedure forthe preparation of exo-dicyclopentadiene. Synthesis, 1975, 14, 105-106.
45. Lee, J. K., Hong, S. J., Liu, X., and Yoon, S. H. Characterization of dicyclopentadiene and 5-ethylidene-2-norbornene as self-healing agents for polymer composite and its microcapsules. Macromol. Res., 2004, 12, 478-183.
46. Liu, X., Lee, J. K., Yoon, S. H., and Kessler, M. R. Characterization of diene monomers as healing agents for autonomic damage repair. J. Appl. Polym. Sci., 2006, 101, 1266-1272.
47. Lee, J. K., Liu, X., Yoon, S. H., and Kessler, M. R.Thermal analysis of ring opening metathesis polymerized healing agents. J. Polym. Sci. Part B, Polym. Phys., 2007, 45, 1771-1780.
48. Liu, X., Sheng, X., Kessler, M. R., and Lee, J. K. Isothermal cure characterization of ROMP healing agents for autonomic damage repair: the glass transition temperature and conversion. J. Therm. Anal. Calorim., in press.
49. Mauldin, T. C., Rule, J. D., Sottos, N. R., White, S. R., and Moore, J. S. Self-healing kinetics and the stereoisomers of dicyclopentadiene. J. R. Soc. Interface, 2007, 4(13), 389-393.
50. Jones, A. S., Rule, J. D., Moore, J. S., White, S. R., and Sottos, N. R. Catalyst morphology and dissolution kinetics of self-healing polymers. Chem. Mater., 2006, 18, 1312-1317.
51. Taber, D. F. and Frankowski, K. J. Grubbs' catalyst in paraffin: an air-stable preparation for alkene metathesis. J. Org. Chem., 2003, 68, 6047-6048.
52. Rule, J. D., Brown, E. N., Sottos, N. R., White, S. R., and Moore, J. S. Wax-protected catalyst microspheres for efficient self-healing materials. Ad. Mater., 2005, 17, 205-208.
53. Schwab, P., France, M. B., Ziller, J. W., and Grubbs, R. H. A series of well-defined metathesis catalysts - synthesis of [RuCl2(= CHR') (PR3)2] and its reactions. Angew. Chem., 1995, 107, 2179-2181.
54. Wilhelm, T. E., Belderrain, T. R., Brown, S. N., and Grubbs, R. H. Reactivity of Ru(H)(H2)Cl(PCy3)2 with propargyl and vinyl chlorides: new methodology to give metathesis-active ruthenium carbenes. Organometallics, 1997, 16(18), 3867-3869.
55. Scholl, M., Ding, S., Lee, C. W., and Grubbs, R. H. Synthesis and activity of a new generation of ruthenium-based olefin metathesis catalysts coordinated with 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene ligands. Org. Lett., 1999, 1(6), 953-956.
56. Trnka, T. M., Morgan, J. P., Sanford, M. S., Wilhelm, T. E., Scholl, M., Choi, T.-L., Ding, S., Day, M. W., and Grubbs, R. H. Synthesis and activity of ruthenium alkylidene complexes coordinated with phosphine and N-heterocyclic carbene ligands. J. Am. Chem. Soc., 2003, 125(9), 2546-2558.
57. Love, J. A., Sanford, M. S., Day, M. W., and Grubbs, R. H. Synthesis, structure, and activity of enhanced initiators for olefin metathesis. J. Am. Chem. Soc., 2003, 125(33), 10103-10109.
58. Ritter, T., Day, M. W., and Grubbs, R. H. Rate acceleration in olefin metathesis through a fluorineruthenium interaction. J. Am. Chem. Soc., 2006, 128(36), 11768-11769.
59. Grubbs, R. H. Olefin-metathesis catalysts for the preparation of molecules and materials (Nobel lecture). Angew. Chem., Int. Edn, 2006, 45(23), 3760-3765.
60. Slugovc, C. The ring opening metathesis polymerisation toolbox. Macromol. Rapid Comm., 2004, 25, 1283-1297.
61. Brown, E. N., White, S. R., and Sottos, N. R. Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite - Part I: manual infiltration. Compos. Sci. Technol., 2005, 65, 2466-2473.
