Orientation softening in the deformation and wear of ultra-high molecular weight polyethylene

Wear

Volumn 203-204, Issue , 1997, Pages 230-241

  Wang, A ^a   Sun, D C ^a   Yau, S S ^a   Edwards, B ^a   Sokol, M ^a,b   Essner, A ^a   Polineni, V K ^a   Stark, C ^a   Dumbleton, J H ^a  

^a PFIZER INC   (United States)

^b Research Devices Inc Piscataway   (United States)

Author keywords

Cross linking; Multiaxial motion; Orientation softening; Strain softening; UHMWPE

Indexed keywords

ANISOTROPY; CROSSLINKING; CRYSTAL ORIENTATION; DEFORMATION; FAILURE ANALYSIS; MOLECULAR STRUCTURE; PLASMA ETCHING; PLASTIC DEFORMATION; SCANNING ELECTRON MICROSCOPY; STRAIN; TENSILE TESTING; WEAR RESISTANCE;

ORIENTATION SOFTENING; STRAIN SOFTENING;

ULTRAHIGH MOLECULAR WEIGHT POLYETHYLENES;

PLASMA TREATMENT; POLYETHYLENE; WEAR;

EID: 0006544376     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0043-1648(96)07362-0     Document Type: Article

References (44)

1. J. Charnley, Low Friction Arthroplasty of the Hip, Springer, New York, 1979.
2. R.W. Hood, T.M. Wright and A.H. Burstein, Retrieval analysis of total knee prostheses: a method and its application to 48 total condylar prostheses, J. Biomed. Mater. Res., 17 (1983) 829-842.
3. W.H. Harris, The problem is osteolysis, Clin. Orthopaed. Related Res., 311 (1995) 46-53.
4. A.S. Shanbhag, J.J. Jacobs, J. Black, J.O. Glante and T.T. Glant, Macrophage/particle interactions: effect of size, composition and surface area, J. Biomed. Mater. Res., 28 (1994) 81-90.
5. I.C. Clarke, Wear of artificial joint materials, hip joint simulator studies, Engng Med., 10 (1981) 189-198.
6. H.A. McKellop, P. Campbell, S.-H. Park et al., The origin of submicron polyethylene wear debris in total hip arthroplasty, Clin. Orthopaed. Related Res., 311 (1995) 3-20.
7. A. Essner, A. Wang, C. Stark and J.H. Dumbleton, A simulator for the evaluation of total knee replacement component wear, 5th World Biomaterials Congress, May 28-June 2, 1996, Toronto, Canada, pp. 1-580.
8. D.O. O'Connor, C.R. Bragdon, D.W. Burke, M. Jasty, J. Lowenstein and W.H. Harris, A 12 station, upright hip simulator wear testing machine employing oscillating motion replicating the human gait cycle, Trans. 21st Annual Meeting of The Society for Biomaterials, The Society for Biomaterials, Minneapolis, MN, 1995, p. 359.
9. A. Wang, V.K. Polineni, A. Essner et al., The significance of non-linear motion in the wear screening of orthopaedic implant materials, J. Test. Evaluation (in press).
10. A. Wang, C. Stark and J.H. Dumbleton, Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prostheses, Proc. Inst. Mech. Engrs., Part H: J. Eng. Med., 210 (H3) ( 1996) 141-155.
11. H.A. McKellop, Comparison between laboratory wear tests and clinical performance of past bearing materials, ASTM Workshop on Characterization and Performance of Articular Surfaces, ASTM, Denver, CO, 17 May 1995.
12. C.R. Bragdon, M. Jasty, J.D. Lowenstein, J. Elder and K.R. Lee, Mechanism of wear of retrieved polyethylene acetabular components, 63rd Annual Meeting, American Academy of Orthopaedic Surgeons, 22-26 February, 1996, Atlanta, GA, Paper no. 376.
13. M.J. Griffith, M.K. Seidenstein, D. Williams and J. Charnley, Socket wear in Charnley low friction arthroplasty of the hip, Clin. Orthopaed. Related Res., 137 (1978) 37-47.
14. A. Wang, D.C. Sun, C. Stark and J.H. Dumbleton, Wear testing based on unidirectional motion: fact or artifact? 5th World Biomaterials Congress, 28 May-2 June, 1996, Toronto, Canada, pp. I-583.
15. A. Wang, M. Sokol, C. Stark and J.H. Dumbleton, Distribution of frictional stresses on the articular surfaces of human hip joint and its effect on wear of UHMWPE acetabular cups, 5th World Biomaterials Congress, 28 May-2 June, 1996, Toronto, Canada, pp. I-874.
16. A. Wang, C. Stark and J.H. Dumbleton, Role of cyclic plastic deformation in the wear of UHMWPE acetabular cups, J. Biomed. Mater. Res., 29 (1995) 619-626.
17. H.J. Nusbaum, R.M. Rose, I. Paul, A.M. Crognola and E.L. Radin, Wear mechanisms for ultrahigh molecular weight polyethylene in the total hip prostheses, J. Appl. Poly. Sci., 23 (1979) 777-789.
18. J.R. Cooper, D. Dowson and J. Fisher, The mechanisms of the generation of wear particles of ultra-high molecular weight polyethylene, Proc. Leeds-Lyon Tribology Conf., 1992, Elsevier, Amsterdam, pp. 29-39.
19. H.A. McKellop, T. Schmalzried, S.-H. Park and P. Campbell, Evidence for the generation of sub-micron polyethylene wear particles by micro-adhesive wear, Trans. 19th Annual Meeting of The Society for Biomaterials, The Society for Biomaterials, Minneapolis, MN, 1993, p. 184.
