ULTRASONIC TREATMENT OF LIGHT ALLOY MELTS, Second Edition

Ultrasonic Treatment of Light Alloy Melts, Second Edition

Volumn , Issue , 2014, Pages 1-328

  Eskin, Georgy I ^a   Eskin, Dmitry G ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85131977726     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1201/b17270     Document Type: Book

References (498)

1. Joule, J. 1842. Annals of Electricity, Magnetism, and Chemistry 8:219–24.
2. Curie, J., and P. Curie. 1880. Bulletin de la Société minérologique de France 3:90–93.
3. Rayleigh, Lord. 1917. Phil. Mag. 34:94–98.
4. Altberg, W.J. 1903. Zh. Rus. Fiz. Khim. Obshch. 34:459–60.
5. Frenkel Ya I. 1945. Kinetic theory of liquids. Moscow: Izd. Akad Nauk SSSR [Translated to English. 1955. New York: Dover].
6. Harvey, E.N., D.K. Barnes, W.D. McElroy, A.H. Whiteley, D.C. Pease, and K.W. Cooper. 1944. J. Cell. Comp. Physiol. 24:1–34.
7. Nolting, B.E., and E.A. Neppiras. 1950. Proc. Royal Soc. London 63B:674–85.
8. Kikuchi, Y., and H. Shimizu. 1959. J. Acoust. Soc. Am. 31:1385–86.
9. Rozenberg, L.D., and M.G. Sirotyuk. 1960. Akust. Zh. 6:478–81.
10. Wood, R.W., and A.L. Loomis. 1927. Phil. Mag. 4:417–25.
11. Knapp, R.T., and A. Hollander. 1948. Trans. ASME 70:419–35.
12. Ellis, A.T. 1956. Cavitation in hydrodynamics, paper 8. In Proc. Nat. Phys. Lab. Symp. London: Her Majesty’s Stationery Office.
13. Ellis, A.T., and M.E. Fourney. 1963. Proc. IEEE 51:942–43.
14. Knapp, R.T. 1955. Trans. ASME 77:1045–54.
15. Schmid, J. 1959. Acustica 9:321–26.
16. Sirotyuk, M.G. 1962. Akust. Zh. 8:216–19.
17. Chernov, D.K. 1879. Zapiski Imperat. Russ. Teckhnich. Obshch., no. 1:1–24.
18. Balandin, G.F. 1973. Formation of crystal structure in castings, 192–261. Moscow: Mashinostroenie.
19. Campbell, J. 1981. Int. Met. Rev., no. 2:71–108.
20. Southin, R.T. 1966. J. Inst. Met. 94:401–7.
21. Bondarev, B.I. 1973. Melting and casting of wrought magnesium alloys, 214–23. Moscow: Metallurgiya.
22. Vives, Ch. 1989. Metall. Mater. Trans. B 20B:623–29.
23. Vives, Ch. 1993. Mater. Sci. Eng. A 173:169–72.
24. Zuo, Y., H. Nagaumi, and J. Cui. 2008. J. Mater. Process. Technol. 197:109–15.
25. Zuo, Y., J. Cui, Z. Zhao, H. Zhang, L. Li, and Q. Zhu. 2012. J. Mater. Sci. 47:5501–8.
26. Dobatkin, V.I. 1960. Ingots of aluminum alloys, 56–60; 90–108. Sverdlovsk: Metallurgizdat.
27. Hiedemann, E.A. 1954. J. Acoust. Soc. Am. 26:831–42.
28. Eskin, G.I. 1961. Ultrasound in metallurgy. Moscow: Metallurgizdat.
29. Eskin, G.I. 1965. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
30. Flynn, H.G. 1964. Physics of acoustic cavitation in liquids. In Physical acoustics, vol.1, part B, ed. W.P. Mason, 57–172. New York: Academic Press.
31. von Seemann, H.J., H. Staats, and K.G. Pretor. 1967. Arch. Eisenhüttenwesen 38:257–65.
32. Abramov, O.V., and I.I. Teumin. 1970. Crystallization of metals. In Physical principles of ultrasonic technology, ed. L.D. Rozenberg, 427–514. Moscow: Nauka [Translated to English. 1973. New York: Plenum].
33. Kapustina, O.A. 1970. Degassing of liquids. In Physical principles of ultrasonic technology, ed. L.D. Rozenberg, 253–336. Moscow: Nauka [Translated to English. 1973. New York: Plenum].
34. Abramov, O.V. 1972. Crystallization of metals in an ultrasonic field. Moscow: Metallurgiya.
35. Buxmann, K. 1972. Z. Metallkde. 68:516–21.
36. Jackson, K.A., and J.D. Hunt. 1965. Acta Metall. 13:1212–15.
37. Kapustin, A.P. 1962. Effect of ultrasound on the kinetics of crystallization. Moscow: Nauka.
38. Sokolov, S.Ya. 1935. Acta Physicochim. URSS 3:939–44
39. Sokolov, S.Ya. 1936. Zh. Tekhn. Fiz., no. 3:81–85.
40. von Seemann, H.J. 1936. Metallwirtschaft 15:1067–69.
41. von Seemann, H.J., and H. Menzel. 1947. Metall. 1:39–46.
42. Schmid, G., and L. Ehret. 1937. Z. Electrochem. 43:869–74.
43. Schmid, G., and A. Roll. 1939. Z. Electrochem. 45:769–75.
44. Berlaga, R.Ya. 1939. Zh. Eksperim. Teor. Fiz. 9:1397–98.
45. Danilov, V.I., E.E. Pluzhnik, and B.M. Teverovsky. 1939. Zh. Experim. Teor. Fiz. 9:66–71.
46. Danilov, V.I., and B.M. Teverovsky. 1940. Zh. Eksperim. Teor. Fiz. 10:1305–10.
47. Altberg, V.J., and V. Lavrov. 1939. Acta Physicochem. USSR 11:287–90.
48. Kapustin, A.P. 1950. Izv. Akad. Nauk SSSR 14:357–65.
49. Hunt, J.D., and K.A. Jackson. 1966. J. Appl. Phys. 31:254–57.
50. Frawley, J.J., and W.J. Childs. 1968. Trans. Metall. Soc. AIME 242:256–63.
51. Bradfield, G. 1950. Proc. Phys. Soc. B 63 (5): 305–21.
52. Chukhrov, M.V., S.I. Borovikova, and A.I. Sokolova. 1963. Research in alloys of nonferrous metals. Issue 4, 141–56. Moscow: Izd. Akad. Nauk SSSR.
53. Ansyutina, A.E., I.I. Gur’ev, and G.I. Eskin. 1970. Izv. Akad. Nauk SSSR, no. 4:76–81.
54. von Seemann, H.J., and F. Wehner. 1973. Metallwissehschaft und Technik 27:971–77.
55. Lane, D.H., J.W. Cunningham, and W.A. Tiller. 1960. Trans. Metal. Soc. AIME 218:985–90.
56. Benua, F.F., I.V. Vologdin, and A.I. Katler. 1958. Svarochn. Proizvod., no. 5:1–5.
57. Krüger, F. 1931. German patent no. 604486. Glastech. Ber. 1938 (7): 233–36.
58. Esmarch, W., T. Rommel, and K. Benther. 1940. Werkstof Sonderheft, 78–87. Berlin: W.V. Siemens Werke.
59. Lindström, O. 1955. J. Acoust. Soc. Am. 27:654–71.
60. Masing, G., and G. Ritzau. 1936. Z. Metallkde. 28:293–97.
61. Becker, V. 1941. Novosti Tekhniki 10 (4): 25–26.
62. Pogodin-Alekseev, G.I., and V.V. Zaboleev-Zotov. 1958. Litein. Proizvod., no. 7:35–36.
63. von Seemann, H.J., and H. Staats. 1968. Z. Metallde. 59:347–56.
64. Crawford, A.E. 1955. Ultrasonic engineering with particular reference to high power applications. London: Butterworths.
65. Blitz, J. 1963. Fundamentals of ultrasonics. London: Butterworths.
66. Frederick, J.R. 1965. Ultrasonic engineering. New York: John Wiley & Sons.
67. Eskin, G.I., V.I. Slotin, and S.Sh. Katsman. 1967. Precision casting of parts for aviation assemblies from aluminum alloys, 56–76. Moscow: Mashinostroenie.
68. Herrmann, E. 1958. Handbuch des Stranggiessens. Dusseldorf, Germany: Aluminium Verlag.
69. Vogel, F. 1948. Metall. 2:229–30.
70. Seemann, H., and H. Staats. 1955. German patent 933779, Oct. 1955 (application Feb. 1952).
71. Seemann, H., and H. Staats. 1957. German patent 957533, Jan. 1957 (application Feb. 1953).
72. Blitz, J. 1963. Fundamentals of ultrasonics. London: Butterworths.
73. Rozenberg, L.D. (ed.). 1968. High-intensity ultrasonic fields. Moscow: Nauka [Translated to English. 1971. New York: Plenum].
