Topology and shape optimization of structures using FEM and BEM: A bibliography (1999-2001)

Finite Elements in Analysis and Design

Volumn 39, Issue 3, 2003, Pages 243-253

  Mackerle, Jaroslav ^a  

^a LINKÖPING INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

ALGORITHMS; BIBLIOGRAPHIES; BOUNDARY ELEMENT METHOD; COMPUTER SIMULATION; DYNAMIC LOADS; FINITE ELEMENT METHOD; INVERSE PROBLEMS; OPTIMIZATION; PERTURBATION TECHNIQUES; PROBLEM SOLVING; TOPOLOGY;

DISSERTATIONS;

STRUCTURAL ANALYSIS;

EID: 0037209829     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0168-874X(02)00071-9     Document Type: Short Survey

References (230)

1. Abouchabaka J.et al. Quasi-variational inequality and shape optimization for solution of a free boundary problem. COMPEL. 18(2):1999;143-164.
2. Aboulaich R.et al. Shape optimization of labyrinth seals. Int. J. Appl. Math. Comput. Sci. 10(2):2000;381-404.
3. Akin J.E., Arjona-Baez J. Enhancing structural topology optimization. Eng. Comput. 18(3/4):2001;663-675.
4. Annicchiarico W., Cerrolaza M. Finite elements, genetic algorithms and beta-splines. a combined technique for shape optimization Finite Elem. Anal. Des. 33(2):1999;125-141.
5. Annicchiarico W., Cerrolaza M. Structural shape optimization 3D finite-element models based on genetic algorithms and geometric modeling. Finite Elem. Anal. Des. 37(5):2001;403-415.
6. Babik F.et al. Shaper optimization for producing profiled crystals. Bull. Russian Acad. Sci. Phys. 63(9):1999;1699-1704.
7. Baron P.et al. Voxel-based representation for evolutionary shape optimization. Artif. Intell. Eng. Des. Anal. Manuf. 13(3):1999;145-156.
8. Beckers M. Dual methods for discrete structural optimization problems. Int. J. Numer. Methods Eng. 48(12):2000;1761-1784.
9. Belblidia F.et al. Integrated design optimization of stiffened plate structures. Eng. Comput. 16(8):1999;934-951.
10. Belblidia F.et al. Topology optimization of plate structures using a single- or three-layered artificial material model. Adv. Eng. Software. 32(2):2001;159-168.
11. S. Bentouati, et al., Influence of motor topologies and design parameters on the starting torque of a single-phase PM brushless DC motor, 2000 IEEE INTERMAG Conference, Toronto, IEEE, 2000, p. CR02.
12. Borrvall T., Petersson J. Topology optimization using regularized intermediate density control. Comput. Methods Appl. Mech. Eng. 190(37):2001;4911-4928.
13. Bourdin B. Filters in topology optimization. Int. J. Num. Methods Eng. 50(9):2001;2143-2158.
14. Brisset S., Brochet P. Shape optimisation of BDC wheel motor using Powell's method. COMPEL. 19(2):2000;596-601.
15. I. Bucher, E. Balmes, Shape optimization of vibrating structures, IMAC-XIX, Kissimmee, FL, 2001, pp. 331-334.
16. Bugeda G., Gil L. Shape sensitivity analysis for structural problems with non-linear material behaviour. Int. J. Numer. Methods Eng. 46(9):1999;1385-1404.
17. Bugeda G.et al. Structural shape sensitivity analysis for nonlinear material models with strain softening. Struct. Optim. 17(2/3):1999;162-171.
18. Buhl T.et al. Stiffness design of geometrically nonlinear structures using topology optimization. Struct. Multidisc. Optim. 19(2):2000;93-104.
19. Bulman S., Hinton E. Constrained adaptive topology optimization of engineering structures. Des. Optim. 1(4):1999;419-439.
20. Butenweg C., Thierauf G. Automatic design of reinforced concrete structures with parallel computing. Papadrakakis M. Innovative Computational Methods for Structural Mechanics. 1999;305-318 Saxe-Coburg, Edinburgh.
21. Butt R. Aspects of the optimal shape design problems. J. Vib. Control. 5(3):1999;401-419.
22. Byun J.K.et al. Inverse problem application of topology optimization method with mutual energy concept and design sensitivity. IEEE Trans. Magn. 36(4):2000;1144-1147.
23. Canfield S., Frecker M. Topology optimization of compliant mechanical amplifiers for piezoelectric actuators. Struct. Multidisc. Optim. 20(4):2000;269-279.
24. Cea J.et al. The shape and topological optimizations connection. Comput. Methods Appl. Mech. Eng. 188(4):2000;713-726.
25. B. Ceranic, C. Fryer, An application of a real number micro-genetic algorithm to the shape optimisation of in-plane stressed plate elements, In: B.H.V. Topping (Ed.), Computational Engineering Using Metaphors From Nature, Civil-Comp, Edinburgh, 2000, pp. 121-126.
