Mechanical properties in the semi-solid state and hot tearing of aluminium alloys

Progress in Materials Science

Volumn 49, Issue 5, 2004, Pages 629-711

  Eskin, D G ^a   Suyitno, ^b   Katgerman, L ^a,b  

^a NETHERLANDS INSTITUTE FOR METALS RESEARCH   (Netherlands)

^b DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

CRACK INITIATION; DUCTILITY; MECHANICAL PROPERTIES; MICROSTRUCTURE; POROSITY; SHRINKAGE; SOLIDIFICATION; THERMAL EFFECTS;

COHERENCE POINT; INTRINSIC PROPERTIES; MECHANICAL DEFORMATION; THERMAL HISTORY;

ALUMINUM ALLOYS;

EID: 2442457610     PISSN: 00796425     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0079-6425(03)00037-9     Document Type: Review

References (102)

1. Quaak CJ. PhD thesis, Delft University of Technology, Delft, 1996.
2. Bishop H.F., Ackerlind C.G., Pellini W.S. AFS Trans. 60:1952;818.
3. Pellini W.S. Foundry. 80:1952;124.
4. Borland J.C. British Welding Journal. 7:1960;508.
5. Metz S.A., Flemings M.C. AFS Trans. 78:1970;453.
6. Feurer U. Giessereiforschung. 28:1976;75.
7. Clyne T.W., Davies G.J. Solidification and casting of metals. 1979;275 Metals Society, London.
8. Matsuda F., Nakagawa H., Katayama S., Arata Y. Trans. Jpn. Weld. Soc. 13:1982;41.
9. Rogberg B. Scand. J. Met. 12:1983;51.
10. Campbell J. Castings. 1991;Butterworth-Heinemann, Oxford.
11. Novikov I.I. Goryachelomkost tsvetnykh metallov i splavov (Hot shortness of non-ferrous metals and alloys). 1966;Nauka, Moscow. p. 299.
12. Sigworth G.K. AFS Trans. 104:1996;1053.
13. Spittle J.A., Cushway A.A. Metals Tech. 10:1983;6.
14. Ohm L., Engler S. Giessereiforschung. 42(4):1990;149.
15. Nedreberg ML. PhD thesis, University of Oslo, Oslo; 1991.
16. Boyle JP, Mannas DA, Walsh DW. In: Ferguson D, Jacon J, editors. Intern Symp on Physical Simulation. Poestenkill (NY, USA): Dynamic Systems; 1992. p. 165.
17. Spittle JA, Brown SGR, James JD, Evans RW. In: Proc 7th Intern Symp on Physical Simulation of Casting, Hot Rolling and Welding. Tsukuba: National Research Institute for Metals, 1997. p. 81.
18. Van Haaften W.-M., Kool W.H., Katgerman L. Ehrke K., Schneider W. Continuous casting. 2000;239 Wiley-VCH, Weinheim.
19. Farup I., Drezet J.-M., Rappaz M. Acta Mater. 49:2001;1261.
20. Forest B, Bercovici S. In: Proc Conference on Solidification Technology in Foundry and Cast House. Coventry (UK): Univ. Warwick Metals Society 1983; p. 607.
21. Zheng M, Suyitno, Katgerman L. In: Dinesen AR, Eldrup M, Juul Jensen D, Linderoth S, Ped- ersen TB, Pryds NH, et al., editors. Proc 22nd Risø Intern Symp on Materials Science. Risø Denmark): Risø National Laboratory; 2001. p. 455.
22. Novikov I.I., Novik F.S. Doklady Akad. Nauk SSSR, Ser. Fiz. 7:1963;1153.
23. Prokhorov N.N. Russian Castings Production. 2:1962;172.
24. Lees D.C.G. J. Inst. Met. 72:1946;343.
25. Korol'kov A.M. Casting properties of metals and alloys. 1963;Consultants Bureau, New York. p. 146.
26. Dodd R.A. Foundry Trade J. 1956;321.
27. Metz S.A., Flemings M.C. AFS Trans. 77:1969;329.