62. Brown, E. N., White, S. R., and Sottos, N. R. Retardation and repair of fatigue cracks in a microcapsule toughened epoxy composite - Part II: In situ self-healing. Compos. Sci. Technol., 2005, 65, 2474-2480.
63. Maiti, S. and Geubelle, P. H. Cohesive modeling of fatigue crack retardation in polymers: crack closure effect Eng. Fract. Mech., 2006, 73, 22-41.
64. Maiti, S., Shankar, C., Geubelle, P. H., and Kieffer, J. Continuum and molecular-level modeling of fatigue crack retardation in self-healing polymers. Trans. ASME J. Eng. Mater. Technol., 2006, 128(4), 595-602.
65. Brown, E. N., Kessler, M. R., Sottos, N. R., and White, S. R. In situ poly(urea-formaldehyde) microencapsulation of dicyclopentadiene. J. Microencapsul., 2003, 20, 719-730.
66. Keller, M. W. and Sottos, N. R. Mechanical properties of microcapsules used in a self-healing polymer. Expl Mech., 2006, 46(6), 725-733.
67. Blaiszik, B. J., White, S. R., and Sottos, N. R. Nanocapsules for self-healing composites. In Proceedings of 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2006, vol. 1, pp. 391-396.
68. Kessler, M. R. and White, S. R. Self-activated healing of delamination damage in woven composites. Compos. A, Appl. Sci. Manuf, 2001, 32, 683-699.
69. Kessler, M. R., Sottos, N. R., and White, S. R. Self-healing structural composite materials. Compos. A, Appl. ScL Manuf, 2003, 34, 743-753.
70. Yin, T., Rong, M. Z., Zhang, M. Q., and Yang, G. C. Self-healing epoxy composites - preparation and effect of the healant consisting of microencapsulated epoxy and latent curing agent. Compos. Sci. Technol., 2007, 67(2), 201-212.
71. Cho, S. H., Andersson, H. M., White, S. R., Sottos, N. R., and Braun, P. V. Polydimethylsiloxane-based self-healing materials. Adv. Mater., 2006, 18, 997-1000.
72. Keller, M. W., White, S. R., and Sottos, N. R. An elastomeric self-healing material. In Proceedings of the 2006 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2006, vol. 1, pp. 379-382.
73. Dry, C. M. and McMillan, W. Crack and damage assessment in concrete and polymer matrices using liquids released internally from hollow optical fibers. Proc. SPIE - Int. Soc. Opt. Eng., 1996, 2718, 448-451.
74. Dry, C. M. Adhesive liquid core optical fibers for crack detection and repairs in polymer and concrete matrices. Proc. SPIE - Int. Soc. Opt. Eng., 1995, 2444, 410-413.
75. Motuku, M., Vaidya, U. K., and Janowski, G. M. Polydimethylsiloxane-based self-healing materials. Smart Mater. Struct., 1999, 8, 623-638.
76. Bleay, S. M., Loader, C. B., Hawyes,V. J., Humberstone, L., and Curtis, V. A smart repair system for polymer matrix composites. Compos. A, Appl. Sci. Manuf, 2001, 32, 1767-1776.
77. Hucker, M., Bond, I., Foreman, A., and Hudd, J. Optimisation of hollow glass fibres and their composites. Adv. Compos. Lett., 1999, 8(4), 181-189.
78. Trask, R. S. and Bond, I. P. Biomimetic self-healing of advanced composite structures using hollow glass fibres. Smart Mater. Struct., 2006, 15, 704-710.
79. Pang, J. W. C. and Bond, I. P. 'Bleeding composites' - damage detection and self-repair using a biomimetic approach. Compos. A, Appl. Sci. Manuf, 2005, 36, 183-188.
80. Pang, J. W. C. and Bond, I. P. A hollow fibre reinforced polymer composite encompassing self-healing and enhanced damage visibility. Compos. Sci. Technol., 2005, 65, 1791-1799.
