Sensing and control of aerodynamic separation by mems

Journal of Mechanics

Volumn 16, Issue 1, 2000, Pages 45-52

  Lee, Gwo Bin ^a   Huang, Adam ^b   Ho, Chih Ming ^b   Jiang, Fukang ^c   Grosjean, Charles ^c   Tai, Yu Chong ^c  

^a NATIONAL CHENG KUNG UNIVERSITY   (Taiwan)

^b UNIVERSITY OF CALIFORNIA   (United States)

^c CALIFORNIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Active flow control; MEMS; Micro actuators; Micro shear stress sensors

Indexed keywords

DELTA WING AIRCRAFT; FLOW CONTROL; MICROACTUATORS; MICROSENSORS; SHEAR STRESS;

ACTIVE FLOW CONTROL;

MICROELECTROMECHANICAL DEVICES;

EID: 0034158750     PISSN: 17277191     EISSN: None     Source Type: Journal    
DOI: 10.1017/S1727719100001763     Document Type: Article

References (38)

1. Madou M., Fundamentals of Microfabrication, CRC Press, Boca Raton, Florida (1997).
2. Kovac, G. T. A., Micromachined Transducers Soucebook, McGraw-Hill, New York (1998).
3. Coe, D. J., Allen, M. G., Smith, B. L. and Glezer, A., "Addressable Micromachined Jet Arrays," TRANSDUCERS '95, Stockhom, Sweden (1995).
4. Jacobson, S. A. and Reynolds, W. C., "Active Boundary Layer Control Using Flush Mounted Surface Actuators," Bull. Ann. Phys. Soc., 38(12), p. 2197 (1993).
5. Tsao, T., Liu, C., Tai, Y. C. and Ho, C. M., "Micromachined Magnetic Actuators for Active Fluid Control," Proceedings of ASME Application of Microfabrication to Fluid Mechanics, FED-Vol. 197, pp. 31-38 (1994).
6. Grosjean, C., Lee, G. B., Hong, W., Tai, Y. C., Ho, C. M, "Micro Balloon Actuators for Aerodynamic Control," IEEE MEMS-98 Workshop, German (1998).
7. Smith, B. L. and Glezer, A., "Jet Vectoring by Synthetic Jet Actuators," Bull Am. Phys. Soc. 40, p. 2025 (1995).
8. Gad-el-Hak, M., "Interactive Control of Turbulent Boundary Layers: a Futuristic Overview," AIAA Journal, 32(9), pp.1753-1765 (1994).
9. Ho, C. M. and Tai, Y. C., "Micro-Electro-Mechanical-Systems and Fluid Flows," Annual Review of Fluid Mechanics, 30, pp. 579-612 (1998).
10. Jacobson, S. A. and Reynolds, W. C., "Active Control of Boundary Layer Wall Shear Stress Using Self-Learning Neural Networks," AIAA Paper No. 93-3272 (1993).
11. Tung, S., Hong, W., Ho, C. M., Liu C. and Tai, Y. C., "Control of Streamwise Vortices in 2-D Channel Flows," Proceedings of the 6th Congress of Asian Fluid Mechanics, Singapore, 2, p. 85 (1995).
12. Lee, G. B., Ho, C. M., Jiang, F., Liu, C., Tsao, T. and Tai, Y. C., "Distributed Flow Control by MEMS," Proceedings of the ASME 1996 International Mechanical Engineering Congress and Exposition, Atlanta, Nov. 17-22, pp. 145-150 (1996).
13. Lee, G. B., "Control of a Delta-Wing Aircraft by Using Micromachined Sensors and Actuators," Ph.D. Thesis, Department of Mechanical and Aerospace Engineering, University of California, Los Angeles, U.S.A. (1998).
14. Lee, G. B., Chiang S., Tai, Y. C., Tsao, T. and Ho, C. M., "Robust Vortex Control of a Delta Wing Using Distributed MEMS Actuators," accepted, Journal of Aircraft (2000).
15. Ho, C. M. and Huang, L. S., "Subharmonics and Vortex Merging in Mixing Layers," Journal of Fluid Mechanics, 119, pp. 443-473 (1982).
16. Werle, H., "Flow Visualization Techniques for the Study of High Incidence Aerodynamics," in High Angle-of-Attack Aerodynamics, AGARD/VKI Lecture Series, No. 121, Paper No.3 (1982).
17. Marchman III, J. F., "Effect of Heating on Leading Edge Vortices in Subsonic Flow," Journal of Aircraft, 12(2), pp. 121-123 (1975).
18. Hool, J. H., "Measurement of Skin Friction Using Surface Tubes," Aircraft Eng., 28, p. 52 (1956).
19. East, L. F., "Measurement of Skin Friction at Low Subsonic Speeds by the Razor-Blade Technique," R&M 3525, Aero. Res. Counc., London (1966).
20. Goldstein, R. J., Fluid Mechanics Measurement, Hemisphere Publishing Co., p. 61 (1983).
