Control of redundant robot manipulators theory and experiments

Lecture Notes in Control and Information Sciences

Volumn 316, Issue , 2005, Pages 1-201

  Patel, R V ^a   Shadpey, F ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 33947688642     PISSN: 01708643     EISSN: None     Source Type: Book Series    
DOI: None     Document Type: Article

References (97)

1. R. Anderson, and M.W. Spong, "Hybrid impedance control of robotic manipulators", Proc. IEEE Int. Conf. on Robotics and Automation, pp. 1073-1080, 1987.
2. N. Adachi, Z.X. Peng, and S. Nakajima, "Compliant motion control of redundant manipulators", IEEE/RSJ Workshop on Intell. Rob. Sys., pp. 137-141, 1991.
3. J. Angeles, F. Ranjbaran, and R.V. Patel, "On the design of the kinematic structure of seven-axes redundant manipulators for maximum conditioning", Proc. IEEE International Conf. Robotics and Automation, pp. A94-499, 1992.
4. J. Angeles, "The Application of Dual Algebra to Kinematic Analysis", in Angeles, J. and Zakhariev, E. (editors), Computational Methods in Mechanical Systems, Springer-Verlag, Heidelberg, vol. 161, pp. 3-31, 1998.
5. J. Angeles, Fundamentals of Robotic Mechanical Systems: Theory, Methods, and Algorithms, 2nd Edition, Springer-Verlag, New York, 2002.
6. J. Baillieul, "Avoiding Obstacles and resolving kinematic redundancy", Proc. IEEE Int. Conf. on Robotics and Automation, pp. 1698-1704, 1986.
7. S. Borner, and R. B. Kelley, "A novel representation for planning 3-D collision free paths", IEEE Transaction on Syst., Man, and Cybernetics, vol. 20, no. 6, pp. 1337-1351, 1990.
8. P. Borrel, "Contribution a la modelisation geometrique des robots manipulateurs : Application a la conception assistee par l'ordinateur", These d'Etat, USTL, Montpellier, France, July 1986.
9. I.J. Bryson, Software Architecture and Associated Design and Implementation Issues for Multiple-Robot Simulation and Vizualization, M.E.Sc. Thesis, University of Western Ontario, London, Ontario, 2000.
10. I.J. Bryson and R.V. Patel, "A modular software architecture for robotic simulation and visualization", 31st Int. Symposium on Robotics (ISR2000), Montreal, Canada, May 14-17, 2000.
11. Y. Bu and S. Cameron, "Active motion planning and collision avoidance for redundant manipulators", 1997 IEEE Int. Symposium on Assembly and Task Planning, pp. 13-18, Aug. 1997.
12. B.W. Char, et al., Maple V Language Reference Manual, Springer-Verlag, New York, 1991
13. S.L. Chiu, "Task compatibility of manipulator postures", Int. Journal of Robotics Research, vol. 7, no. 5, pp 13-21, Oct. 1988.
14. R. Colbaugh, H. Seraji, and K. Glass, "Obstacle avoidance of redundant robots using configuration control", Int. Journal of Robotics Research, vol. 6, pp. 721-744, 1989.
15. Colombina, F. Didot, G. Magnani, and A. Rusconi, "External servicing testbed for automation and robotics", IEEE Robotics & Automation Magazine, Mar. 1996, pp. 13-23
16. J.J. Craig, Introduction to Robotics: Mechanics and Control, 2nd Edition, Addison Wesley, 1995.
17. D. Dawson and Z. Qu, "Comments on impedance control with adaptation for robotic manipulators", IEEE Trans, on Robotics and Automation, vol 7, no. 6, Dec. 1991.
18. A. De Luca, "Zero Dynamics in Robotic Systems", in Nonlinear Synthesis, C. I. Byrnes and A. Kurzhanski (Eds.), Progress in Systems and Control Series, Birkhauser, Boston, MA, 1991.