81. Therriault, D., Shepherd, R. F., White, S. R., and Lewis, J. A. Fugitive inks for direct-write assembly of three-dimensional microvascular networks. Adv. Mater., 2005, 17, 395-399.
82. Therriault, D., White, S. R., and Lewis, J. A. Chaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly. Nat. Mater., 2003, 2, 265-271.
83. Lewis, J. A., and Gratson, G. M. Direct writing in three dimensions. Mater. Today, 2004, 7, 32-39.
84. Wang, K.-M., Lorente, S., and Bejan, A. Vascularized networks with two optimized channel sizes. J. Phys. D, Appl. Phys., 2006, 39, 3086-3096.
85. Bejan, A., Lorente, S., and Wang, K.-M. Networks of channels for self-healing composite materials. J. Appl. Phys., 2006, 100, article no. 033528, 6 pp.
86. Kim, S., Lorente, S., and Bejan, A. Vascularized materials: tree-shaped flow architectures matched canopy to canopy. J. Appl. Phys., 2006, 100(6), article no. 063525, 8 pp.
87. Toohey, K. S., White, S. R., and Sottos, N. R. Self-healing polymer coatings. In Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2005, pp. 241-244.
88. Gupta, S., Zhang, Q., Emrick, T., Balazs, A. C., and Russell, T. P. Entropy-driven segregation of nanoparticles to cracks in multilayered composite polymer structures. Nat. Mater., 2006, 5, 229-233.
89. Lee, J. Y., Buxton, G. A., and Balazs, A. C. Using nanoparticles to create self-healing composites. J. Chem. Phys., 2004, 121, 5531-5540.
90. Tyagi, S., Lee, J. Y., Buxton, G. A., and Balazs, A. C. Using nanocomposite coatings to heal surface defects. Macromolecules, 2004, 37, 9160-9168.
91. Smith, K. A., Tyagi, S., and Balazs, A. C. Healing surface defects with nanoparticle-filled polymer coatings: effect of particle geometry. Macromolecules, 2005, 38, 10138-10147.
92. Jeong, W. and Kessler, M. R. Unpublished results, 2006.
93. Weiderhorn, S. M. and Townsend, P. R. Crack healing in glass. J. Am. Ceram. Soc., 1970, 53: 486-489.
94. Stavrinidis, B. and Holloway, D. G. Crack healing in glass. Phys. Chem. Glasses, 1983, 24(1), 19-25.
95. Inagaki, M., Urashima, K., Toyomasu, S., Goto, Y., and Sakai, M. Work of fracture and crack healing in glass. J. Am. Ceram. Soc., 1985, 68, 704-706.
96. Jud, K. and Kausch, H. H. Load transfer through chain molecules after interpenetration at interfaces. Polym. Bull., 1979, 1, 697-707.
97. Jud, K., Kausch, H. H., and Williams, J. G. Fracture mechanics studies of crack healing and welding of polymers. J. Mater. Sci., 1981, 16, 204-210.
98. Kausch, H. H. and Jud, K. Molecular aspects of crack formation and healing in glassy polymers. Plast Rubber Process. Appl., 1982, 2(3), 265.
99. Wool, R. P. and O'Conner, K. M. A theory of crack healing in polymers. J. Appl. Phys. 1981, 52(10), 5953-5963.
100. Chen, X., Dam, M. A., Ono, K., Mal, A., Shen, H., Nutt, S. R., Sheran, K., and Wudl, F. A. Thermally re-mendable cross-linked polymeric material. Science, 2002, 295, 1698-1702.
101. Chen, X., Wudl, F., Mal, A. K., Shen, H., and Nutt, S. R. New thermally remendable highly cross-linked polymeric materials. Macromolecules, 2003, 36, 1802-1807.
102. Liu, Y.-L. and Hsieh, C.-Y. Crosslinked epoxy materials exhibiting thermal remendablility and removability from multifunctional maleimide and furan compounds. J. Polym. Sci. A, Polym. Chem., 2006, 44, 905-913.
