Advances in spouted bed drying of foods

Advances in Food Dehydration

Volumn , Issue , 2008, Pages 153-186

  Rocha, S C S ^a   Taranto, O P ^a  

^a UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 85123423986     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (69)

1. Abers, J.E. and Wrolstad, R.E., Causative factors of color deterioration in strawberry preserves during processing and storage, J. Food Sci., 44, 75-78, 1979.
2. Adamson, A.W., Physical Chemistry of Surfaces, John Wiley & Sons, New York, 1990.
3. Adeodato, M.G., Donida, M.W., and Rocha, S.C.S., Adhesion of an aqueous polymeric suspension to inert particles in a spouted bed, Dry. Technol., 22, 1069-1086, 2004.
4. Almeida, M.M., Silva, O.S., and Alsina, O.L.S., Fluid-dynamic study of deformable materials in spouted bed dryer, Dry. Technol., 24, 499-508, 2006.
5. Alsina, O.L.S., Lima, L.M.R., and Morais, V.L.M., Fluid-dynamic variables study of spouted bed drying of acerola pulp, in Proceedings of the XXIV Brazilian Congress of Particulate Systems (in Portuguese), Vol. 1, Barrozo, M.A.S. and Damasceno, J.J.R., Eds., Federal University of Uberlândia, Uberlândia, Brazil, 1996, pp. 289-294.
6. Benali, M. and Amazouz, M., Drying of vegetable starch solutions on inert particles: Quality and energy aspects, J. Food Eng., 74, 484-489, 2006.
7. Cavalcanti Mata, M.E.R.M., Effect of high temperature-short time stationary bed drying on the conditioning of bean seeds (Phaseolus vulgaris L.), "carioca" variety: Experimental analyzes modeling and simulation (in Portuguese), Ph.D. thesis, State University of Campinas, Campinas, Brazil, 1997.
8. Corrêa, N.A., Corrêa, R.G., and Freire, J.T., Self-tuning control of egg drying in spouted bed using GPC algorithm, Dry. Technol., 20, 813-828, 2002.
9. Costa, E.F. Jr., Cardoso, M., and Passos, M.L., Simulation of drying suspensions in spout-fluid beds of inert particles, Dry. Technol., 19, 1975-2001, 2001.
10. Cunha, R.L., de la Cruz, A.G., and Menegalli, F.C., Effects of operating conditions on the quality of mango pulp dried in a spout fluidized bed, Dry. Technol., 24, 423-432, 2006.
11. Dewettinck, K., Messens, W., Deroo, L., and Huyghebaert, A., Agglomeration tendency during top-spray coating with gelatin and starch hydrolysate, Lebensm.-Wiss. Technol., 32, 102-106, 1999.
12. Donida, M.W., Rocha, S.C.S., and Bartholomeu, F., Influence of polymeric coating suspension characteristics on the particle coating in a spouted bed, Dry. Technol., 23, 1-13, 2005.
13. Duarte, C.R., Murata, V.V., and Barrozo, M.A.S., Study of the spouted bed fluid dynamics using CFD, in Drying 2004-Proceedings of the 14th International Drying Symposium (IDS 2004), Silva, M.A. and Rocha, S.C.S., Eds., Ourograf, Campinas, Brazil, 2004, pp. 581-588.
14. Geldart, D., Gas Fluidization Technology, John Wiley & Sons, New York, 1986.
15. Hung-Nguyen, L., Driscoll, R.H., and Srzednicki, G., Drying of high moisture content paddy in a pilot scale triangular spouted bed dryer, Dry. Technol., 19, 375-387, 2001.
16. Inprasit, C. and Noomhorm, A., Effect of drying air temperature and grain temperature of different types of dryer and operation on rice quality, Dry. Technol., 19, 389-404, 2001.
17. Iveson, S.M., Litster, J.D., Hapgood, K., and Ennis, B.J., Nucleation, growth and breakage phenomena in agitated wet granulation process: A review, Powder Technol., 117, 3-39, 2001.
