Measurement of the relative motion between an implant and bone under cyclic loading

Strain

Volumn 40, Issue 4, 2004, Pages 193-202

  Britton, J R ^a   Lyons, C G ^a   Prendergast, P J ^a  

^a TRINITY COLLEGE DUBLIN   (Ireland)

Author keywords

Biomechanics; Femoral component; Hip prosthesis; Implant migration; Migration measurement

Indexed keywords

BONE; CYCLIC LOADS; DEFORMATION; ELASTICITY; HIP PROSTHESES; IMPLANTS (SURGICAL); TEMPERATURE;

ELASTIC DEFORMATIONS; FEMORAL COMPONENT; IMPLANT MIGRATION; MIGRATION MEASUREMENT;

BIOMECHANICS;

EID: 10244222212     PISSN: 00392103     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1475-1305.2004.00167.x     Document Type: Article

References (50)

1. Prendergast, P. J. (2001) Bone prostheses and implants. In: Bone Mechanics, Chapter 35 (S. C. Cowin, Ed.). CRC Press, Boca Raton, FL: 35-1-35-29.
2. Kärrholm, J., Nivbrant, B., Thanner, J., Anderberg, C., Borlin, N., Herberts, P. and Malchau, H. (2000) Radio-stereometric evaluation of hip implant design and surface finish. Technical report, Departments of Orthopaedics and Computing Science at Göteborg University and Umeå University, Sweden. Scientific exhibition presented at the 67th Annual Meeting of the American Academy of Orthopaedic Surgeons, Orlando, FL: 1-12.
3. Kärrholm, J., Borssen, B., Lowenhielm, G. and Snorrason, F. (1994) Does early micromotion of femoral stem prostheses matter? J. Bone Joint Surg. B76, 912-917.
4. Kiss, J., Murray, D. W., Turner-Smith, A. R. and Bulstrode, C. J. (1995) Roentgen stereophotogrammetric analysis for assessing migration of total hip replacement femoral components. Proc. Inst. Mech. Eng. [H] 209, 169-175.
5. Alfaro-Adrian, J., Gill, H. S. and Murray, D. W. (1999) Cement migration after THR: a comparison of Charnley Elite and Exeter femoral stems using RSA. J. Bone Joint Surg. B81, 130-134.
6. Søballe, K., Hansen, E. S., Brockstedt-Rasmussen, H., Jorgensen, P. H. and Bunger, C. (1992) Tissue ingrowth into titanium and hydroxyapatite-coated implants during stable and unstable mechanical conditions. J. Orthop. Res. 10, 285-299.
7. Engh, C. A., O'Connor, D., Jasty, M., McGovern, T. F., Bobyn, J. D. and Harris W. H. (1992) Quantification of implant micromotion, stress shielding, and bone resorption with porous-coated anatomic medullary locking femoral prostheses. Clin. Orthop. 285, 13-29.
8. Kärrholm, J., Herberts, P., Hultmark, P., Malchau, H., Nivbrant, B. and Thanner, J. (1997) Radiostereometry of hip prostheses. Clin. Orthop. 344, 94-110.
9. Verdonschot, N., Barink, M., Stolk, J., Gardeniers, J. W. M. and Schreurs B. W. (2002) Do unloading periods affect migration characteristics of cemented femoral components? An in vitro evaluation with the Exeter stem. Acta. Orthop. Belg. 68, 348-355.
10. Charnley, J. and Kettlewell, J. (1965) The elimination of slip between prosthesis and femur. J. Bone Joint Surg. B47, 56-60.
11. Whiteside, L. A. and Easley, J. C. (1989) The effect of collar and distal stem fixation on micromotion of the femoral stem in uncemented total hip arthroplasty. Clin. Orthop. 239, 145-152.
12. Humphreys, P. K., Orr, J. F. and Bahrani, A. S. (1991) An investigation into the fixation of hip replacements. Proc. Inst. Mech. Eng. [H] 205, 145-153.
13. Markolf, K. L., Amstutz, H. A. and Hirschowitz, D. L. (1980) The effect of calcar contact on femoral component micromotion. J. Bone Joint Surg. A62, 1315-1323.
