Framework for optimal design of porous scaffold microstructure by computational simulation of bone regeneration

Biomaterials

Volumn 27, Issue 21, 2006, Pages 3964-3972

  Adachi, Taiji ^a   Osako, Yuki ^a   Tanaka, Mototsugu ^a   Hojo, Masaki ^a   Hollister, Scott J ^b  

^a KYOTO UNIVERSITY   (Japan)

^b UNIVERSITY OF MICHIGAN   (United States)

Author keywords

Bone tissue engineering; Computational biomechanics; Optimal design; Porous scaffold

Indexed keywords

BIOMATERIALS; BIOMECHANICS; BONE; COMPUTER SIMULATION; MICROSTRUCTURE; TISSUE CULTURE;

BONE TISSUE ENGINEERING; COMPUTATIONAL BIOMECHANICS; OPTIMAL DESIGN; POROUS SCAFFOLD;

POROUS MATERIALS;

POLYMER;

ARTICLE; BONE REGENERATION; BONE TISSUE; DIFFUSION; ENERGY; HYDROLYSIS; MECHANICAL STIMULATION; OSSIFICATION; PRIORITY JOURNAL; SIMULATION; WATER CONTENT;

ANIMALS; BIOMECHANICS; BONE AND BONES; BONE REGENERATION; BONE SUBSTITUTES; COMPUTER SIMULATION; EQUIPMENT DESIGN; EQUIPMENT FAILURE ANALYSIS; GUIDED TISSUE REGENERATION; HUMANS; MATERIALS TESTING; MODELS, BIOLOGICAL; POROSITY;

EID: 33646017698     PISSN: 01429612     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.biomaterials.2006.02.039     Document Type: Article

References (55)