18. Kachan, G.C. and Chiapetta, E., Dehydration of tomato paste in a spouted bed dryer (in Portuguese), in Proceedings of the VIII Brazilian Congress of Chemical Engineering, Vol. 2, Pires, J.L.C., Ed., University of São Paulo, São Paulo, Brazil, 1988, pp. 510-523.
19. Kalwar, M.I., Kudra, T., Raghavan, G.S.V., and Mujumdar, A.S., Drying of grains in a drafted two dimensional spouted bed, J. Food Process Eng., 13, 321-332, 1991.
20. Kalwar, M.I. and Raghavan, G.S.V., Spouting of two-dimensional beds with draft plates, Can. J. Chem. Eng., 70, 887-894, 1992.
21. Kalwar, M.I. and Raghavan, G.S.V., Batch drying of shelled corn in two-dimensional spouted beds with draft plates, Dry. Technol., 11, 339-354, 1993.
22. Lima, A.C.C. and Rocha, S.C.S., Bean drying in fixed, spout and spout-fluid beds: Comparison and empirical modeling, Dry. Technol., 16, 1881-1902, 1998.
23. Lima, M.F.M. and Alsina, O.L.S., Drying of umbu pulp in spouted bed: Characteristic curves, in Drying '92, Mujumdar, A.S., Ed., Hemisphere Publishing, New York, 1992, pp. 1508-1515.
24. Lima, M.F.M., da Mata, A.L.M., Lima, L.M.F., and Moreno, M.T.S., Dehydration of beetroot (Beta vulgaris L.) in spouted bed, in Proceedings of the XII Brazilian Congress of Chemical Engineering (in Portuguese), Brazilian Association of Chemical Engineers, Ed., Federal University of Rio Grande do Sul, Porto Alegre, Brazil, CD, 1998.
25. Lima, M.F.M., Rocha, S.C.S., Alsina, O.L.S., Jerônimo, C.E.M., and da Mata, A.L.M., Influence of the material chemical composition on the spouted bed drying of fruit pulps performance, in Proceedings of the XIII Brazilian Congress of Chemical Engineering (in Portuguese), Maciel Filho, R. and Rocha, S.C.S., Eds., Sonopress-Rimo Ind. Com. Fonográfica Ltda., São Paulo, Brazil, CD, 2000.
26. Link, K.C. and Schlünder, E.U., Fluidized bed spray granulation and film coating. A new method for the investigation of the coating process on a single sphere, Dry. Technol., 15, 1827-1843, 1997.
27. Madhiyanon, T., Soponronnarit, S., and Tia, W., A two-region model for batch drying of grains in a two-dimensional spouted bed, Dry. Technol., 19, 389-404, 2001a.
28. Madhiyanon, T., Soponronnarit, S., and Tia, W., Industrial-scale prototype of continuous spouted bed dryer, Dry. Technol., 19, 207-216, 2001b.
29. Madhiyanon, T., Soponronnarit, S., and Tia, W., A mathematical model for continuous drying of grains in a spouted bed dryer, Dry. Technol., 20, 587-614, 2002.
30. Markowski, A.S. and Kaminski, W., Hydrodynamic characteristics of jet spouted beds, Can. J. Chem. Eng., 61, 377-381, 1983.
31. Marques, A.M.M., Influence of particle-suspension adhesion on the spouted bed coating with bottom atomization (in Portuguese), M.S. thesis, State University of Campinas, Campinas, Brazil, 2007.
32. Marques, A.M.M., Donida, M.W., and Rocha, S.C.S., Effect of solid surface energy on particles coating and suspension drying, in Drying 2006-Proceedings of the 15th International Drying Symposium, Farkas, I., Ed., Szent István University Publisher, Gödölló, Hungary, 2006, pp. 177-183.
33. Martinez, O.L.A., Brennam, J.G., and Nirajam, K., Spouted bed dryer for liquid foods, Food Control, 4, 41-45, 1993.
34. Martinez, O.L.A., Brennam, J.G., and Nirajam, K., Study on drying of food in a spouted bed with inert particles, in Proceedings of the 1st Ibero American Food Congress (in Spanish), Ortega-Rodríguez, E., Ed., Brazilian Society of Food Science and Technology, Campinas, Brazil, 1995, pp. 73-81.