28. Clyne T.W., Davies G.J. British Foundrymen. 68:1975;238.
29. Rappaz M., Drezet J.M., Gremaud M. Metall. Mater. Trans. A. 30A:1999;449.
30. Petterson K. Giesserei. 40:1953;597.
31. Williams J.A., Singer A.R.E. J. Inst. Met. 96:1968;5.
32. Gilman JJ. In: Lee EH, Symonds PS, editors. Proc of 2nd Symposium on Naval Structural Mechanics. London: Pergamon; 1960. p. 43.
33. Orowan E. Murray W.M. Fatigue and fracture of metals. 1950;139 Technology Press of MIT, MA.
34. Niyama E. In: Japan-US joint seminar on solidification of metals and alloys. Tokyo: Japan Society for Promotion of Science; 1977. p. 271.
35. Feurer U. In: Nieswaag H, Schut JW, editors. Quality control of engineering alloys and the role of metals science. Delft: Delft University of Technology; 1977. p. 131.
36. Clyne T.W., Davies G.J. British Foundryman. 74:1981;65.
37. Katgerman L. JOM. 34(20):1982;46.
38. Drezet J.-M., Rappaz M. Anjier J.L. Light metals 2001. 2001;887 TMS, Warrendale (PA).
39. Braccini M., Martin C.L., Suéry M., Bréchet Y. Sahm P.R., Hansen P.N., Conley J.G. MCWASP IX. 2000;18 Shaker Verlag, Aachen.
40. Lankford W.T. Metall. Trans. 3:1972;1331.
41. Magnin B., Maenner L., Katgerman L., Engler S. Mater. Sci. Forum. 1209:1996;217-222.
42. Instone S., St John D., Grandfield J. Int. J. Cast. Metals Res. 12:2000;441.
43. Martin C.L., Favier D., Suéry M. Int. J. Plasticity. 15:1999;981.
44. Fredriksson H, Lehtinen B. In: Proc Conf on Solidification and Casting of Metals. Sheffield: University of Sheffield; 1979. p. 260.
45. Norton A. Trans. ASME. 8:1914;124.
46. Tamman G., Rocha H.J. Z. Metallkde. 6:1933;133.
47. Verö J. Metal Industry. 48:1936;431-491.
48. Singer A.R.E., Cottrell S.A. J. Inst. Met. 73:1946;33.
49. Pumphrey W.I., Jennings P.H. J. Inst. Met. 75:1948;203.
50. Novikov I.I., Matveeva K.T. Zavod. Lab. 11:1957;1362.
51. Prokhorov N.N., Bochai M.P. Svarochn. Proizvod. 2:1958;1.
52. Van Haaften W.-M., Magnin B., Kool W.H., Katgerman L. Eckert C.E. Light metals 1999. 1999;829 TMS, Warrendale.
53. Van Haaften W-M. PhD thesis, Delft University of Technology, Delft, 2002.
54. Chu MG, Granger DA. In: Beech J, Jones H, editors. Proc 4th Decennial Intern Conf on Solidification Processing, University of Sheffield, UK, 1997. p. 198.
55. Hall H.F. Iron and Steel Spec. Rep. 15:1936;65.
56. Gulyaev B.B. Liteinye protsessy (Casting processes). 1960;Mashgiz, Moscow.
57. Ackermann P., Kurz W. Mater. Sci. Eng. A75:1985;79.
58. Ohm L., Engler S. Giessereiforschung. 42(3):1990;131.
59. Dickhaus C.H., Ohm L., Engler S. AFS Trans. 101:1994;677.
60. Kubota M., Kitaoka S. AFS Trans. 81:1973;424.
61. Suvanchai P, Okane T, Umeda T. In: Beech J, Jones H, editors. Proc of 4th Decennial Intern Conf on Solidification Processing, University of Sheffield: Sheffield, UK, 1997. p. 190.
62. Suéry M., Martin C.L., Braccini M., Bréchet Y. Adv. Eng. Mater. 3(8):2001;589.
63. Wisniewski P. PhD thesis, University of Pittsburgh, Pittsburgh, 1990.
