Three-dimensional laser micrometry characterization of surface wear in total hip arthroplasty

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 82, Issue 2, 2007, Pages 428-439

  Kohm, Andrew ^a   Gaumer, Jeremy ^a   Ravula, Vishnu ^a   Urban, Robert ^b   Gilbertson, Les ^c   Bos, Gary ^d   Dey, Tamal ^d   Nelson, Laura ^d   Dyce, Jonathan ^d   Lannutti, John ^a  

^a Ohio State University   (United States)

^b RUSH UNIVERSITY MEDICAL CENTER   (United States)

^c ZIMMER INC   (United States)

^d OHIO STATE UNIVERSITY   (United States)

Author keywords

Arthroplasty; Surface characterization; Total joint replacement; Wear

Indexed keywords

MICROMETERS; MOLECULAR WEIGHT; POLYETHYLENES; WEAR OF MATERIALS; ZIRCONIA;

ARTHROPLASTY; LASER MICROMETERS; SURFACE CHARACTERIZATION; SURFACE WEAR; TOTAL JOINT REPLACEMENT;

HIP PROSTHESES;

POLYETHYLENE; ZIRCONIUM;

ACCURACY; ARTICLE; DIAGNOSTIC VALUE; IMAGE QUALITY; LASER; LASER MICROMETRY; MOLECULAR WEIGHT; NONHUMAN; PILOT STUDY; QUANTITATIVE ANALYSIS; SURFACE PROPERTY; THREE DIMENSIONAL IMAGING; TOTAL HIP PROSTHESIS;

ARTHROPLASTY, REPLACEMENT, HIP; CHROMIUM ALLOYS; EQUIPMENT FAILURE ANALYSIS; HIP PROSTHESIS; HUMANS; LASERS; SURFACE PROPERTIES; ZIRCONIUM;

EID: 34547113991     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.30748     Document Type: Article

References (49)