74. Flynn, H.G. 1964. Physics of acoustic cavitation in liquids. In Physical acoustics, vol. 1, part B, ed. W.P. Mason, 57–172. New York: Academic Press.
75. Suslick, K.S. 1988. Ultrasound: Its chemical, physical and biological effects. New York: VCH Publishers.
76. Mason, T.J., and J.P. Lorimer. 1988. Sonochemistry: Theory, application and uses of ultrasound in chemistry. Chichester, UK: Ellis Horwood.
77. Brennen, C.E. 1995. Cavitation and bubble dynamics. Oxford, UK: Oxford University Press.
78. Ensminger, D., and F.B. Stulen (ed.). 2008. Ultrasonics: Data, equations and their practical uses. Boca Raton, FL: CRC Press.
79. Ensminger, D., and L.J. Bond. 2011. Ultrasonics: Fundamentals, technologies, and applications. 3rd ed. Boca Raton, FL: CRC Press.
80. Efimov, V.A. 1983. In Influence of external action on liquid and solidifying metal, 3–21. Kiev, Ukraine: Institute of Casting Problems, Akad. Nauk UkrSSR.
81. Kapustin, A.P. 1962. Effect of ultrasound on the kinetics of crystallization. Moscow: Nauka.
82. Walker, J.L. 1958. In Proc. ASM Seminar Liquid Metals and Solidification, 319–36. Metals Park, OH: ASM Publication.
83. Chalmers, B. 1964. Principles of solidification. New York: John Wiley & Sons.
84. Hunt, J.D., and K.A. Jackson. 1966. J. Appl. Phys. 37:254–57.
85. Frawley, J.J., and W.J. Childs. 1968. Trans. Met. Soc AIME 242:256–63.
86. Danilov, V.I. 1956. Constitution and crystallization of liquids. Kiev, Ukraine: Izd. Akad. Nauk SSSR.
87. Danilov, V.I., and V.E. Neimark. 1949. Zh. Eksper. Teor. Fiz. 19:235–41.
88. Danilov, V.I., and D.E. Ovsienko. 1951. Zh. Eksper. Teor. Fiz. 21:879–87.
89. Kazachkovsky, O.D. 1948. In Collective papers of the laboratory of metals physics, ed. V.I. Danilov, 103–12. Kiev, Ukraine: Izd. Akad. Nauk UkrSSR.
90. Chvorinov, N.I. 1954. Crystallization and non-homogeneity of steel. Prague, Czech Republic: Publishing House of Czechoslovak Academy of Sciences (NČSAV).
91. Balandin, G.F. 1973. Formation of crystalline structure of castings. Moscow: Mashinostroenie.
92. Flemings, M.C. 1974. Solidification processing. New York: McGraw-Hill.
93. Campbell, J. 1981. Int. Met. Rev., no. 2:71–108.
94. Abramov, O.V. 1972. Crystallization of metals in an ultrasonic field. Moscow: Metallurgiya.
95. Vogel, A., R.D. Doherty, and B. Cantor. 1979. In Solidification and casting of metals, 518–25. London: TMS.
96. Pilling, J., and A. Hellawell. 1996. Metall. Mater. Trans. A 27A:229–32.
97. Jackson, K.A., J.D. Hunt, D.R Uhlmann, and T.P. Seward. 1966. Trans. Metall. Soc. AIME 236:149–60.
98. Chernov, A.A. 1956. Kristallografiya 1:589–93.
99. Kattamis, T.Z., J.C. Coughlin, and M.C. Flemings. 1967. Trans. Metall. Soc. AIME 239:1504–11.
100. Ruvalcaba, D., R.H. Mathiesen, D.G. Eskin, L. Arnberg, and L. Katgerman. 2007. Acta Mater. 55:4287–92.
101. Abramov, O.V., and I.I. Teumin. 1970. Crystallization of metals. In Physical principles of ultrasonic technology, ed. L.D. Rozenberg, 427–514. Moscow: Nauka [Translated to English. 1973. New York: Plenum].
102. Swallowe, G.M., J.E. Field, C.S. Rees, and A. Duckworth. 1989. Acta Mater. 37:961–67.
103. Shu, D., B. Sun, J. Mi, and P.S. Grant. 2012. Metall. Mater. Trans. A 43A:3755–66.
104. Kikuchi, Y. 1969. Ultrasonic transducers. Tokyo: Corona Publ.
105. Eskin, G.I. 1988. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
106. Matauschek, J. 1962. Einführung in die Ultraschalltechnik. Berlin: VEB Verlag Technik.
107. Kleppa, O.J. 1950. J. Chem. Phys. 18:1331–36.
108. Blairs, S. 2007. Phys. Chem. Liquids 45 (4): 399–407.
109. Denisov, V.M., V.V. Pingin, L.T. Antonova, S.A. Istomin, E.A. Pastukhov, and V.I. Ivanov. 2005. Aluminum and its alloys in the liquid state, 7–23. Yekaterinburg, Russia: Izd. Ural Otdel. Ross. Akad. Nauk.
110. Battezzati, L., and A.L. Greer. 1989. Acta Metall. 37:1791–1802.
111. Komarov, S., K. Oda, Y. Ishiwata, and N. Dezhkunov. 2012. Ultrason. Sonochem. 20:754–61.
112. Bergmann, L. 1954. Der Ultraschall und seine Anwendung in Wissenschaft und Technik. 6th ed. Zürich: S. Hirzel Verlag.
113. Lauterborn, W., T. Kurz, R. Mettin, and C.D. Ohl. 1999. Adv. Chem. Phys. 110:295–380.
114. Zeldovich, Ya.B. 1942. Zh. Eksper. Teor. Fiz. 12:525–38.
115. Briggs, H.B., J.B. Johnson, and W.P. Mason. 1947. J. Acoust. Soc. Am. 19:664–77.
116. Connolly, W., and F.E. Fox. 1954. J. Acoust. Soc. Am. 26:843–48.
117. Plesset, M.S., and A. Prosperetti. 1977. Ann. Rev. Fluid Mech. 9:145–85.
118. Khismatullin, D.B. 2004. J. Acoust. Soc. Am. 116:1463–73.
119. Il’ichev, V.I. 1969. In Proc. Akust. Inst. Akad. Nauk SSSR (AKIN) 6:16–29.
120. Belova, V., D.A. Gorin, D.G. Shchukin, and H. Möhwald. 2010. Angew. Chem. Inter. Edn. 49:7129–33.
121. Frenkel, Ya.I. 1945. Kinetic theory of liquids. Moscow: Izd. Akad Nauk SSSR [Translated to English. 1955. New York: Dover Publ.].
122. Harvey, E.N., D.K. Barnes, W.D. McElroy, A.H. Whiteley, D.C. Pease, and K.W. Cooper. 1944. J. Cell. Comp. Physiol. 24:1–34.
123. Harvey, E.N., W.D. McElroy, and A.H. Whiteley. 1947. J. Appl. Phys. 18:162–72.
124. Dobatkin, V.I., R.M. Gabidullin, B.A. Kolachev, and G.S. Makarov. 1976. Gases and oxides in wrought aluminum alloys, 65–90. Moscow: Metallurgiya.
125. Nolting, K.B.E., and E.A. Neppiras. 1950. Proc. Phys. Soc. London. Sect. B 63:647–85; 64:1032–38.
126. Eskin, G.I., P.N. Shvetsov, and A.I. Ioffe. 1972. Izv. Akad. Nauk SSSR, Met., no. 6:69–74.
127. Minnaert, M. 1933. Philos. Mag. 16:235–48.
128. Schmid, J. 1959. Acustica 9:321–26.
129. Eskin, G.I., A.I. Ioffe, and P.N. Shvetsov. 1974. Tekhnol. Legk. Spl., no. 1:8–11.
130. Boguslavsky, Yu.Ya. 1967. Akust. Zh. 13:23–27.
131. Fyrillas, M.M., and A.J. Szeri. 1994/1995. J. Fluid. Mech. 277:381–407; 289:295–314.
132. Crum, L.A. 1980. J. Acoust. Soc. Am. 68:203–11.
133. Pimenov, Yu.P., and A.I. Demenkov. 1972. Tekhnol. Legk. Spl., no. 6:33–36.
134. Abramov, O.V., and Yu.S. Astashkin. 1974. In Application of new physical methods for intensification of metallurgical processes, 155–67. Moscow: Metallurgiya.
