The quantification of physiologically relevant cross-shear wear phenomena on orthopaedic bearing materials using the MAX-Shear wear testing system

Journal of Tribology

Volumn 127, Issue 4, 2005, Pages 740-749

  Gevaert, Matthew R ^a   LaBerge, Martine ^a   Gordon, Jennifer M ^a   DesJardins, John D ^a  

^a AMRL   (United States)

Author keywords

Cross shear; Multi directional; TKR; Tribology; UHMWPE; Wear

Indexed keywords

BIOMATERIALS; FAILURE (MECHANICAL); ORTHOPEDICS; SCANNING ELECTRON MICROSCOPY; SHEAR STRESS; STAINLESS STEEL; SURFACE ROUGHNESS; TRIBOLOGY; ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES;

CROSS-SHEAR WEAR; WEAR DAMAGE; WEAR TESTING;

WEAR OF MATERIALS;

TRIBOLOGY;

EID: 27544494311     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2000272     Document Type: Article

References (32)

1. McGloughlin T. M., and Kavanagh, A. G., 2000, "Wear of Ultra-High Molecular Weight Polyethylene (UHMWPE) in Total Knee Prostheses: A Review of Key Influences," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 214 (H4), pp. 349-359.
2. Bradgon, C. R., O'Connor, D. O., Lowenstein, J. D., Jasty, M., and Syniuta, W. D., 1996, "The Importance of Multidirectional Motion on the Wear of Polyethylene," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 210 (H3), pp. 157-165.
3. Blunn, G. W., Walker, P. S., Joshi, A., and Hardinge, K., 1991, "The Dominance of Cyclic Sliding in Producing Wear in Total Knee Replacements," Clin. Orthop. Relat. Res., 273, pp. 253-260.
4. Wang, A., Stark, C., and Dumbleton, J. H., 1996, "Mechanistic and Morphological Origins of Ultra-High Molecular Weight Polyethylene Wear Debris in Total Joint Replacement Prostheses," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 210 (H3), pp. 141-155.
5. Johnson, T., Andriacchi, T., Laurent, M., Yao, J., and Mclean, C., 2001, "An in Vivo Based Knee Wear Test Protocol Incorporating a Heel Strike Slip Velocity Transient," Trans. Annu. Meet. M Orthop. Res. Soc., 26, p. 1006.
6. DesJardins, J., Caroll, M., and LaBerge, M., 2002, "Tracking TKR Design Dynamic Pivot Locations During Force-Controlled TKR Wear Simulation," Trans. Soc. Biomater., 25, p. 718.
7. DesJardins, J., Banks, S., and LaBerge, M., 2002, "Validation of TKR Wear Testing Contact Sliding Velocities Using in Vivo TKR Fluoroscopy," Trans. Annu. Meet. M Orthop. Res. Soc., 27, p. 0959.
8. DesJardins, J., Banks, S., and LaBerge, M., 2001, "A Direct Comparison of Patient and Simulator Total Knee Replacement Kinematics," Trans. Annu. Meet. M Orthop. Res. Soc., 26, 1096.
9. Sawyer, W. G., Hamilton, M. A., Sucec, M. C., Fregly, B. J., and Banks, S. A., 2003, "Analysis of in Vivo Crossing Motion in Total Knee Replacements," Summer Bioengineering Conference, Key Biscayne, FL, 0549, http://www.tulane.edu/~sbc2003/pdfdocs/0549.PDF
10. DesJardins, J., and LaBerge, M., 2002, "Force-Controlled TKR Wear Simulation Produces Complex Cross-Shear Kinematics," Trans. Soc. Biomater., 25, 711.
11. Johnson, K. L., 1987, Contact Mechanics, Cambridge University Press, Cambridge, UK.
12. Szivek, J. A., Anderson, P. L., and Benjamin, J. B., 1996, "Average and Peak Contact Stress Distribution Evaluation of Total Knee Arthroplasties," J. Arthroplasty, 11(8), pp. 952-963.
13. Bartel, D. L., Bicknell, V. L., and Wright, T. M., 1986, "The Effect of Conformity, Thickness, and Material on Stresses in Ultrahigh Molecular-Weight Components for Total Joint Replacement," J. Bone Jt. Surg., Am. Vol. Vol., 68(7), pp. 1041-1051.
14. Calonius, O., and Saikko V., 2002, "Slide Track Analysis of Eight Contemporary Hip Simulator Designs," J. Biomech., 35, pp. 1439-1450.
15. Fischer, D. A., Sambasivan, S., Shen, M. C., and Hsu, S. M., 1999, "Wear Induced Molecular Orientation in UHMWPE Measured by Soft X-ray Absorption," Trans. Soc. Biomater., 22, p. 194.
