Partial slip rolling wheel-rail contact with a slant rail crack

Journal of Tribology

Volumn 126, Issue 3, 2004, Pages 450-458

  Chen, Yung Chuan ^a,b   Kuang, Jao Hwa ^a,b  

^a NATIONAL PINGTUNG UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Taiwan)

^b NATIONAL SUN YAT SEN UNIVERSITY   (Taiwan)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; INTERFACES (MATERIALS); RAILS; SHEAR STRESS; STRESS INTENSITY FACTORS; WHEELS;

OBLIQUE CRACKS; PARTIAL SLIP ROLLING; SLANT RAIL CRACK;

ROLLING;

CONTACT STRESS; CRACK; ROLLING CONTACT; SHEAR STRESS; SLIP; STRESS INTENSITY FACTOR; WHEEL;

EID: 3543039999     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1759339     Document Type: Article

References (36)

1. Cannon, D. F., and Pradier, H., 1996, "Rail Rolling Contact Fatigue Research by the European Rail Research Institute," Wear, 191, pp. 1-13.
2. Bogdan'ski, S., Olzak, M., and Stupnicki, J., 1996, "Numerical Stress Analysis of Rail Rolling Contact Fatigue Cracks," Wear, 191, pp. 14-24.
3. Jiang, Y., and Sehitoglu, H., 1996, "Rolling Contact Stress Analysis With the Application of A New Plasticity Model," Wear, 191, pp. 35-44.
4. Rinsberg, J. W., Loo-Morrey, M., Kapoor, A., and Beynon, J. H., 2000, "Prediction of Fatigue Crack Initiation for Rolling Contact Fafigue," Int. J. Fatigue, 22, pp. 205-215.
5. Kim, J. K., and Kim, C. S., 2002, "Fatigue Crack Growth Behavior of Rail Steel Under Mode I and Mixed Mode Loadings," Mater. Sci. Eng., A, 338, pp. 191-201.
6. Ringsberg, J. W., 2001, "Life Prediction of Rolling Contact Fatigue Crack Initiation," Int. J. Fatigue, 23, pp. 575-586.
7. Kabo, E., 2002, "Material Defects in Rolling Contact Fatigue-Influence of Overloads and Defect Clusters," Int. J. Fatigue, 24, pp. 887-894.
8. Ertz, M., and Knothe, K., 2002, "A Comparison of Analytical and Numerical Methods for the Calculation of Temperatures in Wheel/Rrail Contact," Wear, 253, pp. 498-508.
9. Yan, W., and Fischer, F. D., 2000, "Applicability of the Hertz Contact Theory to Rail-Wheel Contact Problems," Arch. Appl. Mech., 70, pp. 255-268.
10. Bijak-Zochowski, M., and Marek, P., 1997, "Residual Stress in Some Elasto-Plastic Problems of Rolling Contact With Friction," Int. J. Mech. Sci., 39, pp. 15-32.
11. Yu, C. C., and Keer, L. M., 1997, "Three-Dimensional Residual Stress Effects on the Fatigue Crack Initiation in Rails," ASME J. Tribol., 119, pp. 660-666.
12. Telliskivi, T., and Olofsson, U., 2001, "Contact Mechanics Analysis of Measured Wheel-Rail Profiles Using the Finite Element Method," Proc. Instn. Mech. Engrs., Part F, 21, pp. 65-72.
13. Pau, M., Aymerich, F., and Ginesu, F., 2002, "Distribution of Contact Pressure in Wheel-Rail Contact Area," Wear, 253, pp. 265-274.
14. Tyfour, W. R., Beynon, J. H., and Kapoor, A., 1996, "Deterioration of Rolling Contact Fatigue Life of Pearlitic Rail Steel Due to Dry-Wet Rolling-Sliding Line Contact," Wear, 197, pp. 255-265.
15. Ramanan, L., Krishna, Kumar R., and Sriraman, R., 1999, "Thermo-Mechanical Finite Element Analysis of A Rail Wheel," Int. J. Mech. Sci., 41, pp. 487-505.