103. Hayes, S. A., Jones, F. R., and Marshiya, K. Self-sensing and healing composite materials, In Proceedings of McMat2005: 2005 Joint ASME/ASCE/SES Conference on Mechanics of Materials, Baton Rouge, Louisiana, 1-3 June 2005, p. 414.
104. Hayes, S. A., Jones, F. R., and Zhang, W. Solid state self-healing of fibre-reinforced composite materials. In Proceedings of 15th US National Congress of Theoretical and Applied Mechanics, Boulder, Colorado, USA, 25-30 June 2006.
105. Hayes, S. A., Jones, F. R., Marshiya, K., and Zhang, W. A self-healing thermosetting composite material. Compos. A, Appl. Sci. Manuf, 2007, 38(4), 1116-1120.
106. Jones, F. and Hayes, S. A. Self-healing composite material, World Intellectual Property Organization.
107. Brunelle, D. J., Bradt, J. E., Serth-Guzzo, J., Takekoshi, T., Evans, T. L., Pearce, E. J., and Wilson, P. R. Semicrystalline polymers via ring-opening polymerization: preparation and polymerization of alkylene phthalate cyclic oligomers. Macromolecules, 1998, 31(15), 4782-1790.
108. Lohmiller, J. and Winckler, S. J. Thermoplastic resin transfer molding-based on a cyclic form of polybutylene terephthalate. International SAMPE Technical Conference, 2004, 3417-3425.
109. Fall, R. Puncture reversal of ethylene ionomers - Mechanistic studies. Master's Thesis, Virginia Tech, Blacksburg, VA, 2006.
110. Kalista, S. J. Self-healing of poly(ethylene-co-methacrylic acid) copolymers following projectile puncture. Master's Thesis, Virginia Tech, Blacksburg, VA, 2003.
111. Kalista, S. J. and Ward, T. C. Self-healing of thermoplastic poly(ethylene-co-methacrylic acid) copolymers following projectile puncture, In Proceedings of McMat2005: 2005 Joint ASME/ASCE/SES Conference on Mechanics of Materials, Baton Rouge, Louisiana, 1-3 June 2005, p. 589.
112. Kalista, S. J., Ward, T. C., and Oyetunji, Z. Self-healing of poly(ethylene-co-methacrylic acid) copolymers following projectile puncture. Mech. Adv. Mater. Struct., 2007, in press.
113. Hammick, D. USN researches new self-healing fuel tanks. Jane's Navy International, August 2004.
114. Self-healing fuel tanks under fire. InTech Magazine, October 2004, p. 14.
115. Wang, P.-P., Lee, S., and Harmon, J. P. Ethanol-induced crack healing in poly(methyl methacrylate). J. Polym. Sci., B, Polym. Phys., 1994, 32(7), 1217-1227.
116. Sanada, K., Yasuda, i., and Shindo, Y. Transverse tensile strength of unidirectional fibre-reinforced polymers and self-healing of interfacial debonding. Plast., Rubber Compos., 2006, 35, 67-72.
117. Zako, M. and Takano, N. Intelligent material systems using epoxy particles to repair microcracks and delamination damage in GFRE. J. Intel. Mater. Syst. Struct., 1999, 10, 836-841.
118. Ford, K. J. and Barbero, E. J. Identification of continuum healing mechanics for polymer matrix composites. International SAMPE Symposium and Exhibition (Proceedings), 2005, vol. 50, 1739-1752.
119. Barbero, E. J., Greco, F., and Lonetti, P. Continuum damage-healing mechanics with application to self-healing composites. Int. J. Damage Mech., 2005, 14, 51-81.
120. Barbero, E. J., Ford, K. J., and Stiller, A. Continuum damage healing mechanics for modeling of self-healing composites. International SAMPE Technical Conference, 2004, pp. 2681-2689.
121. Barbero, E. J. and Lonetti, P. Application of continuum damage healing mechanics to self-healing composites. Am. Soc. Mech. Eng.,Aerosp. Div. (Publication) AD, 2003, 68, 515-519.
