Polysilazane precursors to advanced ceramics

American Ceramic Society Bulletin

Volumn 86, Issue 1, 2007, Pages 9301-9306

  Lukacs III, Alexander ^a  

^a KiON Corp   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 34247157453     PISSN: 00027812     EISSN: None     Source Type: Trade Journal    
DOI: None     Document Type: Article

References (51)

1. H. Matsuo, M. Kokubo, T. Ohbayashi, Y. Tashiro, T. Suzuki, M. Kizaki, H. Hashimoto, Y. Shimizu, T. Sakurai and H. Aoki, "Method and Composition for Forming Ceramics and Article Coated with the Ceramics," U.S. Pat. No. 5 747 623, 1998.
2. M. Pauckert, T. Vaahs and M. Brueck, Adv. Mater., 2 [9] 398-404 (1990).
3. K.J. Wynne and R.W. Rice, Ann. Rev. Mater. Sci., 14, 297-334 (1984).
4. R.M. Laine, Y.D. Blum, D. Tse and R. Glaser; pp. 124-42 in Inorganic and Organometallic Polymers, ACS Symposium Series 360. Edited by M. Zeldin, K.J. Wynne and H.R. Allcock. American Chemical Society, Washington, D.C., 1988.
5. D. Seyferth, G.H. Wiseman, J.M. Schwark, Y.-F. Yu and C.A. Poutasse; see Ref. 4, pp. 143-55.
6. G. Pouskouleli, Ceram. Int., 15, 213-29 (1989).
7. W.H. Atwell; pp. 593-606 in Silicon Based Polymer Science, Advances in Chemistry Series 224- Edited by J.M. Zeigler and F.W.G. Fearon. American Chemical Society, Washington, D.C., 1990.
8. J. Wan, M.J. Gasch and A.K. Mukherjee, "Effect of Ammonia Treatment on the Crystallization of Amorphous Silicon-Carbon-Nitrogen Ceramics Derived from Polymer Precursor Pyrolysis," J. Am. Ceram. Soc., 85 [3] 554-64 (2002).
9. J.-H. Lee, J.-H. Cho, J.-S. Choi and D.-J. Lee, "Spin-On Glass Composition and Method of Forming Silicon Oxide Layer in Semiconductor Manufacturing Process using the Same," U.S. Pat. Appl. No. US2004/0224537 A1.
10. R. Riedel, "Advanced Ceramics from Inorganic Polymers"; pp. 1-50 in Materials Science and Technology, Vol. 17B. Edited by R.W. Cahn, P. Hassen and E.J. Kramer. Wiley-VCH Verlag, Weinheim, Germany, 1996.
11. G. Thurn and F. Aldinger, "Compression Creep Behavior of Precursor-Derived Ceramics"; pp. 237-45 in Precursor-Derived Ceramics. Edited by J. Bill, F. Wakai and F. Aldinger. Wiley-VCH Verlag, Weinheim, Germany, 1999.
12. R. Riedel, L.M. Ruswisch, L. An and R. Raj, "Amorphous Silicoboron Carbonitride Ceramic with Very High Viscosity at Temperatures above 1500°C," J. Am. Ceram. Soc., 81 [12] 3341-44 (1998).
13. B. Baufeld, H. Gu, J. Bill, F. Wakai and F. Aldinger, "High-Temperature Deformation of Precursor-Derived Amorphous Si-B-C-N Ceramics," J. Eur. Ceram. Soc., 19, 2797-814 (1999).
14. R. Raj, L. An, S.R. Shah, R. Riedel, C. Fasel and H.-J. Kleebe, "Oxidation Kinetics of an Amorphous Silicon Carbonitride,"J. Am. Ceram. Soc., 84 [8] 1803-10 (2001).
15. S.R. Shah and R. Raj, "Nanoscale Densification Creep in Polymer-Derived Silicon Carbonitrides at 1350°C," J. Am. Ceram. Soc., 84 [10] 2208-12 (2001).
16. P.A. Ramakrishnan, Y.T. Wang, D. Balzar, L. An, C. Haluschka, R. Riedel and A.M. Hermann, "Silicoboron-Carbonitride Ceramics: A Class of High-Temperature, Dopable Electronic Materials," Appl. Phys. Lett., 78 [20] 3076-78 (2001).