26. K.H. Chang, P.S. Tang, Integrated approach for topology and shape optimizations of 3-D structural components, 41st Structures, Structural Dynamics and Material Conference and Exhibition, AIAA, 2000, pp. 2185-2195.
27. Chen B.C., Kikuchi N. Topology optimization with design-dependent loads. Finite Elem. Anal. Des. 37(1):2001;57-70.
28. Chen S.et al. Static reanalysis for topological modifications of structures. Acta Mech. Solida Sinica. 12(2):1999;155-164.
29. Chen T.Y., Lin C.Y. Determination of optimum design spaces for topology optimization. Finite Elem. Anal. Des. 36(1):2000;1-16.
30. Chen T.Y., Shieh C.C. Fuzzy multiobjective topology optimization. Comput. Struct. 78(1/3):2000;459-466.
31. 2 continuity functions Comput. Methods Appl. Mech. Eng. 188(4):2000;727-742.
32. Chickermane H.et al. Optimal fastener pattern design considering bearing loads. Struct. Optim. 17(2/3):1999;140-146.
33. Choi B.et al. Shape design optimization of joining mechanism using doubly curved shell. Comput. Struct. 77(5):2000;495-507.
34. Choi K.K., Duan W. Design sensitivity analysis and shape optimization of structural components with hyperelastic material. Comput. Methods Appl. Mech. Eng. 187(1/2):2000;219-243.
35. G.Y. Cui, et al., Topology optimization for maximum natural frequency using simulated annealing and morphological representation, 41st Structures, Structural Dynamics and Material Conference and Exhibition, Atlanta, AIAA, 2000, pp. 470-479.
36. M.J. De Ruiter, F. Van Keulen, Topology optimization: approaching the material distribution problem using a topological function description, In: B.H.V. Topping (Ed.), Computational Techniques for Materials, Composites and Composite Structures, Civil-Comp, Edinburgh, 2000, pp. 111-119.
37. Di Barba P., Savini A. Optimal shape design of an iron-cored electromagnet. a further benchmark problem in magnetostatics Int. J. Appl. Electromagn. Mech. 10(5):1999;371-379.
38. Du H.et al. Topological optimization of mechanical amplifiers for piezoelectric actuators under dynamic motion. Smart Mater. Struct. 9(6):2000;788-800.
39. Falk A.et al. A hierarchical design concept for shape optimization based on the interaction of CAGD and FEM. Struct. Optim. 18(1):1999;12-23.
40. D.W. Fanjoy, W.A. Crossley, Overcoming the obstacles to using a genetic algorithm for topology design of planar cross-sections, 41st Structures, Structural Dynamics and Material Conference and Exhibition, AIAA, 2000, pp. 2166-2174.
41. D.W. Fanjoy, W.A. Crossley, Using a genetic algorithm to design beam cross-sectional topology for bending, torsion, and combined loading, 41st Structures, Structural Dynamics and Material Conference and Exhibition, AIAA, 2000, pp. 1387-1395.
42. Fernandes P.et al. Topology optimization of three-dimensional linear elastic structures with a constraint on perimeter. Comput. Struct. 73(6):1999;583-594.
43. L. Fine, et al., Topological operators to improve finite element analysis geometry adaptation, Fifth International Conference on Computing Structures and Techniques, Civil-Comp, Edinburgh, 2000, pp. 107-117.
44. Fuchs M.B., Moses E. Optimal structural topologies with transmissible loads. Struct. Multidisc. Optim. 19(4):2000;263-273.
45. Fuchs M.B.et al. The Aboudi micromechanical model for topology design of structures. Comput. Struct. 73(1/5):1999;355-362.
46. Gani L., Rajan S.D. Use of fracture mechanics and shape optimization for component designs. AIAA J. 37(2):1999;255-260.
47. Gao Z.Y., Grandhi R.V. Sensitivity analysis and shape optimization for preform design in thermo-mechanical coupled analysis. Int. J. Numer. Methods Eng. 45(10):1999;1349-1373.
48. Givoli D., Demchenko T. A boundary-perturbation finite element approach for shape optimization. Int. J. Numer. Methods Eng. 47(4):2000;801-819.
49. Golay F., Seppecher P. Locking materials and the topology of optimal shapes. Europ. J. Mech., A/Solids. 20(4):2001;631-644.
50. Hammer V.B., Olhoff N. Topology optimization of continuum structures subjected to pressure loading. Struct. Multidisc. Optim. 19(2):2000;85-92.
51. Han S.Y. Shape optimization for general two-dimensional structures. Acta Mech. 145(1/4):2000;117-125.
52. Han S.Y., Maeng J.S. Shape optimization of general structures. Key Eng. Mater. 183-187:2000;361-366.
53. Hansel W., Becker W. Layerwise adaptive topology optimization of laminate structures. Eng. Comput. 16(7):1999;841-851.