135. Eskin, G.I. 1965. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
136. Dubus, B., C. Vanhille, C. Campos-Pozuelo, and C. Granger. 2010. Ultrason. Sonochem. 17:810–18.
137. Moussatov, A., C. Granger, and B. Dubus. 2003. Ultrason. Sonochem. 10:191–195.
138. Dahlem, O., J. Reisse, and V. Halloin. 1999. Chem. Eng. Sci. 54:2829–38.
139. Kumar, A., A.B. Pandit, and J.B. Joshi. 2006. Chem. Eng. Sci. 61:7410–20.
140. Yisaf, T.F., and D.R. Buttsworth. 2007. Ultrason. Sonochem. 14:266–74.
141. Schenker, M.C., M.J.B.M. Pourquié, D.G. Eskin, and B.J. Boersma. 2013. Ultason. Sonochem. 20:502–9.
142. Panov, A.P. 1984. Ultrasonic cleaning of high-precision parts. Moscow: Mashinostroeniye.
143. Kanthale, P.M., P.R. Gogatem, A.B. Pandit, and A.M. Wilhelm. 2003. Ultrason. Sonochem. 10:331–35.
144. Ishiwata, Y., S. Komarov, and Y. Takeda. 2012. In Proc. 13th Intern. Conf. Alum. Alloys (ICAA13), ed. H. Weiland, A.D. Rollett, and W.A. Cassada, 183–87. Warrendale, PA: TMS.
145. Abramov, O.V., Yu.S. Astashkin, and V.S. Stepanov. 1979. Akust. Zh. 35:180–86.
146. Jackson, K.A., and J.D. Hunt. 1965. Acta Metall. 13:1212–15.
147. Teumin, I.I. 1962. Akust. Zh. 8:372–73.
148. Matsunaga, T., K. Ogata, T. Hatayama, K. Shinozaki, and M. Yoshida. 2007. Composites: Part A 38:771–78.
149. Altman, M.B. 1965. Nonmetallic inclusions in aluminum alloys. Moscow: Metallurgiya.
150. Arbuzova, L.A., K.I. Slovetskaya, A.M. Rubinshtein, L.L. Kunin, and V.A. Danilkin. 1971. Izv. Akad. Nauk SSSR, Khimiya, no. 1:169–70.
151. Dulski, T.R. 1996. A manual for the chemical analysis of metals. ASTM Manual Series, vol. 25, 89–90. West Conshohocken, PA: ASTM.
152. Frenzel, H., and H. Schultes. 1934. Z. Phys. Chem. B27:421–24.
153. Suslick, K.S., and E.B. Flint. 1987. Nature 330:553–55.
154. Flannigan, D.J., and K.S. Suslick. 2005. Nature 434:52–55.
155. Crum, L.A. 1995. Ultrason. Sonochem. 2:148–52.
156. Matula, T.J., and L.A. Crum. 1998. Phys. Rev. Lett. 80:865–68.
157. Margulis, M.A. 1995. Sonoluminescence and cavitation. Amsterdam: Gordon and Breach OPA.
158. Brenner, M.P., S. Hilgenfeldt, and D. Lohse. 2002. Rev. Mod. Phys. 74:425–84.
159. Suslick, K.S. 1990. Science 247:1439–45.
160. Kim, K.Y., K.-T. Byun, and H.-Y. Kwak. 2007. Chem. Eng. J. 132:125–35.
161. Margulis, M.A., L.M. Grundel, G.I. Eskin, and P.N. Shvetsov. 1987. Dokl. Akad. Nauk SSSR 295:1170–73.
162. Brodova, I.G., P.S. Popel, and G.I. Eskin. 2002. Liquid metals processing: Application to aluminum alloy production. London: Taylor and Francis.
163. Popel, P.S., V.A. Pavlov, and G.E. Konovalov. 1985. Tsvetn. Met., no. 7:68–70.
164. Boyle, R. W. 1922. Trans. Royal Soc. Canada, 3rd Series 16:157–62.
165. Sörensen, Ch. 1936. Ann. Phys. 418:121–37.
166. Krüger, F. 1938. German patent no. 604486, 1931; Glastech. Ber., no. 7:233–36.
167. Bradfield, G. 1950. Proc. Phys. Soc. B 63 (5): 305–21.
168. Eisenreich, H. 1950. Die Technik 5:310–15.
169. Sergeev, S.V. 1952. Physical and chemical properties of liquid metals. Moscow: Oborongiz.
170. Altman, M.B., D.V. Vinogradova, V.I. Slotin, and G.I. Eskin. 1958. Izv. Akad. Nauk SSSR, Otd. Tekhn. Nauk, no. 9:25–30.
171. Xu, H., T.T. Meek, and Q. Han. 2007. Mater. Lett. 61:1246–50.
172. Xu, H., Q. Han, and T.T. Meek. 2008. Mater. Sci. Eng. A 473:96–104.
173. Puga, H., J. Barbosa, E. Seabra, S. Ribeiro, and M. Prokic. 2009. In Fourth Intern. Conf. on Advances and Trends in Engineering Materials and Their Applications, AES—ATEMA’2009. Hamburg, Ottawa: AES-Advanced Engineering Solutions (ISBN 0-9780479).
174. Haghayeghi, R., H. Bahai, and P. Kapranos. 2012. Mater. Lett. 82:230–32.
175. Kapustina, O.A. 1970. Degassing of liquids. In Physical principles of ultrasonic technology, ed. L.D. Rozenberg, 253–336. Moscow: Nauka [Translated to English. 1973. New York: Plenum].
176. Eskin, G.I. 1988. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
177. Arbuzova, L.A., K.I. Slovetskaya, A.M. Rubinshtein, L.L. Kunin, and V.A. Danilkin. 1971. Izv. Akad. Nauk SSSR, Khimiya, no. 1:169–70.
178. Makarov, G.S. 1983. Cleaning of aluminum alloys by gases. Moscow: Metallurgiya.
179. Dobatkin, V.I., R.M. Gabidullin, B.A. Kolachev, and G.S. Makarov. 1976. Gases and oxides in wrought aluminum alloys, 65–90. Moscow: Metallurgiya.
180. Kelton, K.F., and A.L. Greer. 2010. Nucleation in condensed matter: Application in materials and biology, 165–97. Oxford: Pergamon Press.
181. Makarov, G.S. 2011. Billets of aluminum alloys with magnesium and silicon for extrusion. Moscow: Intermet Engineering.
182. Pimenov, Yu.P., and A.I. Demenkov. 1972. Tekhnol. Legk. Spl., no. 6:33–36.
183. Kunin, L.L., Yu.P. Pimenov, L.A. Arbuzova, and V.A. Danilkin. 1971. Physical chemistry of surface phenomena in melts, 99–103. Kiev, Ukraine: Naukova Dumka.
184. Rozenberg, L.D. (ed.). 1968. High-intensity ultrasonic fields. Moscow: Nauka [Translated to English. 1971. New York: Plenum].
185. Campbell, J. 1993. Castings. 2nd rev. ed. Oxford, UK: Butterworth-Heinemann.
186. Waite, P.D. 1998. Light metals 1998, ed. B. Welch, 791–96. Warrendale, PA: TMS.
187. Opie, W.R., and N.J. Grant. 1950. Trans. AIME 188:1237–41.
188. Alba-Baena, N., and D.G. Eskin. 2013. Light metals 2013, ed. B. Sadler, 958–62. Warrendale, PA: TMS/Wiley.
189. Anyalebechi, P.N. 2003. Light metals 2003, ed. P.N. Crepeau, 857–72. Warrendale, PA: TMS.
190. Altman, M.B., E.B. Glotov, R.M. Ryabinina, and T.I. Smirnova. 1970. Purification of aluminum alloys in vacuum. Moscow: Metallurgiya.
191. Zhang, L. 1996. A kinetic study of hydrogen absorption and degassing behaviour of DURALCAN composites. MSc thesis, University of Quebec at Chicoutimi.
192. Eskin, G.I. 1965. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
193. Chernyshev, I.A. 1953. Lit. Proizvod., no. 10:13–18.
194. Boguslavsky, Yu.Ya. 1967. Akust. Zh. 13:23–27.
195. Lindström, O. 1955. J. Acoust. Soc. Am. 27:654–71.
196. Eskin, G.I. 1998. Ultrasonic treatment of light alloy melts. Amsterdam: Gordon and Breach OPA.
197. Eskin, G.I. 1968. Ultrasonic degassing of molten metal. Moscow: Mashinostronie.
198. Sirotyuk, M.G. 1967. Akust. Zh. 13:265–69.
199. Meek, T.T., Q. Han, and H. Xu. 2006. Degassing of aluminum alloys using ultrasonic vibrations. Report ORNL/TM-2006/61. U.S. Department of Energy.