1. Zhang R., and Ma P.X. Poly(alpha-hydroxyl acids)/hydroxyapatite porous composites for bone-tissue engineering. I. Preparation and morphology. J Biomed Mater Res 44 (1999) 446-455
2. Petite H., Viateau V., Bensaid W., Meunier A., de Pollak C., Bourguignon M., et al. Tissue-engineered bone regeneration. Nat Biotechnol 18 (2000) 959-963
3. Hutmacher D.W. Scaffolds in tissue engineering bone and cartilage. Biomaterials 21 (2000) 2529-2543
4. Langer R., and Vacanti J.P. Tissue engineering. Science 260 (1993) 920-926
5. Butler D.L., Goldstein S.A., and Guilak F. Functional tissue engineering: the role of biomechanics. J Biomech Eng 122 (2000) 570-575
6. Hollister S. Porous scaffold design for tissue engineering. Nat Mater 4 (2005) 518-524
7. Ishaug-Riley S.L., Crane-Kruger G.M., Yaszemski M.J., and Mikos A.G. Three-dimensional culture of rat calvarial osteoblasts in porous biodegradable polymers. Biomaterials 19 (1998) 1405-1412
8. Cima L.G., Vacanti J.P., Vacanti C., Ingber D., Mooney D., and Langer R. Tissue engineering by cell transplantation using degradable polymer substrates. J Biomech Eng 113 (1991) 143-151
9. Gauthier O., Bouler J.M., Aguado E., Pilet P., and Daculsi G. Macroporous biphasic calcium phosphate ceramics: influence of macropore diameter and macroporosity percentage on bone ingrowth. Biomaterials 19 (1998) 133-139
10. Lin A.S., Barrows T.H., Cartmell S.H., and Guldberg R.E. Microarchitectural and mechanical characterization of oriented porous polymer scaffolds. Biomaterials 24 (2003) 481-489
11. Hutmacher D.W. Scaffold design and fabrication technologies for engineering tissues-state of the art and future perspectives. J Biomater Sci Polym Ed 12 (2001) 107-124
12. Chu T., Orton D., Hollister S., Feinberg S., and Halloran J. Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. Biomaterials 23 (2002) 1283-1293
13. Yang S., Leong K.F., Du Z., and Chua C.K. The design of scaffolds for use in tissue engineering. Part II. Rapid prototyping techniques. Tissue Eng 8 (2002) 1-11
14. Zein I., Hutmacher D.W., Tan K.C., and Teoh S.H. Fused deposition modeling of novel scaffold architectures for tissue engineering applications. Biomaterials 23 (2002) 1169-1185
15. Williams J., Adewunmi A., Schek R., Flanagan C., Krebsbach P., Feinberg S., et al. Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. Biomaterials 26 (2005) 4817-4827
16. Giordano R., Wu B., Borland S., Cima L., Sachs E., and Cima M. Mechanical properties of dense polylactic acid structures fabricated by three dimensional printing. J Biomater Sci Polym Ed 8 (1996) 63-75
17. Mironov V., Boland T., Trusk T., Forgacs G., and Markwald R.R. Organ printing: computer-aided jet-based 3D tissue engineering. Trends Biotechnol 21 (2003) 157-161
18. Seitz H., Rieder W., Irsen S., Leukers B., and Tille C. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. J Biomed Mater Res B Appl Biomater 74B (2005) 782-788
19. Lee M., Dunn J., and Wu B. Scaffold fabrication by indirect three-dimensional printing. Biomaterials 26 (2005) 4281-4289
20. Taboas J.M., Maddox R.D., Krebsbach P.H., and Hollister S.J. Indirect solid free form fabrication of local and global porous, biomimetic and composite 3D polymer-ceramic scaffolds. Biomaterials 24 (2003) 181-194
21. Hollister S.J., Levy R.A., Chu T.M., Halloran J.W., and Feinberg S.E. An image-based approach for designing and manufacturing craniofacial scaffolds. Int J Oral Maxillofac Surg 29 (2000) 67-71
22. Hutmacher D.W., Sittinger M., and Risbud M.V. Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems. Trends Biotechnol 22 (2004) 354-362
23. Rose F.R., and Oreffo R.O. Bone tissue engineering: hope vs hype. Biochem Biophys Res Commun 292 (2002) 1-7
24. Hollister S.J., Maddox R.D., and Taboas J.M. Optimal design and fabrication of scaffolds to mimic tissue properties and satisfy biological constraints. Biomaterials 23 (2002) 4095-4103
25. Lin C.Y., Kikuchi N., and Hollister S.J. A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity. J Biomech 37 (2004) 623-636
26. Lin C., Kikuchi N., and Hollister S. A novel method for biomaterial scaffold internal architecture design to match bone elastic properties with desired porosity. J Biomech 37 (2004) 623-636
27. Porter B., Zauel R., Stockman H., Guldberg R., and Fyhrie D. 3-D computational modeling of media flow through scaffolds in a perfusion bioreactor. J Biomech 38 (2005) 543-549
28. Parfitt A.M. Osteonal and hemi-osteonal remodeling: the spatial and temporal framework for signal traffic in adult human bone. J Cell Biochem 55 (1994) 273-286
29. Duncan R.L., and Turner C.H. Mechanotransduction and the functional response of bone to mechanical strain. Calcif Tissue Int 57 (1995) 344-358