54. Hansel W., Becker W. An evolutionary algorithm for a layerwise topology optimization of laminates. Adv. Eng. Mater. 2(7):2000;427-430.
55. Hansen J.S.et al. Shape sensitivity analysis using a fixed basis function finite element approach. Struct. Multidisc. Optim. 21(3):2001;177-195.
56. Hardee E.et al. A CAD-based design parametrization for shape optimization of elastic solids. Adv. Eng. Software. 30(3):1999;185-199.
57. Haslinger J., Kozubek T. A fictitious domain approach for a class of Neumann boundary value problems with applications in shape optimization. East-West J. Num. Math. 8(1):2000;1-23.
58. Heller M.et al. Gradientless finite element procedure for shape optimization. J. Strain Anal. Eng. Des. 34(5):1999;323-336.
59. Herskovits J.et al. Shape structural optimization with an interior point nonlinear programming algorithm. Struct. Multidisc. Optim. 20(2):2000;107-115.
60. Herskovits J.et al. Contact shape optimization. a bilevel programming approach Struct. Multidisc. Optim. 20(3):2000;214-221.
61. Hilding D.et al. Optimization of structures in unilateral contact. Appl. Mech. Rev. 52(4):1999;139-160.
62. Hilding D.et al. A computational methodology for shape optimization of structures in frictionless contact. Comput. Methods Appl. Mech. Eng. 190(31):2001;4043-4060.
63. Holzleitner L., Mahmoud K.G. Structural shape optimization using MSC/NASTRAN and sequential quadratic programming. Comput. Struct. 70(5):1999;487-514.
64. Huang C.et al. Structural modal reanalysis for topological modifications of finite element systems. Eng. Struct. 22(4):2000;304-310.
65. Jakiela M.J.et al. Continuum structural topology design with genetic algorithms. Comput. Methods Appl. Mech. Eng. 186(2/4):2000;339-356.
66. Jo H.H.et al. A study on the optimal tool shape design in a hot forming process. J. Mater. Process. Technol. 111(1/3):2001;127-131.
67. Jo Y.S.et al. An approach for the shape optimum design of superconducting synchronous generator. IEEE Trans. Appl. Supercond. 10(1):2000;939-942.
68. Jog C.S. A robust dual algorithm for topology design of structures in discrete variables. Int. J. Numer. Methods Eng. 50(7):2001;1607-1618.
69. Joo J.et al. Topological synthesis of compliant mechanisms using linear beam elements. Mech. Struct. Mach. 28(4):2000;245-280.
70. S.K. Kassegne, S. Quarshie, Object-oriented interactive optimization tool for analysis and design of plates and shells, Fifth US Nat. Congress on Computational Mechanics, Boulder, 1999, pp. 237-238.
71. Katoozian H., Davy D.T. Effects of loading condition and objective function on three-dimensional shape optimization of femoral components of hip endoprostheses. Med. Eng. Phys. 22(4):2000;243-251.
72. Kaye R., Heller M. Investigation of shape optimization for the design of life extension options for an F/A-18 airframe FS 470 bulkhead. J. Strain Anal. Eng. Des. 35(6):2000;493-505.
73. Kegl M. Shape optimal design of structures. an efficient shape representation concept Int. J. Num. Meth. Eng. 49(12):2000;1571-1588.
74. Kegl M. An efficient shape parametrization concept for structural optimization. Z. Ang. Math. Mech. 81(S3):2001;673-674.
75. Kegl M., Antes H. Optimal design of elastic frames. Z. Ang. Math. Mech. 80(S3):2000;793-794.
76. Kim D.J.et al. Optimization of the irregular shape rolling process with an artificial neural network. J. Mater. Process. Technol. 113(1/3):2001;131-135.
77. Kim H.et al. A method for varying the number of cavities in an optimized topology using evolutionary structural optimization. Struct. Multidisc. Optim. 19(2):2000;140-147.
78. Kim H.et al. Introduction of fixed grid in evolutionary structural optimisation. Eng. Comput. 17(4):2000;427-439.
79. Kim Y.H.et al. Optimal design of superplastic forming processes. J. Mater. Process. Technol. 112(2/3):2001;166-173.
80. P. Kladnik, et al., Shape optimization of the blank sheet for deep drawing of a square cup, Solutions of Production Problems, INFORMATIKA, Ljubljana, 2000, pp. 61-69.
81. Kotera H., Shima S. Shape optimization to perform prescribed air lubrication using genetic algorithm. Tribology Trans. 43(4):2000;837-841.
82. Kowalczyk P., Kleiber M. Shape sensitivity in elasto-plastic computations. Comput. Methods Appl. Mech. Eng. 171(3/4):1999;371-386.
