On the sensitivity characteristics in the determination of the elastic and plastic properties of materials through multiple indentation

Journal of Materials Research

Volumn 22, Issue 4, 2007, Pages 1043-1063

  Lan, Hongzhi ^a   Venkatesh, T A ^a  

^a Tulane University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ELASTICITY; ELASTOPLASTICITY; INDENTATION; PLASTICITY; STRESSES;

INDENTER COMBINATION; MULTIPLE INDENTATION; REPRESENTATIVE STRESSES; SPHERICAL INDENTATION;

MATERIALS PROPERTIES;

EID: 34247346857     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2007.0123     Document Type: Article

References (51)

1. M.F. Doerner and W.D. Nix: A method for interpreting the data from depth-sensing indentation instruments. J. Mater. Res. 1, 601 (1986).
2. W.C. Oliver and G.M. Pharr: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).
3. Y.T. Cheng and C.M. Cheng: Relationships between hardness, elastic modulus, and the work of indentation. Appl. Phys. Lett. 73, 614 (1998).
4. A.E. Giannakopoulos and S. Suresh: Determination of elastoplastic properties by instrumented sharp indentation. Scripta Mater. 40, 1191 (1999).
5. T.A. Venkatesh, K.J. Van Vliet, A.E. Giannakopoulos, and S. Suresh: Determination of elasto-plastic properties by instrumented sharp indentation: Guidelines for property extraction. Scripta Mater. 42, 833 (2000).
6. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh, and S. Suresh: Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater. 49, 3899 (2001).
7. Z.H. Xu and D. Rowcliffe: Method to determine the plastic properties of bulk materials by nanoindentation. Philos. Mag. A 82, 1893 (2002).
8. N. Huber, W.D. Nix, and H. Gao: Identification of elastic-plastic material parameters from pyramidal indentation of thin films. Proc. R. Soc. Lond. A 458, 1593 (2002).
9. B. Bhushan and X.D. Li: Nanomechanical characterization of solid surfaces and thin films. Int. Mater. Rev. 48, 125 (2003).
10. Y.T. Cheng and C.M. Cheng: Scaling, dimensional analysis, and indentation measurements. Mater. Sci. Eng., R 44, 91 (2004).
11. M. Nilsson, R. Warren, and M.V. Swain: A critical appraisal of the interfacial toughness of ceramic-matrix composites using indentation techniques. Sci. Eng. Ceramics II Key Eng. Mater. 2, 675 (1999).
12. A.A. Volinsky and W.W. Gerberich: Nanoindentation techniques for assessing mechanical reliability at the nanoscale. Microelectronic Eng. 69, 519 (2003).
13. J. Lou, P. Shrotriya, T. Buchheit, D. Yang, and W.O. Soboyejo: A nano-indentation study on the plasticity length scale effects in LIGA Ni MEMS structures. J. Mater. Sci. 38, 4137 (2003).
14. Y.G. Wei and J.W. Hutchinson: Hardness trends in micron scale. J. Mech. Phy. Solids 51, 2037 (2003).
15. F.M. Borodich and L.M. Keer: Contact problems and depth sensing nanoindentation for frictionless and frictional boundary conditions. Int. J. Solids Struct. 41, 2479 (2004).
16. Y.L. Shen, J.J. Williams, G. Piotrowski, N. Chawla, and Y.L. Guo: Correlation between tensile and indentation behavior of particle-reinforced metal matrix composites: An experimental and numerical study. Acta Mater. 49, 3219 (2001).
17. T. Nakamuura, T. Wang, and S. Sampath: Determination of properties of graded materials by inverse analysis and instrumented indentation. Acta Mater. 48, 4293 (2000).
18. A.E. Giannakopoulos: Indentation of plastically graded substrates by sharp indentors. Int. J. Solids Struct. 39, 2495 (2002).
19. A.C. Fischer-Cripps: Analysis of instrumented indentation test data for functionally graded materials. Surf. Coat, Technol. 168, 136 (2003).
20. Y.P. Cao and J. Lu: A new scheme for computational modeling of conical indentation in plastically graded materials. J. Mater. Res. 19, 1703 (2004).
21. K.A. Padmanabhan, P. Mondal, and H. Hahn: Microindentation creep of porous nanocrystalline metallic and composite compacts. J. Mater. Sci. 40, 6113 (2005).
22. L. Lu, R. Schwaiger, Z.W. Shan, M. Dao, K. Lu, and S. Suresh: Nano-sized twins induce high sensitivity of flow stress in pure copper. Acta Mater. 53, 2169 (2005).
23. U. Ramamurty, S. Sridhar, A.E. Giannakopoulos, and S. Suresh: An experimental study of spherical indentation on piezoelectric materials. Acta Mater. 47, 2417 (1999).
24. A.E. Giannakopoulos and S. Suresh: Theory of indentation of piezoelectric materials. Acta Mater. 47, 2153 (1999).