1. USFDA. Medical device recalls: Recall of zirconia ceramic femoral heads for hip implants. Available at www.fda.gov/cdrh/recalls/zirconiahip.html; 2001.
2. Haraguchi K, Sugano N, Nishii T, Miki H, Oka K, Yoshikawa H. Phase transformation of a zirconia ceramic head after total hip arthroplasty. J Bone Joint Surg Br 2001;83:996-1000.
3. Murakami T, Ohtsuki N. Friction and wear characteristics of sliding pairs of bioceramics and polyethylene: Influence of aging on tribological behaviour of tetragonal zirconia polycrystals. Bioceramics 1992;5:365-372.
4. Oonishi H, Ueno M, Okimatsu H, Amino H. Investigation of the wear behaviour of ceramic on ceramic combinations in total hip prosthesis. In Bioceramics: Proceedings of Ninth International Symposium; 1996. pp 503-506.
5. Sudanese A, Toni A, Cattaneo GL, Ciaroni D, Greggi T, Dallari D, Galli G, Giunti A. Alumina vs. zirconium oxide: A comparative wear test. In Bioceramics: Proceedings of First International Bioceramic Symposium; 1988. pp 237-240.
6. Willmann G, Fruh HJ, Pfaff HG. Wear characteristics of sliding pairs of zirconia (Y-TZP) for endoprostheses. Biomaterials 1996;17:2157-2162.
7. Hasegawa M, Sudo A, Hirata H, Uchida A. Ceramic acetabular liner fracture in total hip arthroplasty with a ceramic sandwich cup. J Arthroplasty 2003;18:658-661.
8. Willmann G, Schikora N, Pitto RP. Retrieval of ceramic wear couples in total hip arthroplasty. Bioceramics 15 2003;240: 813-815.
9. Smith RL, Unsworth A. An in vitro wear study of alumina-alumina total hip prostheses. Proc Inst Mech Eng 2001;215: 443-446.
10. Smith SL, Unsworth A. A comparison between gravimetric and volumetric techniques of wear measurement of UHMWPE acetabular cups against zirconia and cobalt-chromium-molybdenum femoral heads in a hip simulator. Proc Inst Mech Eng [H] 1999;213:475-483.
11. Stewart TD, Tipper JL, Insley G, Streicher RM, Ingham E, Fisher J. Severe wear and fracture of zirconia heads against alumina inserts in hip simulator studies with microseparation. J Arthroplasty 2003;18:726-734.
12. Stewart T, Tipper J, Streicher R, Ingham E, Fisher J. Long-term wear of HIPed alumina on alumina bearings for THR under microseparation conditions. J Mater Sci Mater Med 2001;12:1053-1056.
13. Nevelos J, Ingham E, Doyle C, Streicher R, Nevelos A, Walter W, Fisher J. Microseparation of the centers of alumina-alumina artificial hip joints during simulator testing produces clinically relevant wear rates and patterns. J Arthroplasty 2000;15: 793-795.
14. Manaka M, Clarke IC, Yamamoto K, Shishido T, Gustafson A, Imakiire A. Stripe wear rates in alumina THR - Comparison of microseparation simulator study with retrieved implants. J Biomed Mater Res B Appl Biomater 2004;69:149-157.
15. Fardin N, Feng Q, Stephansson O. Application of a new in situ 3D laser scanner to study the scale effect on the rock joint surface roughness. Int J Rock Mech Min Sci 2004;41: 329-335.
16. Tognola G, Parazzini M, Ravazzani P, Grandori F, Svelto C. 3D acquisition and quantitative measurements of anatomical parts by optical scanning and image reconstruction from unorganized range data. IEEE Trans Instrum Meas 2003;52:1665-1673.
17. Fontana R, Greco M, Materazzi M, Pampaloni E, Pezzati L, Rocchini C, Scopigno R. Three-dimensional modelling of statues: The Minerva of Arezzo. J Cult Heritage 2002;3:325-331.
18. Dey TK, Goswami S. Tight cocone: A water-tight surface reconstructor. J Comput Inf Sci Eng 2003;4:302-307.
19. Dey TK, Giesen J. Detecting undersampling in surface reconstruction. In Proceedings of the 17th Annual Symposium on Computational Geometry; 2001. pp 257-263.
20. Mizoue T, Yamamoto K, Masaoka T, Imakiire A, Akagi M, Clarke I. Validation of acetabular cup wear volume based on direct and two-dimensional measurements: Hip simulator analysis. J Orthop Sci 2003;8:491-499.
21. Bragdon CR, Malchau H, Yuan X, Perinchief R, Karrholm J, Borlin N, Estok D, Harris WH. Experimental assessment of precision and accuracy of radiostereometric analysis for the determination of polyethylene wear in a total hip replacement model. J Orthop Res 2002;20:688-695.
22. Williams S, Butterfield M, Stewart T, Ingham E, Stone M, Fisher J. Wear and deformation of ceramic-on-polyethylene total hip replacements with joint laxity and swing phase microseparation. Proc Inst Mech Eng [H] 2003;217:147-153.
23. Reinisch G, Judmann KP, Lhotka C, Lintner F, Zweymuller KA. Retrieval study of uncemented metal-metal hip prosthesis revised for early loosening. Biomaterials 2003;24:1081-1091.