16. Bogdan'ski, S., and Browen, M., 2002, "Modelling the Three-Dimensional Behavior of Shallow Rolling Contact Fatigue Cracks in Rails," Wear, 253, pp. 17-25.
17. Chen, H., Ban, T., Ishida, M., and Nakahara, T., 2002, "Adhesion Between Rail/Wheel Under Water Lubricated Contact," Wear, 253, pp. 75-81.
18. Zhang, W., Chen, J., Wu, X., and Jin, X., 2002, "Wheel/Rail Adhesion and Analysis by Using Full Scale Roller Rig," Wear, 253, pp. 82-88.
19. Jin, X., Wu, P., and Wen, Z., 2002, "Effects of Structure Elastic Deformation of Wheelset and Track on Creep Forces of Wheel/Rail in Rolling Contact," Wear, 253, pp. 247-256.
20. Farris, T. N., 1996, "Effects of Overlapping Wheel Passages on Residual Stress in Rail Corners," Wear, 191, pp. 226-236.
21. Bower, A. F., 1988, "The Influence of Crack Face Friction and Trapped Fluid on Surface Initiated Rolling Contact Fatigue Cracks," ASME J. Tribol., 110, pp. 704-711.
22. Komvopoulos, K., and Cho, S. S., 1997, "Finite Element Analysis of Subsurface Crack Propagation in A Half-Space Due to A Moving Asperity Contact," Wear, 209, pp. 57-68.
23. Chen, S. Y., Farris, T. N., and Chandrasekar, S., 1995, "Contact Mechanics of Hertzian Cone Cracking," Int. J. Solids Struct., 32, pp. 329-340.
24. Kulkarni, S. M., Hahn, G. T., Rubin, C. A., and Bhargava, V., 1991, "Elasto-Plastic Finite Element Analysis of Repeated Three-Dimensional, Elliptical Rolling With Rail Wheel Properties," ASME J. Appl. Mech., 113, pp. 434-441.
25. Kulkarni, S. M., Hahn, G. T., Rubin, C. A., and Bhargava, V., 1990. "Elastic-plastic Finite Element Analysis of Three-Dimensional, Pure Rolling Contact at the Shakedown Limit," ASME J. Appl. Mech., 57, pp. 57-65.
26. Hertz, H., 1882, "Über die Berührung Fester Elastischer Körper," J. Reine Angew. Math., 92, pp. 156-171.
27. Hills, D. A., 1993, Mechanics of Elastic Contacts, Butterworth-Heinemann Ltd., Chap. 4.
28. Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, Chap. 8.
29. Cater, F. W., 1926, "On The Action of A Locomotive Driving Wheel," Proc. R. Soc. London, Ser. A, 112, pp. 151-157.
30. Xu, B., and Jiang, Y., 2002, "Elastic-Plastic Finite Element Analysis of Partial Slip Rolling Contact," ASME J. Tribol., 124, pp. 20-26.
31. Kuang, J. H., and Chen, L. S., 1993, "A Displacement Extrapolation Method for Two-Dimensional Mixed-Mode Crack Problems," Eng. Fract. Mech., 46, pp. 735-741.
32. Kapoor, A., Franklin, F. J., Wong, S. K., and Ishida, M., 2002, "Surface Roughness and Plastic Flow in Rail Wheel Contact," Wear, 253, pp. 257-264.
33. Chan, S. K., Tuba, I. S., and Wilson, W. K., 1970, "On The Finite Element Method in Linear Fracture Mechanics," Eng. Fract. Mech., 2, pp. 1-17.
34. ABAQUS User's Manual, 1998, Version 5.8, Hibbitt, Karlsson and Sorensen, Inc.
35. Hills, D. A., and Ashelby, D. W., 1979, "On The Application of Fracture Mechanics to Wear," Wear, 54, pp. 321-330.
36. Hills, D. A., and Ashelby, D. W., 1980, "On The Determination of Stress Intensification Factors for a Wearing Half-Space," Eng. Fract. Mech., 13, pp. 69-78.