200. Puga, H., J. Barbosa, E. Seabra, S. Ribeiro, and M. Prokic. 2009. Mater. Lett. 63:806–8.
201. Li, J., T. Momono, Y. Tayu, and Y. Fu. 2008. Mater. Lett. 62:4152–54.
202. Puga, H., J. Barbosa, J. Gabriel, E. Seabra, S. Ribeiro, and M. Prokic. 2011. J. Mater. Process. Technol. 211:1026–33.
203. Korolkov, A.M. 1960. Casting properties of metals and alloys. Moscow: Izd. Akad. Nauk SSSR.
204. Pabel, T., and H.N. Villa Sierra. 2013. Report D6.2, FP7 Project Ultragassing, Grant Agreement No. 286344.
205. Han, Q., H. Xu, and T.T. Meek. 2010. Degassing of molten alloys with the assistance of ultrasonic vibration. U.S. patent 7682556 B2, 23.03.2010.
206. Herrmann, E., and D. Hoffmann. 1980. Handbook on continuous casting. Dusseldorf, Germany: Aluminium Verlag.
207. Livanov, V.A., G.I. Eskin, and N.A. Genisaretsky. 1968. Tsvetn. Met., no. 6:82–84.
208. Eskin, G.I., and P.N. Shvetsov. 1977. In Metals science and casting of light alloys, 8–17. Moscow: Metallurgiya.
209. Gur’ev, I.I., G.I. Eskin, and A.E. Ansyutina. 1978. In Magnesium alloys, 136–40. Moscow: Nauka.
210. Zhang, L. 2013. Ultrasonic processing of aluminum alloys. PhD thesis, Delft, Delft University of Technology.
211. Hitchcock, S.J., N.T. Carroll, and M.G. Nicholas. 1981. J. Mater. Sci. 16:714–32.
212. Li, Y.L., and T.G. Zhou. 2013. Metall. Mater. Trans. A 44:3337–43.
213. Naidich, Ju.V. 1981. Progr. Surf. Membr. Sci. 14:353–484.
214. Mortensen, A., and I. Jin. 1992. Int. Mater. Rev. 37:101–28.
215. Polacovic, A., P. Sebo, J. Ivan, and Z. Augustinicova. 1978. Ultrasonics 16:210–12.
216. Abramov, O.V. 1998. High-intensity ultrasonics. Theory and industrial applications, 291–313. Amsterdam: OPA Gordon and Breach.
217. Eustathopoulos, N., M.G. Nicholas, and B. Drevet. 1999. Wettability at high temperatures, 48–51. Amsterdam: Pergamon/Elsevier.
218. Konovalov, E.G., and I.K. Germanovich. 1962. Dokl. Akad. Nauk Belorus. SSR 6 (8): 492–93.
219. Prokhorenko, P.P., N.V. Dezhkunov, and G.E. Konovalov. 1981. Ultrasonic capillary effect. Minsk: Nauka i Tekhnika.
220. Kitaigorodsky, Yu.I., and V.I. Drozhalova. 1977. Application of ultrasound in metallurgy, Trans. Moscow Inst. Steel and Alloys, no. 90:12–16.
221. Malykh, N.V., and V.M. Petrov. 2003. In Proc. XIII Session Rus. Acoust. Soc., 41–44. Moscow: Russian Acoustical Society.
222. Jaradeh, M.M., and T. Carlberg. 2012. Metall. Mater. Trans. B 43:82–91.
223. Makarov, G.S. 1983. Cleaning of aluminum alloys by gases. Moscow: Metallurgiya.
224. Campbell, J. 2006. Metall. Mater. Trans. B 37:857–63.
225. Lalpoor, M., D.G. Eskin, D. Ruvalcaba, H.G. Fjær, A. Ten Cate, N. Ontijt, and L. Katgerman. 2011. Mater. Sci. Eng. A 528:2831–42.
226. Davis, J.R. (ed.). 1993. Aluminum and aluminum alloys: ASM specialty handbook, 213–18. Materials Park, OH: ASM International.
227. Makarov, G.S., Yu.P. Pimenov, and G.I. Eskin. 1995. In: Metals science, casting and processing or alloys, 187–201. Moscow: VILS.
228. Apelian, D., and R. Mutharasan. 1980. JOM 32 (9): 14–20.
229. Makarov, G.S., P.E. Khodakov, G.A. Valova et al. 1977. Tekhnol. Legk. Spl., no. 1:53–56.
230. Dobatkin, V.I., G.I. Eskin, S.I. Borovikova, et al. 1986. Method for continuous casting of light-alloy ingots. U.S. patent 4564059, filed 13.06.1981, issued 14.01.1986 (also U.K. patent 2100635, Swiss patent 651253, French patent 2507933, Canadian patent 1194675, German patent 3126590).
231. Eskin, G.I. 1988. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
232. Kapustin, A.P. 1962. Effect of ultrasound on the kinetics of crystallization. Moscow: Nauka.
233. Walker, J.L. 1958. In Proc. ASM Seminar Liquid Metals and Solidification, 319–36. Metals Park, OH: ASM Publication.
234. Chalmers, B. 1964. Principles of solidification. New York: John Wiley & Sons.
235. Hunt, J.D., and K.A. Jackson. 1966. J. Appl. Phys. 37:254–57.
236. Frawley, J.J., and W.J. Childs. 1968. Trans. Met. Soc AIME. 242:256–63.
237. Eskin, G.I. 1961. Ultrasound in metallurgy. Moscow: Metallurgizdat.
238. Eskin, G.I. 1965. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
239. Danilov, V.I. 1956. Constitution and crystallization of liquids. Kiev: Izd. Akad. Nauk SSSR.
240. Danilov, V.I., and V.E. Neimark. 1949. Zh. Eksper. Teor. Fiz. 19:235–41.
241. Danilov, V.I., and D.E. Ovsienko. 1951. Zh. Eksper. Teor. Fiz. 21:879–87.
242. Kazachkovsky, O.D. 1948. In Collective papers of the Laboratory of Metals Physics, ed. V.I. Danilov, 103–112. Kiev: Izd. Akad. Nauk UkrSSR.
243. Swallowe, G.M., J.E. Field, C.S. Rees, and A. Duckworth. 1989. Acta Mater. 37:961–67.
244. Chow, R., R. Blindt, R. Chivers, and M. Povey. 2005. Ultrasonics 43:227–30.
245. Chvorinov, N.I. 1954. Crystallization and non-homogeneity of steel. Prague: Publishing House of Czechoslovak Academy of Sciences (NČSAV).
246. Balandin, G.F. 1973. Formation of crystalline structure of castings. Moscow: Mashinostroenie.
247. Flemings, M.C. 1974. Solidification processing. New York: McGraw-Hill.
248. Campbell, J. 1981. Int. Met. Rev., no. 2:71–108.
249. Abramov, O.V. 1972. Crystallization of metals in an ultrasonic field. Moscow: Metallurgiya.
250. Vogel, A., R.D. Doherty, and B. Cantor. 1979. In Solidification and casting of metals, 518–25. London: TMS.
251. Pilling, J., and A. Hellawell. 1996. Metall. Mater. Trans. A 27A:229–32.
252. Jackson, K.A., J.D. Hunt, D.R Uhlmann, and T.P. Seward. 1966. Trans. Metall. Soc. AIME 236:149–60.
253. Chernov, A.A. 1956. Kristallografiya 1:589–93.
254. Kattamis, T.Z., J.C. Coughlin, and M.C. Flemings. 1967. Trans. Metall. Soc. AIME 239:1504–11.
255. Ruvalcaba, D., R.H. Mathiesen, D.G. Eskin, L. Arnberg, and L. Katgerman. 2007. Acta Mater. 55:4287–92.
256. Abramov, O.V., and I.I. Teumin. 1970. Crystallization of metals. In Physical principles of ultrasonic technology, ed. L.D. Rozenberg, 427–514. Moscow: Nauka. (Translated by New York: Plenum, 1973.)
257. Shu, D., B. Sun, J. Mi, and P.S. Grant. 2012. Metall. Mater. Trans. A 43A:3755–66.
258. Grandfield, I.F., D.G Eskin, and I.F. Bainbridge. 2013. Direct-chill casting of light alloys: Science and technology. Hoboken, NJ: Wiley.
259. Dobatkin, V.I., R.M. Gabidullin, B.A. Kolachev, and G.S. Makarov. 1976. Gases and oxides in aluminum wrought alloys. Moscow: Metallurgiya.
