Injection effects in low load RCCI dual-fuel combustion

SAE Technical Papers

Volumn , Issue , 2011, Pages

  Splitter, Derek ^a   Hanson, Reed ^a   Kokjohn, Sage ^a   Wissink, Martin ^a   Reitz, Rolf ^a  

^a UNIVERSITY OF WISCONSIN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DUAL FUEL ENGINES; FUELS; HEPTANE; IGNITION; PARAFFINS; POLYOLS;

COMPRESSION IGNITION; DUAL FUEL COMBUSTION; HIGH TEMPERATURE HEAT RELEASE; INTAKE TEMPERATURE; LINEAR RELATIONSHIPS; MIXTURE PREPARATIONS; PORT FUEL INJECTIONS; SINGLE AND DOUBLE INJECTIONS;

DIRECT INJECTION;

EID: 85081775034     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2011-24-0047     Document Type: Conference Paper

References (35)

1. Kalghatgi, G., Risberg, P., and Ångström, H., "Partially Pre-Mixed Auto-Ignition of Gasoline to Attain Low Smoke and Low NOx at High Load in a Compression Ignition Engine and Comparison with a Diesel Fuel," SAE Technical Paper 2007-01-0006, 2007, doi: 10.4271/2007-01-0006.
2. Dec, J.E., Diesel-fueled HCCI engines. In: Zhao, F., Asmus, T.A., Assanis, D.N., Dec, J.E., Eng, J.E., Najt, P.A., (eds) Homogeneous Charge Compression Ignition (HCCI) Engines. SAE International, Warrendale, PA, 2003.
3. Kimura, S., Aoki, O., Kitahara, Y., and Aiyoshizawa, E., "Ultra-Clean Combustion Technology Combining a Low-Temperature and Premixed Combustion Concept for Meeting Future Emission Standards," SAE Technical Paper 2001-01-0200, 2001, doi: 10.4271/2001-01-0200.
4. Kimura, S., Aoki, O., Ogawa, H., Muranaka, S., et al., "New Combustion Concept for Ultra-Clean and High-Efficiency Small DI Diesel Engines," SAE Technical Paper 1999-01-3681, 1999, doi: 10.4271/1999-01- 3681.
5. Koci, C., Ra, Y., Krieger, R., Andrie, M., et al., "Detailed Unburned Hydrocarbon Investigations in a Highly-Dilute Diesel Low Temperature Combustion Regime," SAE Int. J. Engines 2 (1): 858-879, 2009, doi: 10.4271/2009-01-0928.
6. Hanson, R., Splitter, D., and Reitz, R., "Operating a Heavy-Duty Direct-Injection Compression-Ignition Engine with Gasoline for Low Emissions," SAE Technical Paper 2009-01-1442, 2009, doi: 10.4271/2009-01-1442.
7. Hardy, W., "An Experimental Investigation of Advanced Diesel Combustion Strategies for Emissions Reductions in a Heavy-Duty Diesel Engine at High Speed and Medium Load" M.S. Thesis, University of Wisconsin-Madison, 2005.
8. Kamimoto, T., and Bae, M., "High Combustion Temperature for the Reduction of Particulate in Diesel Engines," SAE Technical Paper 880423, 1988, doi: 10.4271/880423.
9. Akihama, K., Takatori, Y., Inagaki, K., Sasaki, S., et al., "Mechanism of the Smokeless Rich Diesel Combustion by Reducing Temperature," SAE Technical Paper 2001-01-0655, 2001, doi: 10.4271/2001-01-0655.
10. Manente, V., Tunestal, P., Johansson, B., and Cannella, W., "Effects of Ethanol and Different Type of Gasoline Fuels on Partially Premixed Combustion from Low to High Load," SAE Technical Paper 2010-01-0871, 2010, doi: 10.4271/2010-01-0871.
11. Turns, S. R., "An introduction to Combustion: Concepts and Applications" WCB/McGraw-Hill, Boston, 2000.
12. th edition, Springer Berlin Heidelber, New York, 2006
13. Heywood, J.B., "Internal Combustion Engine Fundamentals" McGraw-Hill, New York, 1988
14. Dec, J., and Yang, Y., "Boosted HCCI for High Power without Engine Knock and with Ultra-Low NOx Emissions-using Conventional Gasoline," SAE Int. J. Engines 3 (1): 750-767, 2010, doi: 10.4271/2010-01-1086.
15. Kokjohn, S., Hanson, R., Splitter, D., and Reitz, R., "Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending," SAE Int. J. Engines 2 (2): 24-39, 2010, doi: 10.4271/2009-01-2647.
16. Hanson, R., Kokjohn, S., Splitter, D., and Reitz, R., "An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-Duty Engine," SAE Int. J. Engines 3 (1): 700-716, 2010, doi: 10.4271/2010-01-0864.