122. Barbero, E. J. and Ford, K. J. Identification of continuum healing mechanics for polymer matrix composites. In Proceedings of McMat2005: 2005 Joint ASME/ASCE/SES Conference on Mechanics of Materials, Baton Rouge, Louisiana, 1-3 June 2005, p. 367.
123. Lee, Y. S., Yoon, Y. K., Jeong, B. Y., and Yoon, H. S. In-situ crack propagation observation of a particle reinforced polymer composite using the double cleavage drilled compression specimens. J. Mech. Sci. Tech., 2006, 20, 310-318.
124. Brown, E. N., White, S. R., and Sottos, N. R. Microcapsule induced toughening in a self-healing polymer composite. J. Mater. Sci., 2004, 39, 1703-1710.
125. Tian, W., Wang, X., Pan, Q., and Mao, Z. Microcapsule used for self-healing polymer material. Huagong Xuebao/J. Chem. Ind. Eng. (China), 2005, 56, 1138-1140.
126. Nairn, J. A. Matrix microcracking in composites. In Polymer matrix composites (Eds R. Talreja and J.-A. E. Manson), in Comprehensive composite materials 2000, vol. 2, pp. 403-432 (Elsevier Science, New York).
127. Bernstein, B. S. Assessment of self-healing polymer technology for utility overhead applications. IEEE Electr. Insul. Mag., 2006, 22, 15-20.
128. Gould, P. Self-help for ailing structures. Mater. Today, 2003, 6, 44-49.
129. Carlson, H. C. and Goretta, K. C. Basic materials research programs at the U.S. air force office of scientific research. Mater. Sci. Eng. B, Solid-State Mater. Adv. Technol., 2006, 132(1-2), 2-7.
130. Thostenson, E. T. and Chou, T.-W. Carbon nanotube networks: sensing of distributed strain and damage for life prediction and self healing. Adv. Mater., 2006, 18(21), 2837-2841.
131. Yamaguchi, M., Ono, S., and Terano, M. Self-repairing property of polymer network with dangling chains. Mater. Lett., 2007, 61(6), 1396-1399.
132. Takeda, K., Tanahashi, M., and Unno, H. Self-repairing mechanism of plastics. Sci. Technol. Adv. Mater., 2003, 4, 435-444.
133. Plaisted, T. A., Amirkhizi, A. V., Arbelaez, D., Nemat-Nasser, S. C., and Nemat-Nasser, S. Self-healing structural composites with electromagnetic functionality. Proc. SPIE - Int. Soc. Opt. Eng., 2003, 5054, 372-381.
134. Chung, C.-M., Roh, Y.-S., Cho, S.-Y., and Kim, J.-G. Crack healing in polymeric materials via photo-chemical [2+2] cycloaddition. Chem. Mater., 2004, 16, 3982-3984.
135. Burton, D. S., Gao, X., and Brinson, L. C. Finite element simulation of a self-healing shape memory alloy composite. Mech. Mater., 2006, 38, 525-537.
136. Araki, S., Ono, H., and Saito, K. Micromechanical analysis of crack closure mechanism for intelligent material containing TiNi fibers. JSME Int. J. A, Solid Mech. Mater. Eng., 2002, 45, 208-216.
137. Hamada, K., Kawano, F., and Asaoka, K. Shape recovery of shape memory alloy fiber embedded resin matrix smart composite after crack repair. Dent. Mater. J., 2003, 22, 160-167.
138. Wang, X. Shape memory alloy volume fraction of prestretched shape memory alloy wire-reinforced composites for structural damage repair. Smart Mater. Struct., 2002, 11, 590-595.
139. Carlson, J. A., English, J. M., and Coe, D. J. A flexible, self-healing sensor skin. Smart Mater. Struct., 2006, 15(5), N129-N135.
140. Rule, J. D., Wilson, S. R., and Moore, J. S. Radical polymerization initiated by bergman cyclization. J. Am. Chem. Soc., 2003, 125(43), 12992-12993.
141. Rule, J. D. and Moore, J. S. Polymerizations initiated by diradicals from cycloaromatization reactions. Macromolecules, 2005, 38(17), 7266-7273.