Cementable implant crowns composed of cast superstructure frameworks luted to electroformed primary copings: An in vitro retention study

Clinical Oral Implants Research

Volumn 18, Issue 1, 2007, Pages 108-113

  Di Felice, Roberto ^a   Rappelli, Giorgio ^a   Camaioni, Emanuele ^b   Cattani, Maria ^c   Meyer, Jean Marc ^c   Belser, Urs C ^c  

^a UNIVERSITÀ POLITECNICA DELLE MARCHE   (Italy)

^b University of Geneva ^*

^c UNIVERSITY OF GENEVA   (Switzerland)

Author keywords

Auro galva crowns; Casting retention; ITI implants; Solid titanium abutments

Indexed keywords

GOLD ALLOY; PANAVIA TPN S; PANAVIA TPN-S; PHOSPHATE; RESIN; RESIN CEMENT; UNCLASSIFIED DRUG;

ARTICLE; CEMENTATION; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL CARE; DENTAL SURGERY; DENTURE; ELECTROPLATING INDUSTRY; HUMAN; INSTRUMENTATION; MATERIALS TESTING; METHODOLOGY; NIMETICAP; RANDOMIZED CONTROLLED TRIAL; SURFACE PROPERTY; TEMPERATURE; TOOTH CROWN; TOOTH IMPLANTATION; TOOTH PROSTHESIS;

CEMENTATION; COMPOSITE RESINS; CROWNS; DENTAL ABUTMENTS; DENTAL CASTING TECHNIQUE; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS RETENTION; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTAL RESTORATION FAILURE; DENTAL STRESS ANALYSIS; ELECTROPLATING; GOLD ALLOYS; HUMANS; MATERIALS TESTING; PHOSPHATES; RESIN CEMENTS; SURFACE PROPERTIES; TEMPERATURE;

EID: 33846217365     PISSN: 09057161     EISSN: 16000501     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2006.01299.x     Document Type: Article

References (60)