83. Kress G.R. Shape optimization of a flywheel. Struct. Multidisc. Optim. 19(1):2000;74-81.
84. Kutylowski R. About the artificial approach in topology optimization in meaning of the convergence problem. Z. Ang. Math. Mech. 80(S2):2000;535-536.
85. Kutylowski R. On an effective topology procedure. Struct. Multidisc. Optim. 20(1):2000;49-56.
86. Kutylowski R. The epsilon-relaxed approach in topology optimization for various epsilon functions. Z. Ang. Math. Mech. 81(S3):2001;681-682.
87. Lau G.K.et al. Systematic design of displacement-amplifying mechanism for piezoelectric stacked actuators using topology optimization. Proc. SPIE. 3985:2000;583-591.
88. Lau G.K.et al. Systematic design of displacement-amplifying mechanisms for piezoelectric stacked actuators using topology optimization. J. Intell. Mater. Systems Str. 11(9):2000;685-695.
89. Lee H.S.et al. A new spatial regularization scheme for the identification of the geometric shape of an inclusion in a finite body. Int. J. Numer. Methods Eng. 46(7):1999;973-992.
90. Lee S.J., Hinton E. Dangers inherited in shells optimized with linear assumptions. Comput. Struct. 78(1/3):2000;473-486.
91. Lee S.J.et al. Shell topology optimization using the layered artificial material model. Int. J. Numer. Methods Eng. 47(4):2000;843-867.
92. Lee T.H.et al. Topology optimization of the inner reinforcement for an automobile hood using modal design sensitivity analysis. Key Eng. Mater. 183-187:2000;439-444.
93. J.P. Leiva, et al., Modern structural optimization concepts applied to topology optimization, 1999 Structures, Structural Dynamics and Material Conference and Exhibition, St Louis, AIAA, 1999, pp. 1589-1596.
94. Lewis R.W.et al. Casting shape optimisation via process modelling. Mater. Des. 21(4):2000;381-386.
95. Li Q.et al. Shape and topology design for heat conduction by evolutionary structural optimization. Int. J. Heat Mass Transf. 42(17):1999;3361-3371.
96. Li Q.et al. Evolutionary shape optimization for stress minimization. Mech. Res. Commun. 26(6):1999;657-664.
97. Li Q.et al. Stress based optimization of torsional shafts using an evolutionary procedure. Int. J. Solids Struct. 38(32):2001;5661-5677.
98. Li Q.et al. Structural topology design with multiple thermal criteria. Eng. Comput. 17(6):2000;715-734.
99. Li Q.et al. Evolutionary structural optimization for connection topology design of multi-component systems. Eng. Comput. 18(3/4):2001;460-479.
100. Li Q.et al. Thermoelastic topology optimization for problems with varying temperature fields. J. Therm. Stress. 24(4):2001;347-366.
101. Liang Q.Q.et al. Optimal selection of topologies for the minimum-weight design of continuum structures with stress constraints. Proc. Inst. Mech. Engng., Part C. 213(8):1999;755-762.
102. Liang Q.Q.et al. Optimal topology selection of continuum structures with displacement constraints. Comput. Struct. 77(6):2000;635-644.
103. Lin C.Y., Chao L.S. Automated image interpretation for integrated topology and shape optimization. Struct. Multidisc. Optim. 20(2):2000;125-137.
104. Lin C.Y., Chou J.N. A two-stage approach for structural topology optimization. Adv. Eng. Software. 30(4):1999;261-271.
105. Lin Y., Grosh K. Topology optimization of the element connections in transducer arrays. Proc. SPIE. 3984:2000;387-394.
106. Liu J.S.et al. Metamorphic development. a new topology optimization method for continuum structures Struct. Multidisc. Optim. 20(4):2000;288-300.
107. Lindby T., Santos J.L.T. Shape optimization of three-dimensional shell structures with the shape parametrization of a CAD system. Struct. Optim. 18(2/3):1999;126-133.
108. Liu Z.S., Hansen J.S. Exact analytical solutions for frequency sensitivity of flat plates with respect to boundary shape change. Struct. Optim. 18(4):1999;256-263.
109. Lu P.C. Using adjoint variable method in the shape optimization under fatigue life constraints. J. Chinese Soc. Mech. Eng. 20(3):1999;237-245.
110. E. Lund, et al., Shape design optimization of steady fluid-structure interaction problems with large displacements, 42nd Structures, Structural Dynamics and Material Conference and Exhibition, Seattle, 2001, pp. 3241-3251.
111. H. Martikka, Optimum design of heavy machinery beams using shape, material and manufacturing method selections with fuzzy satisfaction goals, Sixth International Conference on Computer Aided Optimization and Design Structures, WIT Press, Southampton, 1999, pp. 119-128.
112. Martikka H. Optimum design of locomotive frames using fuzzy goals and FE methods. Adv. Eng. Software. 31(6):2000;411-415.
113. Maute K.et al. Structural optimization - the interaction between form and mechanics. Z. Ang. Math. Mech. 79(10):1999;651-673.
