A preliminary hip joint simulator study of the migration of a cemented femoral stem

Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine

Volumn 217, Issue 2, 2003, Pages 127-135

  Liu, C ^a,b   Green, S M ^b   Watkins, N D ^c   Gregg, P J ^d   McCaskie, A W ^a  

^a NEWCASTLE UNIVERSITY   (United Kingdom)

^b DURHAM UNIVERSITY   (United Kingdom)

^c Synthes Technical Center   (United Kingdom)

^d JAMES COOK UNIVERSITY HOSPITAL   (United Kingdom)

Author keywords

Hip joint simulator; Loosening; Stem migration; Total hip replacement

Indexed keywords

CLINICAL LABORATORIES; CYCLIC LOADS; HIP PROSTHESES; IMPLANTS (SURGICAL); SIMULATORS; ARTHROPLASTY; DYNAMIC LOADS; JOINT PROSTHESES; PROSTHETICS;

STEM MIGRATION;

BIOMEDICAL ENGINEERING; HIP PROSTHESES;

CEMENTED HIP PROSTHESIS; COMPOSITE FEMORA; DYNAMIC LOADINGS; HIP JOINT SIMULATORS; LOOSENING; MIGRATION PATTERNS; STEM MIGRATION; TOTAL HIP REPLACEMENT (THR);

ARTICLE; CEMENTATION; COMPRESSIVE STRENGTH; EQUIPMENT; EQUIPMENT DESIGN; EVALUATION; FEASIBILITY STUDY; FEMUR; HIP; HIP PROSTHESIS; HUMAN; INSTRUMENTATION; LUBRICATION; METHODOLOGY; MOTION; PATHOPHYSIOLOGY; PROSTHESIS; PROSTHESIS FAILURE; SENSITIVITY AND SPECIFICITY; VALIDATION STUDY; WALKING; WEIGHT BEARING;

CEMENTATION; COMPRESSIVE STRENGTH; EQUIPMENT DESIGN; EQUIPMENT FAILURE ANALYSIS; FEASIBILITY STUDIES; FEMUR; HIP JOINT; HIP PROSTHESIS; HUMANS; LUBRICATION; MOTION; PROSTHESIS DESIGN; PROSTHESIS FAILURE; SENSITIVITY AND SPECIFICITY; WALKING; WEIGHT-BEARING;

EID: 0037239608     PISSN: 09544119     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544110360579349     Document Type: Conference Paper

References (46)