17. L.-A. Liew, W. Zhang, L. An, S. Shah, R. Luo, Y. Liu, T. Cross, M.L. Dunn, V. Bright, J.W. Daily and R. Raj, "Ceramic MEMS, New Materials, Innovative Processing and Future Applications," Am. Ceram. Soc. Bull., 80 [5] 25-30 (2001).
18. L.-A. Liew, W. Zhang, V.M. Bright, L. An, M.L. Dunn and R. Raj, "Fabrication of SiCN Ceramic MEMS Using Injectable Polymer-Precursor Technique," Sens. Actuators A, 89, 64-70 (2001).
19. L.-A. Liew, T. Cross, V.M. Bright and R. Raj, "Fabrication of Novel Polysilazane MEMS Structures by Microcasting"; pp. 1-8 in Proceedings of 2001 ASME International Mechanical Engineering Congress and Exposition (Nov. 11-16, 2001, New York).
20. L.-A. Liew, Y. Liu, R. Luo, T. Cross, L. An, V.M. Bright, M.L. Dunn, J.W. Daily and R. Raj, Sens. Actuators A, 95, 120-34 (2002).
21. R.A. Saravanan, L.-A. Liew, V.M. Bright and R. Raj, "Integration of Ceramics Research with the Development of a Microsystem," J. Am. Ceram. Soc., 86 [7] 1217-19 (2003).
22. G. Feiertag, W. Ehrfeld, H. Freimuth, H. Kolle, H. Lehr, M. Schmidt, M.M. Sigalas, C.M. Soukoulis, G. Kiriakidis, T. Pedersen, J. Kuhl and W. Koenig, "Fabrication of Photonic Crystals by Deep X-ray Lithography," Appl. Phys. Lett., 71 [11] 1441-43(1997).
23. E. Kroke, Y.-L. Li, C. Konetschny, E. Lecomte, C. Fasel and R. Riedel, "Silazane-Derived Ceramics and Related Materials," Mater. Sci. Eng., 26, 97-199 (2000).
24. J. Seitz and J. Bill, "Production of Compact Polysilazane-Derived Si-C-N Ceramics by Plastic Forming," J. Mater. Sci. Lett., 15, 391-93 (1996).
25. J. Wan, M.J. Gasch and A.K. Mukherjee, "Silicon Carbonitride Ceramics Produced by Pyrolysis of Polymer Ceramic Precursor," J. Mater. Res., 15 [8] 1657-60 (2000).
26. J. Wan, M.J. Gasch and A.K. Mukherjee, "Silicon Nitride/Silicon Carbide Nanocomposites Derived from Polymer Precursor Pyrolysis"; pp. 276-79 in Proceedings of International Conference on Engineering and Technological Sciences 2000 (Beijing, China, 2000). Edited by J. Song and R. Yin. New World Press, Beijing, 2000.
27. H.-J. Kleebe, D. Suttor, H. Mueller and G. Ziegler, "Decomposition- Crystallization of Polymer-Derived Si-C-N Ceramics," J. Am. Ceram. Soc., 81 [11] 2971-77 (1998).
28. I.-K. Sung, M.M. Christian, D.-P. Kim and P.J.A. Kenis, "Tailored Macroporous SiCN and SiC Structures for High-Temperature Fuel Reforming," Adv. Funct. Mater., 15, 1336-42 (2005).
29. W. Verbeek, "Production of Shaped Articles of Homogeneous Mixtures of Silicon Carbide and Nitride," U.S. Pat. No. 3 853 567, 1974.
30. G. Winter, W. Verbeek and M. Mansmann, "Production of Shaped Articles of Silicon Carbide and Silicon Nitride," U.S. Pat. No. 3 892 583, 1975.
31. B.G. Penn, J.G. Daniels, F.E. Ledbetter IIII and J.M. Clemons, "Preparation of Silicon Carbide-Silicon Nitride Fibers by the Pyrolysis of Polycarbosilazane Precursors: A Review," Polym. Eng. Sci., 26 [17] 1191-94 (1986).
32. 32A. Saha, S.R. Shah and R. Raj, "Amorphous Silicon Carbonitirde Fibers Drawn from Alkoxide Modified Ceraset™," J. Am. Ceram. Soc., 86 [8] 1443-45 (2003).
