Parametric studies on self-repairing approaches for resin infused composites subjected to low velocity impact

Smart Materials and Structures

Volumn 8, Issue 5, 1999, Pages 623-638

  Motuku, M ^a   Vaidya, U K ^b,c   Janowski, G M ^a  

^a University of Alabama at Birmingham   (United States)

^b NORTH DAKOTA STATE UNIVERSITY   (United States)

^c TUSKEGEE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM; BOROSILICATE GLASS; COMPOSITE MATERIALS; COPPER; EPOXY RESINS; FRACTOGRAPHY; GLASS FIBER REINFORCED PLASTICS; IMPACT TESTING; SOLUTIONS; SPATIAL VARIABLES CONTROL; STORAGE (MATERIALS); TUBING;

DAMAGE REPAIRING SOLUTION; FIBER FAILURE; FLINT GLASS PASTEUR PIPETS; MICROCAPILLARY PIPETS; PASSIVE SMART POLYMER COMPOSITES; SELF REPAIRING MECHANISM; VINYL ESTER;

INTELLIGENT MATERIALS;

EID: 0033321593     PISSN: 09641726     EISSN: None     Source Type: Journal    
DOI: 10.1088/0964-1726/8/5/313     Document Type: Article

References (49)

1. Horton R E and McCarty J E 1987 Engineered Materials Handbook: Composites (Metals Park, OH: ASM International) 1 259-67
2. Horton R E 1989 International Encyclopedia of Composites ed S M Lee (New York: VCH Publishers) 2 343-50
3. Schoeppner G A 1994 Proc. 10th DoD/NASA/FAA Conf. on Fibrous Composites in Structural Design (Atlantic City, NJ: FAA Technical Center) pp VIII-47-VIII-61
4. Rhodes M D 1975 16th AIAA/ASME/SAE Structure, Structural Dynamics and Materials Conf. (Denver, CO: AIAA) Paper No 75-748, pp 1-9
5. Rhodes M D 1978 NASA Scientific and Technical Information Office SERIES: NASA Technical Memorandium 78719 (Hampton, VA: NASA) pp 1-40
6. ASTM STP 568 1975 Foreign Object Impact Damage to Composites (Philadelphia, PA: American Society for Testing and Materials)
7. ASTM STP 936 1987 Instrumented Impact Testing of Plastics and Composite Materials eds S L Kessler et al (Philadelphia, PA: American Society for Testing and Materials)
8. ASTM STP 563 1974 Instrumented Impact Testing (Philadelphia, PA: American Society for Testing and Materials)
9. Strong A B 1989 International Encyclopedia of Composites ed S M Lee (New York: VCH Publishers) 2 1-6
10. Gause L W and Buckley L J 1987 ASTM 936: Instrumented Impact Testing of Plastics and Composite Materials ed S L Kessler et al (Philadelphia, PA: American Society for Testing and Materials) pp 248-61
11. Herup E J and Palazotto A N 1997 Composites Sci. Technol. 57 1581-98
12. Aggag G and Takahashi K 1997 Polymer Eng. Sci. 36 2260-6
13. Ireland D R 1974 ASTM STP 563: Instrumented Impact Testing (Philadelphia, PA: American Society for Testing and Materials) pp 3-29
14. Saxton H J, Ireland D R and Server W L 1974 ASTM STP 563: Instrumented Impact Testing (Philadelphia, PA: American Society for Testing and Materials) pp 50-73
15. Cheresh M C and McMichael S 1987 ASTM STP 936: Instrumented Impact Testing of Plastics and Composite Materials ed S L Kessler et al (Philadelphia, PA: American Society for Testing and Materials) pp 9-23
16. Knakal C W and Ireland D R 1987 ASTM STP 936: Instrumented Impact Testing of Plastics and Composite Materials ed S L Kessler et al (Philadelphia, PA: American Society for Testing and Materials) pp 44-57
17. Wardle M W and Zahr G 1987 ASTM STP 936: Instrumented Impact Testing of Plastics and Composite Materials (Philadelphia, PA: American Society for Testing and Materials pp 219-35
18. Bormier E J, Yarmoska B S and Dan E 1984 Proc. ANTAC 84: Plastics in a World Economy Conf. Proc. (New Orleans, LA: The Society of Plastics Engineers) pp 294-6
