Erratum: Elastic-Plastic Finite Element Analysis of Nonsteady State Partial Slip Wheel-Rail Rolling Contact (Journal of Tribology (2005) 127:4 (713-721) DOI: 10.1115/1.2033898);Elastic-plastic finite element analysis of nonsteady state partial slip wheel-rail rolling contact

Journal of Tribology

Volumn 127, Issue 4, 2005, Pages 713-721

  Wen, Zefeng ^a   Jin, Xuesong ^a   Jiang, Yanyao ^b  

^a SOUTHWEST JIAOTONG UNIVERSITY   (China)

^b Reno   (United States)

Author keywords

Cyclic plasticity; Finite element; Nonsteady state; Partial slip; Residual stress; Rolling contact

Indexed keywords

ELASTOPLASTICITY; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; PLASTIC DEFORMATION; PLASTICITY; RESIDUAL STRESSES; STRAIN;

CYCLIC PLASTICITY; NONSTEADY STATE; PARTIAL SLIP; ROLLING CONTACT;

CONTACTS (FLUID MECHANICS);

ROLLING CONTACT;

EID: 27544454704     PISSN: 07424787     EISSN: 15288897     Source Type: Journal    
DOI: 10.1115/1.2173641     Document Type: Erratum

References (53)

1. Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, Cambridge.
2. Bower, A. F., and Johnson, K. L., 1991, "Plastic Flow and Shakedown of the Rail Surface in Repeated Wheel-Rail Contact", Wear, 114, pp. 1-18.
3. Jiang, Y., and Sehitoglu, H., 1996, "Rolling Contact Stress Analysis with the Application of a New Plasticity Model," Wear, 191, pp. 35-44.
4. Merwin, J. E., and Johnson, K. L., 1963, "An Analysis of Plastic Deformation in Rolling Contact," Proc. Inst. Mech. Eng., 177, pp. 676-685.
5. McDowell, D. L., and Moyar, G. J., 1987, "A More Realistic Model of Nonlinear Material Response: Application to Elastic-Plastic Rolling Contact," Proceedings Second International Symposium Contact Mechanics and Wear of Rail/Wheel Systems, University of Waterloo Press, Waterloo, pp. 100-106.
6. McDowell, D. L., and Moyar, G. J., 1991, "Effects of Non-Linear Kinematic Hardening on Plastic Deformation and Residual Stresses in Rolling Line Contact," Wear, 144, pp. 19-37.
7. Hearle, A. D., and Johnson, K. L., 1987, "Cumulative Plastic Flow in Rolling and Sliding Line Contact," ASME J. Appl. Mech., 54, pp. 1-7.
8. Bower, A. F., and Johnson, K. L., 1989, "The In?uence of Strain Hardening on Cumulative Plastic Deformation in Rolling and Sliding Line Contact," J. Mech. Phys. Solids, 37, pp. 471-493.
9. Yu, C. C., Moran, B., and Keer, L. M., 1993, "A Direct Analysis of Two-Dimensional Elastic-Plastic Rolling Contact," ASME J. Tribol., 115, pp. 227-236.
10. Yu, C. C., Moran, B., and Keer, L. M., 1995, "A Direct Analysis of Three-Dimensional Elastic-Plastic Rolling Contact," ASME J. Tribol., 117, pp. 234-243.
11. Yu, C. C., Keer, L. M., and Steele, R. K., 1997, "Three-Dimensional Residual Stress Effects on the Fatigue Crack Initiation in Rails," ASME J. Tribol., 119, pp. 660-666.
12. Jiang, Y., and Sehitoglu, H., 1994, "An Analytical Approach to Elastic-Plastic Stress Analysis of Rolling Contact," ASME J. Tribol., 116, pp. 577-587.
13. Jiang, Y., and Sehitoglu, H., 1999, "A Model for Rolling Contact Failure," Wear, 224, pp. 38-49.
14. Bhargava, V., Hahn, G. T., and Rubin, C. A., 1985, "An Elastic-Plastic Finite Element Model of Rolling Contact: Part I - Single Contact; Part II - Repeated Contacts," ASME J. Appl. Mech., 52, pp. 66-82.
15. Bhargarva, V., Hahn, G. T., Ham, G., Kulkarni, S., and Rubin, C. A., 1986, "Influence of Kinematic Hardening on Rolling Contact Deformation," Proceedings 3rd International Symposium Contact Mechanics and Wear of Rail/Wheel Systems, Cambridge, pp. 133-146.