114. Min S.et al. Optimal topology design of structures under dynamic loads. Struct. Optim. 17(2/3):1999;208-218.
115. Min S.et al. Unified topology design of static and vibrating structures using multiobjective optimization. Comput. Struct. 75(1):2000;93-116.
116. Nakanishi Y. Representation of topology using homology groups and its application to structural optimization (fitness value). JSME Int. J., Ser A. 43(3):2000;234-241.
117. Nakanishi Y. Application of homology theory to topology optimization of three-dimensional structures using genetic algorithm. Comput. Methods Appl. Mech. Eng. 190(29):2001;3849-3863.
118. Navarrina F.et al. High order shape design sensitivity. a unified approach Comput. Methods Appl. Mech. Eng. 188(4):2000;681-696.
119. J.H. Negrao, L.M.C. Simoes, Shape and sizing optimization of box-girder decks of cable-stayed bridges, Sixth International Conference on Computer Aided Optimization and Design Structures, WIT Press, Southampton, 1999, pp. 323-332.
120. Nelli Silva E.C., Kikuchi N. Design of piezocomposite materials and piezoelectric transducers using topology optimization III. Arch. Comput. Meth. Eng. 6(4):1999;305-329.
121. Nelli Silva E.C., Kikuchi N. Design of piezoelectric transducers using topology optimization. Smart Mater. Struct. 8(3):1999;350-364.
122. Nelli Silva E.C.et al. Design of piezocomposite materials and piezoelectric transducers using topology optimization II. Arch. Comput. Methods Eng. 6(3):1999;191-222.
123. Nelli Silva E.C.et al. Design of piezocomposite materials and piezoelectric transducers using topology optimization I. Arch. Comput. Methods Eng. 6(2):1999;117-182.
124. Nishiwaki S.et al. Topological design considering flexibility under periodic loads. Struct. Multidisc. Optim. 19(1):2000;4-16.
125. Nishiwaki S.et al. Optimal structural design considering flexibility. Comput. Methods Appl. Mech. Eng. 190(34):2001;4457-4504.
126. Ohsaki M., Uetani K. Shape-stress trade-off design of membrane structures for specified sequence of boundary shapes. Comput. Methods Appl. Mech. Eng. 182(1/2):2000;73-88.
127. Paczelt I. Iterative methods for solution of contact optimization problems. Arch. Mech. 52(4/5):2000;685-711.
128. Parente E., Vaz L.E. Shape sensitivity analysis of geometrically non-linear structures. Des. Optim. 1(3):1999;305-327.
129. Park Y.H., Choi K.K. Shape design sensitivity analysis of nonlinear 2-D solids with elasto-plastic material. Struct. Optim. 18(4):1999;236-246.
130. Pedersen C.B.W.et al. Topology synthesis of large-displacement compliant mechanisms. Int. J. Numer. Methods Eng. 50(12):2001;2683-2705.
131. Pedersen N.L. Maximization of eigenvalues using topology optimization. Struct. Multidisc. Optim. 20(1):2000;2-11.
132. Pedersen P. On optimal shapes in materials and structures. Struct. Multidisc. Optim. 19(3):2000;169-182.
133. Peichl G.H., Ring W. Asymptotic commutativity of differentiation and discretization in shape optimization. Math. Comput. Model. 29(5):1999;19-37.
134. K. Primoz, et al., Shape optimization of the blank sheet for deep drawing of a square cup, Fifth International Symposium on Operational Research, SOR '99, Slovenia, 1999, pp. 221-226.
135. E. Ramm, et al., Structural optimization including non-linear structural response, Fifth US Nat. Congress on Computational Mechanics, Boulder, 1999, pp. 469-470.
136. Reynolds D.et al. Reverse adaptivity - a new evolutionary tool for structural optimization. Int. J. Numer. Methods Eng. 45(5):1999;529-552.
137. Reynolds D.et al. Evolutionary material translation. a tool for the automatic design of low weight, low stress structures Int. J. Numer. Methods Eng. 50(1):2001;147-167.
138. Rispler Á.R.et al. Shape optimisation of adhesive fillets. Int. J. Adhesion Adhesives. 20(3):2000;221-231.
139. Rodrigues H.et al. A design model to predict optimal two-material composite structures. Struct. Optim. 17(2/3):1999;186-198.
140. Rohan E., Whiteman J.R. Shape optimization of elasto-plastic structures and continua. Comput. Methods Appl. Mech. Eng. 187(1/2):2000;261-288.
141. Rozvany G.I.N. Aims, scope, methods, history and unified terminology of computer-aided topology optimization in structural mechanics. Struct. Multidisc. Optim. 21(2):2001;90-108.
142. J. Ryoo, P. Hajela, Handling variable string lengths in GA based structural topology optimization, 42nd Structures, Structural Mechanics and Material Conference and Exhibition, Seattle, 2001, pp. 3297-3307.