14. Manley, M., Stern, L. S., Kotzar, G. and Stulberg, B. N. (1987) Femoral component loosening in hip arthroplasty. Acta Orthop. Scand. 58 485-490.
15. Verdonschot, N. and Huiskes, R. (1998) Surface roughness of debonded straight-tapered stems in cemented THA reduces subsidence bur not cement damage. Biomaterials 19, 1773-1779.
16. Walker, P. S., Schneeweis, D., Murphy, S. and Nelson, P. (1987) Strains and micromotions of press-fit femoral stem prostheses. J. Biomech. 20, 693-702.
17. Nunn, D., Freeman, M. A. R., Tanner, K. E. and Bonfield, W. (1989) Torsional stability of the femoral component of hip arthroplasty. J. Bone Joint Surg. B71, 452-455.
18. Schneider, E., Kinast, C., Eulenberger, J., Wyder, D., Eskilsson, G. and Perren, S. M. (1989) A comparative study of the initial stability of cementless hip prostheses. Clin. Orthop. 248, 200-209.
19. Burke, D. W., O'Connor, D., Zalenski, E. B., Jasty M. and Harris, W. H. (1991). Micromotion of cemented and uncemented femoral components. J. Bone Joint Surg. B73, 33-37.
20. Callaghan, J., Fulghum, C. S., Glisson, R. R. and Stranne, S. K. (1992) The effect of femoral stem geometry on interface motion in uncemented porous-coated total hip prostheses. J. Bone Joint Surg. A74, 839-847.
21. McKellop, H., Ebramzadeh, E., Niederer, P. G. and Sarmiento, A. (1991) Comparison of the stability of press-fit hip prosthesis femoral stems using a synthetic model femur. J. Orthop. Res. 9, 297-305.
22. Gilbert, J. L., Bloomfield, R. S., Lautenschlager, E. P. and Wixson, R. L. (1992) A computer-based biomechanical analysis of the three-dimensional motion of cementless hip prostheses. J. Biomech. 25, 329-340.
23. Munting, E. and Verhelpen, M. (1993) Mechanical simulator for the upper femur. Acta. Orthop. Belg. 59, 123-129.
24. Munting, E. and Verhelpen, M. (1995) Fixation and effect on bone strain pattern of a stemless hip prosthesis. J. Biomech. 28, 949-961.
25. Berzins, A., Sumner, D. R., Andriacchi, T. P. and Galante, J. O. (1993) Stem curvature and load angle influence the initial relative bone-implant motion of cementless femoral stems. J. Orthop. Res. 11, 769-785.
26. Maher, S. A., Prendergast, P. J. and Lyons, C. G. (2001) Measurement of the migration of a cemented hip prosthesis in an in vitro test. Clin. Biomech. 16, 307-314.
27. Maher, S. A. and Prendergast, P. J. (2002) Discriminating the loosening behaviour of cemented hip prostheses using measurements of migration and inducible displacement. J. Biomech. 35, 257-265.
28. Britton, J. R., Walsh, L. A. and Prendergast, P. J. (2003) Mechanical simulation of muscle loading on the proximal femur: analysis of cemented femoral component migration with and without muscle loading. Clin. Biomech. 18, 637-646.
29. Britton, J. R. (2004) Failure of Cemented Hip Implants Under Complex Loading: Experimental and Numerical Analysis. PhD Thesis, University of Dublin.
30. Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. and McCaskie, A. W. (2003) A preliminary hip joint simulator study of the migration of a cemented femoral stem. Proc. Inst. Mech. Eng. [H] 217, 127-135.
31. Hua, J. and Walker, P. S. (1994) Relative motion of hip stems under load. J. Bone Joint Surg. A76, 95-103.
32. Harman, M. K., Toni, A., Cristofolini, L. and Viceconti, M. (1995) Initial stability of uncemented hip stems: an in vitro protocol to measure torsional interface motion. Med. Eng. Phys. 17, 163-171.