16. Bhargava, V., Hahn, G. T., and Rubin, C. A., 1987, "Elastic-Plastic Analysis of Hardened Layers in Rims Subjected to Repeated Rolling Contacts," Metall. Trans. A, 18A, pp. 827-833.
17. Bhargava, V., Hahn, G. T., and Rubin, C. A., 1988, "Analysis of Rolling Contact with Kinematic Hardening for Rail Steel Properties," Wear, 122, pp. 267-283.
18. Bhargava, V., Hahn, G. T., and Rubin, C. A., 1990, "Rolling Contact Deformation, Etching Effects and Failure of High Strength Bearing Steels," Metall. Trans. A, 21A, pp. 1921-1931.
19. Hahn, G. T., Bhargava, V., Rubin, C. A., Chen, Q., and Kim, K., 1987, "Analysis of the Rolling Contact Residual Stresses and Cyclic Plastic Deformation of SAE52100 Steel Ball Bearings," ASME J. Tribol., 109, pp. 618-626.
20. Ham, G. L., Hahn, G. T., Rubin, C. A., and Bhargava, V., 1989, "Finite Element Analysis of the Influence of Kinematic Hardening in Two-Dimensional, Repeated, Rolling-Sliding Contact," Tribol. Trans., 32, pp. 311-316.
21. Kumar, A. M., Hahn, G. T., Bhargava, V., and Rubin, C. A., 1989, "Elasto-Plastic Finite Element Analyses of Two-Dimensional Rolling and Sliding Contact Deformation of Bearing Steel," ASME J. Tribol., 111, pp. 309-314.
22. Kulkarni, S. M., Rubin, C. A., and Hahn, G. T., 1991, "Elasto-Plastic Coupled Temperature-Displacement Finite Element Analysis of Two-Dimensional Rolling-Sliding Contact with a Translating Heat Source," ASME J. Tribol., 113, pp. 93-101.
23. Howell, M., Hahn, G. T., Rubin, C. A., and McDowell, D. L., 1995, "Finite Element Analysis of Rolling Contact for Non-Linear Kinematic Hardening Bearing Steel," ASME J. Tribol., 117, pp. 729-736.
24. Jiang, Y., Chang, J., and Xu, B., 2001, "Elastic-Plastic Finite Element Stress Analysis of Two-dimensional Rolling Contact," Hydraulic Failure Analysis: Fluids, Components, and System Effects, ASTM STP 1339, G. E. Totten, D. K. Wills, and D. Feldmann, eds., American Society for Testing and Materials, West Conshohocken, PA, pp. 59-74.
25. Jiang, Y., Xu, B., and Sehitoglu, H., 2002, "Three-Dimensional Elastic-Plastic Stress Analysis of Rolling Contact," ASME J. Tribol., 124, pp. 699-708.
26. Xu, B., and Jiang, Y., 2002, "Elastic-Plastic Finite Element Analysis of Partial Slip Rolling Contact," ASME J. Tribol., 124, pp. 20-26.
27. Dan Van, K., and Maitournam, M. H., 1993, "Steady-State Flow in Classical Elastoplasticity: Applications to Repeated Rolling and Sliding Contact," J. Mech. Phys. Solids, 41, pp. 1691-1710.
28. Hamilton, G. M,, 1963, "Plastic Flow in Rollers Loaded above the Yield Point," Proc. Inst. Mech. Eng., 177, pp. 667-675.
29. Shima, M., and Okada, K., 1981, "Measurements of Subsurface Plastic Flow in Rolling Contact," Journal of Japan Society of Lubrication Engineers, International Edition, 2, pp. 75-80.
30. Hahn, G. T., and Huang, Q., 1986, "Rolling Contact Deformation of 1100 Aluminum Disks," Metall. Trans. A, 17A, pp. 1561-1572.
31. Carter, F. W., 1926, "On the Action of a Locomotive Driving Wheel," Proc. R. Soc. London, Ser. A 112, pp. 151-157.
32. Chen, Y. C., and Kuang, J. H., 2004, "Partial Slip Rolling Wheel-Rail Contact with a Slant Rail Crack," ASME J. Tribol., 216, pp. 450-458.
33. Jiang, Y., and Sehitoglu, H., 1996, "Modeling of Cyclic Ratchetting Plasticity: Part I - Development of Constitutive Equations," ASME J. Appl. Mech., 63, pp. 720-725.