19. R.V. Dubey, J.A. Euler, and S.M. Babock, " An efficient gradient projection optimization scheme for a seven-degree-of-freedom redundant robot with spherical wrist", Proc. IEEE Int. Conf. on Robotics and Automation, pp. 28-36, Philadelphia, PA, 1988.
20. J. Duffy, "The fallacy of modern hybrid control theory that is based on "orthogonal complements" of twist and wrench spaces", Journal of Robotic Systems, vol. 7, no. 2, pp. 139-144, 1990.
21. O. Egeland, "Task-space tracking with redundant manipulators", IEEE Journal of Robotics and Automation, vol. 3, pp. 471-475, 1987.
22. Q.J, Ge, "An inverse design algorithm for a G2 interpolating spline motion", in Advances in Robot Kinematics and Computational Geometry, J. Lenarcic and B. Ravani (eds.), Kluwer Academic Publishers, Norwell, MA, pp. 81-90, 1994
23. M.W. Gertz, J. Kim, and P. Khosla, "Exploiting redundancy to reduce impact force", 1EEE/RSJ Workshop on Intell. Rob, Sys, pp. 179-184, 1991.
24. K. Glass, R. Colbaugh, D. Lim, and H. Seraji, "Real-time Collision avoidancefor redundant manipulators", IEEE Transaction on Robotics and Automation, pp. 448-457, vol 11. no. 10, 1995.
25. G.H. Golub and C.F. Van Loan, Matrix Computations, 2nd ed., John Hopkins Univ. Press, Baltimore, 1989.
26. M.A. Gonzalez-Palacios, J. Angeles and F. Ranjbaran, "The kinematic synthesis of serial manipulators with a prescribed Jacobian", Proc. IEEE Int. Conf. Robotics Automat., Atlanta, Georgia, 1993, vol. 1, pp 450-455.
27. Y. Han, L. Liu, R. Lingarkar, N. Sinha, and M. Elbestawi, "Adaptive Control of Constrained Robotic manipulators", Int. Journal of Robotics Research, vol. 7, no. 2, pp. 50-56, 1992.
28. T. Hasegawa and H. Terasaki, "Collision avoidance: Divide-and-conquer approach by space characterization and intermediate goals", IEEE Transaction on Syst., Man, and Cybernetics, vol. 18, no. 3, pp. 337-347, 1988.
29. H. Hattori and K. Ohnishi, "A realization of compliant motion by decentralized control in redundant manipulators", Proc. IEEE/ ASME Int. Conf. on Advanced Intelligent Mechatronics, Como, Italy, pp. 799-803, 2001.
30. N. Hogan, "Impedance control: An approach to manipulation", ASME Journal of Dynamic Systems, Measurment, and Control, vol. 107, pp. 8-15, 1985.
31. J.M. Hollerbach, and K.C. Suh, "Redundancy resolution for manipulators through torque optimization", Int. Journal of Robotics Research, vol. 3, pp. 308-316, 1987.
32. P. Hsu, J. Hauser, and S. Sastry, "Dynamic Control of Redundant Manipulators", Journal of Robotic Systems, vol. 6, pp. 133-148, 1989.
33. D.G Hunter, "An overview of the Space Station Special Purpose Dexterous Manipulator", National Research Council Canada, NRCC no. 28817, Issue A, 7 April 1988
34. H. Kazerooni., T.B. Sheridan, and P.K. Houpt, "Robust compliant motion for manipulators: Part I: The fundamental concepts of compliant motion", IEEE Trans. on Robotics and Automation, vol. 2, no. 2, pp.83-92, 1986.
35. K. Kazerounian and Z. Wang, "Global versus local optimization in redundancy resolution of robotics manipulators", Int. Journal of Robotics Research, vol. 7. no. 5, pp.3-12, 1988.
36. P. Khosla and R.V. Volpe, "Superquadric artificial potentials for an obstacle avoidance approach", Proc. IEEE Int. Conf. on Robotics and Automation, pp. 1778-1784, 1988.