260. Sebo, P., J. Ivan, L. Táborský, and A. Havalda. 1973. Kovové Materiály 11 (2): 173–80.
261. Eskin, D.G. 1996. Z. Metallkde. 87:295–99.
262. Fan, Z., and Y. Wang. 2011. Brunel University, BCAST. Private communication.
263. Fan, Z., Y. Wang, M. Xia, and S. Arumuganathar. 2009. Acta Mater. 57:4891–4901.
264. Chen, Y-J., W.-N. Hsu, and J.-R. Shih. 2009. Mater. Trans. 50:401–8.
265. StJohn, D.H., M. Qian, A. Easton, P. Cao, and Z. Hildebrand. 2005. Metall. Mater. Trans. A 36A:1669–79.
266. Bhingole, P.P., and G.P. Chaudhari. 2012. Mater. Sci. Eng. A 556:954–61.
267. Atamanenko, T.V., D.G. Eskin, L. Zhang, and L. Katgerman. 2010. Metall. Mater. Trans. A 41A:2056–66.
268. Eskin, G.I. 1988. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
269. Dantzig, J.A., and M. Rappaz. 2009. Solidification. Lausanne, Switzerland: EPFL, 51–56; Boca Raton, FL: CRC Press, 268–75.
270. StJohn, D.H., M. Qian, M.A. Easton, and P. Cao. 2011. Acta Mater. 59:4907–21.
271. StJohn, D.H., M.A. Easton, M. Qian, and J.A. Taylor. 2013. Metall. Mater. Trans. A 44A:2935-49.
272. Rumpf, H. 1962. In Agglomeration, ed. W.A. Knepper, 382–403. New York: John Wiley.
273. Agranat, B.A., M.N. Dubrovin, N.N. Khavsky, and G.I. Eskin. 1987. Fundamentals of physics and technology of ultrasound, 297–300. Moscow: Vysshaya Shkola.
274. Bochvar, S.G., and G.I. Eskin. 2012. Tekhnol. Legk. Spl., no. 1:9–17.
275. Eskin, G.I., A.A. Rukhman, S.G. Bochvar, V.I. Yalfimov, and D.V. Konovalov. 2008. Tzvetn. Met., no. 3:105–110.
276. Eskin, G.I., and D.G. Eskin. 2010. In Proc. Intern. Conf. Aluminum Alloys ICAA12, 638–45. Tokyo: Jpn. Inst. Light Metals.
277. Atamanenko, T.V. 2010. Cavitation-aided grain refinement in aluminium alloys. PhD thesis, Delft, Delft University of Technology.
278. Zhang, L., D.G. Eskin, and L. Katgerman. 2011. J. Mater. Sci. 46:5252–59.
279. Han, Y., K. Li, J. Wang, D. Shu, and B. Sun. 2005. Mater. Sci. Eng. A 405:306–12.
280. Han, Y., D. Shu, J. Wang, and B. Sun. 2006. Mater. Sci. Eng. A 430:326–31.
281. Ramirez, A., M. Qian, B. Davis, T. Wilks, and D.H. StJohn. 2008. Scr. Mater. 59:19–22.
282. Atamanenko, T.V., D.G. Eskin, L. Zhang, and L. Katgerman. 2010. Metall. Mater. Trans. A 41A:2056–66.
283. Atamanenko, T.V., D.G. Eskin, M. Sluiter, and L. Katgerman. 2011. J. Alloys Compd. 509 (1): 57–60.
284. Zhang, L., D.G. Eskin, A. Miroux, and L. Katgerman. 2012. In Proc. 13th Intern. Conf. Aluminum Alloys ICAA13, ed. H. Weiland, A.D. Rollet, and W.A. Cassada, 1389–94. Warrendale, PA: TMS.
285. Zhang, L., D.G. Eskin, A. Miroux, and L. Katgerman. 2011. IOP Conf. Series: Mater. Sci. Eng. 27: Paper 012002.
286. Wagterveld, R.M., L. Boels, M.J. Mayer, and G.J. Witkamp. 2011. Ultrason. Sonochem. 18:216–25.
287. Ramirez, A., and M. Qian. 2007. In Magnesium technology, ed. R.S. Beals, A.A. Luo, N.R. Neelameggham, and M.O. Pekguleryuz, 127–32. Warrendale, PA: TMS.
288. Livanov, V.A. 1945. In Proc. First Technological Conference of Metallurgical Plants of Peoples’ Commissariat of Aviation Industry, 5–58. Moscow: Oborongiz.
289. Dobatkin, V.I. 1948. Continuous casting and casting properties of alloys. Moscow: Oborongiz.
290. Alexander, B.H., and F.N. Rhines. 1950. Trans. AIME 188:1267–73.
291. Spear, R.E., and G.R. Gradner. 1963. Trans. AFS 71:209–15.
292. Bower, T.F., H.D. Brody, and M.C. Flemings. 1966. Trans. AIME 236:624–34.
293. Kattamis, T.Z., U.T. Holmberg, and M.C. Flemings. 1967. J. Inst. Met. 95:343–47.
294. Matyia, H., B.C. Giessen, and N.J. Grant. 1968. J. Inst. Met. 96:30–32.
295. Kattamis, T.Z., and R.B. Williamson. 1968. J. Inst. Met. 96:251–52.
296. Dobatkin, V.I., G.I. Eskin, and S.I. Borovikova. 1971. Tekhnol. Legk. Spl., no. 6:9–17.
297. Dobatkin, V.I., G.I. Eskin, S.I. Borovikova, and Yu.G. Golder. 1976. In Processing of light and high-temperature alloys, 151–62. Moscow: Nauka.
298. Dobatkin, V.I., and G.I. Eskin. 1991. Tsvetn. Met., no. 12:64–67.
299. Dobatkin, V.I., A.F. Belov, G.I. Eskin, S.I. Borovikova, and Yu.G. Golder. 1983. Bull. Discoveries, Inventions, no. 37:1.
300. Eskin, D.G. 2008. Physical metallurgy of direct chill casting of aluminum alloys, 79–124. Boca Raton, FL: CRC Press.
301. Dobatkin, V.I., and G.I. Eskin. 1995. Izv. Ross. Akad. Nauk., Met., no. 4:36–41.
302. Nadella, R., D.G. Eskin, and L. Katgerman. 2008. Metall. Mater. Trans. A 39A:450–61.
303. Eskin, D.G., R. Nadella, and L. Katgerman. 2008. Acta Mater. 56:1358–65.
304. Atamanenko, T.V., D.G. Eskin, and L. Katgerman. 2008. In Proc. 11th Intern. Conf. Aluminium Alloys: Their Physical and Mechanical Properties, ICAA11, ed. J. Hirsch, B. Skrotzki, and G. Gottstein, 316–320. Weinheim, Germany: Wiley-VCH.
305. Li, J.-W., T. Momono, Y. Fu, Z. Jia, and Y. Tayu. 2007. Trans. Nonferrous Met. Sci. China. 17:691–97.
306. Eskin, G.I., and D.G. Eskin. 2004. Z. Metallkde. 95:682–90.
307. Jain, X., H. Xu, T.T. Meek, and Q. Han. 2005. Mater. Lett. 59:190–93.
308. Jian, X., T.T. Meek, and Q. Han. 2006. Scr. Mater. 54:893–96.
309. Zhang, S., Y. Zhao, Z. Cheng, G. Chen, and Q. Dai. 2009. J. Alloys Comp. 470:168–72.
310. Zhang, L., 2013. Ultrasonic Processing of Aluminum Alloys, PhD thesis, Delft, Delft University of Technology.
311. Eskin, G.I., and D.G. Eskin. 2003. Ultrason. Sonochem. 10:297–301.
312. Eskin, G.I., and I.N. Fridlyander. 1961. Izv. Akad. Nauk SSSR, Otdel. Tekhn. Nauk, Metall. Topl. no. 5:110–112.
313. Dobatkin, V.I., and G.I. Eskin. 1985. In Metals science of aluminum alloys, 163–71. Moscow: Nauka.
314. Eskin, G.I., and D.G. Eskin. 2004. Z. Metallkde. 95:682–90.
315. Pogodin-Alekseev, G.I., and V.M. Gavrilov. 1966. Izv. Akad. Nauk SSSR, Met., no. 1:27–38.
316. Eskin, G.I. 1965. Ultrasonic treatment of molten aluminum. Moscow: Metallurgizdat.
317. von Seemann, H.-J., and K.-G. Pretor. 1966. Z. Metallkde. 57:347–49.