143. C.H. Ryu, et al., Optimized reinforcement shape design around a cutout subject to various load condition, Fifth International Conference on Computer Structures and Techniques, Civil-Comp, Edinburgh, 2000, pp. 153-159.
144. Saxena A., Ananthasuresh G.K. On an optimal property of compliant topologies. Struct. Multidisc. Optim. 19(1):2000;36-49.
145. Saxena A., Ananthasuresh G.K. Topology synthesis of compliant mechanisms for nonlinear force-deflection and curved path specifications. J. Mech. Design, ASME. 123(1):2001;33-42.
146. Schleupen A.et al. Adaptive FE-procedures in shape optimization. Struct. Multidisc. Optim. 19(4):2000;282-302.
147. Schwarz S.et al. Structural optimization in nonlinear mechanics. Z. Ang. Math. Mech. 81(S3):2001;695-696.
148. Shim H.et al. Optimum blank shape design by sensitivity analysis. J. Mater. Process. Technol. 104(3):2000;191-199.
149. Shim P.Y., Manoochehri S. A hybrid deterministic/stochastic optimization approach for the shape configuration design of structures. Struct. Optim. 17(2/3):1999;113-129.
150. Sienz J.et al. Some studies on integrating topology and shape optimization. Papadrakakis M. Innovative Computational Methods for Structural Mechanics. 1999;223-256 Saxe-Coburg, Edinburgh.
151. Sigmund O. A 99 line topology optimization code written in Matlab. Struct. Multidisc. Optim. 21(2):2001;120-127.
152. Sigmund O., Torquato S. Design of smart composite materials using topology optimization. Smart Mater. Struct. 8(3):1999;365-379.
153. Silva C.A.C., Bittencourt M.L. An object-oriented structural optimization program. Struct. Multidisc. Optim. 20(2):2000;154-166.
154. Soize C., Michelucci J.C. Structural shape parametric optimization for an internal structural-acoustic problem. Aerospace Sci. Technol. 4(4):2000;263-275.
155. Song X., Baldwin J.D. A novel node-based structural shape optimization algorithm. Comput. Struct. 70(5):1999;569-581.
156. Srikanth A., Zabaras N. Shape optimization and preform design in metal forming processes. Comput. Methods Appl. Mech. Eng. 190(13):2000;1859-1901.
157. Steven G.et al. Evolutionary structural optimisation (ESO) for combined topology and size optimisation of discrete structures. Comput. Methods Appl. Mech. Eng. 188(4):2000;743-754.
158. G. Steven, et al., Topology and shape structural optimization that minimizes maximum stress and maximizes stiffness, in: B.H.V. Topping (Ed.), Computational Mechanics for the Twenty-First Century, Saxe-Coburg, Edinburgh, 2000, pp. 403-430.
159. Steven G.P.et al. Evolutionary topology and shape design for general physical field problems. Comput. Mechanics. 26(2):2000;129-139.
160. Stockl G. Topology optimization of trusses under stochastic uncertainty. ZAMM. 81(S3):2001;697-698.
161. Stolpe M., Svanberg K. On the trajectories of penalization methods for topology optimization. Struct. Multidisc. Optim. 21(2):2001;128-139.
162. Suryatama D., Bernitsas M.M. Topology and performance redesign of complex structures by large admissible perturbations. Struct. Multidisc. Optim. 20(2):2000;138-153.
163. Suzuki Y.et al. A method for shape and topology optimization of three-dimensional structures by using genetic algorithm (a deterministic approach). J. Jpn. Soc. Simul. Tech. 18(3):1999;195-205.
164. Tai K., Chee T.H. Design of structures and compliant mechanisms by evolutionary optimization of morphological representations of topology. J. Mech. Design, ASME. 122(4):2000;560-566.
165. V. Topa, et al., Optimal pole shape design for the reduction of cogging torque of a SRM motor using the simulated annealing method, Symposium on Power Electronics, Electrical Drivers Automation and Motion, Napoli, 2000, pp. BB1/35.
166. Tran D., Nguyen V. Optimal hole profile in a finite plate under uniaxial stress by finite element simulation of Durelli's photoelastic stress minimization method. Finite Elem. Anal. Des. 32(1):1999;1-20.
167. Vena P.et al. Optimal design of interfaces in a femoral head surface replacement prosthesis considering nonlinear behaviour. Struct. Optim. 18(2/3):1999;162-172.
168. Vinot P.et al. Shape optimization of thin-walled beam-like structures. Thin-Wall. Struct. 39(7):2001;611-630.
169. Vondrak V.et al. Duality based contact shape optimization. ZAMM. 81(S3):2001;703-704.
170. Waldman W.et al. Optimal free-form shapes for shoulder fillets in flat plates under tension and bending. Int. J. Fatigue. 23(6):2001;509-523.