19. Marur P R and Tippur H V 1997 Proc. ASME Noise Control and Acoustic Division (Dallas, TX: ASME) NCA-Vol. 24, pp 227-34
20. Zanichelli C, Rink M, Pavan A and Ricco T 1990 Polymer Eng. Sci. 30 1117-24
21. Delfosse D, Pageau G, Bennett R and Poursartip A 1993 J. Composites Technol. Res. 15 38-45
22. Sreenivasan P R 1996 TRANS. Indian Inst. Met. 49 677-96
23. Bezeredi A, Voros G and Pukanszky B 1997 J. Mater. Sci. 32 6601-8
24. Sahraoui S 1990 Eng. Fracture Mech. 36 1013-19
25. Deaton J W 1987 Engineered Materials Handbook: Adhesives and Sealants (Metals Park, OH: ASM International) 3 829-39
26. Myhre S H and Beck C E 1987 Engineered Materials Handbook: Adhesives and Sealants (Metals Park, OH: ASM International) 3 823-8
27. Engineered Materials Handbook-Desk Edition: Repair 1995 (Materials Park, OH: ASM International) pp 625-30
28. Maguire D M 1989 J. Society for the Advancement of Materials and Process Engineering 25 11-14
29. Xiao X R, Hoa S V and Street K N 1990 35th Int. SAMPE Symp. and Exhibition vol 34 (Anaheim, CA: Society for the Advancement of Materials and Process Engineering) pp 37-45
30. Border J and Salas R 1989 34th Int. SAMPE Symp. and Exhibition vol 34 (Reno, NV: Society for the Advancement of Materials and Process Engineering) pp 2569-78
31. Chabot K A and Brescia J A 1993 25th Int. SAMPE Tech. Conf. vol 25, eds R Trabocco and T Lynch (Philadelphia, PA: Society for the Advancement of Materials and Process Engineering) pp 200-11
32. Benatar A and Gutowski T G 1986 SAMPE Quarterly vol 8 (Azusa, CA: Society of Aerospace Material and Process Engineers) pp 34-41
33. Miller A K et al 1990 J. Society for the Advancement of Materials and Process Engineering 26 37-54
34. Davies P et al 1991 Composites 22 425-31
35. Xiao X R and Hoa S V 1991 Proc 8th Int. SAMPE Conf. on Composites Materials: Composites vol 1, eds S W Tsai and G S Springer (Honolulu, HI: Society for the Advancement of Materials and Process Engineering) pp 8A1-10
36. Mehrkam P, Cochran R and Trabocco R 1993 25th Int. SAMPE Tech. Conf. vol 25, eds R Trabocco and T Lynch (Philadelphia, PA: Society for the Advancement of Materials and Process Engineering) pp 212-21
37. Silverman E M and Griese R A 1989 J. Society for the Advancement of Materials Process Engineering 25 34-8
38. Lui D, Lee C Y and Lu X 1993 J. Comp. Mat. 27 1257-127
39. Dry C M 1990 Proc. Advances in Cementitious Materials Conf. (Gaithersburg, MD: American Ceramic Society) pp 729-67
40. Dry C M 1992 Proc. Mat. Res. Society Symp. 276 311-14
41. Dry C M 1992 Proc. Recent Advances in Adaptive and Sensory Materials and their Applications Conf. (Blacksburg, VA: Technomic Publishing Co.) pp 207-23
42. Dry C M 1992 ADPA/AIAA/ASME/SPIE Conf. on Active Materials and Adaptive Structures ed G J Knowles (Alexandria, VA: IOP Publishing) pp 191-3
43. Dry C M 1994 Fracture Mechanics: 25th Volume ASTM STP 1220 eds F Erdogan and R J Hartranft (Philadelphia, PA: Society for the Advancement of Materials and Process Engineering) pp 268-81
44. Dry C M 1994 Smart Mater. Struct. 3 118-23
45. Dry C M and Sottos N R 1993 Proc. SPIE Int. Society Opt. vol 1916 (Albuquerque, NM: SPIE) pp 438-44
46. Dry C M 1996 Composite Structures 35 263-9
47. Motuku M, Janowski G M, Vaidya U K, Mahfuz H and Jeelani S 1998 Proc. ASME Noise Control and Acoustics Division NCA-Vol. 25 (Anaheim, CA: ASME) pp 283-95
48. Motuku M, Janowski G M, Vaidya U K, Mahfuz H and Jeelani S 1999 J. Polymer Polymer Composites 7 at press
49. Motuku M, Janowski G M, Vaidya U K, Hosur M V, Mahfuz H and Jeelani S 1999 J. Polymer Composites Ref. #99006, at press