64. Nabulsi SM, Steinberg TA, Davidson CJ, Page NW. In: Proc of 4th Intern Conf on Semi-solid Processing of Alloys and Composites, University of Sheffield: Sheffield, UK, 1996, p. 47.
65. Sumitomo T., St John D.H., Steinberg T. Mater. Sci. Eng. A. 289:2000;18.
66. Kashirtsev L.P. Fiz. Khim. Neorgan. Mater. 1:1977;87.
67. Zhao L., Baoyin Wang N., Sahajwalla V., Pehlke R.D. Int. J. Cast. Metals Res. 13(3):2000;167.
68. Dahle A.K., Arnberg L. Acta Mater. 45(2):1997;547.
69. Iwasaki H., Mod T., Mabuchi M., Higashi K. Acta Mater. 48(18):1998;6351.
70. Nguyen T.G., Favier D., Suéry M. Int. J. Plasticity. 10(6):1994;663.
71. Nguyen T.G. PhD thesis, 1991 Institut National Polytechique de Grenoble, Grenoble, 1991.
72. Gébelin J.C., Suéry M., Favier D. Mater. Sci. Eng. A. 272:1999;134.
73. Tzimas E., Zavaliangos A. Acta Mater. 47:1999;517.
74. Pumphrey W.I., Lyons J.V. J. Inst. Met. 82:1953;33.
75. Qingchun L, Songyan Z, Chi L. In: Proc 7th Intern Conf on Strength of Metals and Alloys, vol 2, Montreal, Canada. Oxford: Pergamon Press; 1985. p. 1651.
76. Belov N.A., Aksenov A.A., Eskin D.G. Iron in aluminium alloys: impurity and alloying element. 2002;Taylor and Francis, London. p. 342.
77. Yang J.-G., Ou B.-L. Scand. J. Metall. 30:2001;146.
78. Rostoker W., McCaughey J.M., Markus H. Embrittlement by liquid metals. 1960;Reinhold, New York.
79. Campbell J. Metallogr. 4:1971;269.
80. Wray P.J. Acta Metall. 24:1976;125.
81. Lahaie D.J., Bouchard M. Metall. Mater. Trans. B. 32B:2001;697.
82. Novikov I.I., Novik F.S. Izv Vyssh Uchebn Zaved, Tsvetn Metall. 4:1965;131.
83. Eskine D., Zuidema J. Jr., Katgerman L. Int. J. Cast. Metals Res. 14:2002;217.
84. Novikov I.I., Grushko O.E. Mater Sci. Technol. 11:1995;926.
85. Singer A.R.E., Jennings P.H. J. Inst. Met. 73:1947;197.
86. Drezet J.-M. Journal de Physique IV. 9:1999;53.
87. Guven Y.F., Hunt J.D. Cast Metals. 1:1988;104.
88. Warrington D., McCartney D.G. Cast Metals. 2(3):1989;134.
89. Faray F., Kulunk B., Gruzleski J.E. Intern. J. Cast. Metals Res. 13:2000;147.
90. Langlais J., Gruzleski J.E. Mater. Sci. Forum. 167:2000;331-337.
91. Pumphrey W.I., Lyons J.V. J. Inst. Met. 74:1947;439.
92. Pumphrey W.I., Moore D.C. J. Inst. Met. 74:1947;425.
93. Jennings P.H., Singer A.R.E., Pumphrey W.I. J. Inst. Met. 74:1947;227.
94. Singer A.R.E., Jennings P.H. J. Inst. Met. 73:1947;273.
95. Warrington D., McCartney D.G. Cast Metals. 3(4):1991;202.
96. Healy A. Trans. Inst. Rubber Ind. 44:1926;334.
97. Farup I., Mo A. Metall. Mater. Trans. A. 31A:2000;1461.
98. M'Hamdi M., Mo A. Schneider W. Light metals 2002. 2002;709 TMS, Warrendale.
99. Suyitno Kool W.H., Katgerman L. Mat. Sci. Forum. 396-402:2002;179.
100. Grandfield J.F., Cameron D.J., Taylor J.A. Anjier J.L. Light metals 2001. 2001;895 TMS, Warrendale.
101. Suyitno Kool W.H., Katgerman L. Crepeau P.N. Light metals 2003. 2003;753 TMS, Warrendale.
102. Balandin G.F. Osnovy teorii formirovaniya otlivki (Fundamentals of the theory of casting formation), vol. 2. 1979;Mashinostroenie, Moscow. p. 335.