Recent development in micro-handling systems for micro-manufacturing

Journal of Materials Processing Technology

Volumn 167, Issue 2-3, 2005, Pages 499-507

  Sanchez Salmeron, A J ^a   Lopez Tarazon, R ^b   Guzman Diana, R ^b   Ricolfe Viala, C ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

^b Hegaltec SLL   (Spain)

Author keywords

Automation; Micro handling systems; Micro parts; Standards

Indexed keywords

AUTOMATION; COMPONENTS; PRECISION ENGINEERING; PROBLEM SOLVING; STANDARDIZATION; STANDARDS;

AUTOMATION SOLUTIONS; MICRO-HANDLING SYSTEMS; MICRO-PARTS;

MATERIALS HANDLING;

EID: 23844558109     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2005.06.027     Document Type: Article

References (75)

1. R.S. Fearing, Survey of sticking effects for micro parts handling, in: Proceedings of the IEEE/RSJ Intelligent Robots Systems, 1995, pp. 212-217.
2. A.E. Quaid, R.L. Hollis, Cooperative 2-dof robots for precision assembly, IEEE International Conference on Robotics and Automation, Minneapolis, Minnesota, April 1996.
3. W. Zesch, Multi-degree-of-freedom micropositioning using stepping principles, Ph.D. thesis, Swiss Federal Institute of Technology, Zurich, Switzerland, 1997.
4. G. Danuser, I. Pappas, B. Vögeli, W. Zesch, J. Dual, Manipulation of microscopic objects with nanometer precision: potentials and limitations in nano-robot design, Int. J. Robotics Res., August 1997, http://robotics.eecs. berkeley.edu/∼zesch/papers/IJR97.ps.gz.
5. A. Burisch, S. Soetebier, J. Wrege, Design of a parallel hybrid micro-scara robot for high precision assembly, Institute of Machine Tools and Production Technology (IWF), Technical University of Braunschweig, 2004.
6. F.M. Moesner, T. Higuchi, Contactless manipulation of microparts by electric field traps, in: Proceedings of the SPIEÕs International Symposium on Microrobotics and Microsystem Fabrication, vol. 3202, Pittsburgh, October 1997, pp. 168-175.
7. W.H. Chu, M. Mehregany, Microfabricated tweezer with a large gripping force and a large range of motion, in: Proceedings of the Solid State Sensor and Actuator Workshop, Hilton Head, SC, June 1994, pp. 107-111.
8. C.G. Keller, Micro-grippers with integrated actuator and force sensors, in: Proceedings of the World Automation Congress '98, Anchorage, Alaska, 10-14 May 1998, pp. ISORA-064.1-064.6.
9. C.G. Keller, Microfabricated silicon high aspect ratio flexures for in-plane motion, Ph.D. thesis, Department of Materials Science and Mineral Engineering, University of California, at Berkeley, 1998.
10. S. Kota, G.K. Ananthasuresh, S.B. Crary, and K.D. Wise Design and fabrication of microelectromechanical systems J. Mech. Design 116 1994 1081 1088
11. T. Tanikawa, and T. Arai Development of a micro-manipulation system having a two fingered micro-hand IEEE Trans. Robotics Automation 15 1 1999 152 162
12. St. Fahlbusch, S. Fatikow, Micro force sensing in a micro robotic system, in: Proceedings of the 2001 IEEE International Conference on Robotics, 2001.
13. E. Eisinberg, A. Menciassi, S. Micera, D. Campolo, M.C. Carrozza, P. Dario, PI force control of microgripper for assembling biomedical microdevices, Scuola Superiore Sant'Anna, MiTech Lab, Pisa, Italy.
14. M. Goldfarb, and N. Celanovic A flexure-based gripper for small-scale manipulation Robotica 17 1999 181 187
15. M.C. Carrozza, A. Eisinberg, A. Menciassi, D. Campolo, S. Micera, and P. Dario Towards a force-controlled microgripper for assembling biomedical microdevices J. Micromech. Microeng. 10 2 2000 271 276
