Review of the current situation of ultra-precision machining

Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering

Volumn 43, Issue 1, 2007, Pages 35-48

  Yuan, Julong ^a   Wang, Zhiwei ^a   Wen, Donghui ^a   Lu, Binghai ^a   Dai, Yong ^a  

^a ZHEJIANG UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Abrasive machining; Semibonded abrasive machining; Ultra precision machining

Indexed keywords

ABRASIVE CUTTING; CHEMICAL MECHANICAL POLISHING; CUTTING; ELECTROLYTIC POLISHING; GRINDING (MACHINING); GRINDING WHEELS; MECHANICAL ENGINEERING; NANOTECHNOLOGY; POLISHING; PRECISION ENGINEERING;

ANGSTROM RANGE; BRITTLE MATERIALS; CERAMICS; CURRENT SITUATION; ECONOMIC MANUFACTURE; ELECTRONIC APPLICATION; FORM ACCURACY; GLASSES; MECHANICAL; NATURE DAMAGE; OPTICAL; SEMIBONDED ABRASIVE MACHINING; SUBSURFACE DAMAGE; SURFACE FINISH ACCURACY; SURFACE INTEGRITY; ULTRAPRECISION CUTTING; ULTRAPRECISION GRINDING; ULTRAPRECISION MACHINING; ULTRAPRECISION POLISHING;

MACHINING;

EID: 33947120272     PISSN: 05776686     EISSN: None     Source Type: Journal    
DOI: 10.3901/JME.2007.01.035     Document Type: Review

References (75)