33. Monti, L., Cristofolini, L. and Viceconti, M. (1999) Methods for quantitative analysis of the primary stability in uncemented hip prostheses. Artif. Organs 23, 851-859.
34. Baleani, M., Cristofolini, L. and Toni, A. (2000) Initial stability of a new hybrid fixation hip stem: experimental measurement of implant-bone micromotion under torsional load in comparison with cemented and cementless stems. J. Biomed. Mater. Res. 50, 605-615.
35. Viceconti, M., Cristofolini, L., Baleani, M. and Toni, A. (2001) Pre-clinical validation of a new partially cemented femoral prosthesis by synergetic use of numerical and experimental methods. J. Biomech. 34, 723-731.
36. Cristofolini, L., SaponaraTeutonico, A., Monti, L., Cappello, A. and Toni, A., (2003) Comparative in vitro study on the long term performance of cemented hip stems: validation of a protocol to discriminate between "good" and "bad" designs. J. Biomech. 36, 1603-1615.
37. Buhler, D. W., Oxland, T. R. and Nolte, L. P. (1997) Design and evaluation of a device for measuring three-dimensional micromotions of press-fit femoral stems prostheses. Med. Eng. Phys. 19, 187-199.
38. Buhler, D. W., Berlemann, U., Lippuner, K., Jaeger, P. and Nolte, L. P. (1997) Three-dimensional primary stability of cementless femoral stems. Clin. Biomech. 12, 75-86.
39. Speirs, A. D., Slomczykowski, M. A., Orr, T. E., Siebenrock, K. and Nolte, L. P. (2000) Three-dimensional measurement of cemented femoral stem stability: an in vitro cadaver study. Clin. Biomech. 15 248-255.
40. Bachus, K. N., Bloebaum, R. D. and Jones, R. E. (1999) Comparative micromotion of fully and proximally cemented femoral stems. Clin. Orthop. 366, 248-257.
41. Doehring, T. C., Rubash, H. E. and Dore, D. E. (1999) Micromotion measurements with hip center and modular neck length alterations. Clin. Orthop. 362, 230-239.
42. Claes, L., Fiedler, S., Ohnmacht, M. and Duda, G. N. (2000) Initial stability of fully and partially cemented femoral stems. Clin. Biomech. 15, 750-755.
43. Maher, S. A. (2000) Design and development of a pre-clinical test for cemented femoral hip replacements. PhD Thesis, University of Dublin.
44. Szivek, J. A., Weng, M. and Karpman, R. (1990) Variability in the torsional and bending response of a commercially available composite femur. J. Appl. Biomater. 1, 183-186.
45. Cristofolini, L., Viceconti, M., Cappello, A. and Toni, A. (1996) Mechanical validation of whole bone composite femur models. J. Biomech. 29, 525-535.
46. Pauwels, F. (1965) Gesammelte Abhandlungen zur funktionellen Anatomie des Bewegungsapparates. Springer-Verlag, Berlin, Germany. Translated by P. Maquet and R. Furlong as 'Biomechanics of the Locomotor Apparatus', 1980.
47. Morlock, M. M., Lechert, B., Basedow, S., Götzen, N., Reich, J., Grupp, T. and Wening, V. J. (2004) Investigation of composite femurs as models for human femurs in preclinical testing of femoral ostheosynthesis implants. 14th Proceedings of the Congress. European Society of Biomechanics, 's-Hertogenbosch, the Netherlands (CD-ROM).
48. Prendergast, P. J. and Maher, S. A. (2001) Issues in pre-clinical testing of implants. J. Mater. Process. Technol. 118, 337-342.
49. Walsh, L. A. (2003) Measurement of loosening of cemented and cementless hip prostheses. MSc Thesis, University of Dublin.
50. Hardinge, K. (1983) Hip Replacement. The Facts. Oxford University Press, Oxford.