171. Wang S., Kang J. Shape optimization of BLDC motor using 3-D finite element method. IEEE Trans. Magnet. 36(4):2000;1119-1123.
172. B. Wilczynski, Shape optimization to minimize stress concentration in shell structures, Fifth International Conference on Computing Structure Technique, Civil-Comp, Edinburgh, 2000, pp. 119-132.
173. Yin L., Yang W. Topology optimization to prevent tunnel heaves under different stress biaxilities. Int. J. Numer. Anal. Meth. Geomech. 24(9):2000;783-792.
174. Yin L.et al. Tunnel reinforcement via topology optimization. Int. J. Numer. Anal. Meth. Geomech. 24(2):2000;201-213.
175. Yokose Y.et al. Genetic algorithms with assistant chromosomes for inverse shape optimization of electromagnetic devices. IEEE Trans. Magnet. 36(4):2000;1052-1056.
176. J. Yoo, N. Kikuchi, Structural optimization in magnetic fields using the homogenization design method: Maximizing magnetic mean compliance, Fifth US Nat. Congress on Computational Mechanics, Boulder, 1999, pp. 472-473.
177. Yoo J., Kikuchi N. Topology optimization in magnetic fields using the homogenization design method. Int. J. Numer. Methods Eng. 48(10):2000;1463-1479.
178. Younes M., Potiron A. Shape optimization of mechanical structure by an adjoint variables method and genetic algorithm. Comput. Assist. Mech. Eng. Sci. 8(1):2001;45-78.
179. Zhao G.et al. Optimum die shape design in net-shape disk forging process. Chinese J. Mech. Eng. 35(4):1999;81-84.
180. Zhou M.et al. Checkerboard and minimum member size control in topology optimization. Struct. Multidisc. Optim. 21(2):2001;152-158.
181. Zhu L., Boyle J.T. Optimal shapes for axisymmetric pressure vessels. a brief overview J. Press. Vess. Tech., ASME. 122(4):2000;443-449.
182. S.M.B. Afonso, Shape optimization of Mindlin-Reissner shells under static and free vibration conditions, Ph.D. Thesis, University of Wales, Swansea, 1995.
183. Bendsoe M.P. Optimization of Structural Topology, Shape, and Material. 1995;Springer, New York.
184. M.P. Bendsoe, C. MotaSoares (Eds.), Topology Design of Structures, Kluwer, Dordrecht, 1993.
185. P. Convert, Optimisation de formes de coques minces axisymetriques sous specifications industrielles, Application au dimensionnement d'un carter de turbomoteur, Ph.D. Thesis, Universite Paris VI, 1992.
186. M.C. Delfour (Ed.), Shape Optimization and Free Boundaries, NATO ASI Series C, Vol. 380, Kluwer, Dordrecht, 1992.
187. Hassani B., Hinton E. A review of homogenization and topology optimization II. analytical and numerical solution of homogenization equations Comput. Struct. 69(6):1998;719-738.
188. Hinton E., Sienz J. Adaptive Finite Element Analysis and Shape Optimization. 1996;Saxe-Coburg, Edinburgh.
189. Y.T. Hwang, Finite element grid optimization and its application in shape optimal design, Ph.D. Thesis, University of California, Los Angeles, 1991.
190. A.V. Kumar, Shape and topology synthesis of structures using a sequential optimization algorithm, Ph.D. Thesis, MIT, 1993.
191. Kwak B.M. Review on shape optimal design and sensitivity analysis. Proc. Jpn. Soc. Civil Eng. 483:1994;1-16.
192. Kwak B.M. Review on shape optimal design and sensitivity analysis. Struct. Eng./Earthquake Eng. 10(4):1994;159-174.
193. R.R. Mayer, Application of topological optimization techniques to structural crash worthiness, Ph.D. Thesis, The University of Michigan, 1994.
194. I. Murra, Shape optimization for dynamic behaviour of axisymmetric bodies applied to the design of bells, Ph.D. Thesis, University of Waterloo, Canada, 1990.
195. R.A.G. Naqib, Shape optimization of two-dimensional elastic continuum using finite element analysis, Ph.D. Thesis, Georgia Institute of Tech., 1992.
196. G.I.N. Rozvany (Ed.), Shape and Layout Optimization of Structural Systems and Optimality Criteria Methods, CISM Course in Udine 1990, Springer, Berlin, 1992.
197. G.I.N. Rozvany (Ed.), Topology Optimization in Structural Mechanics, Springer, New York, 1997.
198. Seireg A.A., Rodriguez J. Optimizing the Shape of Mechanical Elements and Structures. 1997;Marcel Dekker, NY.
199. J. Sienz, Integrated structural modelling, adaptive analysis and shape optimization, Ph.D. Thesis, University of Wales, Swansea, 1994.
200. Sienz J., Hinton E. Reliable structural optimization with error estimation, adaptivity and robust sensitivity analysis. Comput. Struct. 64(1/4):1997;31-63.