1. National Nanotechnology Initiative. About the NNI[EB/ OL]. http://www.nano.gov/html/about/home_about.html. 2006.
2. Nanotechnology Researchers Network Center of Japan. What's nanotechnology support project[EB/OL]. http://www.nanonet.go.jp/english/aboutus/prject.html. 2006.
3. TANIGUCHI N. Current status in and future trends of ultraprecision machining and ultrafine materials processing[J]. Ann. CIRP, 1983, 32(2): 573-582.
4. HAHN P O. The 300 mm silicon wafer-A cost and technology challenge[J]. Microelectronic Engineering, 2001, 56(1-2): 3-13.
5. BYRNE G, DORNFELD D, DENKENA B. Advancing cutting technology[J], Ann. CIRP. 2003, 52(2): 483-507.
6. RAGHUNANDAN M, KOMANDURI R. Finishing of silicon nitride balls for high-speed bearing applications[J]. Trans. ASME J. Manf. Sci. and Eng., 1998, 120: 376-386.
7. JIANG M, KOMANDURI R. Chemical mechanical polishing (CMP) in magnetic float polishing (MFP) of advanced ceramic (silicon nitride) and glass (silicon dioxide)[J]. Key Engineering Materials, 2001, 202-203: 1-14.
8. KOMANDURI R, LUCCA D A, TANI Y, et al. Technological advances in fine abrasive process[J]. Ann. CIRP, 1997, 46(2): 545-595.
9. TANNAKA T. New development of metal bonded diamond wheel with pore by the growth of bonding bridge[J]. JSPE, 1992, 26(1): 27-32.
10. CHATTOPADHYA A K. Induction brazing of diamond with diamond Ni-Cr hadfacing alloy under argon atmosphere[J]. Surface and Coating Technology, 1991(5): 293-298.
11. OHMORI H, NAKAGAWA T. Mirror surface grinding of silicon wafers with electrolytic in-process dressing[J]. Ann. CIRP, 1990, 39(1): 329-332.
12. KRAMER D, REHSTEINE F, SCHUMACHER B. ECD (electrochemical in-process controlled dressing), a new method for grinding of modern high-performance cutting materials to highest quality[J]. Ann. CIRP, 1999, 48(1): 265-268.
13. WANG Y, ZHOU X J, HU D J. An experimental investigation of dry-electrical discharge assisted truing and dressing of metal bonded diamond wheel[J]. International Journal of Machine Tools and Manufacture, 2006, 46(3-4): 333-342.
14. SUZUKI K, ASANO S, UEMATSU T, et al. Development of a simplified electrochemical dressing method with twin electrodes[J]. Ann. CIRP, 1991, 40(1): 363-366.
15. BHATTACHARYYA B, DOLOI B N, SORKHEL S K. Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials[J]. Journal of Materials Processing Technology, 1999, 95: 145-154.
16. ZHANG C, SHIN Y C. A novel laser-assisted truing and dressing technique for vitrified CBN wheels[J]. International Journal of Machine Tools and Manufacture, 2002, 42(7): 825-835.
17. HIRAO M, IZAWA M. Water-jet in-process dressing (1st report)-dressing property and jet pressure[J]. JSPE, 1998, 9: 1335-1339.
18. IKUSE Y, NONOKAWA T, KAWABATAN N, et al. Development of new ultrasonic dressing equipment[J]. JSPE, 1996, 30(3): 217-222 .
19. OHMORI H, NAKAGAWA T. Analysis of mirror surface generation of hard and brittle materials by ELID (electrolytic in-process dressing) grinding with superfine grain metallic bond wheels[J]. Ann. CIRP, 1995, 44(1): 287-290.
20. HAGIUDA Y, KARIKOMI K, NAKAGAWA T. Manufacturing of a sintered cast iron lapping plate with fixed abrasives and its lapping abilities[J]. Ann. CIRP, 1981, 30(1): 227-232.
21. EGGER R, LONGERICH W, PREISING D. Fine grinding for the generation of high precision surfaces[C]//9th International Precision Engineering Seminar, Braunschweig. 1997: 558-561.
22. TONSHOFF H K, EGGER R, LONGERICH W, et al. Supperfinishing ceramics fine grinding can replace lapping for a superior finish[J]. Manufacturing Engineering, 1998, 120(2): 52-59.
23. YASUNAGA N, OBARA A, TARUMI N. Study of mechanochemical effect on wear and its application to surface finishing[J]. Res. Electrotech. Lab., 1977, 776: 50-134.
24. ATEIGERWALD J M, MURARKA S P, GUTMANN R J. Chemical mechanical planarization of microelectronic materials[M]. A Wiley-Interscience Publication, 1996.
25. OGITA Y, KOBAYASHI K, Daio H. Photoconductivity characterization of silicon wafer mirror-polishing subsurface damage related to gate oxide integrity[J]. Journal of Crystal Growth, 2000, 210(1-3): 36-39.
26. KASAI T, HORIO K, KARAKI-DOY T, et al. Improvement conventional polishing conditions for obtain super smooth surface of compound semiconductor wafers[J]. Ann. CIRP, 1990, 39(1): 297-301.
27. ADACHI K, HUTCHINGS I M. Wear-mode mapping for the micro-scale abrasion test[J]. Wear, 2003, 255(1-6): 23-29.
28. TSUWA H, IKAWA N, Mori Y, et al. Numerically controlled elastic emission machine[J]. Annals of CIRP. 1979, 28(1): 193-197.
29. MORI Y, YAMAMURA K, ENDO K, et al. Creation of perfect surfaces[J]. Journal of Crystal Growth, 2005, 275: 39-50.
30. WATANABE J, SUZUKI J. High precision polishing of semiconductor materials using hydrodynamic principle[J]. Ann. CIRP, 1981, 30(1): 91-95.
31. NAMBA Y, TSUWA H. Ultra-fine finishing of sapphire single crystal[J]. Ann. CIRP, 1977, 26(1): 325-329.
32. WU X S, CHEN W Y, WANG L J, et al. Non-abrasive polishing of glass[J]. International Journal of Machine Tools and Manufacture, 2002, 42: 449-456.
33. FOX M, AGRAWAL K, SHINMURA T, et al. Magnetic abrasive finishing of rollers[J]. Ann. CIRP, 1994, 43(1): 181-184.
34. TANI Y, KAWATA K. Development of High-efficient fine finishing process using magnetic fluid[J]. Ann. CIRP, 1984, 33(1): 217-220.
35. KORDONSKY W I, WILLIAM I, PROKHOROV I V, et al. Magnetorheological polishing devices and methods[P]. US Patent 5449313, 1995.
36. UMEHARA N, KATO K: Principles of magnetic fluid grinding of ceramic balls[J]. Appl. Electromagn. Mater, 1990, 1: 37-43.
37. CHILDS T H C, YOON H J. Magnetic fluid grinding cell design[J]. Ann. CIRP, 1992, 41(1): 343-346.
38. JACOBS S D, YANG F Q, FESS E, et al. Magnetorheological finishing of IR materials[C]//Proc. SPIE, San Diego, CA, USA, 1997, 3134: 258-269.
39. BINGHAM R G, WALKER D D, KIM D H, et al. Novel automated process for aspheric surfaces[C]//Proc. SPIE, San Diego, CA, USA, 2000, 4093: 445-450.
40. WALKER D D, BROOKS D, FREEMAN R, et al. First aspheric form and texture results from a production machine embodying the precession processp[C]//Proc. SPIE, San Diego, CA, USA, 2001, 4451: 267-276.
41. MARTIN H M, ALLEN R G, BURGE J H, et al. Fabrication of mirrors for the Magellan telescopes and the Large[C]//Binocular Telescope, Proc. SPIE, Waikoloa, HI, USA, 2003, 4837: 1-10.
42. HUANG C A, LIN W, LIN S C. The electrochemical polishing behaviour of P/M high-speed steel (ASP 23) in perchloric-acetic mixed acids[J]. Corrosion Science, 2003, 45(11): 2627-2638.
43. LI X, GOODHUE W D, SANTEUFEIMIO C, et al. Gas cluster ion beam processing of gallium antimonide wafers for surface and sub-surface damage reduction[J]. Applied Surface Science, 2003, 218(1-4): 251-258.
44. BOLLINGER L D, STEINBERG G, ZAROWING C B. Rapid optical figuring of asperical surface with plasmaassisted chemical ething (PACE)[C]//Proc. SPIE, Rochester, NY USA, 1992, 1618: 14-17.
45. PHILIP J, JAYAKUMAR T. Laser based etching technique for metallographic and ceramography[J]. Materials Science and Engineering A, 2002, 338(1-2): 17-23.
46. PEDRAZA A. J. UV Laser Polishing of Thick Diamond Films for IR Windows[J]. Applied Surface Science, 1999, 138(1): 135-139.
47. UDREA M, ORUM H, ALACCAKIR A. Laser polishing of optical fiber end surface[J]. Opt. Eng, 2001, 40(9): 2026.
48. SHIMADA K, A KAGAMI Y, FUJITA T, et al. Characteristics of magnetic compound fluid (MCF) in a rotating rheometer[J]. Journal of Magnetism and Magnetic Materials, 2002, 252: 235-237.
49. SHIMADA K, WU Y B, WONG Y C. Effect of magnetic cluster and magnetic field on polishing using magnetic compound fluid (MCF)[J]. Journal of Magnetism and Magnetic Materials, 2003, 262: 242-247.
50. YAN B H, CHANG G W, CHEN T J, et al. Electrolytic magnetic abrasive finishing[J]. International Journal of Machine Tools and Manufacture, 2003, 43: 1355-1366.
51. JHA S, JAIN V K. Design and development of the magnetorheological abrasive flow finishing (MRAFF) process[J]. International Journal of Machine Tools and Manufacture, 2004, 44: 1019-1029.