34. Jiang, Y., and Sehitoglu, H., 1996, "Modeling of Cyclic Ratchetting Plasticity: Part II - Implement of the New Model and Comparison of Theory with Experiments," ASME J. Appl. Mech., 63, pp. 726-733.
35. Ohno, N., and Wang, J. D., 1994, "Kinematic Hardening Rules for Simulation of Ratchetting Behavior," Eur. J. Mech. A/Solids, 13, pp. 519-531.
36. Hibbitt, D., Karlsson, B., and Sorensen, P., 2003, ABAQUS/Standard User's Manual, version 6.4, ABAQUS, Inc., Pawtucket, RI.
37. Jin, X., Wen, Z., Wang, K. and Li, C., 2004, "Effect of Rail Corrugation Formation on Dynamical Behaviour of Rail Vehicle and Track," Proceedings of the 8th International Workshop on Railway Noise, University of Southampton, pp. 345-356.
38. Jiang, Y., and Sehitoglu, H., 1994, "Cyclic Ratchetting of 1070 Steel under Multiaxial Stress State," Int. J. Plast., 10, pp. 579-608.
39. Jiang, Y., and Sehitoglu, H., 1994, "Multiaxial Cyclic Ratchetting under Multiple Step Loading," Int. J. Plast., 10, pp. 849-870.
40. Grassie, S. L., and Kalousek, J., 1993, "Rail Corrugation: Characteristics, Causes and Treatments," Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 207, pp. 57-68.
41. Sato, Y., Matsumoto, A., and Knothe, K., 2002, "Review on Rail Corrugation Studies," Wear, 253, pp. 130-139.
42. Knothe, K., 2001, "Non-Steady State Rolling Contact and Corrugation," Rolling Contact Phenomena, Courses and Lectures, Nr. 411, (2-7, October, 1999, International Centre for Mechanical Sciences, Udine, Italy), Jacobson, B. and Kalker, J. J., eds., Springer, Wien, pp. 203-276.
43. Frederick, C. O., "A Rail Corrugation Theory," in Proceedings of the International Symposium on Contact Mechanics and Wear of Rail-Wheel Systems, II, University of Kingston, Rhode Island, July 1986, Gladwell G. M. L., Ghonem H., and Kalousek J., eds., University of Waterloo Press, Waterloo, pp.181-211.
44. Hempelmann, K., 1995, "Short Pitch Corrugation On Railway Rails - A Linear Model for Prediction," Ph.D thesis, Technische Universitat Berlin, Fortschritt-Berichte VDI, Reihe 12, Nr. 231.
45. Müller, S., 1998, "Linearized Wheel-Rail Dynamics - Stability and Corrugation." Ph.D dissertation, Technische Universitat Berlin, Fortschritt-Berichte VDI, Reihe 12, Nr. 396.
46. Igeland, A., and Ilias, H., 1997, "Rail Head Corrugation Growth Predictions Based on Non-Linear High Frequency Vehicle/Track Interaction," Wear, 213, pp. 90-97.
47. Nielsen, J. B., 1999, "Evolution of Rail Corrugation Predicted with A Nonlinear Wear Model," J. Sound Vib., 227, pp. 915-933.
48. Andersson, C., and Johansson, A., 2004, "Prediction of Rail Corrugation Generated by Three-Dimensional Wheel-Rail Interaction," Wear, 257, pp. 423-434.
49. Jin, X., Wen, Z., Wang, K., and Zhang W., 2004, "Effect of a scratch on curved rail on initiation and evolution of rail corrugation," Tribol. Int., 37, pp. 385-394
50. Böhmer, A., and Klimpel, T., 2002, "Plastic deformation of corrugated rails - A numerical approach using material data of rail steel," Wear, 253, pp.150-161.
51. Liu, Q., Zhang, B., and Zhou, Z., 2003, "An Experiment Study of Rail Corrugation," Wear, 255, pp. 1121-1126.
52. Liu, Q., Jin X., Wang, W., and Zhou Z., 2000, "An Investigation of Rail Corrugation in China," Proceedings of the 5th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, University of Tokyo, pp. 89-95.
53. Jiang, Y., 2000, "A Fatigue Criterion for General Multiaxial Loading," Fatigue Fract. Eng. Mater. Struct., 23, pp. 19-32.