On structure and mechanical properties of ultrasonically cast Al-2% Al2O3 nanocomposite

Materials Research Bulletin

Volumn 44, Issue 5, 2009, Pages 1154-1160

  Mula, S ^a   Padhi, P ^a   Panigrahi, S C ^a   Pabi, S K ^a   Ghosh, S ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

A. Composites; C. Electron microscopy; D. Mechanical properties; D. Microstructure

Indexed keywords

ALUMINA; ALUMINUM; CARBON FIBER REINFORCED PLASTICS; COLD ROLLING; ELECTRON MICROSCOPES; GRAIN BOUNDARIES; HARDNESS; MECHANICAL PROPERTIES; MICROSTRUCTURE; NANOCOMPOSITES; TENSILE TESTING; TRANSMISSION ELECTRON MICROSCOPY; ULTRASONICS;

A. COMPOSITES; AVERAGE SIZES; C. ELECTRON MICROSCOPY; CROSS SLIPS; D. MECHANICAL PROPERTIES; D. MICROSTRUCTURE; DEFORMATION PROCESS; INTER-PARTICLE SPACINGS; NANO ALUMINAS; NANO-SIZED; OROWAN MECHANISMS; REDUCTION RATIOS; ROOM TEMPERATURES; STRENGTHENING MECHANISMS; TENSILE TESTS;

MECHANISMS;

EID: 61549105333     PISSN: 00255408     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.materresbull.2008.09.040     Document Type: Article

References (44)

1. Suryanarayana C., Ivanov E., and Boldyrev V.V. Mater. Sci. Eng. A 304-306 (2001) 151-158
2. Kiminami C.S., Basim N.D., Kaufman M.J., Amateau M.F., Eden T.J., and Galbraith G.J. Key Eng. Mater. 189-191 (2001) 503-508
3. Huda M.D., Hashmi M.S.J., and El-Baradie M.A. Key Eng. Mater. 104-107 (1995) 37-64
4. Ejiofor J.U., and Reddy R.G. JOM 49 (1997) 31-37
5. Gleiter H. Acta Mater. 48 (2000) 1-29
6. Inoue A. Prog. Mater. Sci. 43 (1998) 365-520
7. Koch C.C. Nanostruct. Mater. 9 (1997) 13-22
8. Lu K. Mater. Sci. Eng. R 16 (1996) 161-221
9. Das D., Chatterjee P.P., Manna I., and Pabi S.K. Scripta Mater. 41 (1999) 861-866
10. Datta M.K., Pabi S.K., and Murty B.S. J. Appl. Phys. 87 (2000) 8393-8400
11. Inoue A. Bulk Amorphous Alloys-Preparation and Fundamental Characteristics, Materials Science Foundation 4 (1998), Trans. Tech, Netherlands p. 1
12. Egami T. Mater. Sci. Eng. A 226-228 (1997) 261-267
13. RamchandraRao P. Z. Metallk 71 (1980) 172-177
14. Benameur T., Inoue A., and Masumoto T. Nanostruct. Mater. 4 (1994) 303-322
15. Eckert J. In: Koch C.C. (Ed). Properties and Potential Applications (2002), Noyes, New York 423-525
16. Weertman J.R. In: Koch C.C. (Ed). Mechanical Behavior of Nanocrystalline Metals, Nanostructured Materials-Processing, Properties and Potential Applications (2002), Noyes, New York 397-421
17. Groza J.R. In: Koch C.C. (Ed). Nanocrystalline Powder Consolidation Methods, Nanostructured Materials-Processing, Properties and Potential Applications (2002), Noyes, New York 115-178
18. Zhu J., Liu L., Zhao H., Shen B., and Hu W. Mater. Des. 28 (2007) 1958-1962
19. Fredriksson H., and Åkerlind U. Material Processing During Casting (2006), John Wiley & Sons Ltd. pp. 1-442
20. Hashim J., Looney L., and Hashmi M.S.J. J. Mater. Process. Technol. 92/93 (1999) 1-7
21. Lan J., Yang Y., and Li X. Mater. Sci. Eng. A 386 (2004) 284-290
22. Yang Y., Lan J., and Li X. Mater. Sci. Eng. A 380 (2004) 378-383
23. Eskin G.I., and Eskin D.G. Ultrason. Sonochem. 10 (2003) 297-301
24. P. Padhi, Experimental and Theoretical Studies on Particle Distribution in Cast Aluminium-Based Metal Matrix Composites, Ph.D. dissertation at I.I.T., Kharagpur, 2007.
25. Sawada H. Mater. Res. Bull. 29 (1994) 127-133
26. Pabi S.K., and Murty B.S. Mater. Sci. Eng. A 214 (1996) 146-152
27. Underwood E.E. Quantitative Stereology (1970), Addison-Wesley Publishing Company, Reading, Massachusetts p. 16
28. Fullman R.L. Trans. AIME 197 (1953) 447-452
29. MTS System Corporation (1999-2002), MTS-XP Test Works Manual 2001, Version No. 16, pp. 391-392.
30. Gurland J. Mater. Sci. Eng. 40 (1979) 59-71
31. In: Grayson M. (Ed). Encyclopedia of Glass, Ceramics, and Cement, Encyclopedia reprint series (1985), A Willey-Inter-science Publication, NY, USA 19
32. Barsoum M. Fundamentals of Ceramics (1997), McGraw-Hill p. 401
33. Dieter G.E. Mechanical Metallurgy (1988), McGraw Hill Book Company, (UK), London pp. 49, 154-155, 208-209, 217-220, 280-281
34. Hull D., and Bacon D.J. Introduction to Dislocations. 3rd ed. (1984), Pergamon Press, Oxford, UK pp. 151-152
35. Czyrska-Filemonowicz A., Wrobel M., Dubiel B., and Ennis P.J. Scripta Metall. Mater. 32 (1995) 331-335
36. Xun Y., Rodriguez R., Lavernia E.J., and Mohamed F.A. Met. Mater. Trans. A 36A (2005) 2849-2859
37. Xiang Y., and Srolovitz D.J. Phil. Mag. 86 (2006) 3937-3957
38. Arzt E., and Wilkinson D.S. Acta Metall. 34 (1986) 1893-1898
39. Rosler J., and Arzt E. Acta Metall. 36 (1988) 1043-1052
40. Arzt E., and Rosler J. Acta Metall. 36 (1988) 1053-1060
41. Rosler J., and Arzt E. Acta Metall. 38 (1990) 671-683
42. Calliard D., Mompiou F., Bresson L., and Gratias D. Scripta Mater. 49 (2003) 11-17
43. In: Brandes E.A., and Brook G.B. (Eds). Smithells Metals Reference Book. 7th ed. (1992), Butterworth-Heinmann, Oxford, UK pp. 13-10
44. Texier M., Bonneville J., Proult A., Rabier J., and Thilly L. Mater. Res. Soc. Symp. Proc. 805 (2004) 163-168