16. A. Menciassi, A. Eisinberg, M. Mazzoni, G. Scalari, P. Dario, Handling AFM cantilever chips by a force feedback-based micromanipulation system, in: Proceedings of the 2001 IEEE Conference on Nano-manipulation II, October 2001, pp. 157-161.
17. Y. Zhou, B.J. Nelson, The effects of material properties and gripping force on micrograsping, in: Proceedings of the 2000 IEEE International Conference on Robotics and Automation, San Francisco, CA, April 2000, pp. 1115-1119.
18. R. Keoschkerjan, H. Wurmus, A novel microgripper with parallel movement of gripping arms, actuator 2002, in: Proceedings of the Eighth International Conference on New Actuators, Bremen, Germany, 10-12 June 2002, pp. 321-324.
19. G. Krijnen, R. Haanstra, E. Potters, J.W. Berenschot, S. von Harrach, and M. Elwenspoek Protruding microgripper with force amplification and parallel jaw motion for in situ sample manipulation in SEM and FIB-machines Proceedings of the 12th International Conference on Solid State Sensors, Actuators and Microsystems, vol. 1 Boston, 8-12 June 2003 268 271
20. O. Young Seok, W.H. Lee, H.E. Stephanou, and G.D. Skidmore Design, optimization, and experiments of compliant microgripper Proceedings of IMECE'03 ASME International Mechanical Engineering Congress Washington, DC, 15-21 November 2003
21. W.H. Lee, B.H. Kang, Y.S. Oh, and H. Stephanou Micropeg manipulation with a compliant microgripper Proceedings of the 2003 IEEE International Conference on Robotics and Automation Taipei, Taiwan 14-19 September 2003
22. M. Kohl, E. Just, W. Pfleging, and S. Miyazaki SMA microgripper with integrated antagonism Sens. Actuators 83 2000 208 213
23. Y. Bellouard Microgrippers technologies overview Proceedings of the Workshop on Manipulation at Micro and Nano Scales (WS4), IEEE International Conference on Robotics and Automation Katholieke Universiteit, Leuven, Belgium, 16-21 May 1998
24. B. Winzek, S. Schmitz, and T. Sterzl Microgrippers with Shape Memory Thin Film Actuators 2004 Center of advanced European Studies and Research (Caesar) Ludwig-Erhard-Allee 2, Bonn, Germany
25. J. Schlick, D. Zuehlke, Design concept for tong grippers for automated micro-assembly, Institute for Production Automation, University of Kaiserslautern, Germany.
26. J. Schlick, D. Zuehlke, Smart Tong, Grippers for Micro-Parts, Institute for Production Automation, Kaiserslautern University of Technology, P.O. Box 3049, 67653 Kaiserslautern, Germany.
27. D. Petrovic, E. Chatzitheodoridis, G. Popovic, O. Del Medico, A. Almansz, W. Brenner, H. Detter, R. Martins, E. Fortunato, Design of a mechanical gripper for assembly of micro-parts, in: Proceedings of XXX Convegno Nazionale AIAS-Alghero (SS), 12-15 September 2001, pp. 1369-1373.
28. D.-H. Kim, B. Kim, H. Kang, and J.-O. Park Force feedback-based microassembly system integrated with a piezoelectrically sensorized microgripper Proceedings of the 2nd International Conference on Mechatronics and Information Technology Korea 2003 287 298
29. W. Chen, W. Lin, Design of a flexure-based gripper used in optical fiber handling, SIMTech Technical report, 2003.
30. S. Henein, M. Thurner, A. Steinecker, Flexible micro-gripper for micro-factory robots, Created by SHe/Rev, 10 July 2003.
31. R.M. Voyles, and S. Hulst Micro/Macro Force-Servoed Gripper For Precision Photonics Assembly And Analysis 2002 Computer Science and Engineering, University of Minnesota