21. Preston, J. H., "The Determination of Turbulent Skin Friction by Means of Pitot Tubes," J. R. Aero. Soc., 58, pp. 109-121 (1953).
22. Schmidt, M. A., Howe, R. T., Senturia, S. D. and Haritonidis, J. H., "Design and Calibration of a Microfabricated Floating-Element Shear-Stress Sensor," IEEE Trans. Electron Devices, 35, pp. 750-757 (1998).
23. Shajii, J., Ng, K. Y. and Schmidt, M. A., "A Microfabricated Floating-Element Shear Stress Sensor Using Wafer-Bonding Technology," IEEE/ASME J. Microelectromechanicalsystems, 1, pp. 89-94 (1992).
24. Pan, T., Hyman, D., Mehregany, M., Reshotko, E. and Willis, B., "Calibration of Microfabricated Shear Stress Sensor," Digest of Technical Papers, TRANSDUCERS'95, Stockholm, pp. 443-446 (1994).
25. Mehregany, M. and Bang, C. "MEMS for Smart Structures," Proc. Smart Structures and Materials. pp. 105-114 (1995).
26. Padmanabhan, A., Goldberg, H. D., Breuer, K. S. and Schmidt, M. A., "A Silicon Micromachined Floating-Element Shear-Stress Sensor with Optical Position Sensing by Photodiodes," Digest of Technical Papers, TRANSDUCERS'95, Stockholm, pp. 436-439 (1995).
27. Jiang, F., Tai, Y. C., Gupta, B., Goodman, R., Tung, S., Huang, J. B. and Ho, C. M., "Micromachined Shear Stress Sensor Array," Proc. IEEE MEMS-96 Workshop, San Diego, pp. 110-115 (1996).
28. Huang, J. B., Jiang, F. K., Tai, Y. C. and Ho, C. M., "A Micro-Electro-Mechanical-System-Based Thermal Shear Stress Sensor with Self-Frequency Compensation," Meas. Sci. Technol, 10, pp. 687-696 (1999).
29. Jiang, F., Tai, Y. C., Ho, C. M., Karan, R. and Garstenauer, M., "Theoretical and Experimental Studies of Micromachined Hot-Wire Anemometers," Technical Digest, International Electron Devices Meeting, San Francisco, CA, pp. 139-142 (1994).
30. Liu, C., Huang J. B., Zhu, A., Jiang, F., Tung, S., Tai, Y. C. and Ho, C. M., "A Micromachined Flow Shear Stress Sensor Based on Thermal Transfer Principles," IEEE/ASME J. of Microelectro-mechanical Systems (J.MEMS) (1999).
31. Jiang, F., Lee, G. B., Tai, Y. C. and Ho, C. M., "A Flexible Micromachine-Based Shear-stress Sensor Array and Its Application to Separation-Point Detection," Accepted, Sensors and Actuators A: Physical (1999).
32. Liu, C., Tsao, T., Lee, G. B., Leu, T. S., Tai, Y. C. and Ho, C. M., "Out-of-Plane Magnetic Actuators with Electroplated Permalloy for Fluid Dynamics Control," Sensors And Actuators A: Physical, 78, Issue: 2-3, pp. 71-242 (1999).
33. Liu, C., Tsao, T. and Tai, Y. C., "A High-Yield Drying Process for Surface Microstructures Using Active Levitation," 1997 International Conference on Solid-State Sensors and Actuators (Transducers 97), June (1997).
34. Lee, G. B., Tai, Y. C., Grosjean, C. and Ho, C. M., "Application of Micromachined Balloon Actuators on Control of Leading-edge Vortices of a Delta Wing," Proc. 22nd National Conference on Theoretical and Applied Mechanics, Taiwan, ROC (1998).
35. Polhamus, E. C., "Predictions of Vortex-Lift Characteristics by a Leading-Edge Suction Analogy," Journal of Aircraft, 8(4), pp. 193-199 (1971).
36. Liu, C., Tsao, T., Tai, Y. C., Leu T. -S., Ho, C. -M., Tang, W. and Miu, D., "Micromachined Permalloy Magnetic Actuator for Delta-Wing Control," Proceedings from IEEE Micro Electro Mechanical Systems, Germany, pp. 332-335 (1995).
37. Ho, C. M., Huang, P. H., Lew, J., Mai, J. D., Lee, G. B. and Tai, Y. C., "Intelligent System Capable of Sensing-Computing-Actuating," Keynote Address, 4th International Conference on Intelligent Materials, Society of Non-Traditional Technology, Tokyo, Japan (1998).
38. Ho, C. M., Huang, P. H., Yang, J. M., Lee, G. B. and Tai, Y. C., "Active Flow Control by MicroSystems," FLOWCON, International Union of Theoretical and Applied Mechanics (IUTAM) Symposium on Mechanics of Passive and Active Flow Control, Gottingen, Germany, pp. 18-19 (1998).