Failure mode of dental restorative materials under Hertzian indentation

Dental Materials

Volumn 23, Issue 10, 2007, Pages 1236-1244

  Wang, Yan ^a,b   Darvell, B W ^b  

^a SUN YAT SEN UNIVERSITY   (China)

^b UNIVERSITY OF HONG KONG   (Hong Kong)

Author keywords

Amalgam; Dental restorative material; Failure mode; Glass ionomer cement (GIC); Hertzian indentation

Indexed keywords

CERAMIC MATERIALS; CRACKS; FAILURE MODES; HEALTH CARE; MULTILAYERS; SCANNING ELECTRON MICROSCOPY;

DENTAL RESTORATIVE MATERIALS; GLASS IONOMER CEMENT (GIC); HERTZIAN INDENTATION;

DENTAL AMALGAMS;

DENTAL ALLOY; GLASS IONOMER;

ARTICLE; CHEMISTRY; DENTAL SURGERY; EVALUATION; HARDNESS; INSTRUMENTATION; MATERIALS TESTING; METHODOLOGY;

DENTAL AMALGAM; DENTAL RESTORATION FAILURE; GLASS IONOMER CEMENTS; HARDNESS; MATERIALS TESTING;

EID: 34547668849     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2006.11.016     Document Type: Article

References (40)