30. Adachi T., Kawano Y., and Tomita Y. Computational prediction of change in stiffness of bone-scaffold structure in regeneration process. In: Kamm R.D., Schmid-Schonbein G.W., Ateshian G.A., and Hefzy M.S. (Eds). 2001 ASME bioengineering conference (2001), ASME, Snowbird, Utah 545-546
31. Adachi T, Kawano Y, Tomita Y, Hollister S. Design method of porous scaffold microstructure using computational simulation for bone regeneration. In: Proceedings of the fourth world congress of biomechanics, Calgary, Canada, 2002.
32. Adachi T., Tomita Y., Sakaue H., and Tanaka M. Simulation of trabecular surface remodeling based on local stress nonuniformity. JSME Int Ser C 40 (1997) 782-792
33. Adachi T., Tsubota K., Tomita Y., and Hollister S.J. Trabecular surface remodeling simulation for cancellous bone using microstructural voxel finite element models. J Biomech Eng 123 (2001) 403-409
34. Tsubota K., Adachi T., and Tomita Y. Functional adaptation of cancellous bone in human proximal femur predicted by trabecular surface remodeling simulation toward uniform stress state. J Biomech 35 (2002) 1541-1551
35. Tsubota K., Adachi T., and Tomita Y. Effects of a fixation screw on trabecular structural changes in a vertebral body predicted by remodeling simulation. Ann Biomed Eng 31 (2003) 733-740
36. Tsubota K., and Adachi T. Changes in the fabric and compliance tensors of cancellous bone due to trabecular surface remodeling, predicted by a digital image-based model. Comput Methods Biomech Biomed Eng 7 (2004) 187-192
37. Tsubota K., and Adachi T. Spatial and temporal regulation of cancellous bone structure: characterization of a rate equation of trabecular surface remodeling. Med Eng Phys 27 (2005) 305-311
38. Adachi T., Tanaka M., and Tomita Y. Uniform stress state in bone structure with residual stress. J Biomech Eng 120 (1998) 342-347
39. Hollister S.J., Brennan J.M., and Kikuchi N. A homogenization sampling procedure for calculating trabecular bone effective stiffness and tissue level stress. J Biomech 27 (1994) 433-444
40. Guldberg R.E., Hollister S.J., and Charras G.T. The accuracy of digital image-based finite element models. J Biomech Eng 120 (1998) 289-295
41. Adachi T, Tomita Y. Computational prediction of change in mechanical function of bone-porous scaffold structure in tissue regeneration process. In: Proceedings of the 14th U. S. national congress of theoretical and applied mehcanics, Blacksburg, Virginia, US, 2002. p. 338-9.
42. Kim B.S., and Mooney D.J. Development of biocompatible synthetic extracellular matrices for tissue engineering. Trends Biotechnol 16 (1998) 224-230
43. Shea L.D., Smiley E., Bonadio J., and Mooney D.J. DNA delivery from polymer matrices for tissue engineering. Nat Biotechnol 17 (1999) 551-554
44. Kikuchi M., Suetsugu Y., Tanaka J., and Akao M. Preparation and mechanical properties of calcium phosphate/copoly-l-lactide composites. J Mater Sci Mater Med 8 (1997) 361-364
45. Ignjatovic N., Tomic S., Dakic M., Miljkovic M., Plavsic M., and Uskokovic D. Synthesis and properties of hydroxyapatite/poly-l-lactide composite biomaterials. Biomaterials 20 (1999) 809-816
46. Shikinami Y., Matsusue Y., and Nakamura T. The complete process of bioresorption and bone replacement using devices made of forged composites of raw hydroxyapatite particles/poly l-lactide (F-u-HA/PLLA). Biomaterials 26 (2005) 5542-5551
47. Gopferich A. Polymer bulk erosion. Macromolecules 30 (1997) 2598-2604
48. Cowin S.C. Bone stress adaptation models. J Biomech Eng 115 (1993) 528-533
49. Carter D.R. Mechanical loading histories and cortical bone remodeling. Calcif Tissue Int 36 Suppl 1 (1984) S19-S24
50. Huiskes R., Weinans H., Grootenboer H.J., Dalstra M., Fudala B., and Slooff T.J. Adaptive bone-remodeling theory applied to prosthetic-design analysis. J Biomech 20 (1987) 1135-1150
51. Hollister S., and Kikuchi N. Homogenization theory and digital imaging-a basis for studying the mechanics and design principles of bone tissue. Biotechnol Bioeng 43 (1994) 586-596
52. Van Rietbergen B., Weinans H., Huiskes R., and Odgaard A. A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models. J Biomech 28 (1995) 69-81
53. Hughes T., Feremcz R., and Hallquist J. Large-scale vectorized implicit calculations in solid mechanics on a Cray X-MP/48 utilizing EBE preconditioned conjugate gradients. Comput Methods Appl Mech Eng 61 (1987) 215-248
54. Goldstein S.A., Matthews L.S., Kuhn J.L., and Hollister S.J. Trabecular bone remodeling-an experimental-model. J Biomech 24-S1 (1991) 135-150
55. Guldberg R.E., Caldwell N.J., Guo X.E., Goulet R.W., Hollister S.J., and Goldstein S.A. Mechanical stimulation of tissue repair in the hydraulic bone chamber. J Bone Miner Res 12 (1997) 1295-1302