1. Wang, C. T., Wang, Y. L. and Liu, G. A. Theoretical and experimental studies of mechanisms for loosening of prosthesis. Trans. ASME, Appl. Mechanics Div., 1989, 98, 225-228.
2. Harris, W. H. The first 32 years of total hip arthroplasty. Clin. Orthop. and Related Res., 1992, 274, 6-11.
3. Collier, J. P., Bauer, T. M. and Bleoebaum, R. D. Results of implant retrieval from postmortem specimens in patients with well functioning, long term total hip replacement. Clin. Orthop. and Related Res., 1992, 274, 97-112.
4. Maher, S. A., Prendergast, P. J. and Waide, D. V. Development of an experimental procedure for pre-clinical testing of cemented hip replacements. Trans. ASME, Bioengng Div. (Publication) BED, 1999, 43, 139-140.
5. Maher, S. A., Prendergast, P. J. and Lyons, C. G. Measurement of the migration of cemented hip pros-thesis - an In vitro test. Clin. Biomechanics, 2001, 16, 307-314.
6. Villa, T., Pietrabissa, R. and Quaglini, V. Testing procedure for biomechanical evaluation for nailed femur. In Proceedings of the 12th European Conference on Biomechanics, Dublin, 2000; p. 109.
7. Maher, S. A. and Prendergast, P. J. Subsidence rates correlate with early failure in cemented hip prosthesis designs. In Proceedings of the 12th European Conference on Biomechanics, Dublin, 2000, p. 111.
8. Costi, J. J., Dunlop, D. G. and Barker, D. S. Design and evaluation of a method: measuring three-dimensional micromotion in a hip replacement. In Proceedings of the 12th European Conference on Biomechanics, Dublin, 2000, p. 199.
9. Saponara, T., Cristofolini, L. and Toni, A. In vitro physiological load history to test cemented hip implants. In Proceedings of the Combined Orthopaedic Research Societies Meeting, Rhodes, Greece, 2001; p. 333.
10. Britton, J. R. and Prendergast, P. J. Design of a system for the application of muscle loading to the implanted proximal femur in a pre-clinical test. In Proceedings of the 12th European Conference on Biomechanics, Dublin, 2000, p. 131.
11. McKellop, H., Ebramzadeh, E. and Niederer, P. G. Comparison of the stability of press-fit hip prosthesis femoral stems using a synthetic model femur. J. Orthop. Res., 1991, 297-305.
12. Tencer, A. F. and Johnson, K. D. Biomechanics in Orthopaedic Trauma, 1994 (Martin Dunitz, London).
13. Maquet, P. G. J. Biomechanics of the Hip, 1985 (Springer-Verlag, Berlin).
14. Smith, S. L., Burgess, I. C. and Unsworth, A. Evaluation of a hip joint simulator. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1999, 213(H6), 469-473.
15. Viceconti, M., Cavallotti, G. and Adrisano, A. O. Discussion on the design of a hip joint simulator. Med. Engng Physics, 1996, 18, 234-240.
16. Smith, S. L. and Unsworth, A. A comparison between gravimetric and volumetric techniques of wear measurement of UHMWPE acetabular cups against zirconia and cobalt chromium-molybdenum femoral heads in a hip simulator. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1999, 213(H6), 475-483.
17. Mejia, L. C. and Brierley, T. J. A Hip Wear Simulator for the Evaluation of Biomaterials in Hip Arthroplasty Components, 1993 (MTS System Corporation, Eden Prairie, Minnesota).
18. Saikko, V., Paavolainen, P., Kleimola, M., et al. Five station hip joint simulator for wear rate studies. Proc. Instn Mech. Engrs. Part H: J. Engineering in Medicine, 1992, 206(H4), 195-200.
19. Tateishi, T., Hyodo, K. and Kondo, K. Simulator test of artificial joints. Mater. Sci. Engng, 1994, C1, 121-125.
20. Freeman, M. A. and Plante-Bordeneuve, P. Early migration and late aseptic failure of proximal femoral prosthesis. J. Bone Jt Surg., 1994, 76, 432-438.
21. Walker, P. S., Mai, S. F. and Cobb, A. G. Prediction of clinical outcome of THR from migration measurements on standard radiographs. J. Bone Jt Surg., 1995, 77-B, 205-714.
22. Johnston, R. C., Fitzgerald, R. H., Harris, W. H., et al. Clinical and radiological evaluation of total hip replacement. A standard system of terminology for reporting results. J. Bone Jt Surg., 1990, 72-A, 161-168.
23. Mow, V. C. and Hayes, W. C. Basic Orthopaedic Biomechanics, 1991 (Raven Press, New York).
24. Saikko, V., Graichen, F. and Rohlmann, A. Hip joint loading during walking and running, measured in two patients. J. Biomechanics, 1993, 26, 969-990.
25. English, T. A. and Kilvington, M. In vivo records of hip loads using a femoral implant with telemetric output. J. Biomed. Engng, 1979, 1(2), 111-115.
26. Crowninshield, R., Johnston, R. C., Andrews, J. G. and Brand, R. A. A biomechanical investigation of the human hip. J. Biomechanics, 1978, 11(2), 75-85.
27. Liu, C. Z. Dynamic simulation of cemented hip replacement integrity: an in vitro study of cemented hip replacement. PhD thesis, University of Newcastle, 2003.
28. Oh, I. and Harris, W. H. Proximal strain distribution in the loaded femur. J. Bone Jt Surg., 1978, 60-A(1), 75-85.
29. Cristofolini, L., Viceconti, M., Cappello, A., et al. Mechanical validation of whole bone composite femur models. J. Biomechanics, 1996, 29(4), 525-535.
30. Brummit, K. and Hardaker, C. S. Estimation of wear in total hip replacement using a ten station hip simulator. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1996, 210(H2), 187-190.
31. Scholes, S. C. and Unsworth, A. Comparison of friction and lubrication of different hip prostheses. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine. 2000, 214(H1). 49-57.
32. ELITE Plus DePuy.
33. Charnley DePuy.
34. Liu, C. Z., Green, S. M., McCaskie, A. W., et al. Some failure modes of four clinical bone cements. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2001, 214(H4), 359-366.
35. Kiss, J., Murray, D. W. and Turnersmith, A. R. Migration of cemented femoral components after THR-Roentgen stereophotogrammetric analysis. J. Bone Jt Surg., 1996, 78-B, 796-801.
36. Loudon, J. R. and Older, M. W. J. Subsidence of the femoral component related to long-term outcome of hip replacement. J. Bone Jt Surg., 1989, 71-B(4), 624-628.
37. Karrholm, J., Borssen, B. and Lowenhielm, G. Does early micromotion of femoral stem prostheses matter? J. Bone Jt Surg., 1994, 76-B, 912-915.
38. Kiss, J., Murray, D. W. and Turner-Smith, A. R. Roentgen stereophotogrammetric analysis for assessing migration of THR femoral components. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 1995, 209(H3), 169-175.
39. Tanner, K. E., Bonfield, W., Dunn, D. and Freeman, M. A. Rotational movement of femoral components of total hip replacements in response to an anteriority applied load. Engng in Medicine, 1988, 17(3), 127-129.
40. Liu, C. Z., Green, S. M., Watkins, N. D., Gregg, P. J. and McCaskie, A. W. The effect of restraint on the creep behaviour of clinical bone cement. J. Mater. Sci, Lett., 2002, 21(12), 959-962.
41. Liu, C. Z., Green, S. M., Watkins, N. D., Gregg, P. J. and McCaskie, A. W. Creep behaviour comparison of CMW1 and Palacos R-40 clinical bone cements. J. Mater. Sci.: Mater. in Medicine, 2002, 13, 1021-1028.
42. Maher, S. A., Prendergast, P. J. and Reid, A. J. Design and validation of a machine for reproducible precision insertion of femoral hip prosthesis for preclinical testing. J. Biomed. Engng, 2000, 122, 203-207.
43. Smith, S. L. and Unsworth, A. Simplified motion and loading compared to physiological motion and loading in a hip joint simulator. Proc. Instn Mech. Engrs, Part H: J. Engineering in Medicine, 2000, 214(H3), 233-238.
44. Liu, C. Z., Green, S. M., Watkins, N. D., Gregg, P. J. and McCaskie, A. W. Migration of a cemented hip joint prosthesis within a novel composite femur. In International Conference of Engineers and Surgeons on Joined at the Hip, London, 2002, paper C601/010.
45. Gheduzzi, S., Hodey, J., Latimer, P., Schmotzer, H. and Miles, A. W. In-vitro migration and micromotion measurements of a cementless hip stem under physiological loading conditions. In International Conference of Engineers and Surgeons on Joined at the Hip, London, 2002. paper C601/031.
46. Maher, S. A., Britton, J. R. and Prendergast, P. J. Preclinical testing of cemented hip prostheses. 2001 (http:// www.mme.tcd.ie/groups/bioengineering/).