37. C.A. Klein and C.H. Hung, "Review of pseudoinverse control for use with kinematically redundant manipulators", IEEE Trans. on Systems, Man, and Cybernetics, vol. 13, pp. 245-250, 1983.
38. C.A. Klein, "Use of redundancy in design of robotic systems", Proc. 2nd Int. Symp. Robotic Res., Kyoto, Japan, 1984.
39. Z. Lin, R.V. Patel, and C.A. Balafoutis, "Augmented impedance control: An approach to impact reduction for kinematically redundant manipulators", Journal of Robotic Systems, vol. 12, pp. 301313,1995.
40. G.J. Liu and A.A. Goldenberg, "Robust hybrid impedance control of robot manipulators", Proc. IEEE Int. Conf. on Robotics and Automation, pp.287-292, 1991.
41. W.S. Lu, and Q.H. Meng, "Impedance control with adaptation for robotic manipulators", IEEE Trans. on Robotics and Automation, vol 7, no. 3, June 1991.
42. J.Y.S. Luh, M.W. Walker, and R.P.C. Paul, "Resolved-acceleration of mechanical manipulators", IEEE Transaction on Automatic Control, vol. AC-25, no. 3, pp. 468-474, June 1980.
43. A.A. Maciejewski and C.A. Klein, "The singular value decomposition: Computation and application to robotics", Int. Journal of Robotics Research, vol. 8, no. 6, Dec. 1989.
44. Matlab External Interface Guide for UNIX Workstation, The MathWorks Inc., 1992.
45. N.H. McClamroch and D. Wang, "Feedback stablization and tracking in constrained robots", IEEE Trans. on Automatic Control, vol. 33, no. 5, pp. 419-426, 1988.
46. J.K. Mills, "Hybrid Control: A constrained motion perspective", Journal of Robotic Systems, vol. 8, NO. 2, pp. 135-158, 1991.
47. Y. Nakamura and H. Hanafusa, "Inverse kinematic solutions with singularity robustness for manipulator control", ASME Journal of Dynamic Systems, Measurment, and Control, vol. 108, pp. 163-171, 1986.
48. Y. Nakamura and H. Hanafusa, "Optimal redundancy control of robot manipulators", Int. Journal of Robotics Research, vol. 6, no. 1, pp. 32-42, 1987.
49. K.S. Narendra and A.M. Annaswamy, Stable Adaptive Systems, Prentice Hall, Englewood cliffs, NJ, 1989.
50. B. Nemec and L. Zlajpah, "Force control of redundant robots in unstructured environments", IEEE Trans. on Industrial Electronics, vol. 49, no. 1, pp. 233-240, 2002.
51. W.S. Newman and M.E. Dohring, "Augmented impedance control: An approach to compliant control of kinematically redundant manipulators", Proc. IEEE International Conf. Robotics and Automation, pp. 30-35, 1991.
52. G. Niemeyer and J.J. Slotine, "Performance in adaptive manipulator control", Int. Journal of Robotics Research, vol. 10, no. 2, April 1991.
53. Y. Oh, W.K. Chung, Y. Youm, and I.H. Suh, "Motion/force decomposition of redundant manipulators and its application to hybrid impedance control", Proc. IEEE Int. Conf. on Robotics and Automation, Leuven, Belgium, pp. 1441-1446, 1998.
54. R. Ortega and M. Spong, "Adaptive motion control of rigid robots: A tutorial." In Proc. IEEE conf. on Decision and Control, Austin, Texas, 1988.
55. R.P.C. Paul, Robot Manipulators, MIT Press, Cambridge, MA, pp. 28-35, 1981.
56. M. Raibert and J.J. Craig, "Hybrid position-force control of manipulators", ASME Journal of Dynamic Systems, Measurment, and Control, vol. 102, pp. 126-133, 1981.
57. F. Ranjbaran, J. Angeles, M.A. Gonzalez-Palacios, and R.V. Patel, "The mechanical design of a seven-axes manipulator with kinematic isotropy", Journal of Robotics and Intelligent Systems, vol. 13, pp. 1-21, 1995.