32. J.A. Thompson, and R.S. Fearing Automating micro-assembly and ortho-tweezers and force sensing Proceedings of the IEEE/RSJ International Conference on Intelligent Robots Systems IROS 2001, October 29-November 3 Maui, HI 2001 1327 1334
33. S. Sakai, N. Tsuda, and R. Fujimori Development and assembling of Chopstic-type micro manipulator R. Hollis B. Nelson Proceedings of the Third International Workshop on Microfactories (IWMF'02) Minneapolis, MN, USA, September 16-18 2002 113 116
34. A. Hofmann, F. Engelhardt, R. Fodor, U. Gengenbach, and R. Scharnowell Modules of the microgripper construction Kit - fine positioning, compliance R. Hollis B. Nelson Proceedings of the Third International Workshop on Microfactories (IWMF'02) Minneapolis, MN, USA, September 16-18 2002 129 132
35. T. Tanikawa, H. Maekawa, K. Kaneko, M. Tanaka, Micro arm for transfer and micro hand for assembly on machining microfactory, in: Proceedings of the Second International Workshop on Microfactories, Fribourg, Switezerland, 2000, FSRM, pp. 155-158.
36. Pham-Van-Diep, P. Keeley, E.P. Muntz, and D.P. Weaver Rarefied gas dynamics J. Harvey G. Lord Proceedings 19th International Symposium on Rarefied Gas Dynamics 1995 Oxford University Press Oxford 715 721
37. S.E. Vargo, E.P. Muntz, G.R. Shiflett, and W.C. Tang The Knudsen Compressor as a Micro and Macroscale Vacuum Pump Without Moving Parts or Fluids 1998 Department of Aerospace and Mechanical Engineering, University of Southern California Los Angeles, CA
38. W. Zesch, M. Brunner, and A. Weber Vacuum tool for handling micro-objects with a nanorobot Proceedings of the IEEE International Conference on Robotics and Automation, vol. 2, 20-25 April 1997 1761 1766
39. J.W. Judy, and N. Myung Magnetic materials for MEMS Proceedings of the MRS Workshop on MEMS Materials San Francisco, CA, 5-6 April 2002 23 26
40. H.H. Yang, N.V. Myung, J. Yee, D.Y. Park, B.Y. Yoo, M. Schwartz, K. Nobe, J.W. Judy, Ferromagnetic Micromechanical Magnetometers, Transducers 2001. Munich, Germany, June 2001, pp. 164-167.
41. J. Arlt, V. Garces-Chavez, W. Sibbett, and K. Dholakia Optical micro-manipulation using a Bessel light beam Opt. Commun. 197 2001 239 245
42. A. Ashkin Atomic-beam deflection by resonance-radiation pressure Phys. Rev. Lett. 24 4 1970
43. A. Ashkin, J.M. Dziedzic, J.E. Bjorkholm, and S. Chu Observation of a single-beam gradient force optical trap for dielectric particles Opt. Lett. 11 5 1986 288 290
44. P.A. Bancel, V.B. Cajipe, F. Rodier, and J. Witz Laser seeding for biomolecular crystallization J. Cryst. Growth 191 1998 537 544
45. P.A. Bancel, V.B. Cajipe, and F. Rodier Manipulating crystals with light J. Cryst. Growth 196 1999 685 690
46. N. Malagnino, G. Pesce, A. Sasso, and Arimondo Opt. Commun. 214 2002 15 24
47. C.L. Rambin, and R.O. Warrington Micro-assembly with a focused laser beam IEEE MEMS 1994 285 290
48. K. Taguchi, M. Tanaka, and M. Ikeda Opt. Commun. 194 2001 67 73
49. J. Peirs, Design of micromechatronic systems: scale laws, technologies and medical applications, Ph.D. thesis 2001, Katholieke Universiteit Leuven, Belgium, May 2001.
50. F. Erzincanli, J.M. Sharp, and S. Erhal Design and operational considerations of a non-contact robotic handling system for non-rigid materials Int. J. Machine Tools Manufacture 38 4 1998 353 361
51. C. Waltham, S. Bendall, and A. Kotlicki Bernoulli levitation Am. J. Phys. 71 2 2003 176 179
52. U. Gengenbach, and J. Boole Electrostatic feeder for contactless transport of miniature and microparts Proceedings of the SPIE Conference on Microrobotics and Microassembly II 2000 75 81