318. Zhang, L. 2013. Ultrasonic processing of aluminum alloys. PhD thesis, Delft, Delft University of Technology.
319. Zhong, G., S. Wu, H. Jiang, and P. An. 2010. J. Alloy Comp. 492:482–87
320. Dobatkin, V.I., and G.I. Eskin. 1991. Tsvetn. Met., no. 12:64–67.
321. Eskin, G.I., G.S. Makarov, and Yu.P. Pimenov. 1995. Adv. Perform. Mater. 2:43–50.
322. Zhang, L., D.G. Eskin, and L. Katgerman. 2011. J. Mater. Sci. 46:5252–59.
323. Zhang, L., D.G. Eskin, A.G. Miroux, and L. Katgerman. 2011. IOP Conf. Series: Mater. Sci. Eng. 27:paper 012002.
324. Zhang, L., D.G. Eskin, A. Miroux, and l. Katgerman. 2012. Light metals 2012, ed. C.E. Suarez, 999–1004. Warrendale, PA: TMS.
325. Feng, H.K., S.R. Yu, Y.L. Li, and L.Y. Gong. 2008. J. Mater. Process. Technol. 208:330–35.
326. Altman, M.B., G.I. Eskin, and I.S. Gotsev. 1981. In Alloying and processing of light alloys, 30–35. Moscow: Nauka.
327. Pimenov, Yu.P., V.I. Tararyshkin, and G.I. Eskin. 1997. Tekhnol. Legk. Spl., no. 3:17–23.
328. Eskin, D.G., M.L. Kharakterova, G.I. Eskin, and Yu.P. Pimenov. 1998. Izv. Ross. Akad. Nauk, Met., no. 2:91–98.
329. Kyffin, W.J., W.M. Rainforth, and H. Jones. Mater. Sci. Technol. 17:901–5.
330. Eskin, G.I., G.S. Makarov, and Yu.P. Pimenov. 1997. Mater. Sci. Forum 242:65–70.
331. Brodova, I.G., P.S. Popel, and G.I. Eskin. 2002. Liquid metal processing: Applications to aluminium alloy production. London and New York: Taylor and Francis.
332. Eskin, G.I., and E.I. Panov. 2002. Tsvetn. Met., no. 9:85–89.
333. Panov, E.I., G.I. Eskin, A.A. Voskan’yants, and O. Yu Il’in. 2002. Metallurgist 46 (7–8): 237–40.
334. Panov, E.I., and G.I. Eskin. 2004. Metalloved. Termich. Obrab. Mater., no. 9:7–13.
335. Eskin, G.I., E.I. Panov, L.B. Ber, B.N. Stepanov, S.G. Bochvar, and V.I. Yalfimov. 2008. Metallurgist 52 (7–8): 388–94.
336. Grandfield, J.H., D.G. Eskin, and I.F. Bainbridge. 2013. Direct-chill casting of light alloys: Science and technology. Hoboken, NJ: John Wiley and Sons.
337. Eskin, D.G. 2008. Physical metallurgy of direct-chill casting of aluminum alloys. Boca Raton, FL: CRC Press.
338. Eskin, G.I. 1965. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
339. Nadella, R., D.G. Eskin, Q. Du, and L. Katgerman. 2008. Progr. Mater. Sci. 53 (3): 421–80.
340. Eskin, D.G., A. Jafari, and L. Katgerman. 2011. Mater. Sci. Technol. 27:890–96.
341. Eskin, G.I. 1988. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
342. Atamanenko, T.V. 2010. Cavitation-aided grain refinement in aluminium alloys. PhD thesis, Delft, Delft University of Technology.
343. Nadella, R., D.G. Eskin, and L. Katgerman. 2008. Metall. Mater. Trans. A 39 (2): 450–61.
344. Eskin, D.G., R. Nadella, and L. Katgerman. 2008. Acta Mater. 56 (6): 1358–65.
345. Novikov, I.I. 1966. Hot shortness of non-ferrous metals and alloys. Moscow: Nauka.
346. Eskin, D.G., Suyitno, and L. Katgerman. 2004. Progr. Mater. Sci. 49 (5): 629–711.
347. Livanov, V.A., R.M. Gabidullin, and V.S. Shepilov. 1977. Continuous casting of aluminum alloys. Moscow: Metallurgiya.
348. Teitel, I.L. 1961. In Wrought aluminum alloys, ed. I.N. Fridlyander, V.I. Dobatkin, and E.D. Zakharov, 200–9. Moscow: Oborongiz.
349. Dobatkin, V.I., G.I. Eskin, and S.I. Borovikova. 1973. Fiz. Khim. Obrab. Mater., no. 6:37–41.
350. Dobatkin, V.I., G.I. Eskin, and S.I. Borovikova. 1976. In Light and high-temperature alloys, 151–61. Moscow: Nauka.
351. Dobatkin, V.I., and G.I. Eskin. 1991. Tsvetn. Met., no. 12:64–67.
352. Eskin, G.I. 2002. Z. Metallkde. 93:503–7.
353. Eskin, G.I., and D.G Eskin. 2002. Mater. Sci. Forum 396–402:77–82.
354. Eskin, G.I., and P.R. Silayev. 1981. In Processes of treatment of light and high-temperature alloys, 118–22. Moscow: Nauka.
355. Yunyshev, V.K., G.I. Eskin, and P.R. Silayev. 1981. Tekhnol. Legk. Spl., no. 2:26–30.
356. Anonymous. 2003. Light Metal Age, February:47–49.
357. Turkina, N.I., and E.V. Semenova. 1992. Technol. Legk. Spl., no. 1:57–59.
358. Yelagin, V.I., V.V. Zakharov, and T.D. Rostova. 1995. In Metals science, casting and processing of alloys, 6–16. Moscow: VILS.
359. Eskin, G.I. 1998. Ultrasonic melt treatment of light alloy melts. Amsterdam: Gordon and Breach Science Publ.
360. Hoff, J.C. 1970. US Patent 3,634,075.
361. Granger, D.A. 1998. In Light metals, ed. B. Welch, 941–52. Warrendale, PA: TMS.
362. Greer, A.L, A.M. Bunn, A. Tronche, P.V. Evans, and D.J. Bristow. 2000. Acta Mater. 48:2823–35.
363. Eskin, G.I., A.A. Rukhman, S.G. Bochvar, V.I. Yalfimov, and D.V. Konovalov. 2008. Tsvetn. Met., no. 3:105–10.
364. Eskin, G.I., S.G. Bochvar, and V.I. Yalfimov. 2010. Tekhnol. Legk. Spl., no. 1:38–43.
365. Bochvar, S.G., and G.I. Eskin. 2012. Tekhnol. Legk. Spl., no. 1:9–17.
366. Guryev, I.I., G.I. Eskin, and A.E. Ansyutina. 1978. In Magnesium alloys, 136–40. Moscow: Nauka.
367. Guryev, I.I., G.I. Eskin, and A.E. Ansyutina. 1986. In Metals science: Casting and processing of light alloys, 114–26. Moscow: VILS.
368. Eskin, G.I. 1994. In Technology of processing light and special alloys, 136–48. Moscow: VILS.
369. Eskin, G.I. 2003. Metallurgist 47:265–72.
370. Shao, Z., Q. Le, Z. Zhang, and J. Cui. 2011. Mater. Design 32:4216–24.
371. Shvetsov, P.N., V.I. Lyakhova, and T.A. Vlasova. 1973. Tekhnol. Legk. Spl., no. 9:13–17.
372. Eskin, G.I., and P.N. Shvetsov. 1977. In Metals science and casting of light alloys, 8–17. Moscow: Metallurgiya.
373. Eskin, G.I. 1996. In Advances in sonochemistry, vol. 4, ed. T. Mason, 101–59. Oxford, UK: JAI Press.
374. Eskin, G.I., V.G. Kudryashov, P.N. Shvetsov, Z.K. Kuzminskaya, I.A. Skotnikov, and A.D. Petrov. 1990. Izv. Akad. Nauk SSSR, Met., no. 1:53–57.
375. Eskin, G.I., and S.I. Borovikova. 1993. Metalloved. Termich. Obrab. Mater., no. 6:18–20.
376. Sinyavsky, V.S., V.D. Valkov, and V.D. Kalinin. 1986. Corrosion and protection of aluminum alloys. Moscow: Metallurgiya.
377. Ansyutina, A.N., I.I. Guryev, and G.I. Eskin. 1973. Tekhnol. Legk. Spl., no. 9:34–37.
378. Guryev, I.I., G.I. Eskin, A.B. Karan, A.E. Ansyutina, and T.N. Osokina. 1975. Tekhnol. Legk. Spl., no. 12:25–29.
379. Belov, N.A., A.A. Aksenov, and D.G. Eskin. 2002. Iron in aluminum alloys: Impurity and alloying element. London: Taylor and Francis.
380. Kuijpers, N.C.W., J. Tirel, D.N. Hanlon, and S. van der Zwaag. 2002. Mater. Charact. 48:379–92.
381. Eskin, G.I. 1965. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
382. Eskin, G.I., V.I. Slotin, and S.Sh. Katsman. 1967. Precision casting of parts for aviation assemblies from aluminum alloys. Moscow: Mashinostroenie.