58. REACT in IRIX 5.3, Technical Report, Silicon Graphics Inc., Dec. 1994.
59. N. Sadegh, and R. Horowitz, "Stability analysis of an adaptive controller for robotic manipulator", in Proc. IEEE Int. Conf. Robotics and Automation.
60. K.J. Salisbury, "Active stiffness control of manipulators in Cartesian coordinates", Proc. IEEE Int. Conf. on Robotics and Automation, pp. 95-100, 1980.
61. L. Sciavicco and B. Siciliano, "A solution algorithm to the inverse kinematic problem of redundant manipulators", IEEE Journal of Robotics and Automation, vol. 4, pp. 403-410, 1988.
62. L. Sciavicco and B. Siciliano, "An algorithm for reachable workspace for 2R and 3R planar pair mechanical arms", Proc. IEEE Int. Conf. Robotics and Automation, vol. 1, pp 628-629, Philadelphia, PA.1988.
63. H. Seraji, "Configuration control of redundant manipulators: Theory and implementation", IEEE Transactions on Robotics and Automation, vol. 5, pp. 472-490, 1989.
64. H. Seraji and R. Colbaugh, "Improved Configuration Control for redundant robots", Journal of Robotic Systems, vol. 7, no. 6, pp. 897-928, 1990.
65. H. Seraji and R. Colbaugh, "Singularity-robustness and task prioritization in configuration control of redundant robots", 29th IEEE Conf. on Decision and Control, pp. 3089-3095,1990.
66. H. Seraji, "Task options for redundancy resolution using configuration control", 30th IEEE Conf. on Decision and Control, pp. 27932798,1991.
67. H. Seraji, D. Lim, and R. Steele, "Experiments in contact control", Journal of Robotic Systems, vol. 13, no. 2, pp. 53 - 73, 1996.
68. H. Seraji, R. Steele, and R. Ivlev, "Sensor-based collision avoidance: Theory and experiments", Journal of Robotic Systems, vol. 13, no. 9, pp. 571-586, 1996.
69. H. Seraji and R. Steele, "Nonlinear contact control for space station dexterous arms", Proc. IEEE Int. Conf. on Robotics and Automation, Leuven, Belgium, pp. 899-906, 1998.
70. H. Seraji and B. Bon, "Real-time collision avoidance for positioncontrolled manipulators", IEEE Trans. on Robot. and Automat., vol. 15, no. 4, pp. 670-677, 1999.
71. F. Shadpey, C. Tessier, R.V. Patel, and A. Robins, "A trajectory planning and obstacle avoidance system for kinematically redundant manipulators", CASI Conference on Astronautics, Ottawa, Nov. 1994.
72. F. Shadpey, R.V. Patel, C. Balafoutis, and C. Tessier, " Compliant Motion Control and Redundancy Resolution for Kinematically Redundant Manipulators", American Control Conference, Seattle, WA,June 1995.
73. F. Shadpey and R.V. Patel, "Compliant motion control with selfmotion Stabilization for kinematically redundant manipulators", Third IASTED Int. Conf. on Robotics and Manufacturing, Cancun, Mexico, June 1995.
74. F. Shadpey and R.V. Patel, "Adaptive Compliant Motion Control of Kinematically Redundant Manipulators", IEEE Conf. on Decision and Control, Dec. 1995.
75. F. Shadpey, C. Tessier, R.V. Patel, B. Langlois, and A. Robins, "A trajectory planning and object avoidance system for kinematically redundant manipulators: An experimental evaluation", AAS/AIAA American Astrodynamics Conference, Aug. 1995, Halifax, Canada.
76. F. Shadpey, F. Ranjbaran, R.V. Patel, and J. Angeles, "A compact cylinder-cylinder collision avoidance scheme for redundant manipulators", Sixth Int. Symp. on Robotics and Manufacturing (ISRAM), Montpellier, France, May, 1996.