17. Ando, H., Sakai, Y., and Kuwahara, K., "Universal Rule of Hydrocarbon Oxidation," SAE Technical Paper 2009-01-0948, 2009, doi: 10.4271/2009-01-0948.
18. Westbrook, C. K., Chemical Kinetics of Hydrocarbon Ignition in Practical Combustion Systems" Proceedings of the Combustion Institute, Volume 28, 2000 /pp. 1563-1577
19. Shibata, G., and Urushihara, T., "Auto-Ignition Characteristics of Hydrocarbons and Development of HCCI Fuel Index," SAE Technical Paper 2007-01-0220, 2007, doi: 10.4271/2007-01-0220.
20. Shibata, G., Oyama, K., Urushihara, T., and Nakano, T., "Correlation of Low Temperature Heat Release With Fuel Composition and HCCI Engine Combustion," SAE Technical Paper 2005-01-0138, 2005, doi: 10.4271/2005-01-0138.
21. Bessonette, P., Schleyer, C., Duffy, K., Hardy, W., et al., "Effects of Fuel Property Changes on Heavy-Duty HCCI Combustion," SAE Technical Paper 2007-01-0191, 2007, doi: 10.4271/2007-01-0191.
22. Hanson, R., Kokjohn, S., Splitter, D., and Reitz, R., "An Experimental Investigation of Fuel Reactivity Controlled PCCI Combustion in a Heavy-Duty Engine," SAE Int. J. Engines 3 (1): 700-716, 2010, doi: 10.4271/2010-01-0864.
23. Kaiser, E.W., Yang, J., Culp, T., Xu, N., Maricq, N.M., "Homogeneous charge compression ignition engine-out emission-does flame propagation occur in homogeneous charge compression ignition?" Int. J. Eng. Res. 3 (2002) 185-195, 2002.
24. Dec, J., and Sjöberg, M., "A Parametric Study of HCCI Combustion-the Sources of Emissions at Low Loads and the Effects of GDI Fuel Injection," SAE Technical Paper 2003-01-0752, 2003, doi: 10.4271/2003-01-0752.
25. Curran, H.J., Gaffuri, P., Pitz, W.J., Westbrook, C.K., "A comprehensive modeling study of iso-octane oxidation" Combust. Flame 129 (3) (2002) 253-280.
26. Walton, S.M., He, X., Zigler, B.T., Wooldridge, M.S., and Atreya, A., "An Experimental Investigation of Iso-octane Ignition Phenomena" Department of Mechanical Engineering, University of Michigan, 2350 Hayward St., Ann Arbor, MI, USA 48109-2125.Submitted as a Full-Length Article to Combustion and Flame January 27, 2006).
27. Inagaki, K., Fuyuto, T., Nishikawa, K., Nakakita, K., et al., "Dual-Fuel PCI Combustion Controlled by In-Cylinder Stratification of Ignitability," SAE Technical Paper 2006-01-0028, 2006, doi: 10.4271/2006-01-0028.
28. Eng, J., "Characterization of Pressure Waves in HCCI Combustion," SAE Technical Paper 2002-01-2859, 2002, doi: 10.4271/2002-01-2859.
29. Puduppakkam, K., Liang, L., Naik, C., Meeks, E., et al., "Use of Detailed Kinetics and Advanced Chemistry-Solution Techniques in CFD to Investigate Dual-Fuel Engine Concepts," SAE Int. J. Engines 4 (1): 1127-1149, 2011, doi: 10.4271/2011-01-0895.
30. Abani, N., Munnannur, A., and Reitz, R.D., "Reduction of numerical parameter dependencies in diesel spray models" ASME Internal Combustion Engine Division 2007 Fall Technical Conference, vol. 130, no. 3 2008
31. Ekoto, I., Colban, W., Miles, P., Park, S., et al., "UHC and CO Emissions Sources from a Light-Duty Diesel Engine Undergoing Dilution-Controlled Low-Temperature Combustion," SAE Int. J. Engines 2 (2): 411-430, 2010, doi: 10.4271/2009-24-0043.
32. Pickett, L., Siebers, D., and Idicheria, C., "Relationship Between Ignition Processes and the Lift-Off Length of Diesel Fuel Jets," SAE Technical Paper 2005-01-3843, 2005, doi: 10.4271/2005-01-3843.
33. Splitter, D., Kokjohn, S., Rein, K., Hanson, R., et al., "An Optical Investigation of Ignition Processes in Fuel Reactivity Controlled PCCI Combustion," SAE Int. J. Engines 3 (1): 142-162, 2010, doi: 10.4271/2010-01-0345.
34. th US National Technical Meeting of the Combustion Institute, March 20-23, 2011
35. Splitter, D., Reitz, R., and Hanson, R., "High Efficiency, Low Emissions RCCI Combustion by Use of a Fuel Additive," SAE Int. J. Fuels Lubr. 3 (2): 742-756, 2010, doi: 10.4271/2010-01-2167.