383. Ryzhenkova, M.P., G.I. Eskin, and M.B. Altman. 1974. In Application of new physical methods for intensification of metallurgical processes, Proc. MISiS, no. 77:170–73.
384. Levy, L.I., L.B. Maslan, Yu I. Kitaygorodsky, et al. 1972. Russian invention certificate no. 343765, 07.07.1972.
385. Prokic, J M. 2001. European patent application EP 1238715A1.
386. Puga, H., J. Barbosa, J. Gabriel, E. Seabra, S. Ribeiro, and M. Prokic. 2011. J. Mater. Proc. Technol. 211:1026–33.
387. Khalifa, W., Y. Tsunekawa, and M. Okumiya. 2010. J. Mater. Proc. Technol. 210:2178–87.
388. Eskin, G.I. 1979. Ultrasonic melt treatment in processes of shape and continuous casting of light alloys. Moscow: Mashinostroenie.
389. Altman, M.B., G.I. Eskin, I.S. Gotsev, and N.P. Stromskaya. 1981. In Alloying and processing of light alloys, 30–35. Moscow: Nauka.
390. Pogodin-Alekseev, I.G., and V.V. Zaboleev-Zotov. 1958. Lit. Proizvod., no. 7:35–36.
391. von Seemann, H.J., and H. Staats. 1968. Z. Metallde. 39:347–56.
392. Mortensen, A., and I. Jin. 1992. Int. Mater. Rev. 37 (3): 101–28.
393. Sobczak, N., J. Sobczak, R. Asthana, and R. Purgert. 2010. China Foundry 7: 425–37.
394. Hashim, J., L. Looney, and M.S.J. Hashimi. 2001. J. Mater. Process. Technol. 119: 324–28.
395. Korolkov, A.M. 1960. Casting properties of metals and alloys, 32–75. Moscow: Izd. Akad. Nauk SSSR.
396. Sobczak, N. 2004. Ceram. Trans., vol. 146, ed. K. Ewsuk, K. Nogi, M. Reiterer, A. Tomsia, S.J. Glass, R. Waesche, K. Uematsu, and M. Naito, 83–90.
397. Hentrich, P. (ed.). 2000. Handbook of mixing technology fundamentals, process design, impellers and agitation systems, mechanical design, detail design, sealing technology, reliability and safety, fields of application. Schopfheim, Germany: Ekato.
398. Hemrajani, R.R., and G.B. Tatterson. 2004. Mechanically stirred vessels. In Handbook of industrial mixing: Science and practice, ed. E.L. Paul, V.A. Atiemo-Obeng, and S.M. Kresta, 345–90. Hoboken, NJ: John Wiley & Sons.
399. Atiemo-Obeng, V.A., W.R. Penney, and P. Armenante. 2004. Solid–liquid mixing. In Handbook of industrial mixing: Science and practice, ed. E.L. Paul, V.A. Atiemo-Obeng, and S.M. Kresta, 543–84. Hoboken, NJ: John Wiley & Sons.
400. Aniban, N., R.M. Pillai, and B.C. Pai. 2002. Mater. Design 23:553–56.
401. Kolmakov, A.I., V.I. Silaeva, T.V. Solov’eva, and G.I. Eskin. 1972. In Application of ultrasound in industry, 21–24. Alma-Ata, Kazakhstan: NTO Mashprom.
402. Eskin, G.I., and D.G. Eskin. 2003. Ultrason. Sonochem. 10:297–301.
403. Yang, Y., and X. Li. 2007. J. Manuf. Sci. Eng. 129: 497–501.
404. Cao, G., H. Konishi, and X. Li. 2008. Mater. Sci. Eng. A 486:357–62.
405. Yang, Y., J. Lan, and X. Li. 2004. Mater. Sci. Eng. A 380: 378–83.
406. Sidorin, I.I., V.I. Silaeva, T.V. Solov’eva, V.I. Slotin, and G.I. Eskin. 1971. Metalloved. Termich. Obrab. Met., no. 8:23–26.
407. Eskin, G.I. 1974. Tekhnol. Legk. Spl., no. 11:21–25.
408. Choi, H., M. Jones, H. Konishi, and X. Li. 2012. Metall. Mater. Trans. A 43A: 738–46.
409. Choi, H., Y. Sun, B.P. Slater, H. Konishi, and X. Li. 2012. Adv. Eng. Mater. 14:291–95.
410. Nimityuongskul, S., M. Jones, H. Choi, R. Lakes, S. Kou, and X. Li. 2010. Mater. Sci. Eng. A 527:2104–11.
411. Wang, D., M.P. De Cicco, and X. Li. 2012. Mater. Sci. Eng. A 532:396–400.
412. von Seemann, H.J., and H. Staats. 1962. German patent DE1126074(B), publ. 22.03.1962.
413. Eskin, G.I., and P.N. Shvetsov. 1969. USSR invention certificate 246060, publ. 01.01.1969.
414. Tsunekawa, Y., H. Sizuki, and Y. Genma. 2001. Mater. Design 22:467–72.
415. Eskin, G.I., B.I Semenov, and D.N. Lobkov. 2001. Lit. Proizvod., no. 9:2–8.
416. Sidorin, I.I., V.I. Slotin, T.V. Solov’eva, and G.I. Eskin. 1972. Izv. Vyssh. Uchebn. Zaved., Mashinostr., no. 8:116–20.
417. Mussi, R.G.S., T. Motegi, F. Tanabe, H. Kawamura, K. Anzai, D. Shiba, and M. Suganuma. 2006. Solid State Phenom. 116–117:392–96.
418. Chen, L.Y., J.-Y. Peng, J.-Q. Xu, H. Choi, and X.-C. Li. 2013. Scr. Mater. 69:634–37.
419. Naidich, Ju.V. 1981. Progr. Surf. Membr. Sci. 14:353–484.
420. Shiying, L., G. Feipeng, Z. Qiongyuan, and L. Wenzhen. 2009. Mater. Sci. Forum 618–619:433–36.
421. Abramov, O.V. 2000. Influence of powerful ultrasound on liquid and solid metals, 142–63. Moscow: Nauka.
422. Kaptay, G. 2001. Metall. Mater. Trans. A 32A:993–1005.
423. Xu, J.Q., L.Y. Chen, H. Choi, and X.C. Li. 2012. J. Phys.: Condens. Matter 24:paper 255304.
424. Cao, G., H. Konishi, and X. Li. 2008. J. Manuf. Sci. Eng. 130:paper 031105.
425. Chen, L.-Y., H. Konishi, A. Fehrenbaher, C. Ma, J.-Q. Xu, H. Choi, H.-F. Xu, F.E. Pfefferkorn, and X.-C. Li. 2012. Scr. Mater. 67:29–32.
426. Jia, X.Y., S.Y. Liu, F.P. Gao, Q.Y. Zhang, and W.Z. Li. 2009. Int. J. Cast Metals Res. 22 (1–4): 196–99.
427. Nie, K.B., X.J. Wang, X.S. Hu, L. Xu, K. Wu, and M.Y. Zheng. 2011. Mater. Sci. Eng. A 528:5278–82.
428. de Cicco, M., H. Konishi, G. Cao, H.S. Choi, L.-S. Turng, J.H. Perepezko, S. Kou, R. Lakes, and X. Li. 2009. Metall. Mater. Trans. A 40A:3038–45.
429. Cao, G., H. Choi, J. Oportus, H. Konishi, and X. Li. 2008. Mater. Sci. Eng. A 494:127–31.
430. Mula, S., P. Padhi, S.C. Panigrahim, S.K. Pabi, and S. Gosh. 2009. Mater. Res. Bull. 44:1154–60.
431. Choi, H., H. Konishi, and X. Li. 2012. Mater. Sci. Eng. A 541:159–65.
432. Wood, R.W., and A.L. Loomis. 1927. Phil. Mag. 4:417–25.
433. Richards, W.T. 1929. J. Am. Chem. Soc. 51:1724–29.
434. Bondy, C., and K. Söllner. 1935. Trans. Faraday Soc. 31:835–42.
435. Schmid, G., and L. Ehret. 1937. Z. Elektrochem. 43:869–74.
436. Bekker, V. 1941. Novosti Tekhniki 10 (4): 25–26.
437. Neduzhy, S.A. 1961. Akust. Zh. 7:275–94.
438. Neduzhy, S.A. 1964. Akust. Zh. 10:456–64.
439. Abismaıl, B., J.P. Canselier, A.M. Wilhelm, H. Delmas, and C. Gourdon. 1999. Ultrason. Sonochem. 6:75–83.
440. Behrend, O., K. Ax, and H. Schubert. 2000. Ultrason. Sonochem. 7:77–85.
441. Behrend, O., and H. Schubert. 2001. Ultrason. Sonochem. 8:271–76.
442. Fedorov, P.I., V.I. Shachnev, and A.M. Dolgopolova. 1962. Izv. Vyssh. Uchebn. Zaved., Tsvetn. Metall., no. 2:58–64.
443. Matyia, H., B.C. Giessen, and N.J. Grant. 1968. J. Inst. Met. 96:30–32.
444. Grant, N.J. 1992. Metall. Trans. A 23:1083–93.
445. Patterson, R.I., A.R. Cox, and E.C. van Reuth. 1980. JOM 32 (9): 34–39.
446. Savage, S.J., and F.H. Froes. 1984. JOM 36 (4): 20–33.
447. Abramov, O.V. 1998. High-intensity ultrasonics, 237–63. Amsterdam: Gordon and Breach OPA.
448. Ensminger, D., and L.J. Bond. 2011. Ultrasonics: Fundamentals, technologies, and applications, 533–40. Boca Raton, FL: CRC Press.