77. F. Shadpey, M. Noorhosseini, I. Bryson, and R.V. Patel, "An integrated robotic development environment for task planning and obstacle Avoidance", Third ASME Conf. on Eng. System Design & Analysis, Montpellier, France, July 1996.
78. F. Shadpey and R.V. Patel, "Robot Dynamic Modelling (RDM) Software: User's Guide", Concordia University, Montreal, Canada, Feb. 1997.
79. K. Shoemake, "Animating rotation with quaternion curves", ACM Siggraph, vol. 19, no. 3, pp. 245-254, 1985.
80. P.R. Sinha and A.A. Goldenberg, "A unified theory for hybrid control of manipulators", Proc. IFAC 12th World Congress, Sydney, Australia, 1993.
81. J.J. Slotine and W. Li, "On the Adaptive Control of Robot Manipulators", Int. Journal of Robotics Research, vol. 6, no. 3, pp. 49-59, 1987.
82. J.J. Slotine, and W. Li, Applied Nonlinear Control, Prentice Hall, Englewood cliffs, NJ, 1991.
83. D.B. Stewart, R.A. Volpe, and P.K. Khosla, "Integration of Real-Time Software Module for Reconfigurable Sensor-Based Control Systems", Proc. IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '92), Raleigh, North Carolina, pp. 325-332,1992.
84. K.C. Suh and J.M. Hollerbach, "Local versus global torque optimization of redundant manipulators", Proc. IEEE Int. Conf. on Robotics and Automation, pp. 619-624, 1987.
85. M. Tandirci, J. Angeles, and F. Ranjbaran, "The characteristic point and characteristic length of robotic manipulators", 22nd ASME Biennial Mechanics Conference, Sep. 13-16, Scottsdale, AZ, vol. 45, pp.203-208, 1992.
86. C.-P. Teng and J. Angeles, "A sequential-quadratic programming algorithm using orthogonal decomposition with Gerschgorin stabilization", ASME J. Mechanical Design, vol. 123, Dec. 2001, pp. 501-509.
87. C. Tessier et al., Trajectory Planning and Object Avoidance (STEAR 5) - Phase II, Final Report, vol. 1, DSS Canada, Contract no. 9F0062-0107/01-SW, 1995.
88. T.D. Tuttle and W.P Seering, "A nonlinear model of a harmonic drive gear transmission", IEEE Trans. Rob. and Aut., vol. 12, no., 3, June 1996.
89. R.S. Varga, Matrix Iterative Analysis, Springer-Verlag, New York, 2000.
90. G.R., Veldkamp, "On the use of dual numbers, vectors and matrices in instantaneous, spatial kinematics", Mechanism and Machine Theory, vol. 11, pp. 141-156, 1976.
91. I.D. Walker, "The use of kinematic redundancy in reducing impact and contact effects in manipulation", Proc. IEEE International Conf. Robotics and Automation, pp. 434-439, 1990.
92. C.W. Wampler, "Manipulator inverse kinematic solution based on vector formulation and damped least-squares methods", IEEE Trans, on Systems, Man, and Cybernetics, vol. 16, no. 1. pp. 93-101, 1986.
93. D.S. Watkins, Fundamentals of Matrix Computations, 2nd Edition, John Wiley & Sons, New York, 2002.
94. D.E. Whitney, "Historical perspective and state of the art in robot force control", Int. Journal of Robotics Research, vol. 6, no. 1, Dec. 1987.
95. A.T. Yang and F. Freudenstein "Application of dual-number quaternion algebra to the analysis of spatial mechanisms", Trans. ASME J. Appl. Mech., pp. 300-308, 1964.
96. T. Yoshikawa, "Dynamic hybrid position/force control of robot manipulators", IEEE Journal of Robotics and Automation, vol. 3, no. 5, pp. 386-392, 1987.
97. T. Yoshikawa, "Analysis and control of robot manipulators with redundancy", Rob. Res., Ist Int. Symp., MIT Press, pp. 735-747, 1984.