1. Adell, R., Lekholm, U., Rockler, B. & Branemark, P.I. (1981) A 15-year study of osseointegrated implants in the treatment of the edentulous jaw. International Journal of Oral Surgery 10: 387-416.
2. Andersson, M., Bergman, B., Bessing, C., Ericson, G., Lundquist, P. & Nilson, H. (1989) Clinical results with titanium crowns fabricated with machine duplication and spark erosion. Acta Odontology Scandinavian 47: 279-286.
3. Aparicio, C. (1994) A new method to routinely achieve passive fit of ceramometal prostheses over Branemark osseointegrated implants: a two-year report. International Journal of Periodontics and Restorative Dentistry 14: 404-419.
4. Aparicio, C. (1995) A new method for achieving passive fit of an interim restoration supported by Branemark implants: a technical note. International Journal of Oral & Maxillofacial Implants 10: 614-618.
5. Assif, D., Nissan, J., Varsano, I. & Singer, A. (1999) Accuracy of implant impression splinted techniques: effect of splinting material. International Journal of Oral & Maxillofacial Implants 14: 885-888.
6. Brägger, U. (1999) Quality assurance in dentistry. Schweiz Monatsschr Zahnmed 2: 300-302.
7. Brägger, U., Aeschlimann, S., Burgin, W., Hammerle, C.H. & Lang, N.P. (2001) Biological and technical complications and failures with fixed partial dentures (FPD) on implants and teeth after four to five years of function. Clinical Oral Implants Research 12: 26-34.
8. Carr, A.B., Gerard, D.A. & Larsen, P.E. (1996) The response of bone in primates around unloaded dental implants supporting prostheses with different levels of fit. Journal of Prosthetic Dentistry 76: 500-509.
9. Clelland, N.L., Carr, A.B. & Gilat, A. (1996) Comparison of strains transferred to a bone simulant between as-cast and postsoldered implant frameworks for a five-implant-supported fixed prosthesis. Journal of Prosthodontics 5: 193-200.
10. Clelland, N.L., Papazoglou, E., Carr, A.B. & Gilat, A. (1995) Comparison of strains transferred to a bone simulant among implant overdenture bars with various levels of misfit. Journal of Prosthodontics 4: 243-250.
11. Contreras, E.F., Henriques, G.E., Giolo, S.R. & Nobilo, M.A. (2002) Fit of cast commercially pure titanium and Ti-6Al-4Valloy crowns before and after marginal refinement by electrical discharge machining. Journal of Prosthetic Dentistry 88: 467-472.
12. Hatano, N., Yamaguchi, M., Suwa, T. & Watanabe, K. (2003) A modified method of immediate loading using Branemark implants in edentulous mandibles. Odontology 91: 37-42.
13. Iglesia, M.A. & Moreno, J. (2001) A method aimed at achieving passive fit in implant prostheses: case report. International Journal of Prosthodontics 14: 570-574.
14. Jemt, T. (1991) Failures and complications in 391 consecutively inserted fixed prostheses supported by Branemark implants in edentulous jaws: a study of treatment from the time of prosthesis placement to the first annual checkup. International Journal of Oral & Maxillofacial Implants 6: 270-276.
15. Jemt, T. (1995) Three-dimensional distortion of gold alloy castings and welded titanium frameworks. Measurement of the precision of fit between completed implant prostheses and the master casts in routine edentulous situation. Journal of Oral Rehabilitation 22: 557-564.
16. Jemt, T. (1996) In vivomeasurements of precision of fit involving implant-supported prostheses in the edentulous jaw. International Journal of Oral & Maxillofacial Implants 11: 151-158.
17. Jemt, T., Back, T. & Petersson, A. (1999) Precision of CNC-milled titanium frameworks for implant treatment in the edentulous jaw. International Journal of Prosthodontics 12: 209-215.
18. Jemt, T. & Book, K. (1996) Prosthesis misfit and marginal bone loss in edentulous implant patients. International Journal of Oral & Maxillofacial Implants 11: 620-625.
19. Jemt, T., Henry, P., Linden, B., Naert, I., Weber, H. & Wendelhag, I. (2003) Implant-supported laser-welded titanium and conventional cast frameworks in the partially edentulous law: a 5-year prospective multicenter study. International Journal of Prosthodontics 16: 415-421.
20. Jemt, T. & Lekholm, U. (1998) Measurements of bone and frame-work deformations induced by misfit of implant superstructures. A pilot study in rabbits. Clinical Oral Implants Research 9: 272-280.
21. Jemt, T., Lekholm, U. & Johansson, C.B. (2000) Bone response to implant-supported frameworks with differing degrees of misfit preload: in vivo study in rabbits. Clinical Implant Dental Related Research 2: 129-137.
22. Kallus, T. & Bessing, C. (1994) Loose gold screws frequently occur in full-arch fixed prostheses supported by osseointegrated implants after 5 years. International Journal of Oral & Maxillofacial Implants 9: 169-178.
23. Kan, J.Y., Rungcharassaeng, K., Bohsali, K., Goodacre, C.J. & Lang, B.R. (1999) Clinical methods for evaluating implant framework fit. Journal of Prosthetic Dentistry 81: 7-13.
24. Karl, M., Winter, W., Taylor, T.D. & Heckmann, S.M. (2004) In vitro study on passive fit in implant-supported 5-unit fixed partial dentures. International Journal of Oral & Maxillofacial Implants 19: 30-37.
25. Klineberg, I.J. & Murray, G.M. (1985) Design of superstructures for osseointegrated fixtures. Sweden Dental Journal 28 (Suppl.): 63-69.
26. Kohavi, D. (1993) Complications in the tissue integrated prostheses components: clinical and mechanical evaluation. Journal of Oral Rehabilitation 20: 413-422.
27. Kunavisarut, C., Lang, L.A., Stoner, B.R. & Felton, D.A. (2002) Finite element analysis on dental implant-supported prostheses without passive fit. Journal of Prosthodontics 11: 30-40.
28. Ma, T., Nicholls, J.I. & Rubenstein, J.E. (1997) Tolerance measurements of various implant components. International Journal of Oral & Maxillofacial Implants 12: 371-375.