201. Sigmund O., Petersson J. Numerical instabilities in topology optimization. a survey on procedures dealing with checkboards, mesh-dependencies and local minima Struct. Optim. 16(1):1998;68-75.
202. P.H. Soan, Transformation techniques in optimal design problems with application to harbour shapes, Ph.D. Thesis, Council of National Academic Awards, UK, 1990.
203. Sokolowski J., Zolesio J.P. Introduction to Shape Optimization - Shape Sensitivity Analysis, SCM 16. 1992;Springer, Berlin.
204. C. Yang, A functional design model for shape optimization in mechanical design, Ph.D. Thesis, Colorado State University, 1992.
205. K.W. Zumwalt, Integrated structural shape optimization using second-order sensitivity analysis and optimization methods, Ph.D. Thesis, University of Missouri-Columbia, 1992.
206. Abouchabaka J.et al. Shape optimization for a simulation of a semiconductor problem (MESFET). Math. Comp. Simul. 56(1):2001;1-16.
207. Cerrolaza M.et al. Optimization of 2D boundary element models using beta-splines and genetic algorithms. Eng. Anal. Boundary Elem. 24(5):2000;427-440.
208. Engelstad S.P.et al. Stiffener shape design to minimize interior noise. J. Aircraft. 37(1):2000;165-171.
209. Huang C.H., Hsiung T.Y. An inverse design problem of estimating optimal shape of cooling passages in turbine blades. Int. J. Heat Mass Transf. 42(23):1999;4307-4319.
210. Kita E., Tanie H. Topology and shape optimization of continuum structures using GA and BEM. Struct. Optim. 17(2/3):1999;130-139.
211. Leu L.J. Shape optimization by the BEM with a reduced basis reanalysis technique. Struct. Eng. Mech. 8(1):1999;73-84.
212. Lin Y., Grosh K. Topology optimization of the element connection in transducer arrays. Proc. SPIE. 3984:2000;387-394.
213. Phan A.V., Mukherjee S. On design sensitivity analysis in linear elasticity by the boundary contour method. Eng. Anal. Boundary Elem. 23(2):1999;195-199.
214. Phan A.V., Phan T.N. A structural shape optimization system using the two-dimensional boundary contour method. Arch. Appl. Mech. 69(7):1999;481-489.
215. P. Prochazka, Shape optimal design using inverse variational principle, Sixth International Conference on Computer Aided Optim. Design Structures, Southampton, 1999, pp. 3-12.
216. Shi X., Mukherjee S. Shape optimization in three-dimensional linear elasticity by the boundary contour method. Eng. Anal. Boundary Elem. 23(8):1999;627-637.
217. Tai K., Fenner R.T. Optimum shape and topology design using the boundary element method. Int. J. Solids Struct. 36(14):1999;2021-2040.
218. Ye W., Mukherjee S. Optimal shape design of three-dimensional MEMS with applications to electrostatic comb drives. Int. J. Numer. Methods Eng. 45(2):1999;175-194.
219. Zhao Z., Lie S.T. Design sensitivity analysis with hypersingular boundary elements. Eng. Anal. Boundary Elem. 24(6):2000;485-490.
220. R. Aithal, Boundary element formulations for shape design sensitivity analysis of 2D and 3D continua, Ph.D. Thesis, Worcester Polytechnique Institute, 1990.
221. T. Burczynski, Boundary elements in shape sensitivity analysis and optimal design-a survey, Pr. Nauk. Inst. Konstr. Fkspl. Maszyn Polytech. Wroctawskiej 74 (20) (1993) 204.
222. R.M. Dolin, Integrating modeling, analysis, and optimization into a shape variable engineering design process, Ph.D. Thesis, Purdue University, 1990.
223. Z. Erman, Three-dimensional shape optimization using boundary elements, Ph.D. Thesis, Imperial College, London, 1995.
224. K.B. Kumar, Boundary element substructuring and reanalysis techniques for large scale shape optimization, Ph.D. Thesis, Clarkson University, 1992.
225. Kwak B.M. Review on shape optimal design and sensitivity analysis. Proc. Jpn. Soc. Civil Eng. 483:1994;1-16.
226. Kwak B.M. Review on shape optimal design and sensitivity analysis. Struct. Eng./Earthquake Eng. 10(4):1994;159-174.
227. L.J. Leu, Sensitivity analysis and optimization in nonlinear solid mechanics, Ph.D. Thesis, Cornell University, 1994.
228. H. Wang, Boundary formulations for nonlinear design sensitivity analysis, Ph.D. Thesis, Clarkson University, 1993.
229. Z. Zhao, Shape design sensitivity analysis and optimization using the boundary element method, Ph.D. Thesis, Wessex Institute of Technology, UK, 1990.
230. Zhao Z. Shape Design Sensitivity Analysis and Optimization using the Boundary Element Method. 1991;Springer, Berlin.