25. A. Rar, G.M. Pharr, W.C. Oliver, E. Karapetian, and S.V. Kalinin: Piezoelectric nanoindentation. J. Mater. Res. 21, 552 (2006).
26. J.E. Bischoff: Static indentation of anisotropic biomaterials using axially asymmetric indenters - A computational study. J. Biomech. Eng. Trans. ASME 126, 498 (2004).
27. S. Gupta, F. Carrillo, M. Balooch, L. Pruitt, and C. Puttlitz: Simulated soft tissue nanoindentation: A finite element study. J. Mater. Res. 20, 1979 (2005).
28. R. Vaidynathan, M. Dao, G. Ravichandran, and S. Suresh: Study of mechanical deformation in bulk metallic glass through instrumented indentation. Acta Mater. 49, 3781 (2001).
29. C.A. Schuh and T.G. Nieh: A nanoindentation study of serrated flow in bulk metallic glasses. Acta Mater. 51, 87 (2003).
30. W.H. Li, T.H. Zhang, D.M. Xing, B.C. Wei, Y.R. Wang, and Y.D. Dong: Instrumented indentation study of plastic deformation in bulk metallic glasses. J. Mater. Res. 21, 75 (2006).
31. C. Su and L. Anand: Plane strain indentation of a Zr-based metallic glass: Experiments and numerical simulation. Acta Mater. 54, 179 (2006).
32. K. Gall, K. Juntunen, H.J. Maier, H. Sehitoglu, and Y.I. Chumlyakov: Instrumented micro-indentation of NiTi shape-memory alloys. Acta Mater. 49, 3205 (2001).
33. C.P. Frick, T.W. Lang, K. Spark, and K. Gall: Stress-induced martensitic transformations and shape memory at nanometer scales. Acta Mater. 54, 2223 (2006).
34. D.F. Bahr, K.A. Nibur, and K.R. Morasch: Nanoindentation and orientation imaging: Probing small volumes and thin films for mechanical properties. J. Electron. Mater. 31, 66 (2002).
35. A.M. Minor, E.T. Lilleodden, E.A. Stach, and J.W. Morris: In-situ transmission-electron-microscopy study of the nanoindentation behavior of Al. J. Electron. Mater. 31, 958 (2002).
36. D. Tabor: Hardness of Metals (Clarendon Press, Oxford, UK, 1951).
37. A.E. Giannakopoulos, P.L. Larsson, and R. Vestergaard: Analysis of Vickers indentation. Int. J. Solids Struct. 31, 2679 (1994).
38. P.L. Larsson, A.E. Giannakopoulos, E. Soderlund, D.J. Rowcliffe, and R. Vestergaard: Analysis of Berkovich indentation. Int. J. Solids Struct. 33, 221 (1996).
39. Y.T. Cheng and C.M. Cheng: Can stress-strain relationships be obtained from indentation curves using conical and pyramidal indenters? J. Mater. Res. 14, 3493 (1999).
40. H. Lan and T.A. Venkatesh: On the uniqueness and sensitivity issues in determining the elasto-plastic properties of power-law hardening materials through sharp and spherical indentation. (unpublished).
41. O. Casals and J. Alcala: The duality in mechanical property extractions from Vickers and Berkovich instrumented indentation experiments. Acta Mater. 53, 3545 (2005).
42. K.K. Tho, S. Swaddiwudhipong, Z.S. Liu, and K. Zeng: Simulation of instrumented indentation and material characterization. Mater. Sci. Eng., A 390, 202 (2005)
43. L. Wang and S.I. Rokhlin: On determination of material parameters from loading and unloading responses in nanoindentation with a single sharp indenter. J. Mater. Res. 21, 995 (2006).
44. N. Ogasawara, N. Chiba, and X. Chen: Measuring the plastic properties of bulk materials by single indentation test. Scripta Mater. 54, 65 (2006).
45. N. Chollacoop, M. Dao, and S. Suresh: Depth-sensing instrumented indentation with dual sharp indenters. Acta Mater. 51, 3713 (2003).
46. S. Swaddiwudhipong, K.K. Tho, Z.S. Liu, and K. Zeng: Material characterization based on dual indenters. Int. J. Solids Struct. 42, 69 (2005).
47. J.L. Bucaille, S. Stauss, E. Felder, and J. Michler: Determination of plastic properties of metals by instrumented indentation using different sharp indenters. Acta Mater. 51, 1663 (2003).
48. L. Wang, M. Ganor, and S.I. Rokhlin: Inverse scaling functions in nanoindentation with sharp indenters: Determination of material properties. J. Mater. Res. 20, 987 (2005).
49. Y.P. Cao and J. Lu: Depth-sensing instrumented indentation with dual sharp indenters: Stability analysis and corresponding regularization schemes. Acta Mater. 52, 1143 (2004).
50. Y.P. Cao, and J. Lu: A new method to extract the plastic properties of metal materials from an instrumented spherical indentation loading curve. Acta Mater. 52, 4023 (2004).
51. M. Zhao, N. Ogasawara, N. Chiba, and X. Chen: A new approach to measure the elastic-plastic properties of bulk materials using spherical indentation. Acta Mater. 54, 23 (2006).