16. Saikko, V., 1997, "A Multi-Directional Motion Pin-On-Disk Test Method for Prosthetic Joint Materials," J. Biomed. Mater. Res., 41, pp. 58-64.
17. Bradgon, C. R., O'Connor, D. O., Lowenstein, J. D., Jasty, M., Biggs, S. A., and Harris, W. H., 2001, "A New Pin-On-Disk Wear Testing Method for Simulating Wear of Polyethylene on Cobalt-Chrome Alloy in Total Hip Arthoplasty," J. Arthroplasty, 16(5), pp. 658-665.
18. Wang, A., 2000, "A Unified Theory of Wear for Ultra-High Molecular Weight Polyethylene in Multi-Directional Sliding," Wear, 248, pp. 38-47.
19. Joyce, T. J., Vandelli, C., Cartwright, T., and Unsworth, A., 2001, "A Comparison of the Wear of Cross-Linked Polyethylene Against Itself Under Reciprocating and Multi-Directional Motion with Different Lubricants," Wear, 250, pp. 206-211.
20. Turell, M., Wang, A. G., and Bellare, A., 2003, "Quantification of the Effect of Cross-Path Motion on the Wear Rate of Ultra-High Molecular Weight Polyethylene," Wear, 255(2), pp. 1034-1039.
21. Toohey, K. S., Blanchet, T. A., and Heckelman, D. D., 2003, "Effect of Accelerated Aging Conditions on Resultant Depth-Dependent Oxidation and Wear Resistance of UHMWPE Joint Replacement Bearing Materials," Wear, 255, pp. 1076-1084.
22. Sambasivan, S., Fischer, D. A., Chen, M. C., and Hsu, S. M., 2004, "Molecular Orientation of Ultrahigh Molecular Weight Polyethylene Induced by Various Sling Motions," J. Biomed. Mater. Res., Part B: Appl. Biomater., 70(B), pp. 278-285.
23. Yao, J. Q., Blanchet, T. A,, Murphy, D. J., and Laurent, M. P., 2003, "Effect of Fluid Absorption on the Wear Resistance of UHMWPE Orthopedic Bearing Surfaces," Wear, 255, pp, 1113-1120.
24. Saikko, V., and Calonius, O., 2002, "Slide Track Analysis of the Relative Motion between Femoral Head and Acetabular Cup in Walking and in Hip Simulators," J. Biomech., 35, pp. 455-464.
25. Fregly, B. J., Sawyer, W. G., Harman, M. K., and Banks, S. A., 2004, "Computational Wear Prediction of Total Knee Replacement from in Vivo Kinematics," J. Biomech., 38(2), pp. 305-314.
26. DesJardins, J. D., Benson, L. C., Gustafson, L. M., and LaBerge, M., 2005, "Fiberscopic Visualization of Total Knee Replacement Contact Kinematics During In Vitro Simulation," Trans. World Tribology Congress 3, 63699.
27. Benson, L. C., DesJardins, J. D., Harman, M. K., and LaBerge, M., 2002, "Effect of Stair Descent Loading on Ultra-High Molecular Weight Polyethylene Wear in a Force-controlled Knee Simulator," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 216(6), pp. 409-418.
28. Wang, A., Sun, D., Yau, S.-S., Edwards, B., Sokol, M., Essner, A., Polineni, V., Stark, C., and Dumbleton, J. H., 1997, "Orientation Softening in the Deformation and Wear of Ultra-High Polyethylene," Wear, 203, pp. 230-241.
29. Ramamurthi, B., Bragdon, C., O'Connor, D., Lowenstein, J., Jasty, M., Estok, D., and Harris, W., 1996, "Loci of Movement of Selected Points on the Femoral Head During Normal Gait," J. Arthroplasty, 11(7) pp. 852-855.
30. Wang, A., Essner, A., Stark, C., and Dumbleton, J. H., 1999, "A Biaxial Line-Contact Wear Machine for the Evaluation of Bearing Materials for Total Knee Joint Replacement," Wear, 229, pp. 701-707.
31. Johnson, T. S., Laurent, M. P., Yao, J. Q., and Gilbertson, L. N., 2001, "The Effect of Displacement Control Input Parameters on Tibiofemoral Prosthetic Knee Wear," Wear, 250, pp. 222-226.
32. Sawyer, W. G., Hamilton, M. A., Sucec, M. C., Fregly, B. J., and Banks, S. A., 2003, "Mapping Multidirectional Sliding Motions on the Tibial Component of Total Knee Replacements Using Patient Specific Kinematics," Proceedings of the ASMES/STLE International Joint Tribology Conference, Ponte Vedra Beach, FL.