Percussion drilling of polyimide using VUV and UV solid state lasers

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 5827, Issue , 2005, Pages 475-485

  Mullan, C ^a   Ilie, D ^a   Favre, S ^a   O'Connor, G M ^a   Glynn, T J ^a  

^a NATIONAL UNIVERSITY OF IRELAND   (Ireland)

Author keywords

Incubation; Percussion drilling; Polyimide; Repetition rate; Solid state laser

Indexed keywords

INCUBATION; PERCUSSION DRILLING; REPETITION RATES;

DRILLING; LASER ABLATION; POLYIMIDES; PROFILOMETRY; Q SWITCHED LASERS; SCANNING ELECTRON MICROSCOPY; SOLID STATE LASERS;

PERCUSSION WELDING;

EID: 27744436052     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.605151     Document Type: Conference Paper

References (23)

1. S. Raimondi, S. Abolhassani, R. Brutsch et al., "Quantification of polyimide carbonization after laser ablation," J Appl Phys 88 (6), 3659-3666 (2000);
2. E. E. Ortelli, F. Geiger, T. Lippert et al, "UV-laser-induced decomposition of Kapton studied by infrared spectroscopy," Macromolecules 33 (14), 5090-5097 (2000);
3. R. Srinivasan, R. R. Hall, W. D. Loehle et al., "Chemical- Transformations of the Polyimide Kapton Brought About by Ultraviolet-Laser Radiation," J Appl Phys 78 (8), 4881-4887 (1995).
4. K. P. Adhi, R. L. Owings, T. A. Railkar et al., "Chemical modifications in femtosecond ultraviolet (248 nm) excimer laser radiation-processed polyimide," Appl Surf Sci 225 (1-4), 324-331 (2004).
5. K. C. Yung, D. W. Zeng, and T. M. Yue, "XPS investigation of Upilex-S polyimide ablated by 355 nm Nd: YAG laser irradiation," Appl Surf Sci 173 (3-4), 193-202 (2001).
6. X. M. Lu, Q. H. Lu, Z. K. Zhu et al., "Laser-induced periodic surface structure on polyimide doped with lecithin," Materials Letters 57 (22-23), 3636-3640 (2003).
7. T. Lippert, E. Ortelli, J. C. Panitz et al., "Imaging-XPS/Raman investigation on the carbonization of polyimide after irradiation at 308 nm," Appl Phys a-Mater 69, S651-S654 (1999).
8. K. Piglmayer, E. Arenholz, C. Ortwein et al., "Single-pulse ultraviolet laser-induced surface modification and ablation of polyimide," Appl Phys Lett 73 (6), 847-849 (1998).
9. Zhongli Li, Soh Zeom Yow, Lena Lui et al., "Effects of laser parameters on plume characteristics and ablation rate," Proc. SPIE 4637, 43-53 (2002).
10. K. C. Yung, D. W. Zeng, and T. M. Yue, "High repetition rate effect on the chemical characteristics and composition of Upilex-S polyimide ablated by a UVNd: YAG laser," Surf Coat Tech 160 (1), 1-6 (2002).
11. D. W. Zeng, K. C. Yung, and C. S. Xie, "XPS investigation of the chemical characteristics of Kapton films ablated by a pulsed TEA CO2 laser," Surf Coat Tech 153 (2-3), 210-216 (2002).
12. Q. H. Lu, Z. G. Wang, J. Yin et al., "Molecular orientation in laser-induced periodic microstructure on polyimide surface," Appl Phys Lett 76 (10), 1237-1239 (2000).
13. W. S. Chang, B. S. Shin, J. Kim et al., "Photothermal three-dimensional fabrication of polymers using diode-pumped solid state lasers," J Microlith Microfab 3 (3), 472-477 (2004).
14. H. Howard, A. J. Conneely, G. M. O'Connor et al., "Investigation of a method for the determination of the focused spot size of industrial laser beams based on the drilling of holes in mylar film," OptoIreland 2002: Optics and Photonics Technologies and Applications, Werner J. Blau et al eds., Proc. SPIE 4876, 541-552 (2003).
15. K. Koechner, Solid-State Laser Engineering, 5th edition ed. (Springer-Verlag, Berlin Heidelberg, 1999).
16. J. Kruger, H. Niino, and A. Yabe, "Investigation of excimer laser ablation threshold of polymers using a microphone," Appl Surf Sci 197, 800-804 (2002).
17. R. Srinivasan, K. G. Casey, B. Braren et al., "The Significance of a Fluence Threshold for Ultraviolet-Laser Ablation and Etching of Polymers," J Appl Phys 67 (3), 1604-1606 (1990).
18. M. Himmelbauer, E. Arenholz, D. Bauerle et al., "UV-laser-induced surface topology changes in polyimide," Appl Phys a-Mater 63 (4), 337-339 (1996).
19. K. C. Yung and D. W. Zeng, "Laser ablation of Upilex-S polyimide: influence of laser wavelength on chemical structure and composition in both ablated area and halo," Surface and Coatings Technology 145 (1-3), 186-193 (2001).
20. T. Dumont, S. Lazare, T. Lippert et al., "Changes in the etch rate of photosensitive polymers as a function of the pulse number," Appl Phys a-Mater 79 (4-6), 1271-1274 (2004).
21. F. C. Burns and S. R. Cain, "The effect of pulse repetition rate on laser ablation of polyimide and polymethylmethacrylate-based polymers," J Phys D Appl Phys 29 (5), 1349-1355 (1996).
22. G. M. O'Connor, H. Howard, A. J. Conneely et al., "Analysis of debris generated during UV laser micromachining of silicon," Photon Processing In Microelectronics and Photonics III, P. R. Herman et al eds., Proc. SPIE 5339, 241-249 (2004).
23. Z. Y. Wang, J. T. Liu, D. M. Hirak et al., "Determining the spot size and Gaussian distribution coefficient of pulsed laser beams using Kapton films," Journal of Laser Applications 5, 5-12 (1993).