24. Raimondi MT, Vena P, Pietrabissa R. Quantitative evaluation of the prosthetic head damage induced by microscopic third-body particles in total hip replacement. J Biomed Mater Res 2001;58:436-448.
25. Elfick APD, Hall RM, Pinder IM, Unsworth A. The influence of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene sockets in cementless total hip replacements. Appl Biomater 1999;48:712-718.
26. Jiang XQ, Blunt L. Morphological assessment of in vivo wear of orthopaedic implants using multiscalar wavelets. Wear 2001;250: 217-221.
27. Bloebaum RD, Zou L, Bachus KN, Shea KG, Hofmann AA, Dunn HK. Analysis of particles in acetabular components from patients with osteolysis. Clin Orthop Relat Res 1997;338: 109-118.
28. Willie BM, Shea JE, Bloebaum RD, Hofmann AA. Elemental and morphological identification of third-body particulate and calcium stearate inclusions in polyethylene components. J Biomed Mater Res 2000;53:137-142.
29. Goodman SB, Lind M, Song Y, Smith RL. In vitro, in vivo, and tissue retrieval studies on particulate debris. Clin Orthop 1998;352:25-34.
30. Maloney WJ, Smith RL. Periprosthetic osteolysis in total hip arthroplasty: The role of particulate wear debris. J Bone Joint Surg Am 1995;77:1448-1461.
31. Sumner DR, Jasty M, Jacobs JJ, Urban RM, Bragdon CR, Harris WH, Galante JO. Histology of porous-coated acetabular components - 25 Cementless cups retrieved after arthroplasty. Acta Orthop Scand 1993;64:619-626.
32. Jasty M, Bragdon C, Jiranek W, Chandler H, Maloney W, Harris WH. Etiology of osteolysis around porous-coated cementless total hip arthoplasties. Clin Orthop 1994;308:111-126.
33. Salvati EA, Betts F, Doty SB. Particulate metallic debris in cemented total hip arthroplasty. Clin Orthop 1993;293:160-173.
34. Howie AW, Haynes DR, Rogers SD, McGee MA, Pearcey MJ. The response to particulate debris. Orthop Clin North Am 1993; 24:571-581.
35. Lewis G. Polyethylene wear in total hip and knee arthoplasties. J Biomed Mater Res 1997;38:55-75.
36. McKellop HA, Campbell P, Park SH, Schmalzried TP, Grigoris P, Amstutz HC, Sarmiento A. The origin of submicron polyethylene wear debris in total hip arthroplasty. Clin Orthop 1995;311:3-20.
37. Schmalzried TP, Dorey FJ, McKellop H. Commentary: The multifactorial nature of polyethylene wear in vivo. J Bone Joint Surg Am 1998;80:1234-1243
38. Kohm A. New Techniques for Characterization of Surface and Volumetric Wear in Total Hip Arthroplasty Biomedical Engineering. PhD Thesis, The Ohio State University; 2003.
39. Turell ME, Friedlaender GE, Wang A, Thornhill TS, Bellare A. The effect of counterface roughness on the wear of UHMWPE for rectangular wear paths. Wear 2005;259:984-991.
40. Wang A, Polineni VK, Stark C, Dumbleton JH. Effect of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene acetabular cups. J Arthroplasty 1998;13: 615-620.
41. Sychterz CJ, Engh CA, Swope SW, McNulty DE, Engh CA. Analysis of prosthetic femoral heads retrieved at autopsy. Clin Orthop 1999;358:223-234.
42. Fisher J, Firkins P, Reeves E, Hailey J, Isaac G. The influence of scratches to metallic counterfaces on the wear of ultra-high molecular weight polyethylene. Proc Inst Mech Eng [H] 1995;209: 263-264.
43. Shishido T, Clarke IC, Williams P, Boehler M, Asano T, Shoji H, Masaoka T, Yamamotto K, Imakiire A. Clinical and simulator wear study of alumina ceramic THR to 17 years and beyond. J Biomed Mater Res B Appl Biomater 2003;67: 638-647.
44. Skurla CP, James SP. Assessing the dog as a model for human total hip replacement: Analysis of 38 postmortem-retrieved canine cemented acetabular components. J Biomed Mater Res B Appl Biomater 2005;73:260-270.
45. Masaoka T, Clarke IC, Yamamoto K, Tamura J, Williams PA, Good VD, Shoji H, Atsuhiro I. Validation of volumetric and linear wear-measurement in UHMWPE cups - A hip simulator analysis. Wear 2003;254:391-398.
46. Katayama K, Maezawa H, Uesato N, Sasada T. Physicochemical and biomechanical examination of surfaces of retrieved polyethylene heads from total hip prostheses with rotating polyethylene head system. J Orthop Sci 2001;6:503-509.
47. Haraguchi K, Sugano N, Nishii T, Sakai T, Yoshikawa H, Ohzono K. Influence of polyethylene and femoral head surface quality on wear: A retrieval study. Int Orthop 2001;25: 29-34.
48. Wang A. A unified theory of wear for ultra-high molecular weight polyethylene in multi-directional sliding. Wear 2001;248: 38-47.
49. Tipper JL, Firkins PJ, Besong AA, Barbour PSM, Nevelos J, Stone MH, Ingham E, Fisher J. Characterisation of wear debris from UHMWPE on zirconia ceramic, metal-on-metal and alumina ceramic-on-ceramic hip prostheses generated in a physiological anatomical hip joint simulator. Wear 2001;250: 120-128.