33. 2 Fiber Prepared from Alkoxide-Modified Silazane," J. Am. Ceram. Soc., 87 [8] 1556-58 (2004).
34. A. Dhamme, W. Xu, B.G. Fookes, Y. Fan, L. Zhang, S. Burton, J. Hu, J. Ford and L. An, "Polymer-Ceramic Conversion of Liquid Polyaluminasilazanes for SiAlCN Ceramics," J. Am. Ceram. Soc., 88 [9] 2415 9 (2005).
35. Y. Wang, W. Fei and L. An, "Oxidation/Corrosion of Polymer-Derived SiAlCN Ceramics in Water Vapor," J. Am. Ceram. Soc., 89 [3] 1079-82 (2006).
36. D.V. Miller, D.L. Pommell and G.H. Schiroky, "Fabrication and Properties of SiC/SiC Composites Derived from Ceraset™ SN Preceramic Polymer," Ceram. Eng. Sci. Proc., 18 (1997).
37. Z.S. Rak, "A Process for Cf/SiC Composites Using Liquid Polymer Infiltration," J. Am. Ceram. Soc., 84 [10] 2235-39 (2001).
38. 4 Matrix," Adv. Eng. Mater., 2 [8] 503-507 (2000).
39. Z.S. Rak, "Cf/SiC Composites by a Novel Manufacturing Method," ECN-RX-00-040 (Project No. 7.6266, as part of EU Grant under Contract No 32.0176, and ECN TS&C funding in collaboration with the Institute for Advanced Materials (JRC) in Petten).
40. M.K. Aghajanian, J.W. Hinton, A. Lukacs III, J.A. Jensen, M.S. Nawkird and R.K. Dwivedi, "Methods for Fabricating Shapes by use of Organometallic, Ceramic Precursor Binders," U.S. Pat. No. 5 641 817, 1997.
41. D.J. Landini and R.L.K. Matsumoto, "Method for Processing Silicon Carbide Preforms Having a High-Temperature Boron Nitride Coating," U.S. Pat. Appl. No. US2004/0115348 (June 17, 2004).
42. 4 Matrix Composites, Coatings and Joints from Filled Pre-Ceramic Polymer Systems," Environmental Barrier Coatings Workshop, Nashville, Tenn., 2002.
43. P. Colombo, R. Silberglitt and G.A. Danko, "Microwave Joining of SiC," Advanced Industrial Materials Annual Review Meeting, Jackson Hole, Wyo., June 23, 1998.
44. C.A. Lewinsohn and S. Elangovan, "Progress in Seals for Solid Oxide Fuel Cells," U.S. Dept. of Energy Phase I SBIR DE-FG03-02ER83385.
45. C.R. Bearinger, R.C. Camilletti, G. Chandra, T.E. Gentle and L.A. Haluska, U.S. Pat. No. 5 904 791, 1999.
46. 46A. Kojima, S. Hoshii and T. Muto, "Characteristics of Polysilazane Compound and Its Application as Coating for Carbon Material," J. Mater. Sci. Lett., 21, 757-60 (2002).
47. J. Bill and D. Heimann, "Polymer-Derived Ceramic Coatings on C/C-SiC Composites," J. Eur. Ceram. Soc., 16, 1115-20 (1996).
48. C. Duston, S. Seghi, R. Watts and B. Carney, "Strength Enhancement and Application Development of Carbon Foam for Thermal Management Systems," USAF/ML SBIR Contract No. F33615-03-M-5039 and U.S. Dept. of Energy Grant No. DE-FG02-03ER83627.
49. 4 Nanobelts Grown by Pyrolysis of Polyureasilazane with Iron Catalyst," J. Am. Ceram. Soc., 466 (2005).
50. 4/SiC Nanocomposites from a Poly(urea-silazane) Ceramic Precursor," J. Mater. Res., 16 [11] 3274-86 (2001).
51. M. Kamperman, C.B.W. Garcia, P. Du, H. Ow and U. Wiesner, "Ordered Mesoporous Ceramics Stable up to 1500°C from Diblock Copolymer Mesophases," J. Am. Chem. Soc., 126, 14708-709 (2004).