1. Hickel R., Manhart J., and García-Godoy F. Clinical results and new developments of direct posterior restorations. Am J Dent 13 Special Issue (2000) 41DL 54D
2. Mauro F., Augusto A., and Leona B. Longitudinal study of pressed glass-ceramic inlays for four and a half years. J Prosthet Dent 78 (1997) 346-353
3. Jokstad A., and Mjör I.A. Replacement reasons and service time of class-II amalgam restorations in relation to cavity design. Acta Odontol Scand 49 2 (1991) 109-126
4. Smales R.J., Gerke D.C., and White I.L. Clinical evaluation of occlusal glass ionomer, resin, and amalgam restorations. J Dent 18 5 (1990) 243-249
5. Strand G.V., Nordbo H., and Tveit AB. A 3-year clinical study of tunnel restorations. Eur J Oral Sci 104 (1996) 384-389
6. Mjör I.A. The reasons for replacement and the age of failed restorations in general dental practice. Acta Odontol Scand 55 (1997) 58-63
7. Lawn B.R., Deng Y., and Thompson V.P. Use of contact testing in the characterization and design of all-ceramic crownlike layer structures: a review. J Prosthet Dent 86 5 (2001) 495-510
8. Lawn B.R., Deng Y., Miranda P., Pajares A., Chai H., and Kim D.K. Overview: damage in brittle layer structures from concentrated loads. J Mater Res 17 12 (2002) 3019-3036
9. Peterson I.M., Wuttiphan S., Lawn B.R., and Chyung K. Role of microstructure on contact damage and strength degradation of micaceous glass-ceramics. Dent Mater 14 1 (1998) 80-89
10. Rhee Y.W., Kim H.W., Deng Y., and Lawn B.R. Brittle fracture versus quasi-plasticity in ceramics: a simple predictive index. J Am Ceram Soc 84 3 (2001) 561-565
11. Rhee Y.W., Kim H.W., Deng Y., and Lawn B.R. Contact-induced damage in ceramic coatings on compliant substrates: fracture mechanics and design. J Am Ceram Soc 84 5 (2001) 1066-1072
12. Miranda P., Pajares A., Guiberteau F., Cumbrera F.L., and Lawn B.R. Contact fracture of brittle bilayer coatings on soft substrates. J Mater Res 16 1 (2001) 115-126
13. Chai H., and Lawn B.R. Cracking in brittle laminates from concentrated loads. Acta Mater 50 10 (2002) 2613-2625
14. Tsai Y.L., Petsche P.E., Anusavice K.J., and Yang M.C. Influence of glass-ceramic thickness on Hertzian and bulk fracture mechanisms. Int J Prosthodont 11 1 (1998) 27-32
15. Chai H., and Lawn B. Fracture modes in brittle coatings with large interlayer modulus mismatch. J Mater Res 14 9 (1999) 3805-3817
16. Shrotriya P., Wang R., Katsube N., Seghi R., and Soboyejo W.O. Contact damage in model dental multilayers: an investigation of the influence of indenter size. J Mater Sci-Mater Med 14 1 (2003) 17-26
17. Jung Y.G., Wuttiphan S., Peterson I.M., and Lawn B.R. Damage modes in dental layer structures. J Dent Res 78 4 (1999) 887-897
18. Zhao H., Hu X.Z., Bush M.B., and Lawn B.R. Cracking of porcelain coatings bonded to metal substrates of different modulus and hardness. J Mater Res 16 5 (2001) 1471-1478
19. Dong X.D., and Darvell B.W. Stress distribution and failure mode of dental ceramic structures under Hertzian indentation. Dent Mater 19 6 (2003) 542-551
20. Kim J.H., Miranda P., Kim D.K., and Lawn B.R. Effect of an adhesive interlayer on the fracture of a brittle coating on a supporting substrate. J Mater Res 18 1 (2003) 222-227
21. Chai H., and Lawn B. Role of adhesive interlayer in transverse fracture of brittle layer structures. J Mater Res 15 4 (2000) 1017-1024
22. Lee C.S., Kim D.K., Sanchez J., Miranda P., Pajares A., and Lawn B.R. Rate effects in critical loads for radial cracking in ceramic coatings. J Am Ceram Soc 85 8 (2002) 2019-2024
23. Lee C.S., Lawn B.R., and Kim D.K. Effect of tangential loading on critical conditions for radial cracking in brittle coatings. J Am Ceram Soc 84 11 (2001) 2719-2721
24. Kim H.W., Deng Y., Miranda P., Pajares A., Kim D.K., Kim H.E., and Lawn B.R. Effect of flaw state on the strength of brittle coatings on soft substrates. J Am Ceram Soc 84 10 (2001) 2377-2384
25. Lawn B.R., Deng Y., Lloyd I.K., Janal M.N., Rekow E.D., and Thompson V.P. Materials design of ceramic-based layer structures for crowns. J Dent Res 81 6 (2002) 433-438
26. Kelly J.R. Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent 81 6 (1999) 652-661
27. Kelly J.R., Giordano R., Pober R., and Cima M.J. Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont 3 5 (1990) 430-440
28. Deng Y., Miranda P., Pajares A., Guiberteau F., and Lawn B.R. Fracture of ceramic/ceramic/polymer trilayers for biomechanical applications. J Biomed Mater Res Part A 67A 3 (2003) 828-833
29. ISO 1559. Dental amalgam (2001), International Organization for Standardization, Geneva
30. ISO 9917-1. Dental water-based cements: powder/liquid acid-base cements. (2003), International Organization for Standardization, Geneva
31. Leung V., and Darvell B.W. Calcium phosphate system in saliva-like media. J Chem Soc Faraday Trans 87 11 (1991) 1759-1764
32. Craig R.G. Restorative dental materials. 10th ed. (1997), Mosby, St. Louis
33. Wang Y. Hertzian indentation failure of dental restorative materials. Ph.D. thesis. The University of Hong Kong. 2006.
34. Fischer-Cripps A. Introduction to contact mechanics (2000), Springer, New York
35. Deng Y., Lawn B.R., and Lloyd I.K. Characterization of damage modes in dental ceramic bilayer structures. J Biomed Mate Res (Appl Mater) 63 2 (2002) 137-145
36. Miranda P., Pajares A., Guiberteau F., Deng Y., and Lawn B.R. Designing damage-resistant brittle-coating structures. I. Bilayers. Acta Mater 51 14 (2003) 4347-4356
37. Warren P.D., Hills D.A., and Dai D.N. Mechanics of Hertzian cracking. Tribol Int 28 6 (1995) 357-362
38. 4. Acta Mater 44 8 (1996) 3025-3034
39. Bryant R.W., and Mahler D.B. Modulus of elasticity in bending of composites and amalgams. J Prosthet Dent 56 2 (1986) 243-248
40. Cardarelli F. Materials handbook: a concise desktop reference (2000), Springer, London