29. Mansour, A., Ercoli, C., Graser, G., Tallents, R. & Moss, M. (2002) Comparative evaluation of casting retention using the ITI solid abutment with six cements. Clinical Oral Implants Research 13: 343-348.
30. Naconecy, M.M., Teixeira, E.R., Shinkai, R.S., Frasca, L.C. & Cervieri, A. (2004) Evaluation of the accuracy of 3 transfer techniques for implant-supported prostheses with multiple abutments. International Journal of Oral & Maxillofacial Implants 19: 192-198.
31. Ortorp, A. & Jemt, T. (2002) Clinical experience of CNC-milled titanium frameworks supported by implants in the edentulous jaw: a 3-year interim report. Clinical Implant Dental Related Research 4: 104-109.
32. Ortorp, A., Jemt, T., Back, T. & Tord, J. (2003) Comparisons of precision of fit between cast and CNC-milled titaniumimplant frameworks for the edentulous mandible. International Journal of Prosthodontics 16: 194-200.
33. Pietrabissa, R., Gionso, L., Quaglini, V., Di Martino, E. & Simion, M. (2000) An in vitro study on compensation of mismatch of screw vs. cement-retained implant supported fixed prostheses. Clinical Oral Implants Research 11: 448-457.
34. Pjetursson, B.E., Tan, K., Lang, N.P., Brägger, U., Egger, M. & Zwahlen, M. (2004) A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. Clinical Oral Implants Research 15: 667-676.
35. Renner, A.M. (2000) Fabrication of implant over-dentures that are passive and biocompatible. Implant Dentistry 9: 96-101.
36. Riedy, S.J., Lang, B.R. & Lang, B.E. (1997) Fit of implant frameworks fabricated by different techniques. Journal of Prosthetic Dentistry 78: 596-604.
37. Rubeling, G. (1999) New techniques in spark erosion: the solution to an accurately fitting screw-retained implant restoration. Quintessence International 30: 38-48.
38. Sjogren, G., Andersson, M. & Bergman, M. (1988) Laser welding of titanium in dentistry. Acta Odontology Scandinavian 46: 247-253.
39. Smedberg, J.I., Nilner, K., Rangert, B., Svensson, S.A. & Glantz, P.O. (1996) On the influence of superstructure connection on implant preload: a methodological and clinical study. Clinical Oral Implants Research 7: 55-63.
40. Squier, R.S., Agar, J.R., Duncan, J.P. & Taylor, T.D. (2001) Retentiveness of dental cements used with metallic implant components. International Journal of Oral & Maxillofacial Implants 16: 793-798.
41. Sutherland, J.K. & Hallam, R.F. (1990) Soldering technique for osseointegrated implant prostheses. Journal of Prosthetic Dentistry 63: 242-244.
42. Takahashi, T. & Gunne, J. (2003) Fit of implant frameworks: an in vitro comparison between two fabrication techniques. Journal of Prosthetic Dentistry 3: 256-260.
43. Taylor, T.D. (1998) Prosthodontic problems and limitations associated whit osseointegration. Journal of Prosthetic Dentistry 79: 74-78.
44. Taylor, T.D., Agar, J.R. & Vogiatzi, T. (2000) Implant prostodontics: current perspective and future direction. International Journal of Oral & Maxillofacial Implants 15: 66-75.
45. Thoupos, G.A., Zouras, C.S., Winkler, S. & Roussos, V.G. (1995) Connecting implant framework segments. Implant Dentistry 4: 97-99.
46. Vallittu, P.K. (1997) Brazing joints of gold alloy used in porcelain-fused-to-metal restorations and their resistance to deflection fatigue. Journal of Oral Rehabilitation 24: 444-448.
47. Van Roekel, N.B. (1992a) Prosthesis fabrication using electrical discharge machining. International Journal of Oral & Maxillofacial Implants 7: 56-61.
48. Van Roekel, N.B. (1992b) Electrical discharge machining in dentistry. International Journal of Prosthodontics 5: 114-121.
49. Vence, B.S. (1997) Electroforming technology for galvanoceramic restorations. Journal of Prosthetic Dentistry 77: 444-449.
50. Vigolo, P., Majzoub, Z. & Cordioli, G. (2003) Evaluation of the accuracy of three techniques used for multiple implant abutment impressions. Journal of Prosthetic Dentistry 89: 186-192.
51. Watanabe, F., Uno, I., Hata, Y., Neuendorff, G. & Kirsch, A. (2000) Analysis of stress distribution in a screw-retained implant prosthesis. International Journal of Oral & Maxillofacial Implants 15: 209-218.
52. Watanabe, I., Watanabe, E., Atsuta, M. & Okabe, T. (1997) Tensile strength of soldered gold alloy joints. Journal of Prosthetic Dentistry 78: 260-266.
53. Wee, A.G. (2000) Comparison of impressionmaterials for direct multi-implant impressions. Journal of Prosthetic Dentistry 83: 323-331.
54. Wee, A.G., Aquilino, S.A. & Schneider, R.L. (1999) Strategies to achieve fit in implant prosthodontics: a review of the literature. International Journal of Prosthodontics 12: 167-178.
55. Wee, A.G., Cheng, A.C. & Eskridge, R.N. (2002) Accuracy of 3 conceptually different die systems used for implant casts. Journal of Prosthetic Dentistry 87: 23-29.
56. Wee, A.G., Schneider, R.L., Aquilino, S.A., Huff, T.L., Lindquist, T.J. & Williamson, D.L. (1998) Evaluation of the accuracy of solid implant casts. Journal of Prosthodontics 7: 161-169.
57. Weigl, P. (2000) Ceramic primary crowns with directly electroformed matrices - an innovative retention element with new properties. In: Wirz, J. & Hoffman, A., eds. Electroforming in Restorative Dentistry, 268-319. Carol Stream, IL: Quintessenze Publishing.
58. Wise, M. (2001) Fit of implant-supported fixed prostheses fabricated on master cast made from a dental stone and a dental plaster. Journal of Prosthetic Dentistry 86: 532-538.
59. Yoko, Y., Hidekazu, T., Makoto, S. & Naohiko, I. (2003) Fit of electroformed porcelain-fused-to-metal crown on implant abutment. Kokubyo Gakkai Zasshi 70: 175-181.
60. Zervas, P.J., Papazoglou, E., Beck, F.M. & Carr, A.B. (1999) Distortion of three-unit implant frameworks during casting, soldering, and simulated porcelain firings. Journal of Prosthodontics 3: 171-179.