35. Mathur, K.B. and Epstein, N., Spouted Beds, Academic Press, New York, 1974.
36. Medeiros, M.F.D., Rocha, S.C.S., Alsina, O.L.S., Medeiros, U.K.L., and da Mata, A.M.L., Drying of pulps of tropical fruits in spouted bed: Effect of composition on dryer performance, Dry. Technol., 20, 855-881, 2002.
37. Mujumdar, A.S., Spouted beds: Principles and recent developments, in Proceedings of the XVII Brazilian Congress of Particulate Systems, Vol. 1, Sartori, D.J.M. and Silveira, A.M., Eds., Federal University of São Carlos, São Carlos, Brazil, 1989, pp. 3-13.
38. Neumann, A.W. and Kwok, D.Y., Contact angle measurement and contact angle interpretation, Adv. Colloid Interface Sci., 81, 167-249, 1999.
39. Nindo, C.I., Sun, T., Wang, S.W., Tanga, J., and Powers, J.R., Evaluation of drying technologies for retention of physical quality and antioxidants in asparagus (Asparagus officinalis L.). Lebensm.-Wiss. Technol., 36, 507-516, 2003.
40. Oliveira, C.A., Study of bean (Phaseolus vulgaris L.) drying in spouted bed with intermittent operating conditions (in Portuguese), M.S. thesis, State University of Campinas, Campinas, Brazil, 1999.
41. Oliveira, I.M. and Passos, M.L., Simulation of drying suspension in a conical spouted bed, Dry. Technol., 15, 593-604, 1997.
42. Oliveira, J., Theoretical and experimental studies of solids and fluid flow in conical spouted beds (in Portuguese), M.S. Thesis., Federal University of Minas Gerais, Belo Horizonte, Brazil, 1997.
43. Pakowski, Z. and Mujumdar, A.S., Basic process calculations in drying, in Handbook of Industrial Drying, Mujumdar, A.S., Ed., Marcel Dekker, New York, 1995, pp. 71-112.
44. Pallai, E., Szentmarjay, T., and Mujumdar, A.S., Spouted bed drying, in Handbook of Industrial Drying, Mujumdar, A.S., Ed., Marcel Dekker, New York, 1995, pp. 453-488.
45. Pallai, E., Szentmarjay, T., and Szijjártó, E., Effect of partial processes of drying on inert particles on product quality, Dry. Technol., 19, 2019-2032, 2001.
46. Passos, M.L., Massarani, G., Freire, J.T., and Mujumdar, A.S., Drying of pastes in spouted beds of inert particles: Drying criteria and modeling, Dry. Technol., 15, 605-624, 1997.
47. Passos, M.L. and Mujumdar, A.S., Effect of cohesive forces on fluidized and spouted beds of wet particles, Powder Technol., 110, 222-238, 2000.
48. Patel, K., Bridgwater, J., Baker, C.G.J., and Schneider, T., Spouting behaviour of wet solids, in Drying '86, Mujumdar, A.S., Ed., Hemisphere Publishing, New York, 1986, pp. 183-189.
49. Pont, V., Saleh, K., Steinmetz, D., and Hemati, M., Influence of the physicochemical properties on the growth of solids particles by granulation in fluidized bed, Powder Technol., 120, 97-104, 2001.
50. Raghavan, V.G.S., Rennie, T.J., Sunjka, P.S., Orsat, V., Phaphuangwittayakul, W., and Terdtoon, P., Energy aspects of novel techniques for drying biological materials, in Drying 2004-Proceedings of the 14th International Drying Symposium (IDS 2004), Silva, M.A. and Rocha, S.C.S., Eds., Ourograf, Campinas, Brazil, 2004, pp. 1021-1028.
51. Ré, M.I. and Freire, J.T., Drying of pastelike materials in spouted beds, in Proceedings of the 6th International Drying Symposium (IDS88), Roques, M.A. and Mujumdar, A.S., Eds., Hemisphere Publishing, New York, 1988, pp. 426-431.