449. Eskin, G.I. 2006. In Promising technologies of light and special alloys, 194–212. Moscow: Fizmatlit.
450. Grant, N.J. 1983. JOM 35 (1): 20–27.
451. Pohlman, R., K. Heisler, and M. Cichos. 1974. Ultrasonics 12:11–15.
452. Petrov, D.A. 1947. Zh. Fiz. Khim 21 (12): 29–31.
453. Pfann, W.G. 1966. Zone melting. 2nd ed. New York: John Wiley & Sons.
454. Mathiesen, R.H., and L. Arnberg. 2005. Acta Mater. 53:947–56.
455. Burton, J.A., R.C. Prim, and W.P. Slichter. 1953. J. Chem. Phys. 21:1987–91.
456. Lee, N., and J. Cahoon. 2011. J. Phase Equilib. Diff. 32:226–34.
457. Abramov, O.V., I.I. Teumin, V.A. Filonenko, and G.I. Eskin. 1967. Akust. Zh. 13 (2): 161–69.
458. Agranat, B.A., G.I. Eskin, E.N. Ozerenskaya, S.A. Afanas’ev, K.B. Yurkevich, and A.V. Stamov-Vitkovsky. 1976. Invention certificate SU 512791 A1, publ. 05.05.1976.
459. Eskin, G.I. 1988. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
460. Eskin, G.I., B.A. Agranat, and E.N. Ozerenskaya. 1980. In Physical and physico-chemical methods of intensification of technological processes, Proc. Mosc. Inst. Steel and Alloys, vol. 124, 109–118. Moscow: Metallurgiya.
461. Zarembo, L.K. 1970. In Physics and technology of powerful ultrasound, vol. 2, ed. L.D. Rozenberg, 87–128. Moscow: Nauka.
462. Abramov, O.V., Yu.S. Astashkin, and V.S. Stepanov. 1979. Akust. Zh. 25:180–86.
463. Spencer, D.B., R. Mehrabian, and M.C. Flemings. 1972. Metall. Trans. 3:1925–32.
464. Flemings, M.C. 1991. Metall. Trans. A 22A:957–80.
465. Fan, Z. 2002. Int. Mater. Rev. 47 (2): 49–85.
466. Davis, J.R. (ed.) 1993. Aluminum and aluminum alloys: ASM specialty handbook, 102–3. Materials Park, OH: ASM International.
467. Dobatkin, V.I., and G.I. Eskin. 1996. Tsvetn. Met. 2:68–71.
468. Dobatkin, V.I., and G.I. Eskin. 1996. In Proc. 4th Int. Conf. on semi-solid processing of alloys and composites, ed. D.H. Kirkwood, and P. Kapranos, 193–96. Sheffield, UK: University of Sheffield.
469. Kaufmann, H., H. Wabusseg, and P.J. Uggowitzer. 2000. Aluminium 76 (1–2): 70–75.
470. Eskin, G.I., S.G. Bochvar, and V.V. Belotserkovets. 1998. Tekhnol. Legk. Spl., no. 3:23–28.
471. Eskin, G.I., and V.N. Serebryany. 2000. In Proc. 6th Int. Conf. on semi-solid processing of alloys and composites, ed. G.L. Chiametta, and M. Rosso, 361–66. Brescia, Italy: Edimet.
472. Eskin, G.I., and V.N. Serebryany. 2001. Tekhnol. Legk. Spl., no. 5–6:32–38.
473. Kopp, R., D. Neudenberger, M. Wimmer, and G. Winning. 1998. In Proc. 5th Int. Conf. on semi-solid processing of alloys and composites, ed. A. K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, 165–72. Golden, CO: Colorado School of Mines.
474. Kong, G.G., and Y.H. Moon. 1998. In Proc. 5th Int. Conf. on semi-solid processing of alloys and composites, ed. A. K. Bhasin, J.J. Moore, K.P. Young, and S. Midson, 573–80. Golden, CO: Colorado School of Mines.
475. Eskin, G.I., M.V. Moiseeva, and V.N. Serebryany. 2003. Tekhnol. Legk. Spl., no. 4:3–7.
476. Eskin, G.I., B.I. Semenov, V.N. Serebryany, and Yu.P. Kirdeev. 2002. In Proc. 7th Int. Conf. on advanced semi-solid processing of alloys and composites, ed. Y. Tsutsui, M. Kiuchi, and K. Ichikawa, 397–402. Tsukuba, Japan: Nat. Inst. Adv. Industr. Sci. Technol.
477. Eskin, G.I., B.I. Semenov, V.N. Serebryany, and Yu.P. Kirdeev. 2003. Metallurg. Machinostr., no. 2:41–45.
478. Apelian, D. 2000. In Proc. 6th Int. Conf. on semi-solid processing of alloys and composites, ed. G.L. Chiametta and M. Rosso, 47–54. Brescia, Italy: Edimet.
479. Lü, S., S. Wu, Z. Zhu, P. An, and Y. Mao. 2010. Trans. Nonferrous Met. Soc. China 20:758–62.
480. Wu, S., S. Lü, P. An, and H. Nakae. 2012. Mater. Lett. 73:150–53.
481. Lü, S., S. Wu, C. Lin, Z. Hu, and P. An. 2011. Mater. Sci. Eng. A 528:8635–40.
482. Mason, W.P. (ed.). 1964. Physical acoustics: Principles and methods. Vol. 1: Methods and devices Part B. New York: Academic Press.
483. Eskin, G.I. 1988. Ultrasonic treatment of molten aluminum. 2nd ed. Moscow: Metallurgiya.
484. Abramov, O.V. 1998. High-intensity ultrasonics: Theory and industrial applications. Amsterdam: Gordon and Breach OPA.
485. Ensminger, D., and L.J. Bond. 2011. Ultrasonics: Fundamentals, technologies, and applications. 3rd ed. Boca Raton, FL: CRC Press.
486. Patel, D.M., and A.U. Rajurkar. 2011. Proc. Int. Conf. Comput. Meth. Manufacturing. ICCMM 2011, 115–21. Assam, India: Indian Institute of Technology Guwahati.
487. Ensminger, D., and F.B. Stulen. 2008. Ultrasonics: Data, equations and their practical uses. Boca Raton, FL: CRC Press.
488. Teumin, I.I. 1968. Introduction of ultrasonic oscillations in processed medium. Moscow: Machinostroenie.
489. Abramov, V., O. Abramov, V. Bulgakov, and F. Sommer. 1998. Mater. Lett. 37:27–34.
490. Ferraro, R.J., and R.B. McLellan. 1979. Metall. Trans. A 10A:1699–1702.
491. Eskin, G.I. 1965. Ultrasonic treatment of molten aluminum. Moscow: Metallurgiya.
492. Yan, M., and Z. Fan. 2001. J. Mater. Sci. 36:285–95.
493. Grießhammer, A. 1967. Ultrasonics 5:229–32.
494. Hiedemann, E.A. 1954. J. Acoust. Soc. Am. 26:831–842.
495. Puga, H., J. Barbosa, J. Gabriel, E. Seabra, S. Ribeiro, and M. Prokic. 2011. J. Mater. Process. Technol. 211:1026–33.
496. Puga, H., J. Barbosa, D. Soares, F. Silva, and S. Ribeiro. 2009. J. Mater. Process. Technol. 209:5195–5203.
497. Makarov, L.O. 1983. Acoustic measurements in processes of ultrasonic technology. Moscow: Mashinostroeniye.
498. Teumin, I.I. 1961. Techn. Inform. Bull. Spec. Des. Bur. (OKB) for ultrasonic and high-frequency equipment, no. 1 (19): 9–12.