53. M.B. Barmatz, and P. Collas Acoustic radiation potential on a sphere in place, cylindrical, and spherical standing wave fields J. Acoust. Soc. Am. 77 3 1985 928 945
54. B.-T. Chu, and R.E. Apfel Acoustic radiation pressure produced by a beam of sound J. Acoust. Soc. Am. 72 6 1982 1673 1687
55. W.T. Coakley, J.J. Hawkes, M.A. Sobanski, C.M. Cousins, and J. Spengler Analytical scale ultrasonic standing wave manipulation of cells and microparticles Ultrasonics 38 2000 638 641
56. L.P. Gor'kov Soviet Physics Doklady 6 9 1962 773 775
57. A. Haake, and J. Dual Micro-manipulation of small particles by node position control of an ultrasonic standing wave Ultrasonics 40 2002 317 322
58. J. Höppner, Verfahren zur berührungslosen Handhabung mittels leistungsstarker Schallwandler, Technische Universität München, Ph.D. thesis, 2002.
59. L. King Proc. R. Soc. London A 1934 212 240
60. G. Reinhart, J. Höppner, and J. Zimmermann Proceedings of the 7th Mechatronics Forum International Conference 2000
61. K. Yasuda Sens. Actuators B 64 2000 128 135
62. K. Yosioka, and Y. Kawasima Acoustica 5 1955 167 178
63. Y. Hashimoto, Y. Koike, and S. Ueha Transporting objects without contact using flexural traveling waves J. Acoust. Soc. Am. 103 1998
64. S. Ueha, Y. Hashimoto, and Y. Koike Non-contact transportation using near-field acoustic levitation Ultrasonics 38 2000 26 32
65. M. Wiesendanger, Ph.D. thesis, Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland, 2001.
66. K. Koyano, and T. Sato Micro object handling system with concentrated visual fields and new handling skills Proceedings of the 1996 IEEE International Conference on Robotics and Automation 1996 2541 2548
67. A. Sulzmann, J.M. Breguet, and J. Jacot Micromotor assembly using high accurate optical vision feedback for microrobot relative 3D displacement in submicron range Proceedings of the 1997 International Conference on Solid-State Sensors Actuators (Transducers 97) 1997 279 282
68. B. Vikramaditya, and B.J. Nelson Visually guided microassembly using optical microscopes and active vision techniques Proceedings of the 1997 IEEE International Conference on Robotics and Automation Albuquerque, NM, 21-27 April 1997 3172 3177
69. S.J. Ralis, B. Vikramaditya, and B.J. Nelson Micropositioning of a weakly calibrated microassembly system using coarse-to-fine visual servoing strategies IEEE Trans. Electronics Packaging Manufacturing 23 2 2000
70. K.K. Tan, S.N. Huang, and T.H. Lee Robust adaptive numerical compensation for friction and force ripple in permanent-magnet linear motors IEEE Trans. Magn. 38 1 2002 221 228
71. K.K. Tan, H.F. Dou, Y.Q. Chen, and T.H. Lee High precision linear motor control via relay-tuning and iterative learning based on zero-phase filtering IEEE Trans. Contr. Syst. Technol. 9 2 2001 244 253
72. B.K. Kim, and W.K. Chung Performance predictable design of robust motion controllers for high-precision servo systems Proceedings of American Control Conference, vol. 3 Arlington, VA, June 2001 2249 2254
73. L. Xu, and B. Yao Adaptive robust precision motion control of linear motors with negligible electrical dynamics: theory and experiments IEEE/ASME Trans. Mechatron. 6 4 2001 444 452
74. J.Y. Hung, W.B. Gao, and J.C. Hung Variable structure control: a survey IEEE Trans. Ind. Electron. 40 1 1993 2 22
75. H.C. Liaw, Y.P. Leow, S.N. Huang, S.Y. Lim, W. Lin, Control of high-precision linear motion systems, Technical Report at Singapore Institute of Manufacturing Technology, reference number STR/03/039/MECH, 2003.