52. Reyes, A.E., Diaz, G., and Blasco, R., Experimental studies of slurries on inert particles in spouted bed and fluidized bed dryers, in Drying '96, Mujumdar, A.S., Ed., Hemisphere Publishing, New York, 1996, pp. 605-612.
53. Reyes, A.E., Diaz, G., and Blasco, R., Experimental studies of slurries drying on inert particles in fluid-particles contact equipment, in Proceedings of the Inter-American Drying Conference (IADC), Silva, M.A. and Rocha, S.C.S., Eds., Gráfica Paes, Campinas, Brazil, 1997, pp. 150-157.
54. Reyes, A.E. and Massarani, G., Evaluation of pastes drying in conical spouted beds, in Proceedings of the XXI Brazilian Congress on Particulate Systems (in Spanish), Vol. 2, Passos, M.L., Ed., Federal University of Minas Gerais, Belo Horizonte, Brazil, 1993, pp. 479-483.
55. Robins, P.T. and Fryer, P.J., The spouted bed roasting of barley: Development of a predictive model for moisture and temperature, J. Food Eng., 59, 199-208, 2003.
56. Sangkram, U. and Noomhorm, A., The effect of drying and storage of soybean on the quality of bean, oil and lecithin production, Dry. Technol., 20, 2041-2054, 2002.
57. Schneider, T. and Bridgwater, J., The stability of wet spouted beds, Dry. Technol., 11, 277-301, 1993.
58. Silva, C.M., Rodrigues, M.E. Jr., and Passos, M.L., Simulation of the fluid flow in conical spout-fluid beds (in Portuguese), Sci. Eng. J., 6, 55-62, 1997.
59. Spitzner Neto, P.I. and Freire, J.T., Study of pastes drying in spouted beds: Influence of the paste presence on the process, in Proceedings of the XXV Brazilian Congress of Particulate Systems, Vol. 1, Ferreira, M.C. and Freire, J.T., Eds., Federal University of São Carlos, São Carlos, Brazil, 1997, pp. 185-190.
60. Strumillo, C. and Kudra, T., Drying: Principles, Applications and Design, Gordon and Breach Science Publishers, Montreux, France, 1986.
61. Szafran, R.G. and Kmiec, A., CFD modeling of heat and mass transfer in a spouted bed dryer, Ind. Eng. Chem. Res., 43, 1113-1124, 2004.
62. Szafran, R.G. and Kmiec, A., Point-by-point solution procedure for the computational fluid dynamics modeling of long-time batch drying, Ind. Eng. Chem. Res., 44, 7892-7898, 2005.
63. Taruna, I. and Jindal, V.K., Drying of soy pulp (okara) in a bed of inert particles, Dry. Technol., 20, 1035-1051, 2002.
64. Tenou, E. and Poncelet, D., Batch and continuous fluid bed coating-Review and state of the art, J. Food Eng., 53, 325-340, 2002.
65. Tia, S., Tangsatitkulchai, C., and Dumronglaohapun, P., Continuous drying of slurry in a jet spouted bed, Dry. Technol., 13, 1825-1840, 1995.
66. Vieira, M.G.A., Estrella, L., and Rocha, S.C.S., Energy efficiency and drying kinetics of recycled paper in convective drying, in Proceedings of the 3rd Inter-American Drying Conference (IADC 2005), Orsat, V., Raghavan, G.S.V., and Kudra, T., Eds., Montreal, Canada, CD, 2005.
67. Wachiraphansakul, S. and Devahastin, S., Drying kinetics and quality of soy residue (okara) dried in a jet spouted bed dryer, Dry. Technol., 23, 1229-1242, 2005.
68. Wachiraphansakul, S. and Devahastin, S., Drying kinetics and quality of okara dried in a jet spouted bed of sorbent particles, Food Sci. Technol., 2, 207-219, 2007.
69. Wiriyaumpaiwong, S., Soponronnarit, S., and Prachayawarakorn, S., Soybean drying by two-dimensional spouted bed, Dry. Technol., 21, 1735-1757, 2003.