20. C.M. Pooley and D. Tabor, Friction and molecular structure: the behavior of some thermoplastics, Proc. R. Soc. Lond. A., 329 (1972) 251-274.
21. B.J. Briscoe and T.A. Stolaski, The influence of linear and rotating motions on the friction of polymers, J. Lubri. Technol., 103 (1981) 503-508.
22. A. Wang, D.C. Sun, C. Stark and J.H. Dumbleton, Effects of sterilization methods on the wear of ultra-high molecular weight polyethylene acetabular cups, 5th World Biomaterials Congress, 28 May-2 June, 1996, Toronto, Canada, pp. II-198.
23. A. Wang, V.K. Polineni, C. Stark and J.H. Dumbleton, Effect of femoral head surface roughening on the wear of non-irradiated and gamma irradiated ultra-high molecular weight polyethylene acetabular cups, Trans. of the 42nd Annual Meeting of the Orthopaedic Research Society, 18-22 February, 1996, Atlanta, GA, Orthopaedic Research Society, Palatine, IL, 1996, p. 473.
24. D.W. Schroeder and K.M. Pozorski, Hip simulator testing of isostatically molded UHMWPE: Effect of EtO and gamma irradiation, Trans. of the 42nd Annual Meeting of the Orthopaedic Research Society, 18-22 February, 1996, Atlanta, GA, The Orthopaedic Research Society, Palatine, IL, 1996, p. 478.
25. H. Oonishi, Y. Takayama and E. Tsuji, Improvement of polyethylene by Irradiation in artificial joints, Radiat. Phys. Chem., 39 (6) (1992) 495-504.
26. B.M. Wroblewski, P.D. Siney, D. Dowson and S.N. Collins, A prospective clinical and joint simulator study of the performance of 22 mm alumina ceramic heads and polyethylene acetabular cups in total hip arthroplasty, JBJS, 78-B (2) (1996) 280-285.
27. I.A. Kapandji, The Physiology of the Joints, Vol. 2, Churchill Livingstone, New York, 1970.
28. G. Bergmann, F. Graichen and A. Rohlmann, Hip joint loading during walking and running, measured in two patients, J. Biomech., 26 (8) (1993) 969-990.
29. H.K. Ramakrishnan and M.P. Kadaba, On the estimation of joint kinematics during gait, J. Biomech., 24 (10) (1991) 969-977.
30. J.P. Paul, Forces transmitted by joints in the human body, Proc. Inst. Mech. Engr, 181 (1966) 8-15.
31. B.S. Ramamurti, C.R. Bragdon and W.H. Harris, Loci of selected points on the femoral head during normal gait, Trans. of the 21st Ann. Meet. of The Society for Biomaterials, The Society for Biomaterials, Minneapolis, MN, 1995, p. 347.
32. D.C. Sun and C. Stark, Non-oxidizing polymeric medical implants, US Patent 5414049.
33. D.C. Sun, A. Wang, C. Stark and J.H. Dumbleton, Development of stabilized UHMWPE implants with improved oxidation resistance via crosslinking, Scientific Exhibit, 63rd Ann. Meeting of the American Academy of Orthopaedics Surgeons, 22-26 February, 1996, Atlanta, GA.
34. M. Ries, R. Rose, J. Greer, K. Weaver, W. Sauer and N. Beals, Sterilization induced effects on UHMWPE performance properties, Trans. of the 41st Ann. Meet. of the Orthopaedic Research Society, 13-16 February, 1995, Orlando, FL, Orthopaedic Research Society, Palatine, IL, 1996, p. 757.
35. P. Campbell, S. Ma, B. Yeom, H. McKellop, T.P. Schmalzried and H.C. Amstutz, Isolation of predominantly submicron sized UHMWPE particles from periprosthetic tissues, J. Biomed. Mater. Res, 29 (1995) 127-131.
36. A. Wang, A. Essner, C. Stark and J.H. Dumbleton, Comparison of the size and morphology of UHMWPE wear debris generated from a hip joint simulator under serum and water lubricated conditions, Biomaterials, 17 (1996) 865-871.
37. M. Kojima and H. Satake, Etched surface morphology of crystalline polymers, J. Poly. Sci.: Poly. Phys. Edn, 20 (1982) 2153-2158.
38. P.C. Powell, Engineering with Fiber-polymer Laminates, Chapman and Hall, New York, 1993, p. 31.
39. C.C. Hsiao, Flow orientation and fracture strength of a model linear hard polymer solid, J. Polymer Sci., 44 (1960) 71-79.
40. K.D. Weaver, W.L. Sauer and N.B. Beals, Clinically relevant UHMWPE quality control, Trans. of the 21st Ann. Meet. of the Society for Biomaterials, Society For Biomaterials, Minneapolis, MN, 1995, p. 372.
41. ASTM Designation F732-82: Standard practice for reciprocating pin-on-flat evaluation of friction and wear properties of polymeric materials for use in total joint prostheses, Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1993, Vol. 13.01, pp. 189-194.
42. F. Bueche, Physical Properties of Polymers, Interscience, New York, 1962.
43. D.C. Evans and J.K. Lancaster, The wear of polymers, in D. Scott (ed.), Treatise on Materials Science and Technology, Academic Press, New York, Vol. 13, 1979, pp. 86-140.
44. A. Wang, D.C. Sun, C. Stark and J.H. Dumbleton, Wear mechanisms of UHMWPE in total joint replacements, Wear, 181-183 (1995) 241-249.